Find Verified Titanium Ingot Suppliers, Manufacturers and Wholesalers

1. Product name: Titanium Dioxide, Anatase titanium dioxide; Rutitle titanium dioxide
2. Chemical Formular: TiO2
3. CAS No.: 13463-67-7
4. Type: Anatase titanium dioxide; Rutitle titanium dioxide
5. Origin: China(mainland)
6. Transportation: By sea
7. Usage: It is widely used in aqueous and solvent-based exterior paints, electro-deposition paints, plastics, rubber, printing ink, high quality paper, waxed paper and leather finishes, cosmetics etc.
8. Package: Net 25 kg PP bag
9. Specification:
Item Titanium Dioxide Rutile Type Titanium Dioxide Anatase Type
Content 93%Min 98%Min
Tint Redusing Power 100% Min 100% Min
Oil Absorption (g/100g) 22 Max 26 Max
pH value 6.5-8.0 6.5-8.0
45 um SieveResidue 0.1%Max 0.1%Max
Water-soluble Matter 0.3%Max 0.5Max .


25kg/pag.

Sponge Cleaning Ball can clean the concrete pump to remove biological dirt and highly viscous biological dirt.Suitable for stainless steel tube and titanium alloy tube heat exchanger.Used for cleaning copper pipe, titanium pipe, stainless steel pipe, carbon steel pipe.Proper descaling shall be selected and put into the filling chamber from the hand hole of the loading chamber. The number of pitches shall be about 10% of the number of condenser cooling water pipes.Open to receive the net - ball first, and then start the pump, and open the bleed valve on the ball room, row after the ball indoor air, close the discharge valve, open again to send the ball in the middle of the ball valve, pipe when the water running slowly open the switch valve ball room, switching, shoulds not be too hard in the circulating water flow driven into the condenser water chamber.In the import and export under the action of pressure difference of circulating water sediment dirt, wash the cooling tube to a brush wipe of the cooling tube, the cooling pipe inner surface sediment fouling out, with the current of the circulating water driven into the net, in under the net bar, will be separated, pumped out heavy scored the ball room, according to the law of the reciprocating cycle for continuous cleaning of the condenser cooling water pipe.

Product Name
ASME B16.5 flange
Size
DN15~1500, 1/2"~60"
Pressure rating
150#~2500#, PN16~PN160
Standard
ASTM 403, ASME/ANSI B16.9, B16.28, EN/DIN2605, JIS ,GB/T12459,GB/T13401, SH3408(Seamless), SH3409(Welded)
Materials
304/304L ,304H,316/316L, 316H,321,321H,347,347H, 310S(2520), 31254, 32750, 2205, Copper alloy, Titanium alloy.
Applications
Petroleum, Chemical, Power, Gas, Metallurgy, Shipbuilding, Construction, Oil etc
Type
RF, FF, WN, RTJ, RJ SW.

(1) Non-Sparking, Corrosion-Resistant,Aluminum Bronze Alloy,Die Forged, Precision Casting, Cold Rollde;(2)Specially designed kits for storage.(3) Package included : 5/16"*3";Phillips Screwdriver #2*4";Wrench, Adjustable 6",10";Hammer,Claw 0.45kg;Pliers, Water Pump 10";Knife, Putty 1-1/4"*3-9/16"; Knife Common 3-1/8"; Pliers Adjustable Combination 6"; Wrench, pipe(American Type) 10" .(4)Spark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces.(5)The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapours or combustible residues are present.(6) Aluminium-bronze spark resistant safety tools are manufactured to 25HRC and offer a breaking strain of 75 - 85kgf/mm2. Spark-resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark-resistant properties, is essential.

High Hardness,Corrosion Resistant,Die forged.(3) Used to tighten or loosen large bolts and nuts.(4). Black finish.(5) Spline design allows numerous fastener head uses.(6)This wrench has both a closed and open end that fit over same-sized hex or square heads of nuts or bolts.(7)Meets DIN 3113 requirement.

We can provide the wrenches with size 17mm to 150mm
1. Designed for use where flammable or combustible vapors, liquids, dust or residue are present.
2. This Non-Sparking wrench helps protect against the hazards of mechanical sparks, friction and impact sparks. It performs safety and exceptionally in most volatile environments.
3. These two gripping faces are displaced to a 15 degree angle relative to the metal handle, offering easy operation.
4. Meets OSHA, NFPA, and MSHA requirements
5. Non-Sparking, Corrosion Resistant
6. Die Forged, Aluminum Bronze Alloy

We can provide the wrenches with size 17mm to 150mm
1. Designed for use where flammable or combustible vapors, liquids, dust or residue are present.
2. This Non-Sparking wrench helps protect against the hazards of mechanical sparks, friction and impact sparks. It performs safety and exceptionally in most volatile environments.
3. These two gripping faces are displaced to a 15 degree angle relative to the metal handle, offering easy operation.
4. Meets OSHA, NFPA, and MSHA requirements
5. Non-Sparking, Corrosion Resistant
6. Die Forged, Aluminum Bronze Alloy

Specifications
1. solvent Yellow 14 dyes
2.water resistant well
3.heat resistant well
4,CAS:842-07-9
yellow 14
Product Description
Color Index: Solvent Yellow 14
Structures: sulphonazo series
Foreign Corresponding Product: Fat Orange R(HOE),Somalia Orange GR(BASF)
Properties: The product is orange transparent oil solvent dye. It is of good heat resistance, good light resistance and strong coloring power, and its color is bright.
Use: mainly used in coloring of shoes cream, floor wax, plastic, resin, printing ink and in color separation of oil products, also used in making fireworks and transparent paint.

PS
HIPS

ABS

PC

RPVC

PMMA

SAN

AS

PA6

PET

















-

-

Note: "" Superior ,"" Applicable ,"" Not Recommended.
Physical properties, light fastness and Recommended Dosage:


Density(g/cm3)
Melting Point()

sublimation point ()

light fastness (in PS)

recommended Dosage

transparent

Nontransparent

0.3

132

202

5-6

0.025

0.05

Light Fastness: Consist of 1st to 8th grade, and the 8th grade is superior, the 1st grade is bad.
The thermal resistance in PS can reach to 260.
Degree of pigmentation: 0.05% dyes+0.1%titanium white powder

Product Description
High Frequency Welded Stainless Steel Spiral Fin Tube Extruded Wound Finned Tube Aluminum/ Copper Fins

Finned Tube Aluminum Fins Heat Exchanger Tube Product Description

The spiral fin tube economizer is a newly type heat transfer equipment, consisting of spiral fin tubes to overcome the serious abrasion and short service time.Which consisted of series of spiral finned tubes, the headers of inlet and outlet, bend, frame and other auxiliaries

Structure arrangement: in line/staggered arrangement

Finned Tube Aluminum Fins Heat Exchanger Tube Features

1. The equipment body can be designed into many modules to ensure the long term and stable running.

2. Compact structure which can enlarge the heat exchanging area in order to add the heat transfer area and less leakage.

3. Improve the heat transfer efficiency.

4. Structure arrangement: In line or staggered arrangement.


Finned Tube Aluminum Fins Heat Exchanger Tube Application

Aftercoolers, air coolers, air heaters, charge air chillers, condensers, convection heaters, electric heaters, evaporators, fluid coolers, gas coolers, heat pipes, hydrogen coolers, industrial tumble dryers, intercoolers, immersion heaters, oil coolers, radiators, refrigeration, solvent recovery and steam to air heat exchangers.



Technical parameters

PRODUCT TYPE TUBE MATERIAL FIN MATERIAL TUBE SIZE FIN SIZE
Heat Exchanger Finned Tube Extruded Fin Tube All Kind of Material can be applied Aluminum A1100 15.88~50.8 7~11.5FPI
Fin Height Max 16mmH
L-Foot Fin Tube All Kind of Material can be applied Copper C1100, C1220 12.70~50.8 7~11.5FPI
(Wrap On Type) Fin Height Max 16mmH
G-Fin Tube (Embedded Type) Aluminum A1100, A1050, A1060
High Frequency Welded Finned Tube A179 Carbon Steel Tube Carbon Steel Tube 12.70~160 1.5~7FPI
Stainless Steel Tube Stainless Steel Tube 0.8~3.2mm. Thickness
Alloy Steel Material Alloy Steel Material
Integral Copper & Copper Alloy High Finned Tube C12200, C11000, C70600 C12200, C11000, C70600 15.88~22.23 5~9FPI
Max 12mm. H
Oval Finned Tube Carbon Steel Tube Carbon Steel Tube All Size Available 5~15FPI
Stainless Steel Tube Stainless Steel Tube
Alloy Steel Material Alloy Steel Material
Copper & Copper Alloy Tube Copper & Copper Alloy Tube
Monometallic Fin Tube Low Fin Tube Carbon Steel, stainless steel, titanium, copper, brass, nickel alloy, etc. -- 9.52~40 12, 16, 19 28 FPI, etc.
Turbo-C Tube
Turbo-E Tube
Corrugated Tube All Kind of Material -- 6.35~40 2~9FPI
High Frequency Welded Stainless Steel Spiral Fin Tubes Carbon Steel Spiral Finned Tubes Factory Provided

Description of Spiral Finned Tubes:

The spiral fin steel pipes currently used are mostly wound, high frequency welded and brazed spiral fin steel pipes.
High Frequency Welded Stainless Steel Spiral Fin Tubes Carbon Steel Spiral Finned Tubes Factory Provided