Taiwancast inc. Has much talent and experience in providing rf connectors and related crimping tools for the telecom, central office, broadcast, military aerospace, and instrumentation markets worldwide. Mmcx series connectors are smaller than the mcx. The reliable snap-on mating design offers low rf-leakage. So, these small dimensions allow you to use the connectors where space requirements are critical.
Yuhchang, established in april 1967, is one of large capacitor professional manufacturers in taiwan. The capacitors are designed to be used in medium to high frequency induction heating power supplies. They are conduction cooled via the busbar.
Our control system can be connected with dimmable led driver and it is controlled by our remote controller with dimming
Brightness function, snap & fade & flash color function, color speed function, 7 colors display for white, red, green, blue, yellow, magenta, cyan. Each current loading for our r, g and b channels can take is 6w, which make the one single channel to 18w ( max 300w ). Please understand that this controller can operates 12v or 24v and we can offer you a complete set of remote controller, receiver and led strips and synchronize for you up to 200w
Product Features:
-TUV certified
-Product for crystalline solar module
-Alternative connecting method for ribbon to contact rail : clip or soldering
Technical Feature:
Version:4 Contact Rails/2 Contact Rails
Overall dimensions:102 x 63 x 22 mm (L x W x H)
Rated voltage:1000V DC
Rated current:25A
Wire Size Range 2.5 - 4 mm2
Contact material:Copper, tin plated
Insulation material:TPE/PPO
Temperature range:-40íp+ 85óJ
Protection class:Class II
Degree of protection:IP65
Flame class:UL94-V0
Approval: TUV certified
Product Features & Benefits:
-MC3 connector compatible
-Low insertion/high withdrawal force
-Easy assembly for field installation
-High current capacity
-Low contact resistance
-Low temperature rise
-UV and ozone resistant
-TUV certified
-Fully complied with RoHS standard
-Made in Taiwan
Technical Feature:
Pin/Socket insulator: Ø 3 mm
Cable cross-section: 2.5íp4 mm2
Rated current: 20A
Rated voltage: 1000V
Test voltage: 6kV
Contact resistance: 0.5 mú[
Contact material: Cu/Tin plated
Connecting system: Crimp connection
Overvoltage category/Pollution degre: III/3
Cable outer diameter: Ø 5.1íp6.4 mm
Insulation Material: TPE/PA
Degree of protection: IP67
Safety class: II
Flame class: UL94-HB/UL94-V0
Insertion force: í+50 N
Withdrawal force: í+50 N
Ambient temperature range: -40íp+ 85óJ
Upper limiting temperature: 125óJ
PCM3-11 Male panel connector
PCF3-11 Female panel connector
Product Features & Benefits
MC3 connector compatible
Compatible to common drillings and mounting holes
Low insertion/high withdrawal force
High current capacity
Low contact resistance
Low temperature rise
UV and ozone resistant
TUV certified
Fully complied with RoHS standard
Made in Taiwan
Technical Feature:
Pin/Socket insulator Ø 3 mm
Cable cross-section 2.5íp4 mm2
Rated current 20A
Rated voltage 1000V
Test voltage 6kV
Contact resistance 0.5 mú[
Contact material Cu/Tin plated
Overvoltage category/Pollution degree III/3
Insulation Material PA
Degree of protection IP67
Safety class II
Flame class UL94-V0
Insertion force/Withdrawal force í+50 N/í+50 N
Connecting system Crimp connection
Ambient temperature range -40íp+ 85óJ
Upper limiting temperature 125óJ
Product Features & Benefits
MC3 connector compatible
For safe and simple parallel or series-parallel connection of PV-modules
High current capacity
Low contact resistance
Low temperature rise
UV and ozone resistant
TUV certified
Fully complied with RoHS standard
Made in Taiwan
Technical Feature:
Pin/Socket insulator: Ø 3 mm
Rated current: 20A
Rated voltage: 1000V
Test voltage: 6kV
Contact resistance: 0.5 mú[
Contact material: Cu/Tin plated
Overvoltage category/Pollution degree: III/3
Insulation Material: PA
Degree of protection: IP67
Safety class: II
Flame class: UL94-V0
Ambient temperature range: -40í+ 85óJ
Upper limiting temperature: 125óJ
Insertion force/Withdrawal force: 50 N/í+50 N
Introduction
1.Low D.F.
2. High stability against frequency and temperature variation.
3. Suitable for high frequency and/or pulse application.
4. Negative temperature coefficient.
5. Non-inductive construction.
6.Low equivalent series resistance.
Specification:
1.Operating temperature : -40óxc ~ + 85óxc
2.Capacitance range : 0.001~0.68uf
3.Capacitance tolerance : í=1%(f), í=2%(g), í=5%(j), í=10%(k)
4.Rated voltage : 50/100vdc. 250vdc. 400vdc. 630vdc.
5.Dissipation factor :0.08%max at 1khz, 25óxc
Axial Features
1. Quick transient design
2. High Precise Capacitance ±3%, ±5%
3. Very Low Dielectric absorption factor
4. Very Low Dissipation factor
5. Very Low ESR
6. Very Low Inductance
7. Excellent handling of high current audio pulses
Features
1. related IC's needs of the wireless/portable systems.
2. Lower profile, lower loss and higher Current in Compact Size is the design guide of our principles to design such inductors which made by unique automatic process.
3. Industry standard size and various load spacing available.
Applications
1. Consumer Electronics, , Power Management, Industrial, Medical
2. High-frequency applications including mobile phones, Portable Devices,Bluetooth
3. GSM, CDMA, PDC
jb Capacitors manufactures SMD Aluminum Electrolytic Capacitor. JCK 1000H to 2000H at 105C Chip Aluminum Electrolytic Capacitor is one of the most common series, we sell quite good prices, high quality and with short lead time. Following are 105�°C SMD Aluminum Electrolytic Capacitor features, specifications and drawing.
Chip type, operating with wide temperature range -40~+105C.
Designed for surface mounting on high density circuit board.
Emboss carrier tape packing system is available for automatic insertion.
175 Electric Components Suppliers
Short on time? Let Electric Components sellers contact you.
