Hot melt adhesive
The many leather finishing available in the market each with its own characteristic and is therefore not easy to distinguish.
Pieri leather finishing are the combination of experience and high technology after many years of research and experiments.
Before putting into production, our experienced engineers to study their manufacturing lines to find out the causes of various damages to leather surface.
For example the heating and cooling process may cause leather to become lustrousless, partial elongation, coarse grains
As a result of such research and experiment, pieri have created with proud a range of most reliable and suitable leather finishing which are widely accepted and used by leather products manufacturers
Sintamide
High-quality hot-milt polyamide adhesive, with excellent flexbility andsize good setting time.
Drawn and sized in 4.0 and 4.2 mm. Diameter rod.
For use with heel seat and side lasting machind.
Sintecol
Elastomer base hot-melt achesive
Available in blocks protected with silicone paper, for the glueing of inner soles in leather, pressed card-board, polypropulene to various natural and synthetic materials
Features & Functions: :
* Vertical sliding saw head ensures stable and precise cutting ( Circular Saw )
* Backlash eliminating device prolongs the life of saw blade
* Counter Balance System for maximum stability through the entire cut
* Patented Floating Feeding Carriage for superior cutting length accuracy and smooth material handling
* Rigid and reliable clamping vise provides secure material holding
* Automatic lubrication system maintains good work performance
* Circulating cooling system results in smooth cutting surfaces and longer blade life
* Electronic Saw blade protection cover for safety operation
* Built-in chips tray for convenient cleaning and maintenance.
Works on both valves still seated or removed.
Precision machined seal driving adapter guide the seal
Set proper setting.
Set contains:
1-valve stem seal plier
1-drive handle 6"( 150mm ) long
2-deep seal driving socket for seals o.D. 10.8-14.8mm
7-seal driving adapter fit seals 5, 5.5, 6, 6.6, 7, 8 & 3/8"
1.Under-Counter Chiller
2.Suitable for Tank with pressure and non pressure
3.Beauty and elegance of our designs,coupled of our designs,coupled with fashion & practical
4.Air-Cooled (no need drainage) reduce co2 emissions
5.Panasonic ELCB safety equipment
6.American UL insulation material
7.R-134A refrigerant
Model No.:BD-3005
Type: Not include fancets
Tank Capacity:Cold: 1.2L
Watt:Cold:170W
Water connection:Tap Water
Power:110V, 60Hz ; 220/240V , 50Hz
Dimension:18x32x37cm
Weight:12kg
RO or Filtration System:filtration system hang-outside
Safety Design:
1. Panasonic ELCB safety equipment
Mini Non- Nozzle Vacuum Sealer is made in Stainless construction.
Keeps fresh and preserves longer without freezer. Store clothing scent-free.
Commercial-Grade Vacuum Sealer with an extra large Teflon Bar for sealing bags up to 300~400mm, Double piston vacuum-pump, can preserve foods 5-6 times longer than traditional methods.
Easy to use, bright LED lights let your monitor the stages of the sealing.
Equipped with a see-thru acrylic vacuum lid for perfect bag alignment while sealing.
It equipped with a fan-cooled motor Ideal for Channelled (embossed) & gusset Vacuum bag.
Specification:
Model: WVM-305 - WVM-405
Voltage: AC 110V/220V/240V 1phase
Power (Watt.): 750W - 935W
Max. sealing: 5mm*300mm - 5mm*400mm
Vacuum time: 0-99 sec.
Sealing Time: 0-6.0 sec.
Cooling Time: 0-10 sec.
Dimension: 395*310*140 (mm) - 485*310*150 (mm)
Materials: Channelled (embossed) & gusset Vacuum bag
Weight: 10KG - 12KG
Under Counter Water Ionizer
1.Alkaline Water Ionizer
(Made in Japan by Hitachi Maxell)
2.Unique Electrodes Design Patent!!
3.Automatic Reverse Cleaning Design Patent!!
4.Automatic indicator alert for built-in filter replacement
5.TUV certification
Advanced Technology
Automatic reversed cleaning during Electrolyzing by 1/50 second.
All BUDER water ionizers are MADE IN JAPAN by Hitachi Maxell,Ltd. (old Kyushu Hitachi Maxell, Ltd.), and the electrodes are "Platinum Electrode plates" with HitachiI unique patent and High-End Perfect Platinum PFC" Technology for electrodes surface treatment.
Hitachi unique patent- Perfect Platinum PFC" surface treatment Technology!
The platinum electrodes plates are treated by very fine electroplating one time and then second time treated by Sintering.
Sintering is an effective process to reduce the porosity and enhances properties such as strength, electrical conductivity, translucency and thermal conductivity.
The platinum electrodes after two times surface treatment, the form of electrodes thickness are thicker than other manufacturer. It brings the best performance which is the best water ionizer in the world.
Also the UF membrane mixed with silver carbon filter cartridges for our water ionizers are MADE IN JAPAN by Hitachi Maxell,Ltd. too.
BUDER Water Ionizers are certified by TUV / ISO13485, and the UF membrane mixed with silver carbon filter cartridges are certified by JIS / SGS, has the best quality in the world.
Model No.:HI-TAQ7
Type:Under Counter
ORP:Max.-1000mv
PH value:2.7~10.5
Electrodes:7 Platinum plate
Watt:250W
Flow Rate:Max. 3.8L/minute
Cleaning System:each second automatic reverse cleaning for 1/50second (3600times per hour)
Faucet Size:12x25x26cm (dia.22cm)
Dimension: 24x13x32cm
Weight:5.7kg
Filter Material:Silver activated carbon combined with UF membrane 0.01um, certified by JIS(JAPAN)/ SGS(TAIWAN)
Filter Lifetime:12000 Liters
Certification:TUV / ISO13485 / SGS
Application of 28.6 mm taper handlebars
ETH
7075 T6 or 6061 T6 aluminum alloy tube úr28.6 mm Taper úr22.2 mm.
The bars have a 1 1/8í¿ (28.6) diameter at the clamp area.
Shot peened and anodized finish to increase fatigue life.
Under Counter RO Water System
1.Reverse Osmosis Water System
2.Remove dirt, particle, odor, chlorine
3.All filter materials are food grade
4.Reverse Osmosis Water System
5.The prodact are have liability insurance
6.Faucet & installation kit included
7.Easy Maintenance
Model No.:RO-NS41
Type:Undersink
1st Stage:Pre-filter 5 Micron PP filter
2nd Stage:CTO Carbon Block filter
3rd Stage:Pre-filter 1 Micron PP filter
4th Stage:FILMTEC RO Membrane
5th Stage:Post Carbon filter
Storage Tank:3.2 gallons steel tank
Power:Pump with transformer 110/220VAC
RO Dimension:26x27x45.5cm
Tank Dimension:30x30x42cm
Weight:8kg
Remark:Faucet & installation kit included
