Features
- Compliant with SFF-8431 SFP+ MSA
- Compliant with IEEE802.3ae 10G BASE-SW/SR
- 850nm VCSEL transmitter
- PIN photo-detector
- 2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface for optical transceivers
- All-metal housing for superior EMI performance
- Low power consumption
- Advanced firmware allow customer system encryption information to be stored in transceiver
- Cost effective SFP+ solution, enables higher port densities and greater bandwidth
- RoHS Compliant
Applications
- High-speed storage area networks
- Computer cluster cross-connect
- Custom high-speed data pipes
- Inter Rack Connection
The 100G optical transceivers series include different form factors such as QSFP28 and CFP4. Optechâ??s 100G Transceivers includes QSFP28-SR4, QSFP28-LR4, QSFP28-ER4, QSFP28-BIDI, QSFP28-PSM4 and QSFP28-IR4. It offers connecting solution from 100m to 40km for data centers, high speed network and 5G. The name of the 100G QSFP28 comes from the fact that its electrical interface can handle four channels of 25G each, potentially up to 28G.
Features
- Hot pluggable QSFP28 MSA form factor
- Compliant to IEEE 802.3ba 100GBASE-LR4
- Supports 103.1Gb/s aggregate bit rate
- Up to 10km reach for G.652 SMF
- Single +3.3V power supply
- Operating case temperature: 0~70â??
- Transmitter: cooled 4x25Gb/s LAN WDM DFB
TOSA (1295.56, 1300.05, 1304.58, 1309.14nm)
- Receiver: 4x25Gb/s PIN ROSA
- 4x25G electrical interface (OIF CEI-28G-VSR)
- Maximum power consumption 4.0W
- Duplex LC receptacle
- RoHS-6 compliant
Applications
- 100GBASE-LR4 Ethernet Links
- Infiniband QDR and DDR interconnects
- Datacenter and Enterprise networking
Optechs 10G Transceivers series includes SFP+ Transceivers, XFP Transceivers, XENPAK Transceivers and X2 Transceivers.
10G SFP+, XFP, XENPAK, X2 transceivers are designed for 10G network applications including OC192/STM-6 SONET/SDH, 10G Fiber Channel, 10Gbps Ethernet and related applications, such ad BIDI, CWDM and DWDM fiber optic networks.
Typical types of 10G transceivers are SR (300m), LR (10km), ER (40km) and ZR (80km). The 10G SFP+ transceivers also includes the 10G SFP+ LRM that supports link up to 1.5km over single mode LC duplex connectors.
Features
- Supports Links up to 30m using Cat 6a/7 Cable
- Compliant with IEEE 802.3az
- Compliant with SFF-8431 and SFF-8432 MSA
- Low Power Consumption (2.5W MAX @ 30m)
- Auto-negotiates with other 10GBase-T PHYs
- I2C 2-Wire Interface for Serial ID and PHY Register Access
- Auto-sense MDI/MDIX
- RoHS Compliant
- Operating temperature range: 0 C to 70 C
Optech 100gbps qsfp28 transceivers are is a high-density, high-speed product solution designed for applications in the telecommunications, data center and networking markets. It supports 4 channels at 25gpbs per channels. Our qsfp28 transceivers have high reliability and performance, which can increase density and optimize your networkings capability.
Features
- compliant with ieee802.3z
- gigabit ethernet standard
- compliant with ieee802.3ae 10gbase
- compliant with sonet oc-192 sr-1 sdh stm i64.1
- class 1 laser product complies with en 60825-1
- rohs compliant
Applications
- telecommunications
- datacenter
- network interface
- test and measurement equipment
Optechs 400G QSFP-DD Transceivers includes QSFP-DD SR8, QSFP-DD LR4 and QSFP-DD DR4.
The 400G QSFP-DD Transceiver follows the same port densities system as the QSFP and QSFP28, but the QSFP-DD will support eight lanes instead of four lanes for the QSFP and QSFP28, which double the density.
Each of the eight lanes will operate a data rate up to 50Gb/s providing a 400Gb/s data speed and increasing the capacity of the QSFP28 by four. The 400G QSFP-DD MSA published that the size of the optical transceivers enables to put 36 ports in one switch slot, accumulating 14.4 Tbp/s in one slot.
Features
* QSFP-DD MSA compliant
* 8 parallel lanes on 850nm center wavelength
* Compliant to IEEE 802.3bs Specification
* Up to 100m transmission on multi-mode fiber
(MMF) OM3 with FEC
* Operating case temperature: 0 to 70�°C
* 8x53.125Gb/s electrical interface (400GAUI-8)
* Data Rate 53.125Gbps (PAM4) per channel.
* Maximum power consumption 12W
* MPO-16 connector
* RoHS compliant
Applications
* Data Center Interconnect
* 400G Ethernet
* Infiniband interconnects
* Enterprise networking
99 Networking Internet Peripherals Suppliers
Short on time? Let Networking Internet Peripherals sellers contact you.
QSFP-DD stands for Quad Small Form Factor Pluggable Double Density. The 400G QSFP-DD Transceiver follows the same port densities system as the QSFP and QSFP28, but the QSFP-DD will support eight lanes instead of four lanes for the QSFP and QSFP28, which double the density.
Each of the eight lanes will operate a data rate up to 50Gb/s providing a 400Gb/s data speed and increasing the capacity of the QSFP28 by four. The 400G QSFP-DD MSA published that the size of the optical transceivers enables to put 36 ports in one switch slot, accumulating 14.4 Tbp/s in one slot.
Multi-mode Transceivers
Multi-mode transceivers are the low cost transceivers. QSFP-DD SR8 use more expensive non-standard MPO connectors which cancel out some of the cost savings of the multi-mode transceiver.
400G QSFP-DD SR8
The 400G QSFP-DD SR8 transceiver supports connections of up to 100 meters over multi-mode fiber and uses MPO connectors. The wavelength is 850nm. It is compliant with the QSFP-DD MSA.
Single-mode Transceivers
Single-Mode transceivers are more expensive than multi-mode transceivers but they allow to reach longer distance.
400G QSFP-DD DR4
The 400G QSFP-DD DR4 transceiver supports connections of up to 500 meters over single-mode fiber and uses MPO connector. The wavelengths is 1310nm. It is compliant with the QSFP-DD MSA.
400G QSFP-DD DR4+
The 400G QSFP-DD DR4+ supports connections of up to 2 kilometers over single-mode fiber and uses MPO connector. The wavelengths is 1310nm. It is compliant with the QSFP-DD MSA.
400G QSFP-DD LR4
The 400G QSFP-DD LR4 transceiver supports connections of up to 10 kilometers over single-mode fiber and uses LC connectors. The wavelengths are 1296 to 1309nm. It is compliant with the QSFP-DD MSA.
400G QSFP-DD Loopback
The 400G QSFP-DD Loopback is a cost effective and high quality solutions to test 400G QSFP-DD transceivers ports.
A9500N is one of the smallest NB-IoT modules in LCC castellation packaging with the compact size of 24.0 Ã?? 26.0 Ã?? 2.3mm, ultra low power consumption and extended temperature range. Designed for use in NB-IoT network, A9500N enables connect to the Internet at DL and UL data speed up to 200kbps. In the area where NB-IoT service are not available, A9500N still enables reliable and secure data connect over EGPRS network.
To save space on the application platform, A9500N comes as an extremely slim and compact module. This makes it ideally suited for a broad range of mobile computing devices, and particularly offers easy integration with AMI, Security, Intelligent Buildings and other M2M application.
General features
* NB-IoT Tri-bandB3/B5/B8
* EGPRS Dual-bandB5/B8
* Control via AT commands(GSM07.05,GSM07.07,V.25TER,GPRS, and enhanced AT commands)
* Supply voltage range 3.1V-4.2V
* Low Power consumption
- eDRX mode:
The SIM7000E is Tri-Band LTE-FDD and Dual-Band GPRS/EDGE module solution in a SMT type which supports LTE CAT-M1(eMTC) and NB-IoT up to 375kbps data transfer.
It has strong extension capability with rich interfaces including UART, USB2.0, GPIO etc. The module provides much flexibility and ease of integration for customer's application.
The package of SIM7000E is compatible with SIM900 and SIM800F. AT commands of SIM7000E are mostly compatible with SIM800F. This also maximizes the investments of customers, and enables a short time-to-market.
It is designed for applications that need low latency, medium throughput data communication in a variety of radio propagation conditions. Due to the unique combination of performance, security and flexibility, this module is ideally suited for M2M applications, such as metering, telematics, asset tracking, remote monitoring ,E-health , mobile pos terminals and sharing bike.
General features
* Tri-Band FDD-LTE B3/B8/B20
* GPRS/EDGE 900/1800Mhz
* Output power
- GSM900: 2W
- DCS1800: 1W
* Control Via AT Commands
* Supply voltage range: 3.0V~ 4.3V, Typ: 3.8V
* Operation temperature: -40â?? to +85â??
* Dimensions: 24 X 24 X 2.6mm
* Weight: 3.0g
* GNSS (GPS,GLONASS and BeiDou/Compass, Galileo, QZSS)
Specifications for Data transfer
* LTE CAT-M1(eMTC)
- Uplink up to 375kbps, Downlink up to 300kbps
* NB-IoT
- Uplink up to 66kbps, Downlink up to 34kbps
* EDGE Class
- Uplink up to 236.8Kbps, Downlink up to 236.8Kbps
* GPRS
- Uplink up to 85.6Kbps, Downlink up to 85.6Kbps
Other features
* USB Driver for Microsoft Windows XP/Vista/7/8
* USB Driver for Windows CE/Mobile
* USB Driver for Linux/Android
* Firmware update via USB
* TCP/IP
* PPP
* SMS
* EMAIL
* FTP/HTTP/SSL
* VoLTE*
* FOTA*
4G with SIM card holder is a wireless module which is designed for the global market. It is a consumptive product; It can be designed in many kinds of applications which can work on LTE-FDD/UMTS/GSM/GPS/GLONASS(Optional) network.
On LTE-FDD network, 4G with SIM card holder enables connect to the Internet at DL data speed up to 150Mbps and UL data speed up to 50Mbps. In the area where LTE service are not available, 4G with SIM card holder still enables reliable and secure data connect over 3G(UMTS) or 2G(GSM) network.
4G with SIM card holder provides SMS, MMS, Phonebook functions as well as high speed access, and also audio function. It can be designed in many kinds of applications. Such as Data card, Video monitor, Tablet, Electric-book, MID, Vehicle equipment, etc.
General features:
EDGE multi-slot class 33
GPRS multi-slot class 33
Compliant to GSM phase 2/2+
Output power:
- Class 3 (0.25W) for LTE/UMTS
- Class 4 (2 W) for GSM 900
- Class 1 (1 W) for GSM 1800
Control via AT commands
(3GPP TS27.005/3GPP TS27.007 )
Supply voltage range 3.3V- 4.2V
Low Power consumption
- Sleep mode: 3mA
- Power down: 16 �¼A
Dimensions: 51.0Ã??30.0Ã??4.6mm
Operation Temperature: -40�°C to +85�°C
MSL : 3
Band Configuration
LTE-FDD Band 1/3/5/7/8/20/28
LTE-TDD Band 38/40
UMTS Band 1/5/8
GSM Band 3/8
Specifications for GNSS
GPS frequency: 1575.42MHz
At least support 44 channels
Sensitivity
- Acquisition: -158dBm
- Tracking: -162dBm
TTFF
- Cold Start: 28s
- Warm Start: 18s
- Hot Start: 1s
Specifications for data
Support Release 11 Category 4
LTE-FDD up to 150 Mbps DL,50 Mbps UL
LTE-TDD up to 130 Mbps DL,35 Mbps UL
DC-HSPA+ up to 42.2Mbps DL,5.76Mbps UL
EDGE class 33: 296Kbps DL,236.8Kbps UL
GPRS class 33: 107kbps DL,85.6kbps UL
CSD up to 14.4 kbps
Non transparent mode
PBCCH support
PPP-stack
Coding schemes CS 1,2,3,4
FOTA
TCP/IP
NDIS
Specifications for SMS
Point-to-point Mo and MT
SMS cell broadcast
Text and PDU mode
SIM7600X-H-PCIE is a complete multi-band LTE-FDD/LTE TDD/HSPA+/UMTS/EDGE/GPRS/GSM module solution in Mini PCIE type which supports LTE CAT4 up to 150Mbps for downlink and 50Mbps for uplink data transfer.It is combined with a SIM7600X-H (LCC) module and a Mini PCIE adapter board.
Target market: EMEA/Korea/Thailand
SIM7600E-H-PCIE
* Support 4G LTE FDD Band B1/B3/B5/B7/B8/B20 and TDD Band B38/B40/B41
* Support 3G UMTS/HSPA+ B1/B5/B8
* Support 2G GSM/GPRS/EDGE B3/B8
* GSM/GPRS/EDGEB3/B8
General features
* Mini PCIE package
* Control Via AT Commands
* Supply voltage range: 3.0V~ 3.6V, 3.3V Typical
* Operation temperature: -40â??to +85â??
* Bandwidth: 1.4/3/5/10/15/20MHz
* 3GPP E-UTRA Release 11
* Dimensions: 50.8*31*5.35mm
* Weight: 12.6g
Specifications for Data transfer
* LTE Downlink up to 150Mbps, Uplink up to 50Mbps
* HSPA+ Downlink up to 42Mbps, Uplink up to 5.76Mbps
* WCDMA Downlink/Uplink up to 384Kbps
* EDGE Downlink/Uplink up to 236.8Kbps
* GPRS Downlink/Uplink up to 85.6Kbps
Other features
* USB Driver for Microsoft Windows 2000/XP/Vista/Win7/Win8/Win10
* USB Driver for Linux /Android
* RIL supporting for Android 2.4/4.0/5.0/6.0/7.0
* MBIM to Win8
* Firmware update via USB
* TCP/IP/IPV4/IPV6/Multi-PDP/FTP/FTPS/HTTP/HTTPS/SMTP/SMTPS/DNS
* SSL3.0/TLS1.0/TLS1.2
* DTMF (Sending and Receiving)
* Audio Playing
* USB Audio and VoLTE
* FOTA
* eCall*
Interfaces
* USB2.0 with High speed up to 480Mbps
* UART
* GPIO
* Antenna: Solder pads for Primary, Rx-diversity and GNSS antennas
* (U)SIM card (1.8V/3.0V)
* Digital Audio through PCM
* Analog Audio (Optional)
* Embedded SIM card socket (Optional)
* GNSS: GPS/GLONASS/Beidou/Galileo*
FEATURES
+/- 48V DC input; 24V Passive PoE output
Provide power and access to device at the same time
Power-in/Power-out LED display
Easy-Positioning design, simple installation for vertical or horizontal direction
Dual (DC-in/battery) input power redundancy
OVERVIEW
PSE151DG is a 48V to 24V Gigabit PoE injector that it is flexible and convenient to be powered by a DC connector and Terminal block as redundant dual-Input design.
The easiest way to bring people the great ideas, projects and sharing together by simply plug in and tap to share. Users also can share the contents on the IOS/ Android mobile devices on the presentation screen without complicated cables set-up, no need to wait for a long time to take part in and no software installation requests.
With this wireless share system it really bring users a simple, efficient, interactive and super easy and smooth way to hold the meetings, presentations and brain storm.
FEATURE
*Support Win7/8/10�Apple Mac OS operating systems.
*Solving the annoying problem that always needs to copy the presentation files to the PC which connected with projector before conference start.
*Presenters can doing presentations on their seats through the wireless or Ethernet cable to projecting the contents. [Wireless transmitting distance: Up to 30 meters in the accessible environment.]
*Solving the problem that tablet or smart phone can not doing projecting in the traditional way. [Android tablet or smart phone can download the application from receiver main unit directly.]
*Mobile wireless projecting makes presentation and lecture more brilliant and vivider.
*Perfect apply in small and medium size meeting room or multimedia classroom to achieve wireless application new era.
Features:
-Support HD video 1080p and PC 1920 x 1080 @ 60Hz resolution.
-Based on Gigabit IP Ethernet, all standard -Gigabit or Fiber LAN switches can be used for inter-connection. Easy cabling, easy installation, and easy maintenance.
-Support One-to-One (Uni-Cast) and One-to-Many (Multi-Cast) applications.
-Support 4 x USB over IP devices for the KVM extension, you can attach keyboard, mouse, storage, speaker, microphone at the Receiver site to control the PC at the Transmitter site.
-Built-in USB sound card, you can directly connect speaker and microphone on the Receiver.
-Both HDMI and VGA Receivers are available, it is possible to mix HDMI Transmitter with VGA -Receiver in the same network.
-Support IR and RS232 options, you can use the IR remote controller at Receiver site to control the set-top box at the Transmitter site.
-Support remote ON/OFF option, you can remote switch ON/OFF at the Receiver site to the PC at the Transmitter site.
-Pure hardware design, plug-and-play, no additional software installation is required.
-Windows based Management Software is available for TX/RX connection management.
Material: Metal
Weight: 625 g
Dimension: 191x122x35 mm.
Deliver Power up to 328ft (100m)
Plug and Play installation
Max 30W output power
Simplified the installation of Ethernet based devices
Compliant with IEEE802.3at
Auto Detection and protection of non-standard Ethernet terminal .
Deliver Power up to 328ft (100m)
Plug and Play installation
8 ports PoE
Simplified the installation of Ethernet based devices
Auto Detection and protection of non-standard Ethernet terminal
Pass Through Data Rates : 8-Port 10/100 Mbps.
Deliver Power up to 328ft (100m)
IEEE802.3af Standard compliant
Plug and Play installation
Output Voltage selectable (5/9/12V)
Simplified the installation of Ethernet based devices.
Enable the non-PoE devices get power from PoE Switch.
Deliver Power up to 328ft
High-speed data transfer of up to 200Mbps via electrical wiring
Enable data transmission through existing home power grid
Smart power saving technology for improved power efficiency
Provides a noise-filtered
Compliant with the HomePlug Powerline Alliance industry specifications
4 Ports 10/100Mbps Ethernet Switch (PL-204)
Utmost slim and light design
Ideal for residential users.
Sc-4301-3gr hsdpa / hsupa / evdo a / modem wifi router
Is the first true wireless access router, supports wifi and ethernet gateway in one device. It
Offers wireless broadband wan hspa connection with data rate up to 7.2mbps.
On local area network (lan), it supports both the wireless wifi 802.11b/g and wire ethernet
10/100mbps interfaces. Users can connect the internet by wan port, or insert the service
Provider sim card by build-in the hspa wireless module.
Built in the hspa wireless module, just insert the service provider sim card.
High-speed data connections with rate up to 7.2mbps
Nat & napt with vpn pass-through virtual server
Automatic receipt of ip address with dhcp server
5 led indicator x 5(pwr, 3g, wifi, wan & lan)
Browser-based configuration and easy set-up wizard
Access control to manage users
User-friendly configuration and diagnostic utilities
Industry-leading firewall security
Supports 802.11b/g·+frequency from 2.4ghz to 2.483ghz·+access points, routers and
Gateway server applications , wireless up to 32 pc users
Technical specifications
Wireless wan:
Sim card interface,
Hspa wireless modem,
Built-in the module, the function are as follows:
Sc-4301-3gr-a·ªthe module is uc864-g (msm6280):
Tri-band umts 850/1900/2100 mhz
Quad-band gsm/ edge 850/900/1800/1900 mhz
7.2mbps (download) and 384kbps (upload) .
Dimension & weight·ª
Dimension: 136*125*36mm; weight 310g (contains the antenna).
Scmr-1000 3g/3.5g mobile ap router offers the ability to share mobile broadband access at speeds up to 3.6mbits/7.2mbits and 802.11g connected stations from anywhere. They are compatible with 3g/3.5g mobile signal.
Dimensions:h: 133 x w: 90 x d: 24 mm.
Weight:275g.
99 Networking Internet Peripherals Suppliers
Short on time? Let Networking Internet Peripherals sellers contact you.
