Food processing industry's production processes are prone to microbial contamination due to continual contact with foreign surfaces and water in several cases.Hence, it is very important to choose a suitable disinfectant which effectively addresses the sanitation challenges in food plants. Poor sanitation of food contact surfaces has been a contributing factor to outbreaks of food borne diseases. These outbreaks are caused by pathogens in food, especially Listeria monocytogenes, Escherichia coli or Staphylococcus aureus. Inadequate sanitation of surfaces facilitates rapid soil building, which in the presence of water shapes an ideal precondition for bacterial biofilm forming. Biofilm is considered to pose a significant health risk in the dairy industry because it can harbor pathogens, and direct contact with them can lead to food contamination.
Why ClO2 is the best disinfectant for Food & Beverage Processing?
ClO2 provides excellent microbiological control in flume waters, packaging operations and process disinfection.
Due to its broad-spectrum anti-microbial activity and versatility, chlorine dioxide is the ideal biocide for every bio-security programme. ClO2 kills against a wide range of microorganisms over shorter periods of contact time. This product minimizes corrosion to processing equipment, tanks, lines, etc., as it is a true dissolved gas in water when compared to chlorine.ClO2 will not influence the taste of the food and beverage processed. And it won't generate any toxic organic or inorganic by-products like bromates. This makes chlorine dioxide the most eco-friendly biocide that can be used.
ClO2 products have become more widely used in the food industry, predominantly in the sanitizing of hard surfaces of equipment, floor drains, and other areas to greatly reduce the microbial load in these areas.
Corrosion and scale inhibitor is an important water treatment agent, which is mainly used in circulating cooling water system, such as power plants, chemical plants, central air conditioning, etc. to prevent scale formation and metal corrosion. These products are usually compounded from a variety of ingredients, including chelating agents, dispersants, corrosion inhibitors, etc., which work together to achieve the effect of scale and corrosion inhibition.
What are Corrosion Inhibitors and Scale Inhibitors?
Corrosion and scale inhibitors are specially tailored chemicals that, when added at low concentrations in water, delay or prevent the formation of scale, which would normally form in water. Corrosion and scale inhibitors are similar to preventing scaling in washing machines, and similar chemicals are used. Ultimately, inhibition can be achieved by adding substances that react with the potential scaling material to achieve a thermodynamically stable region, or by adding substances that inhibit crystal growth. The use of these chemicals is therefore attractive because very low doses (a few ppm) are sufficient to prevent prolonged fouling of surfaces or equipment treatments. The exact mechanism of scale inhibitors is not fully understood.
Stabilized Chlorine Dioxide (SCD) is commonly used as a disinfectant, water treatment agent and bleach. Unlike highly reactive, unstable chlorine gas, Stabilized Chlorine Dioxide is a stable liquid form, usually a solution of sodium chlorite combined with an acid, such as citric or hydrochloric acid, to activate the chlorine dioxide. When activated, it releases chlorine dioxide gas, which is highly effective in eliminating bacteria, viruses and other pathogens.
Single Component ClO2 Powder is a stabilized powder form of chlorine dioxide releasing material. It produces chlorine dioxide only when contacted with water or exposed to moisture air. Simply mix the powder into water, we can get chlorine dioxide solution.
Low viscosity, modified cyclo-aliphatic polyamines epoxy curing agent. It has been designed for use in solvent-less coatings and leveling floorings where excellent flow, moderate pot life, good colour stability and high gloss films are required.
It has been designed for use in solvent-less coatings and leveling floorings where excellent flow, moderate pot life, good colour stability and high gloss films are required.
A low viscosity, modified cyclo-aliphatic polyamines epoxy curing agent. It has been designed for use in solvent-less coatings and leveling floorings where excellent flow, good adhesion and high gloss films are required.
A high viscosity, reactive polyamide resin designed for use with liquid epoxy resins to achieve cure at room temperature.
It is suitable for use in adhesives, civil engineerings, high solids anti-corrosive coatings for marine and maintenance coatings where excellent adhesion, good flexibility and toughness, good water and corrosion resistance are required.
Modified cycloaliphatic amine intended for use as a room temperature curing agent for liquid epoxy resins special features of this curing agent include its low viscosity, light colour, good colour stability and high gloss.
A polyaminoamide curing agent for liquid epoxy resin to achieve slow cure at ambient temperarure. It has a high molecular weight and provide the cured products with high orders of flexibility
adhesion good chemical and water resistance. The major applications are for general adhesives civil engineering and construction.
A polyaminoamide curing agent for liquid epoxy resin to achieve fast cure at ambient temperarure. It has a high molecular weight and provide the cured products with high orders of flexibility adhesion good chemical and water resistance. The major applications ofare for general adhesives civil engineering and construction.
A low viscosity, modified aliphatic polyamines epoxy curing agent. It has been designed for use in solventless coatings and leveling floorings where excellent flow, good adhesion and high gloss films are required.
A self-emulsifiable type epoxy curing agent The mixture with liquid type epoxy resin provides stable emulsion, and can be used for pollution-free coating containing no solvents in its system. Outstanding is penetrating power into absorbent concrete, steel plate and other inorganic substrates. Among them , it is a water dilutable, such application as concrete primer is most recommendable.
A self-emulsifiable type epoxy curing agent The mixture with liquid type epoxy resin provides stable emulsion, and can be used for pollution-free coating containing no solvents in its system. Outstanding is penetrating power into absorbent concrete, steel plate and other inorganic substrates. Among them , as it is a water dilutable, such application as concrete primer is most recommendable.
KINGCURE X-2001 is a mannish type Epoxy Resin hardener. Based on aromatic amine
developed for low viscosity fast curing.
KINGCURE X-2001 can be used in all normal amine reactions . It is a slightly yellow
product and has only limited solubility in water.
The reactivity with epoxy resin is so high that no accelerator are required The cure takes
place at high atmospheric humidity at temperature down to 5and even under water.
KINGCURE 367-KV is a modified aromatic polyamines type curing agent
for liquid epoxy resin.
Itis a medium viscosity and pot life, The surface hardness is more than
KINGCURE X-165A to the mixed resin .The major applications solventless
coatings and leveling floorings where excellent
flow, good adhesion and high gloss films are required.
KINGCURE 800-C is a mercaptan terminated liquid polymer which is imparts rapid-cure
characteristics to epoxy resins in combination with selected amines these systems are unique in
that they also provide rapid cure rates at low temperatures and thin film ,application in
construction adhesives(Bonding compounds)5min fast-setting adhesives.
KINGCURE N-768 is a rapid room temperature curing agent for epoxide resins.
It is a stable
liquid activated amine of particular use for solvent-free coatings, floor patch repair
kids,fast-setting adhesives,cold weather patching compounds and as an accelerator
for other amine and polyamide cures
KINGCURE B-311 is a low viscosity, modified cyclo-aliphatic polyamines epoxy curing agent.
It has been designed for use in solvent-less coatings and leveling floorings where excellent flow,
good adhesion and high gloss films are required.
Viscosity (mPa s , 25C) 300 ~ 700.
340 Chemicals Allied Products Suppliers
Short on time? Let Chemicals Allied Products sellers contact you.
