OSSEOUS Sizer is used to measure the distance between any two points of middle ear cavity which is to be connected using a prosthesis. For instance, In a Stapedioplasty surgery, the exact distance between the long process of the Incus and the footplate can be measured using the Osseous Sizer and accordingly the Osseous surgical implants can be trimmed using Osseous Cutter .
Important information for use
OSSEOUS Sizer is equipped with a pointer for the precise measurement of prosthesis for middle ear reconstruction and tympanoplasty. In order to measure two point, hold the instrument like a pen and position the tab at end of the needle at the level of the first point. With your index finger push the button until the mandrel coming out of the needle reaches the second point. Distances are indicated in Point millimeters on the instrument's handle. This instrument is made completely of stainless steel which can be sterilized or autoclaved.
Osseous cutter is used to trim the Osseous Surgical implants to optimal length in accordance with the patient's anatomical condition and surgical requirement.
The following prosthesis can be trimmed using this cutter:
PORP (E1101, E1207)
TORP (E1102, E1208)
Stapes Piston (E1103, E4119, E9131, E5120, E1121)
Instructions for osseous cutter
Osseous Cutter is having 3 parts:
1. Cutting Block
2. Lever
3. Shortening Blade
Cutting Block consists:
1. Station for Disk (For Partial Cup or Total Cup Assembly with Disk)
2. Station for Stapes Piston for easy handling.
3. Lever is having sharp edge for cutting the Prosthesis.
Shortening Blade consists:
1. various length steps from 1.50mm to 5.00mm (Hole Length - H.L.)
2. Two holes on each step (0.4)mm diameter for Stapes Piston & 0.3mm diameter for Partial Cup/Total.
Cutting action - osseous cutter
Cutting PORP
The required length is exact the length of Hole (H.L.). Means if 3.5 mm length of Partial Cup required, Surgeons can easily insert Partial Cup into 3.5 mm Hole and cut excess length by just pressing down the lever.
Cutting TORP
The required length is Hole Length (H.L.) + 1.00 mm. Means if 4.5 mm length of Total Cup required, Surgeons can easily insert Total Cup into 3.5 mm Hole and cut excess length by just pressing down the lever. So the length will be 3.5 mm + 1.0 mm i.e. 4.5 mm.
2.4MM Distal Radius variable Angle Volar Locking Plates Titanium Left 3 Holes -2 PCs
2.4MM Distal Radius variable Angle Volar Locking Plates Titanium Left 4 Holes -1 PCs
2.4MM Distal Radius variable Angle Volar Locking Plates Titanium Left 5 Holes -2 PCs
Cortical screws self-tapping 2.4mm Length 10mm To 28mm Each 5 50 PCs
Cortical screws self-tapping 2.4mm Length 10mm To 28mm Each 5 50 PCs
Total : 10 Plates & 100 Screws With Instruments Kit
After your purchase you will receive a same item as shown in the picture
Osseous ENT Burs are designed for giving the flexibility to treat a wide range of ENT conditions and anatomies from precise excision in delicate areas to rapid removal of large and bulky lesions.
Design Benefits:
Used to cut, drill and polish the bones
Heavy material removal
Easier, more thorough bur cleanup
Lower temperatures during use
Centerless ground for better balance
Less stress on handpiece and surgeon
Osseous ENT Burs are designed for giving the flexibility to treat a wide range of ENT conditions and anatomies from precise excision in delicate areas to rapid removal of large and bulky lesions.
Design Benefits:
Used to cut, drill and polish the bones
Heavy material removal
Easier, more thorough bur cleanup
Lower temperatures during use
Centerless ground for better balance
Less stress on handpiece and surgeon
Osseous ENT Burs are designed for giving the flexibility to treat a wide range of ENT conditions and anatomies from precise excision in delicate areas to rapid removal of large and bulky lesions.
Design Benefits:
Used to cut, drill and polish the bones
Heavy material removal
Easier, more thorough bur cleanup
Lower temperatures during use
Centerless ground for better balance
Less stress on handpiece and surgeon
Osseous ENT Burs are designed for giving the flexibility to treat a wide range of ENT conditions and anatomies from precise excision in delicate areas to rapid removal of large and bulky lesions.
Design Benefits:
Used to cut, drill and polish the bones
Heavy material removal
Easier, more thorough bur cleanup
Lower temperatures during use
Centerless ground for better balance
Less stress on handpiece and surgeon
Rosen Inserter
ENT Instruments
This is used to hook out wax or foreign bodies from the ear canal as well Developed with surgeons to aid grommet insertion. Slight band from the end so grommet insert in to TM precisely and quickly. The geometry also proven favorable for removal of objects in the ear.
Design Benefits:
Easy to handle than other inserter
Helps to remove object from ear
Good strength and flexible
Reduces the risk of injury in other part of the ear
Micro Alligator Ear Forceps
ENT Instruments
Micro ear forceps is a long, thin, angular handles and a small hinged jaw on the end with heavy interlocking teeth which is useful in grasping small particles or removing items from ear canal. Serrated edges minimizes the overall pressure created, resulting in significantly less harm.
Design Benefits:
Useful during ear examinations
Ideal for surgical procedure in the ear
Easy handling tissue or sterile dressings
Moving sterile dressings in a hard-to-reach area after surgery
The forceps are also effective in placing implants in the ear
Titanium Stapes Piston with Integrated PTFE Shoe is connected between Long Process of incus and the footplate. PTFE Shoe is larger in size which covers maximum of Footplate of the stapes (at the oval window).
Design Benefits
Larger size of PTFE shoe gives more stability.
PTFE resists integration.
Stable design gives maximum sound output.
Reduces risk of extrution.
Titanium Stapes Piston with Integrated PTFE Shoe is MRI Compatible.
Easy to handle and insert into the Stapes Footplate.
Easily trimmable with surgical knife.
Clip means a flexible device which holds objects in place. This principle is used in Clip Stapes piston is one of the most efficient and effective solution for stapedioplastly. Clip Stapes piston simply clipped on the â??Long processâ?? of incus and does not encircle the incus so improves the vascular supply of incus.
Design Benefits
Clip shape like loop provides secure attachment on incus.
Improves the vascular supply of incus.
No need to crimp piston.
Reduces risk of osteo-necrosis.
Clip Stapes Piston is MRI Compatible.
Eliminates the process of stapes piston fixation.
Maximizes hearing result because of clip loop is not encircled the Incus.
Reduces the surgical process time and crimping difficulties.
Pistons can be trimmed by using Osseous Cutter
Using smooth jaw alligator forceps, the piston loop can be expanded with a pick to slip over the Incus.
Design Benefits
Plastic memory provides secure closure.
Easily Trimmable with scissor or cutting tool from 6.00mm-3.50mm length.
Much Biocompatible with biological tissues.
Conventional design for easy attachment with Long
Process of Incus.
NiTiNOL is Nickel (Ni) and Titanium (Ti) both as alloy accidentally discovered by two researchers at the Naval Ordinance Laboratory (NOL) and thus the material named NiTiNOL. The properties of NiTiNOL provides easy bending and twisting of prosthesis.
Design Benefits
Alternative choice for NiTiNOL shape memory users who are concerned about heating the Incus.
Self crimping to long process of Incus
Surgeons who enjoy crimp free pistons finds solution with Super Elastic NITINOL Loop. The loop closes softly, uniformly around long process of incus which minimizes the risk of incus necrosis. Super elasticity property reduces the time of surgery.
Minimum force required to fit
It can be easily fit to long process of incus by applying a simple vertical force.
Super Elastic NITINOL-PTFE Piston can be easily cut because of PTFE shaft.
Both Pistons can be trimmed by using Osseous Cutter.
NiTiNOL is Nickel (Ni) and Titanium (Ti) both as alloy accidentally discovered by two researchers at the Naval Ordinance Laboratory (NOL) and thus the material named NiTiNOL. The properties of NiTiNOL provides easy bending and twisting of prosthesis.
Design Benefits
Alternative choice for NiTiNOL shape memory users who are concerned about heating the Incus.
Self crimping to long process of Incus
Surgeons who enjoy crimp free pistons finds solution with Super Elastic NITINOL Loop. The loop closes softly, uniformly around long process of incus which minimizes the risk of incus necrosis. Superelasticity property reduces the time of surgery.
Minimum force required to fit
It can be easily fit to long process of incus by applying a simple vertical force.
Super Elastic NITINOL-PTFE Piston can be easily cut because of PTFE shaft.
Both Pistons can be trimmed by using Osseous Cutter.
Super Titanium is a kind of material which can be bent and twisted but it always returns to its original shape. Unique flat loop design of Super Titanium material provides self crimping (elastic properties) attachment to Incus and also provides uniform attachment of loop around total periphery of Incus which reduces the risk of compressive necrosis. A superelastic property of loop reduces the surgical process time and crimping difficulties.
Design Benefits
More elastic titanium material for self crimping effect.
Elastic self crimping loop shortens the time of surgery.
Stable design provides maximum sound output.
Reduced risk of osteo-necrosis.
Super Titanium Piston is MRI Compatible.
Super Tita-PTFE Piston can be easily cut due to PTFE shaft.
Simplified loop introduction to Incus by easy downward movement.
Both Pistons can be trimmed by using Osseous Cutter.
Super Titanium is a kind of material which can be bent and twisted but it always returns to its original shape. Unique flat loop design of Super Titanium material provides self crimping (elastic properties) attachment to Incus and also provides uniform attachment of loop around total periphery of Incus which reduces the risk of compressive necrosis. A superelastic property of loop reduces the surgical process time and crimping difficulties.
Design Benefits
More elastic titanium material for self-crimping effect.
Elastic self-crimping loop shortens the time of surgery.
Stable design provides maximum sound output.
Reduced risk of osteo-necrosis.
Super Titanium Piston is MRI Compatible.
Super Tita-PTFE Piston can be easily cut due to PTFE shaft.
Simplified loop introduction to Incus by easy downward movement.
Both Pistons can be trimmed by using Osseous Cutter.
Both Pistons consists of a flat band loop and shaft, used for Stapedioplasty surgery. These prosthesis are connected between â??Long Processâ?? of Incus and the Footplate. In Malleus Stapedioplasty, the piston requires to be bent at the neck and this titanium loop easily facilitates this requirement which is not possible in the commonly used Teflon piston.
Design Benefits
Only one Piston is required for a Stapedioplasty surgery as the length can be cut as per requirement.
Malleable enough to facilitate bending at the neck for Malleus Stapedioplasty.
Stable design provides maximum sound output.
Offers best possible length selection.
Easy loop introduction.
Low risk of osteo-necrosis.
Tita-PTFE Piston can be easily cut due to PTFE shaft.
Tita Piston is MRI Compatible.
Both Pistons can be trimmed by using Osseous Cutter.
11623 Surgical Equipments Disposables Suppliers
Short on time? Let Surgical Equipments Disposables sellers contact you.
