Export grade Muriate of Potash (MOP) with minimum 60% potassium oxide (K2O) content.
Moisture 0.5% maximum.
Available in standard (coarse) and granular forms. Pink, red, or white crystalline granules, depending on origin.
Essential potassium source for crop nutrition, widely used in direct application and NPK blending.
Compatible with urea and DAP for custom blend formulations. Available in 50 kilogram polypropylene bags, 1,000 kilogram jumbo bags, or bulk vessel.
Supply volumes from 2,000 to 50,000 metric tons per shipment. All shipments inspected by SGS, Bureau Veritas, or Intertek at load port.
Payment via Irrevocable Letter of Credit at sight. HS Code 3104.20.
Blended hydraulic cements are produced by intergrinding or blending Portland cement and supplementary cementitious materials or SCM such as ground granulated blast furnace slag, fly ash, silica fume, calcined clay, hydrated lime, and other pozzolans. The use of blended cements in ready-mix concrete reduces mixing water and bleeding, improves workability and finishing, inhibits sulfate attack and the alkali-aggregate reaction, and reduces the heat of hydration.
Export grade Diammonium Phosphate (DAP) fertilizer rated 18-46-0.
Nitrogen content 18% minimum.
Phosphorus pentoxide (P2O5) content 46% minimum.
Moisture 1.5% maximum.
Granule size 2 to 4 millimeters with 90% minimum consistency. Grey or brown granular form, free flowing and non-clotted.
DAP is the most widely used phosphate fertilizer globally, suitable for direct application, blending with urea and potash for custom NPK formulations, and starter fertilizer programs.
Available in 50 kilogram polypropylene bags, 1,000-kilogram jumbo bags, or bulk vessel.
Supply volumes from 2,000 to 50,000 metric tons per shipment. All shipments are inspected by SGS, Bureau Veritas, or Intertek at load port.
Payment via Irrevocable Letter of Credit at sight. HS Code 3105.30.
Export grade Native Cassava Starch. Purity 85% minimum. Moisture 13% maximum. pH value 5.0 to 7.0. Whiteness 90% minimum. Fine white powder, odorless and tasteless. Used in food processing (noodles, snacks, thickening agents), paper manufacturing, textile sizing, pharmaceutical tablet binding, and adhesive production. Sourced from verified processors in Thailand and Vietnam. Available in 25 or 50 kilogram polypropylene bags with polyethylene inner lining or 1,000 kilogram jumbo bags. Supply volumes from 500 to 30,000 metric tons per shipment. All shipments inspected by SGS, Bureau Veritas, or Intertek at load port. Payment via Irrevocable Letter of Credit at sight. HS Code 1108.14.
Export grade dried Cassava Chips. Starch content 65% to 70%. Moisture 14% maximum. Sand and silica 3% maximum. Fiber 4% maximum. White to light brown irregular chips. Widely used as animal feed ingredient, ethanol production feedstock, and starch extraction raw material. High demand in China, South Korea, and European markets. Sourced from verified processors in Southeast Asia and West Africa. Available in 50 kilogram polypropylene bags, 1,000 kilogram jumbo bags, or bulk vessel. Supply volumes from 1,000 to 50,000 metric tons per shipment. All shipments inspected by SGS, Bureau Veritas, or Intertek at load port. Payment via Irrevocable Letter of Credit at sight. HS Code 0714.10.
14 Sulfate Of Potash Suppliers
Short on time? Let Sulfate Of Potash sellers contact you.
Export grade Extra Neutral Alcohol (ENA) with purity of 96.4% minimum. Highly rectified, neutral tasting ethanol used as the base spirit for vodka, gin, liqueurs, and other alcoholic beverages. Also used in food flavoring, pharmaceutical preparations, and perfumery. Methanol content 10 ppm maximum. Aldehydes (as acetaldehyde) 2 ppm maximum. Fusel oil 5 ppm maximum. Clear, colorless, and odorless liquid. Available in ISO tanks, flexitanks, or drums. Supply volumes from 500 to 20,000 metric tons per shipment. All shipments inspected by SGS, Bureau Veritas, or Intertek at load port. Payment via Irrevocable Letter of Credit at sight. HS Code 2207.10.
Export grade Industrial Ethanol with purity ranging from 95% to 96%. Used as a solvent in pharmaceutical manufacturing, chemical processing, cleaning products, personal care formulations, and industrial applications.
Water content 4% to 5%. Acidity (as acetic acid) 30 ppm maximum. Clear, colorless liquid.
Sourced from verified producers. Available in ISO tanks, flexitanks, drums, or bulk vessel.
Supply volumes from 500 to 30,000 metric tons per shipment. All shipments inspected by SGS, Bureau Veritas, or Intertek at load port. HS Code 2207.20.
Export grade Fuel Grade Ethanol with purity ranging from 99% to 99.9% (anhydrous). Used as a biofuel blending component for gasoline (E10, E15, E85 programs), octane enhancer, and renewable fuel standard compliance. Water content 0.1% maximum. Acidity (as acetic acid) 30 ppm maximum. Clear, colorless liquid. Sourced from verified producers. Available in ISO tanks, flexitanks, or bulk vessel. Supply volumes from 1,000 to 50,000 metric tons per shipment. Monthly supply programs and long term offtake agreements available. All shipments inspected by SGS, Bureau Veritas, or Intertek at load port. Payment via Irrevocable Letter of Credit at sight. HS Code 2207.10.
Export grade RBD (Refined, Bleached, Deodorized)
Palm Stearin. Free Fatty Acid (FFA) 0.15% maximum.
Melting point 55 to 60 degrees Celsius. Iodine value 32 to 36. White to pale yellow solid at ambient temperature.
Used in margarine and shortening production, soap and candle manufacturing, oleochemical production, and animal feed formulation.
Available in flexitanks, ISO tanks, drums, or bulk vessel. Supply volumes from 500 to 50,000 metric tons per shipment.
All shipments are inspected by SGS, Bureau Veritas, or Intertek at load port.
Payment via Irrevocable Letter of Credit at sight. HS Code 1511.90.
Export grade RBD (Refined, Bleached, Deodorized) Palm Olein. Free Fatty Acid (FFA) 0.1% maximum.
Moisture and impurities 0.1% maximum.
Cloud Point 8 degrees Celsius maximum. Iodine value 56 minimum.
Clear golden yellow liquid at ambient temperature. Widely used as cooking oil, frying oil, and in food manufacturing applications. Available in flexitanks, ISO tanks, or bulk vessel.
Supply volumes from 500 to 50,000 metric tons per shipment. Monthly supply programs and long term offtake agreements available.
All shipments inspected by SGS, Bureau Veritas, or Intertek at load port. Payment via Irrevocable Letter of Credit at sight. HS Code 1511.90.
Export grade Crude Palm Oil (CPO) sourced from verified mills in Southeast Asia. Free Fatty Acid (FFA) 5% maximum.
Moisture and impurities 0.25% maximum. DOBI value 2.3 minimum. Iodine value 50 to 55.
Red to orange in color. Used in food manufacturing, cooking oil production, soap and oleochemical production, and biodiesel feedstock.
Available in flexitanks, ISO tanks, or bulk vessel.
Supply volumes from 500 to 50,000 metric tons per shipment. Monthly supply programs and long term offtake agreements available.
All shipments inspected by SGS, Bureau Veritas, or Intertek at load port. Payment via Irrevocable Letter of Credit at sight. HS Code 1511.10.
Export grade Urea N46% in prilled form.
Nitrogen content 46% minimum.
Moisture 0.5% maximum.
Biuret 1.0% maximum.
Prill size 1 to 2.4 millimeters with 90% minimum consistency. White, free-flowing, non-clotted, and certified non-radioactive. Commonly used in markets across Asia, Africa, and Latin America for broad agricultural application.
Available in 50 kilogram polypropylene bags with polyethylene inner lining, 1,000 kilogram jumbo bags (FIBC), or bulk vessel. Supply volumes from 2,000 to 50,000 metric tons per shipment. Monthly supply programs and long term offtake agreements available.
All shipments inspected by SGS, Bureau Veritas, or Intertek at load port.
Payment via Irrevocable Letter of Credit at sight.
Chemical formula CO(NH2)2. HS Code 3102.10.
Export grade Urea N46% in granular form. Nitrogen content 46% minimum. Moisture 0.5% maximum. Biuret 1.0% maximum. Formaldehyde 0.55% maximum. Granule size 2 to 4 millimeters with 90% minimum consistency. White, free flowing, non-clotted, and certified non-radioactive. Suitable for direct soil application, mechanical spreading, and NPK blending operations. Available in 50 kilogram polypropylene bags with polyethylene inner lining, 1,000 kilogram jumbo bags (FIBC), or bulk vessel. Supply volumes from 2,000 to 50,000 metric tons per shipment. Monthly supply programs and long term offtake agreements available. All shipments inspected by SGS, Bureau Veritas, or Intertek at load port. Payment via Irrevocable Letter of Credit at sight. Chemical formula CO(NH2)2. HS Code 3102.10.
