Find Verified Steel Casting Suppliers, Manufacturers and Wholesalers

To Perfectly Insulate The Joints Of Your Cables, Head To Head Or Branch Of Junctions

Casting resins are suitable for:
Mechanical fixing of components
Electrical insulation
Protection against corrosion
Reduction of sensity against mechanical stress like vibration, impact, push, bending and tensile
forces
Better heat transfer
Protection of components against tampering, guarantee control
We can offer the appropriate product for your demand
Temperature stable from 40 to 550 C
Each viscosity you require soft to hard
Transparent or coloured

Handling by hand or by filling machine for cast resin systems
Potlife: very short (10 sec) to 3 hours
Hot or coldcuring
1 or 2component systems
1 kg to 30 tons per batch

ISO RC cast resin cable joint and branch off boxes made to reliably connect and branch off low voltage
power cables:
Proved suitability and quality since more than 30 years
Optimized regarding occupational and environmental safety, contains 60% raw materials from
renewable native sources
Simple handling, few parts, precut gaskets
Extensive advising and service
ISO RC cast resincable joint boxes for applications up to 0,6 / 1 kV
Quality controlled according to DIN/ISO/EN 9001/29001

Application
The belly type cable boxes are designed to branch off and connect small to large consumers. Using PVC or
VPE insulated cables and screw compact tap connectors.
Design
Divided, halogen free, hinged housing, especially designed to provide enough space for the tap connector. Parallel placed branch off cable, pre glued seals and pre cut gaskets which can be easily adjusted to cable size. Electrical and mechanical protection is achieved by RLSWtype cast resin ISO PUR K 2000 or fast curing ISOFILL A2.

Mounting
Branch off and main cable are connected with compact tap connectors or single connectors. The com
plete mounted cable box is sealed via the large opening at the top of the cable box and afterwards
closed with a sliding cap.
The cable ditch may be closed quickly since the sealing compounds are fast curing systems.
Delivery
Housing, gaskets, sliding cap, mounting kit, cast resin, mounting instruction.
The cast resin can be delivered in 2chamber bags or tins.
Accessories
Screw compact tap connectors, single connectors
compression connectors.

211 as per ISRI codes.

Tight Head or Open Head Steel Drums Available and can be customised to meet your requirements.

* Tight Head drums have a triple seam construction (7 layers of steel) with a vertical seam electrically welded.
* Superior vacuum resistance.
* Open Head drums have completely removable lids and a triple seam safety factor with several locking band alternatives.
* Many large steel drums can be reconditioned and reused several times before being recycled.
* Fully customisable size 55+ gallons (208+ nominal litres), lined, various closures and fittings available.
* Various colour and product decoration options are also available.

Galvanized steel coils are steel coils that have been coated with a layer of zinc to protect the steel from corrosion This process is known as galvanization These coils are widely used in various industries including construction automotive and manufacturing due to their durability resistance to rust and versatility The zinc coating provides a protective barrier that helps prevent corrosion and increases the lifespan of the steel

HS Code
The Harmonized System HS code for galvanized steel coils typically falls under the following classification

HS Code 7210 Flatrolled products of iron or nonalloy steel galvanized or plated with zinc
Subcategories
721011 Hotrolled galvanized steel
721012 Coldrolled galvanized steel
721030 Other galvanized steel products
Specifications
Material Hotrolled or coldrolled steel
Coating Type Zinc coating galvanized
Coil Weight Typically ranges from 1000 kg to 10000 kg
Coil Width 600 mm to 1500 mm depending on customer requirements
Thickness 02 mm to 30 mm
Zinc Coating Weight Measured in gm typically ranging from 60 gm to 275 gm higher zinc coating for more corrosion resistance
Surface Finish Bright spangled or nonspangled depending on the galvanization process
Edge Type Mill edge slit edge or trimmed edge
Product Standard
The quality and performance of galvanized steel coils are governed by international and national standards Common standards include

ASTM A653A653M Standard specification for steel sheet zinccoated galvanized by the hotdip process
JIS G3302 Japanese Industrial Standard for hotdip galvanized steel sheets
EN 10346 European standard for continuously hotdip coated steel flat products
ISO 3575 International standard for continuously hotdip galvanized steel sheets

We can tailor drum sizes to meet your specific requirements and use case.

* From 12 litre (3 gallon) up to 160 litres (42 gallon) capacity.
* Tight Head, Open Head, Composite options available.
* Thicknesses according to specification.
* UN Solid and Liquid ratings available.
* Plain or internally lacquered with epoxy, phenolic etc.
* Stainless Steel Options also available.

Aluminium Ingot A7 is a high-purity primary aluminium product with a minimum aluminium content of 99.70%, widely used in the automotive, construction, electrical, packaging, aerospace, and manufacturing industries. Manufactured according to international quality standards, the ingots offer excellent corrosion resistance, high conductivity, superior castability, and outstanding mechanical properties. The product is suitable for remelting, alloy production, extrusion, rolling mills, and various industrial applications.

ERW tubes, or Electric Resistance Welded tubes, are a type of steel tubing produced through a high-frequency welding process. These tubes are widely used in various industries due to their strength, durability, and cost-effectiveness. The manufacturing process involves passing a steel strip through a series of rollers, where it is formed into a cylindrical shape, and then welded longitudinally using electric resistance. This welding process ensures that the tube has a strong, uniform seam, making it suitable for a wide range of applications.

Key Features:

Material Composition: ERW tubes are typically made from mild steel, stainless steel, or galvanized steel, offering various grades to meet different strength and corrosion resistance requirements.
Manufacturing Process: The process of electric resistance welding uses heat generated by electrical resistance to bond the edges of the steel strip, creating a continuous tube. This process results in a smooth, clean weld seam that is often stronger than the base material itself.
Variety of Sizes: ERW tubes are available in a wide range of diameters and wall thicknesses. They can be customized to meet the specific requirements of industries like automotive, construction, and oil & gas.
Surface Finish: ERW tubes come with various surface finishes, such as mill finish, galvanized, or powder-coated, providing options for aesthetic appeal and enhanced corrosion resistance.
Strength and Durability: The ERW process ensures uniformity in strength and structural integrity, making the tubes ideal for high-pressure applications. The welded seam is highly resistant to cracking and fatigue.
Cost-Effectiveness: Compared to other types of welded or seamless tubes, ERW tubes are more affordable due to the efficient manufacturing process.
Applications:

Automotive Industry: Used in exhaust systems, chassis, and structural components.
Construction: Employed in structural frameworks, scaffolding, and fencing.
Oil & Gas: Ideal for pipelines, drill pipes, and other high-pressure applications.
Furniture Manufacturing: Used in the production of furniture frames and other industrial products.
Mechanical Engineering: Applied in various mechanical and hydraulic systems.
Benefits:

Precision and Consistency: The ERW process ensures that each tube is uniform in size and quality, minimizing defects.
Flexibility: Customization options for length, diameter, and wall thickness to suit specific needs.
Environmental Benefits: ERW tubes are recyclable, contributing to sustainability efforts in manufacturing.
Conclusion:

ERW tubes are a versatile and reliable choice for a variety of applications across different industries. Their high strength, cost-effectiveness, and customization options make them an excellent solution for projects requiring durable and high-quality steel tubing.

Reinforcement bars, or rebar, are crucial in the construction industry, providing strength and durability to concrete structures. Concrete is strong in compression but weak in tension, and rebar enhances its tensile strength. This ensures the longevity and stability of buildings, bridges, roads, and other infrastructure.

Key Features:

High Strength and Durability: Made from high-quality steel, rebar is designed to withstand heavy stresses and loads, preventing cracks and structural failure over time.
Corrosion Resistance: Some rebar is coated with anti-corrosion materials, protecting it from rust, moisture, and harsh environments, thus prolonging the concrete structureâ??s lifespan.
Variety of Sizes and Grades: Available in various diameters, lengths, and grades, rebar provides flexibility for diverse construction projects. Common grades include Grade 40, Grade 60, and higher, suitable for both residential and industrial applications.
Bendable and Malleable: Rebar can be bent and shaped to meet specific design requirements without compromising strength, making it ideal for complex architectural designs.
Easy to Install: Standardized lengths and diameters make rebar easy to transport, handle, and install. It can be welded, tied, or mechanically spliced for construction needs.
Cost-Effective: Rebar is a long-term solution for reinforcing concrete, ensuring structural integrity while minimizing the need for frequent repairs or replacements.
Applications:

Residential and Commercial Buildings: Used in foundations, columns, beams, and slabs to provide support and prevent cracking.
Bridges and Overpasses: Rebar ensures the safety and stability of high-stress structures.
Roadways and Pavements: Strengthens roads, sidewalks, and other paved surfaces, allowing them to withstand heavy traffic loads.
Industrial Structures: Reinforces heavy-duty industrial buildings, including factories, warehouses, and power plants.
Specifications:

Material: High-quality steel (carbon or alloy steel)
Length: Available in standard lengths or custom-cut for specific projects
Diameter: Ranges from 6 mm to 40 mm
Grade: Available in various grades, including Grade 40, Grade 60, and higher
Finish: Can be plain or deformed (with ridges for better bonding with concrete)
Why Choose Our Reinforcement Bars?

Our rebar is manufactured to meet international quality standards, ensuring superior strength, reliability, and performance. Whether for residential homes or large commercial projects, our reinforcement bars provide the structural support needed for safe, durable concrete work.

Realization of sections for high pressure circuits, from DN 100 to DN 500 schedule 40 or customized.

Possible customization of the project, welded in the workshop in Italy by certified welders and shipped by air or ship all over the world.

we make your sections or part of the system following your drawings, flowchart or instructions, measurements and materials of equipment, manual or electric valves on request.

E-AYY
PVC Insulated Cable with Aluminium Conductor

This power cable is suitable for fixed installations, preferably in cable ducts, indoors, outdoors, in water or underground if no mechanical damage is to be expected.

Due to aggressive chemicals contained in waste waters, sewer pipes must meet the highest quality standards. Pipes and fittings must stay permanently waterproof and corrosion free in order to avoid dangerous contamination of underground waters, and irreparable environment damages.

If the photographs of pipelines are analyzed, it can be determined that most damages, especially on non-elastic pipes, occur due to the surroundings changes.

Heavy fixed cutter for professional use available in 4 different models ideal for cleaning uncultivated soil and end of season cutting.

MODEL WORKING WIDTH WEIGHT SUGGEST POWER OVERALL WIDTH HEIGHT DEPTH' NUMBER OF CUTTERS
ARTP1400 135 CM 460 KG 18 CV o 13 KW 140 CM 77 CM 110 CM 48 Unita
ARTP1600 155 CM 510 KG 35 CV o 22/28 KW 160 CM 77 CM 110 CM 60Unita
ARTP2000 195 CM 610 KG 50 CV o 40 KW 200 CM 77 CM 110 CM 65Unita
ARTP2500 245 CM 700 KG 80 CV o 60 KW 250 CM 77 CM 110 CM 78 Unita
Standard equipment, EEC accident prevention guards, 1.4 kg hammers, knives as an alternative to hammers, depth sleds, 3-point universal attachment Cat. 1 - from 200 upwards Cat. 2, single-speed reducer box 540g / 1 'alternatively 1000g / 1 'Cardan joint CL4, double hood, collection teeth, rear roller.

The ARTP series shredders are semi-mounted type machines, applicable front or rear to the three points of the hydraulic lift of small tractors. The rear part rests on a leveling roller, which adjusts its working height. The rotor is equipped with heavy hammers or alternatively knives in both solutions. The accessories are interchangeable and are suitable for various work needs.

Mulcher suitable for professional use, easy to handle and suitable for the maintenance of uncultivated land, parks, lawns and gardens with large shrubs and for end of season cleaning.

Light fixed machine available in 3 different models ideal for cleaning grounds and end of season cutting.

MODEL WORKING WIDTH WEIGHT SUGGEST POWER OVERALL WIDTH HEIGHT DEPTH' NUMBER OF CUTTERS
ARTL1000 92 CM 260 KG 18 CV o 13 KW 100 CM 77 CM 110 CM 36 Unit
ARTL1400 135 CM 330 KG 35 CV o 22/28 KW 140 CM 77 CM 110 CM 54 Unit
ARTL1800 176 CM 475 KG 50 CV o 40 KW 200 CM 77 CM 110 CM 60 Unit
Standard equipment with EEC accident prevention guards, 1 kg hammers, knives as an alternative to hammers, depth slides, 3-point universal attachment Cat. 1, 540G / 1 'single-speed reducer box, double hood, pick-up teeth, roller rear.

The ARTL series shredders are semi-mounted type machines, applicable front or rear to the three points of the hydraulic lift of small tractors. The rear part rests on a leveling roller, which adjusts its working height. The rotor is equipped with light hammers or alternatively knives in both solutions. The accessories are interchangeable and are suitable for various work needs.

These machines are light (but with adequate strength), easy to handle and suitable for the maintenance of parks, lawns and gardens, suitable for private individuals for small farms, dedicated to cleaning uncultivated lawns or for end of season cleaning.

Professional fixed milling machine available in 3 different models ideal for small agricultural and cultivators.

MODEL WORKING WIDTH WEIGHT SUGGEST POWER OVERALL WIDTH HEIGHT DEPTH' NUMBER OF CUTTERS
ARF1300 130 CM 405 KG 35 CV o 26 KW 147 CM 80 CM 120 CM 30 Unit
ARF1850 185 CM 505 KG 50 CV o 37 KW 200 CM 80 CM 120 CM 42 Unit
ARF2400 233 CM 580 KG 65 CV o 48 KW 250 CM 80 CM 120 CM 52 Unit
The standard equipment includes a chain transmission, 4-bent curved hoe, automatic chain tensioner for depth slides, 3-point universal attachment Cat. 1, 540G / 1 'single-speed gearbox, clutch coupling

Fixed version-milling machines that can be easily used with small and medium-sized tractors. Suitable for working on medium consistency soils and for preparing seed beds for cultivation and horticulture. The machine is ideal for operators working on small and medium-sized soils.

The milling machines of the AGRIROCK line help to preserve the microorganisms useful for the biological balance of the soil and reduce the time required for preparation for sowing.

Given the reduced size of the cutters, the best adaptation to the processing of sloping land and irregularly shaped plots is significant.

Effective mixing of the soil with homogeneous distribution of the fertilizers throughout the worked profile with the possibility of working moist soils in depth but dry on the surface.

Shredding of crop residues in sizes more suitable for natural decomposition and humidification.

E-AYY
PVC Insulated Cable with Aluminium Conductor

This power cable is suitable for fixed installations, preferably in cable ducts, indoors, outdoors, in water or underground if no mechanical damage is to be expected.

(N)2XY COPPER CABLES
Single / multi-core PVC 0.6 / 1Kv insulated power cables

xxx

xxx

H07V-R (Ym)
PVC Insulated Single Core Wire
Yellow-green grounding cable.

CABLE PROTECTION PIPES PE
PIPES FOR OPTICAL FIBER CABLE PROTECTION

To spend your evenings without mosquitoes.

Data sheet mosquito killer light

3 light modes: 20%, 50% and 100%
Up to 20 h of continuous operation
Mosquito killer grid
Waterproof IPX6
Practical hanger
ART. 401
Power : 1 W
Luminous flux : 180 lm
grade : IPX6
Battery : Polymer 3.7 V 2000 mAh

Mosquito killer, lamp attracts rechargeable mosquitoes with solar energy, just display the lamp during the day to recharge the batteries and spend an evening away from mosquitoes and insects.

SOLAR MULTIFUNCTION LED LAMP

2 brightness settings
Up to 12 h of continuous operation
Power bank 2200 mAh as additional power supply for electronic devices
charging modes : solar panel or USB charger
Practical pull out handle
Metal hook for hanging
Power : 2 W
Luminous flux : 160 lm
IP grade : IP54
Battery : Liion 2200 mAh
Led solar light, it is ideal for camping, outdoor, remote villages or in case of black out.
With solar led, you can also charge your mobile phone and smartphone.
It is enough to expose the photovoltaic panel to the sun for a few hours every day, to guarantee
the activities planned at home or for recharging batteryâ??powered devices supplied by USB
socket.