Apply to
Marine : Fishing boat, Leisure boat, Cruise, Ferry
Industrial : Water Pump, Sand Pump
Standard supply
Mechanical control valve
Cable bracket/clamp parts.
Oil cooler/cover
Companion flange/Reamer bolts
Bell housing (Selection)
CENTA flexible coupling
Features
Marine reduction gearbox with hydraulic clutch.
Suitable for twin engines with the same reduction ratio as forward/reverse.
Design and strict quality management according to ISO9001 standards.
Use of seawater-resistant castings.
Quiet operation with precise gearing.
Tapered roller bearing application considering maximum thrust.
Compact design, minimal appearance in its class.
Permanently available oil filter (metal) applied.
GO HOME (emergency bolt application) function.
Options
Electric control valve(12V, 24V optional)
Mechanical trolling valve
Mounting brackets (Flat type, Customized)
Class
Apply to
Marine : Fishing boat, Leisure boat, Cruise
Standard supply
Mechanical control valve
Cable bracket/clamp parts.
Oil cooler/cover
Companion flange/Reamer bolts
Bell housing(Selection)
Dual stage coupling(Selection)
Features
Marine reduction gearbox with hydraulic clutch.
Suitable for twin engines with the same reduction ratio as forward/reverse.
Design and strict quality management according to ISO9001 standards.
Use of seawater resistant castings.
Quiet operation with precise gearing.
Tapered roller bearing application considering maximum thrust.
Compact design, minimal appearance in its class.
Permanently available oil filter (metal) applied.
GO HOME (emergency bolt application) function.
Options
Electric control valve(12V, 24V optional)
Mechanical trolling valve
Mounting brackets(Flat type, Customized)
Class
Apply to
Marine : Fishing boat, Leisure boat, Water taxi, Speed boat
Standard supply
Mechanical control valve
Cable bracket/clamp parts.
Oil cooler/cover
Companion flange/Reamer bolts
Bell housing(Selection)
Dual stage coupling(Selection)
Features
Lightweight and robust aluminum alloy casing (sea water resistant)
Integral V-drive, aluminum housing
14�° down angle on output shaft
Marine reduction gearbox with hydraulic clutch.
Suitable for twin engines with the same reduction ratio as forward/reverse.
Design and strict quality management according to ISO9001 standards.
Quiet operation with precise gearing.
Tapered roller bearing application considering maximum thrust.
Compact design, minimal appearance in its class.
Permanently available oil filter(metal) applied.
GO HOME(emergency bolt application) function.
Options
Electric control valve(12V, 24V optional)
Mechanical trolling valve
Mounting brackets(Flat Type, Customized)
Key feature
Convenient installation. No need to install an extra tunnel.
High rotate power offered by positioning at the end of the Stern
External type offers repairable
Direct motor type gives high durability and less noise.
Application
Vessels that require high thrust in a stern
Suitable for self-propelled barges or transport
Standard supply
Thruster, including the mounting part
Power pack (excludes hoses and hydraulic devices for tilt)
Apply to
Marine : Fishing boat, Leisure boat, Cruise
Industrial : Water Pump, Sand Pump
Standard supply
Mechanical control valve
Cable bracket/clamp parts.
Oil cooler/cover
Companion flange/reamer bolts
Bell housing (Selection)
Rubber block coupling (Selection)
Features
Marine reduction gearbox with hydraulic clutch.
Suitable for twin engines with the same reduction ratio as forward/reverse.
Design and strict quality management according to ISO9001 standards.
Use of seawater-resistant castings.
Quiet operation with precise gearing.
Tapered roller bearing application considering maximum thrust.
Compact design, minimal appearance in its class.
Permanently available oil filter (metal) applied.
GO HOME (emergency bolt application) function.
Options
Electric control valve (12V, 24V optional)
Mechanical trolling valve
Mounting brackets (flat type, customised)
Class
5383 Industrial And Automotive Suppliers
Short on time? Let Industrial And Automotive sellers contact you.
Apply to
Marine : Fishing boat, Leisure boat, Cruise
Industrial : Water Pump, Sand Pump
Standard supply
Mechanical control valve
Cable bracket/clamp parts.
Oil cooler/cover
Companion flange/Reamer bolts
Bell housing (Selection)
Rubber block coupling (Selection)
Features
Marine reduction gearbox with hydraulic clutch.
Suitable for twin engines with the same reduction ratio as forward/reverse.
Design and strict quality management according to ISO9001 standards.
Use of seawater-resistant castings.
Quiet operation with precise gearing.
Tapered roller bearing application considering maximum thrust.
Compact design, minimal appearance in its class.
Permanently available oil filter (metal) applied.
GO HOME (emergency bolt application) function.
Options
Electric control valve (12V, 24V optional)
Mechanical trolling valve
Mounting brackets (flat type, customised)
Power steering system consists of a cylinder, a pump and handle. The oil is pressured from hydraulic pump and a
handle(orbitrol) control a cylinder.
The cylinder helps rudder move and the required oil is supplied from the hydraulic pump.
Cylinder is classified Single, Rotary, Twin, Two rudders by torque and appearance
Pump is classified Pulley type drived by engine and Power unit drived by electric motor
We offer 7 kinds of handles with various appearance and functions.
Features
Narrow handle diameter helps you operate with small energy and power steering system offers light operation
On where you put the handle, the rudder is fixed
Structure that the rudder does not rotate even when the tide power the rudder
When engine stops, manual steering is capable (Handle becomes heavy)
You can choose the combination fit to your vessel
Application
Vessel above 350 HP
A wide range of vessel from fishing boat to ferry
Electric steering system is equl with the power steering system equipped a solenoid valve.
It is the system which steers with solenoid valve by comparing resistance values of electric handle and rudder angle sensor
It consists of a cylinder and a pump, an solenoid valve and a electric handle.
The cylinder makes the rudder move and the pump supplies the oil to the cylinder. Handle is to swap the direction of hydraulic pressure
Cylinder is classified Single, Rotary, Twin, Two rudders by torque and appearance
Pump is classified Pulley type drived by engine and Power unit drived by electric motor
We offer 7 kinds of handles with various appearance and functions.
You can choose the combination fit to your vessel
Key features
Narrow handle diameter helps you operate with small energy and power steering system offers light operation
The number of rotation wheel is 2.8 like the hydraulic handle
Analogue type of a indicator for handle and a rudder angle indicator are applied.
Controlled by Joystick / Autopilot
USB port
Autopilot can be used together.
Application
Vessel above 350HP
A wide range of vessel from fishing boat to ferry
Attachable to both sides of the (pulley) and rear (bell housing) of the engine
Independent control by 2 clutches
Live pulley provided (7â?³, B type, 2 grooves)
Perfect brake system to prevent dragging
Zinc anodes on oil coolers prevent the corrosion.
Monitoring function to see rotation of pump shaft
Pressure gauge provided as standard
Easy removal of metal in oil with a magnet plug
Compatible pump pad for various pumps (If required, machining is needed)
Extendable 2 output ports, each with a gearbox installation (option)
Key features
Same rotation of output/input
Live pulley provided (9, C type, 3 grooves)
Versatility of Output Types
Attachable to both the front (pulley) and rear (bell housing) sides of the engine
Directly attachable with pump pad
Monitoring function to see the rotation provided when you choose pump as the output type
SAE C D pumps are available (if required, needs processing).
SAE C D adaptor provided
Pressure gauge provided as standard
Application
Propulsion device of stern drive
Clutch for powertrain
Drive for hydraulic devices or accessories
Diesel power unit system
Key features
Live PTO equipped
PTO Capacity: 100 hp/1800 rpm (DMT95H), 150 hp/1800 rpm (DMTP5100, DMT220DL, DMTP6500, DMT400H, DMT400HL)
Able to take off power from transmission
Suitable for free-standing design
Drive for steering system/hydraulic pump
Apply to
Fit to aluminium boat/free-standing design
Durable structure of driving gear bearing
Lubrication structure of gear and bearing
Thruster bearing for output shaft
High elasticity coupling provided
We are looking for substantial buyers who are end user or agent regarding
Copper Wire Scrap.
As this matter, we can supply this good as very high quality, competitive price
and short delivery by our best service. So please notice the following specification.
- Commodity : COPPER WIRE SCRAP:
- Origin : Kazakhstan, Bolivia, Mexico and others
- Purity : 99.99%
- Loading port : TBA
- Capacity : 5000MT PER MONTH
- Minimum Quantity: 100mt monthly
- Trial Quantity : 100mt to 1,000mt max
- Shipment : TBC - Max 30 days. weekly or monthly.
- Payment : By 100% at sight DLC at loading port. For monthly Order DLC is paid at
destination port
- Inspection : SGS / Equivalent at port of loading
If you have interests and any question for above specifications, please do not
hesitate to get in touch with us and to send LOI issued by end buyer in anytime.
Then we will provide full information such as FCO and draft SPA based on
attractive price right now. Thanks.
