Find Verified Automotive Testers Chargers Suppliers, Manufacturers and Wholesalers

1.GAP in the Finishing-Stone, Part sculpture does not pinch PUMP between GAP has been dismissed by the water and the water frozen OVER-FLOW HOLE in the top of the wall through the machines installed in the lower three-sedimentation-filtration tank is vented to precipitate was filtered again PUMP The water is put through by the GAP. GAP and GAP problems that occur in this way also significantly reduced wear.
2.GAP Finishing-Stone, or the angle it does not pinch the part was manufactured.
3.Despite improvements such as more, GAP If there is a wear and tear on, GAP and many times without changing the adjustment has been designed to be used.
4.Hydraulic CYLINDER used, the compressed air can be used alone without the electric.
5.Injection and exhaust products to happen on one direction, it is convenient to the worker.

Rolf mini Finishing machine with a Imitation security vulgar, dental parts, and is useful for finishing small parts such as confined space and noise in the ease of operation has the advantage that almost naji. The basic structure of one trillion finishing polyurethane-TUB, upper drum, disc, drum consists of the lower drum and disc problems between the media to improve the fitting of a small media can be used seamlessly.

Suitable for mass production is a continuous vibration Finishing machine. Feed products produced from the equipment through the committed and then automatically finishing, polishing, and then the automatic sorting, washing, drying (optional) can finish up with a Cycle.

Suitable for mass production is a continuous vibration Finishing machine. Feed products produced from the equipment through the committed and then automatically finishing, polishing, and then the automatic sorting, washing, drying (optional) can finish up with a Cycle

The overall operating principle is the same as the vibration Finishing machine and a large long to mention if the product is useful.

The blood of various steel and nonferrous metal tribute series caused burr removed after molding, chamfering, etc. Removal of scale that occurs after the heat treatment is ideal for plating or coating before finishing polishing, polishing is suitable for glossy

UA Type ZA or simple selection device built into the machine after completing a finishing damper selection promoted by a network of parts-off wheel and come up and finishing stone selection operation is done go back into the interior parts of the tank is vented to the outside.

The equipment inside the tank by a special vibrating motor causes vibrations in the 3D finishing ston as a product formed in the vertical and horizontal rotation of the finishing surface of the product is.

Product Features:
Removable Barrel Box
High-speed finishing
Scratch / hit trace no
JOG operation due to the location barrel box
Gem, useful for small parts for dental

This machine is Finishing machine the product as a high-speed centrifugal input, separating transport, washing, drying is capable of automatic line. Four of the six boxes, each barrel TURRET (tumblers), which is attached to the alternate startup TURRET allows you to reverse direction. Section barrel parts, Grinding Stone, water and fixed if TURRET objects in a box by the centrifugal force of the barrel inside the box, get to live a life of intense pressure of work.

This machine is a centrifugal force, using the high-speed Finishing machine.Four of the six boxes, each barrel TURRET (tumblers), which is attached to the alternate startup TURRET allows you to reverse direction. Section barrel parts, Grinding Stone, water and fixed if TURRET objects in a box by the centrifugal force of the barrel inside the box, get to live a life of intense pressure of work.

This machine is a centrifugal force, using the high-speed Finishing machine.Four of the six boxes, each barrel TURRET (tumblers), which is attached to the alternate startup TURRET allows you to reverse direction. Section barrel parts, Grinding Stone, water and fixed if TURRET objects in a box by the centrifugal force of the barrel inside the box, get to live a life of intense pressure of work. Mini Finishing machine, and the flavors of HZ4/12/30 barrel shape of the box type table"Vertical Type- 0Horizontal type" Mainly divided into small parts and are suitable for.

Product Features.
COMPACT with a design to minimize the installation area
Automatically achieve high quality production by spraying lapping powder.
Constant speed, quiet operation improves workability as.

Ultra-precision machining process, grinding refers to more than glossy finish and Romans in the plane of the Federated increasing grinding machine for machining is useful.

Features:
Water Seal, mechanical seal, ceramic, solar substrate, a semiconductor wafer, Mobile Phone tempered glass, TFT-LCD panels are used in many areas including:

Rollfiow finishing Machine connected to the finishing machine and separator-dryer is automation line.
Your desired specifications tailored to the size of the factory automation line of type is.

Features
Products & media can be selective, easy cleaning, labor costs, large Polishing and automatic drying

Inline System:
1.A system with excellent productivity as an inline type in which the deposition process is performed while the substrate moves.
2. Optimized for OLED lighting panel production

Batch Sputter:
A system suitable for research and development as various thin film deposition is possible

K500 (Same with SB45)
Operating Weight(Including Tool)
Top Type - 577 kg, 1269 lbs
Side Type - 510 kg, 1122 lbs
Box Type - 571 kg, 1256 lbs
Operating Height(Including Tool)
Top Type - 1946 mm, 76.6 inch
Side Type - 1767 mm, 69.5 inch
Box Type - 2101 mm, 82.7 inch
Operating Pressure - 130 ~ 160 bar
Required Oil Flow - 60 ~ 100 l/min
Hose Diameter - PF 3/4 inch
Tool Diameter - 85 mm, 3.34 inch
Applicable Excavator - 7.0 ~ 14 ton, 15428 ~ 30856 lbs

K600 (Same with SB50)
Operating Weight(Including Tool)
Top Type - 890 kg, 1958 lbs
Side Type - 765 kg, 1683 lbs
Box Type - 861 kg, 1894 lbs
Operating Height(Including Tool)
Top Type - 2338 mm, 92.0 inch
Side Type - 1939 mm, 76.3 inch
Box Type - 2326 mm, 91.5 inch
Operating Pressure - 150 ~ 170 bar
Required Oil Flow - 80 ~ 110 l/min
Hose Diameter - PF 3/4 inch
Tool Diameter - 100 mm, 3.93 inch
Applicable Excavator - 11 ~ 16 ton, 24244 ~ 35264 lbs

HB15G
Operating Weight(Including Tool)
Top Type - 1100 kg, 2420 lbs
Side Type - 1030 kg, 2266 lbs
Box Type - 1234 kg, 2715 lbs
Operating Height(Including Tool)
Top Type - 2470 mm, 97.2 inch
Side Type - 2035 mm, 80.1 inch
Box Type - 2550 mm, 100.3 inch
Operating Pressure - 150 ~ 170 bar
Required Oil Flow - 90 ~ 120 l/min
Hose Diameter - PF 1 inch
Tool Diameter - 120 mm, 4.72 inch
Applicable Excavator - 12~ 18 ton, 26448 ~ 39672 lbs

K700 (Same with SB60)
Operating Weight(Including Tool)
Top Type - 1431 kg, 3148 lbs
Side Type - 1255 kg, 2761 lbs
Box Type - 1297 kg, 2853 lbs
Operating Height(Including Tool)
Top Type - 2510 mm, 98.8 inch
Side Type - 2089 mm, 82.2 inch
Box Type - 2604 mm, 102.5 inch
Operating Pressure - 150 ~ 170 bar
Required Oil Flow - 90 ~ 120 l/min
Hose Diameter - PF 1 inch
Tool Diameter - 125 mm, 4.92 inch
Applicable Excavator - 15 ~ 18 ton, 33060 ~ 39672 lbs

K800 (Same with SB70)
Operating Weight(Including Tool)
Top Type - 1675 kg, 3685 lbs
Side Type - 1452 kg, 3194 lbs
Box Type - 1500 kg, 3300 lbs
Operating Height(Including Tool)
Top Type - 2620 mm, 103.1 inch
Side Type - 2289 mm, 90.1 inch
Box Type - 2691 mm, 105.9 inch
Operating Pressure - 160 ~ 180 bar
Required Oil Flow - 100 ~ 150 l/min
Hose Diameter - PF 1 inch
Tool Diameter - 135 mm, 5.31 inch
Applicable Excavator - 16 ~ 21 ton, 35264 ~ 46284 lbs

K100-1
Operating Weight(Including Tool)
Top Type - 73 kg, 161 lbs
Side Type - 70 kg, 154 lbs
Box Type - 102 kg, 224 lbs
Operating Height(Including Tool)
Top Type - 1262 mm, 49.7 inch
Side Type - 972 mm, 38.2 inch
Box Type - 1135 mm, 44.7 inch
Operating Pressure - 90 ~ 120 bar
Required Oil Flow - 15 ~ 30 l/min
Hose Diameter - PF 1/2 inch
Tool Diameter - 40 mm, 1.6 inch
Applicable Excavator - 0.8 ~ 2.5 ton, 1763 ~ 5510 lbs

K100
Operating Weight(Including Tool)
Top Type - 100 kg, 220 lbs
Side Type - 90 kg, 198 lbs
Box Type - 126 kg, 277 lbs
Operating Height(Including Tool)
Top Type - 1350 mm, 53.1 inch
Side Type - 1000 mm, 39.3 inch
Box Type - 1262 mm, 49.7 inch
Operating Pressure - 90 ~ 120 bar
Required Oil Flow - 20 ~ 40 l/min
Hose Diameter - PF 1/2 inch
Tool Diameter - 45 mm, 1.77 inch
Applicable Excavator - 1.2 ~ 3.0 ton, 2645 ~ 6612 lbs

K200 (Same with SB30)
Operating Weight(Including Tool)
Top Type - 120 kg , 264 lbs
Side Type - 120 kg , 264 lbs
Box Type - 152 kg , 334 lbs
Operating Height(Including Tool)
Top Type - 1420 mm, 55.9 inch
Side Type - 1140 mm, 44.9 inch
Box Type - 1342 mm, 52.8 inch
Operating Pressure - 90 ~ 120 bar
Required Oil Flow - 25 ~ 50 l/min
Hose Diameter - PF 1/2 inch
Tool Diameter - 53 mm, 2.08 inch
Applicable Excavator - 2.5 ~ 4.5 ton, 5510 ~ 9918 lbs

K300 (Same with SB40)
Operating Weight(Including Tool)
Top Type - 298 kg, 656 lbs
Side Type - 250 kg, 550 lbs
Box Type - 265 kg, 649 lbs
Operating Height(Including Tool)
Top Type - 1586 mm, 62.4 inch
Side Type - 1330 mm, 52.3 inch
Box Type - 1600 mm, 63.0 inch
Operating Pressure - 110 ~ 140 bar
Required Oil Flow - 40 ~ 70 l/min
Hose Diameter - PF 1/2 inch
Tool Diameter - 68 mm, 2.67 inch
Applicable Excavator - 4.0 ~ 7.0 ton, 8816 ~ 15428 lbs

K400 (Same with SB43)
Operating Weight(Including Tool)
Top Type - 375 kg, 825 lbs
Side Type - 380 kg, 836 lbs
Box Type - 375 kg, 825 lbs
Operating Height(Including Tool)
Top Type - 1729 mm, 68.0 inch
Side Type - 1538 mm, 60.5 inch
Box Type - 1859 mm, 73.1 inch
Operating Pressure - 120 ~ 150 bar
Required Oil Flow - 50 ~ 90 l/min
Hose Diameter - PF 3/4 inch
Tool Diameter - 75 mm, 2.95 inch
Applicable Excavator - 6.0 ~ 9.0 ton, 13224 ~ 19836 lbs

Sous-Vide Nu Classic vacuum cooking : representative Recipes of the Wellness Cook (Wellbeing Cook).  1799 - Britain's Earl Benjamin Thompson originated. In 1960, Georges Pralus made a process. Bruno Goussault made Vaccum vinyl Low-Temperature Cook, the state-of-the-art, called ‘Sous Vide’