Find Verified Solar Cells Suppliers, Manufacturers and Wholesalers

We are a manufacturer specializing in high-performance solar cell pastes and conductive materials. We specialize in metallization materials for TOPCon and PERC solar cell manufacturing and work with manufacturers to improve cell efficiency, reduce bow, and optimize paste consumption.

A Trusted Technology Partner for High-Performance Solar Cell Metallization

Why Leading Manufacturers Choose Us:
- Over 20 years of electronic paste development
- Complete portfolio for PERC, TOPCon & HJT technologies
- Dedicated R&D team representing approximately 26% of employees
- Production capacity of approximately 300 MT per month
- ISO 9001, ISO 14001 & ISO 45001 certified
- Comprehensive in-house quality and reliability testing
- Proven experience supporting high-efficiency solar cell production
- Strong technical support from product evaluation to mass production

We are a manufacturer specializing in high-performance solar cell pastes and conductive materials. We specialize in metallization materials for TOPCon and PERC solar cell manufacturing and work with manufacturers to improve cell efficiency, reduce bow, and optimize paste consumption.

Why Leading Manufacturers Choose Us:
- Over 20 years of electronic paste development
- Complete portfolio for PERC, TOPCon & HJT technologies
- Dedicated R&D team representing approximately 26% of employees
- Production capacity of approximately 300 MT per month
- ISO 9001, ISO 14001 & ISO 45001 certified
- Comprehensive in-house quality and reliability testing
- Proven experience supporting high-efficiency solar cell production
- Strong technical support from product evaluation to mass production

Why Aluminum Paste Matters:
Rear aluminum paste covers most of the back surface and forms the BSF during firing. A well-designed paste improves voltage, efficiency, wafer flatness, and long-term reliability.

To draw V I characteristics of solar cell, instrument comprises of moving coil meters fitted on panel with power supply, lamp house solar cell mounted supplied with wooden plank

Mitsubishi solar cell manufacturing equipment.

Mitsubishi Solar Cell Manufacturing Equipment

Solar Cell Manufacturing Plant in excellent condition
Equipment overview
Photovoltaic cell manufacturing equipment
Single crystal type, cell size 156.3 �? 156.3 (M
Manufacturing capacity 80 MW / year
Elapsed years after facility introduction January 2011 mass production operation
2. Equipment owned (attached with detailed list)
(1) Production facility

Cleaning device
Damage layer etching apparatus
Texture etching equipment
Phosphor glass etching equipment: 2 units (There are 2 lines on No. 6 line)
Oxide film removal equipment
Diffusion furnace, thermal oxidation furnace: 10 units (6 units for diffusion, 4 units for thermal oxidation)
Plasma CVD apparatus: Three (2 TB type, MCXS type, but no vacuum pump)
Printing drying furnace: 3 units (2 units for electrode printing, 1 unit for dopant printing)
Printing drying Firing furnace: 1 unit
Printing machine: 6 units (2 electrode printing: 2 units, 1 electrode printing: 2 units, dopant printing: 1 unit)
IV inspection machine: 3 units (1 unit for half cut, 1 unit for full size, 1 unit for remeasurement)
Wafer distributor (with inspection device.Wafer thickness, dimensions, etc.)
Various conveying devices (some control parts are taken, operation can not be guaranteed)
Laminator: 4 (NPC made 2 units, Nisshinbo made 2 units)
Plasma etching equipment (not subject to sale as it is sold to manufacturers)

(2) Inspection machine, measuring instrument
Sheet resistance measuring instrument: 2 units
Reflectance measuring device: 2 units
Ellipsometer: 2 units

(3) Other equipment / jig
Printing mask cleaning device: 1 unit
Tube washer (quartz parts wash): 1 unit
Jigs such as each carrier, quartz boat, stack jig
CVD exhaust gas burn-off device

ITEM DESCRIPTION

Application The Cluster type equipment for the manuf acture of CIGS Solarcell.
Mo layer-CIGS la yer- IZnO-TCO layer etc. Sequentially form ation.


Substrate Type Glass & Wafer


Substrate Size ~ 200mm (option)

Metal Sputter Mo,ZnO,TCO


CIGS Evaporator Cu,In,Ga,Se Using effusion source

Glass Heating Max 300

ITEM DESCRIPTION

Application The Cluster type equipment for the manuf acture of a-Si Solar Cell. Back Contact la yer
Absorb layer-Front contact layer etc. S equentially formation.

Substrate Type Glass & Wafer

Substrate Size ~ 200mm (option)

Metal Sputter AZO,Ag & etc

PE-CVD PIN Layer

Glass Heating Max 300 C

For the production of thin film and solar cell encapsulation substrates with high strength requirement
The solar polyester film can protect the solar panel.

High-capacity prismatic lithium cells offering superior energy density, long cycle life, and reliable performance for large-scale storage systems.

Efficient lithium-ion battery cells offering dependable energy storage, high safety standards, and excellent durability for commercial and industrial applications.

Solar Panels are advanced energy conversion devices designed to capture sunlight and convert it into usable electrical power through photovoltaic technology. They provide a clean and renewable energy solution for residential, commercial, and industrial applications, helping reduce dependency on conventional power sources and lowering long-term electricity costs.

These panels are engineered with high-efficiency solar cells that ensure strong performance even under varying sunlight conditions. Their durable construction allows reliable operation over long periods, making them suitable for rooftop installations, ground-mounted systems, and off-grid power setups. The panels are designed to deliver stable energy output while maintaining consistent efficiency across different weather conditions.

Key Specifications:

Type: Photovoltaic solar energy conversion panel
Cell Technology: High-efficiency monocrystalline or polycrystalline silicon cells
Power Output Range: Available in multiple wattage options depending on system requirement
Efficiency Rate: Optimized for high sunlight-to-electricity conversion performance
Frame Material: Corrosion-resistant aluminum alloy for structural strength
Glass Cover: Tempered anti-reflective glass for enhanced light absorption and protection
Operating Temperature Range: Designed to perform in a wide range of environmental conditions
Installation Type: Suitable for rooftop, ground-mounted, and hybrid solar systems
Electrical Output: Direct current (DC) generation compatible with inverters and storage systems
Durability: Built to withstand wind pressure, rain exposure, and general environmental stress
Maintenance: Low maintenance requirement with long operational lifespan

These solar panels are ideal for reducing energy bills and supporting sustainable power generation. They can be integrated into both small-scale home systems and large-scale energy projects. With efficient energy capture and reliable performance, they offer a practical solution for modern energy needs while promoting long-term energy independence.

Specifications:
- Original: Da Nang, Vietnam
- Material : Bamboo, Silk, Fabric
- Feature: Non-toxic, non-irritation, flexible, can be mass-produced, lightweight
- Dimension: 30cm, 35cm, 40cm, 45cm, 60cm, 80cm
- Design: We have over 10 shapes and all colors for your choice
- Usage: Decor, gift, using, and etc
- Payment: 30% deposit and the rest before the shipment
- Package: Wrap in PE bag and carton box with foam inner and outer box with export standard or according to customer's demands
- Price: Please tell me your request, our quotation will satisfy you
- Payment term: T/T 40% in advance, 60% on scan bill or L/C at sight 100%
- Delivery time: 10 - 15 days

Solar Panels are advanced energy conversion devices designed to capture sunlight and convert it into usable electrical power through photovoltaic technology. They provide a clean and renewable energy solution for residential, commercial, and industrial applications, helping reduce dependency on conventional power sources and lowering long-term electricity costs.

These panels are engineered with high-efficiency solar cells that ensure strong performance even under varying sunlight conditions. Their durable construction allows reliable operation over long periods, making them suitable for rooftop installations, ground-mounted systems, and off-grid power setups. The panels are designed to deliver stable energy output while maintaining consistent efficiency across different weather conditions.

Key Specifications:

Type: Photovoltaic solar energy conversion panel
Cell Technology: High-efficiency monocrystalline or polycrystalline silicon cells
Power Output Range: Available in multiple wattage options depending on system requirement
Efficiency Rate: Optimized for high sunlight-to-electricity conversion performance
Frame Material: Corrosion-resistant aluminum alloy for structural strength
Glass Cover: Tempered anti-reflective glass for enhanced light absorption and protection
Operating Temperature Range: Designed to perform in a wide range of environmental conditions
Installation Type: Suitable for rooftop, ground-mounted, and hybrid solar systems
Electrical Output: Direct current (DC) generation compatible with inverters and storage systems
Durability: Built to withstand wind pressure, rain exposure, and general environmental stress
Maintenance: Low maintenance requirement with long operational lifespan

These solar panels are ideal for reducing energy bills and supporting sustainable power generation. They can be integrated into both small-scale home systems and large-scale energy projects. With efficient energy capture and reliable performance, they offer a practical solution for modern energy needs while promoting long-term energy independence.

Solar Panels are advanced energy conversion devices designed to capture sunlight and convert it into usable electrical power through photovoltaic technology. They provide a clean and renewable energy solution for residential, commercial, and industrial applications, helping reduce dependency on conventional power sources and lowering long-term electricity costs.

These panels are engineered with high-efficiency solar cells that ensure strong performance even under varying sunlight conditions. Their durable construction allows reliable operation over long periods, making them suitable for rooftop installations, ground-mounted systems, and off-grid power setups. The panels are designed to deliver stable energy output while maintaining consistent efficiency across different weather conditions.

Key Specifications:

Type: Photovoltaic solar energy conversion panel
Cell Technology: High-efficiency monocrystalline or polycrystalline silicon cells
Power Output Range: Available in multiple wattage options depending on system requirement
Efficiency Rate: Optimized for high sunlight-to-electricity conversion performance
Frame Material: Corrosion-resistant aluminum alloy for structural strength
Glass Cover: Tempered anti-reflective glass for enhanced light absorption and protection
Operating Temperature Range: Designed to perform in a wide range of environmental conditions
Installation Type: Suitable for rooftop, ground-mounted, and hybrid solar systems
Electrical Output: Direct current (DC) generation compatible with inverters and storage systems
Durability: Built to withstand wind pressure, rain exposure, and general environmental stress
Maintenance: Low maintenance requirement with long operational lifespan

These solar panels are ideal for reducing energy bills and supporting sustainable power generation. They can be integrated into both small-scale home systems and large-scale energy projects. With efficient energy capture and reliable performance, they offer a practical solution for modern energy needs while promoting long-term energy independence.

Our solar panels are made with high-quality materials and components, ensuring durability and long-lasting performance.
They are designed to efficiently convert sunlight into electricity, providing you with clean and renewable energy.
Our solar panels are easy to install and maintain, making them a great option for homeowners and businesses alike.
We offer a variety of solar panel kits to fit your needs and budget.
We also provide installation and maintenance services to ensure that your solar panels are operating at peak efficiency.

Utility-scale photovoltaic plants (Grid-Tied PV Systems with Battery Storage) for sustainable energy generation. Engineered for efficiency (EPC Turnkey Execution).

1)High efficiency solar cells with more than 21% efficiency.
2)Anti-reflective and anti-soiling surface reduces power loss from dirty and dust.
3)Excellent mechanical load resistance:Certified to withstand high wind loads(2400Pa) and snow loads(5400Pa).
4)High salt and ammonia resistance

Product name Pandent Lights
Main material Bamboo Art
Style Vintage Modern Decorative
Color Customized Color
MOQ1000 Pcs
Key word Modern Indoor Lighting
Finish Painting

Product positioning
- Brand: Global AgriShield
- Product: Solar Agricultural Pest Trap
- Company: Global Organic Vege Company, India
- Power: Solar-powered
- Application: Agricultural farms, vegetable crops, orchards, nurseries and protected cultivation
- Purpose: Helps attract and control flying agricultural pests, reducing pest pressure and supporting integrated pest management (IPM).
- Target customers: Farmers, agricultural distributors, FPOs, commercial farms, greenhouses and agri-input dealers.
- Export markets: UAE, Saudi Arabia, Oman, Qatar, Kuwait, Africa and other agricultural markets.
Key selling points
- Solar-powered operation
- Reduced dependence on grid electricity
- Suitable for agricultural fields
- Helps manage flying insect/pest populations
- Designed as a cost-effective farm protection solution
- Can complement reduced-pesticide/IPM farming practices
- Suitable for outdoor agricultural deployment

Gallium metal with a content of 99.99% (also known as Ga-4N) is a common high-purity specification, widely used in fields such as electronics, semiconductors, LEDs, solar cells, and optical materials. It is prepared through purification processes such as acid washing, alkaline electrolysis, or zone melting, and serves as an intermediate product for the preparation of ultra-pure gallium (such as over 99.9999%). Its core characteristics are its low melting point (<30) and excellent thermal and electrical conductivity.

Solar Chargers for Phones are portable charging devices that use solar energy to recharge smartphones and other small electronic devices.They provide a reliable backup power source when conventional electricity is unavailable, ensuring that mobile devices remain charged in remote or off-grid locations.
Key Specifications
Product Type: Portable Solar Phone Charger
Solar Panel Type: Monocrystalline / Polycrystalline
Power Output: 5W to 30W (portable models), higher for advanced units
Battery Capacity (if built-in): 5,000 mAh to 30,000 mAh
Output Ports: USB-A, USB-C (varies by model)
Charging Output: 5V / 2A to fast-charging support (QC/PD in advanced models)
Efficiency: Up to 20 - 25% solar conversion efficiency
Design: Foldable, portable, or backpack-integrated options
Durability: Water-resistant, dustproof, and shock-resistant construction
Compatibility: Smartphones, power banks, GPS devices, smartwatches, and small electronicties and emergency backup powsties and emergency backup pow

Solar Chargers for Cars are eco-friendly charging devices that use solar energy to maintain and recharge vehicle batteries. Designed with high-efficiency photovoltaic panels, these chargers convert sunlight into electrical power, helping keep car batteries charged during periods of inactivity and reducing battery drain. Solar car chargers are ideal for cars, SUVs, trucks, RVs, boats, and other vehicles, especially when parked outdoors for extended periods.
Key Specifications
Product Type: Solar Battery Charger for Vehicles
Solar Panel Type: Monocrystalline or Polycrystalline
Power Output: 5W to 200W+ (depending on model)
Voltage Output: 12V / 24V
Charging Method: Direct Battery Charging or Maintenance Charging
Efficiency: Up to 20 - 25% (depending on panel technology)
Connector Types: Cigarette Lighter Plug, Battery Clamps, SAE Connectors
Weather Resistance: Waterproof and UV-Resistant Construction
Installation: Portable, Dashboard-Mounted, Roof-Mounted, or External Mounting
Applications: Cars, SUVs, Trucks, RVs, Boats, Motorcycles, and Utility Vehicles

This product is an integrated solar variable frequency pump system, consisting of solar PV panels, energy storage batteries, a PV charge controller, an inverter output module, and a variable frequency pump unit. It operates independently using solar energy to drive the pump for water supply.

Ideal for off-grid areas, agricultural irrigation, domestic water supply, and livestock watering. Features include:

Energy-saving & environmentally friendly
Stable and reliable operation
Plug-and-play design
Remote monitoring, control, and parameter adjustment via mobile mini-program (WeChat)

Solar Panel Cleaning System, Water Fed Brush and Extendable Telescopic Poles with Hose











Package Includes all the accessories:
1 x Telescopic pole
1 x Brush head
1 x Angel adapter
1 x 12m/39ft water pipe
1 x 8m/26ft water pipe,6pcs x 10cm Water Pipes
1 x EN-copper quick connect
1 x Plastic quick connect
1 x Faucet quick connect
4pcs x Hose fittings
1 x M4 Screwdriver
1 x Product Manual



















Additional information



Weight
N/A


Dimensions
N/A


Size
12FT/3.6M, 18FT/5.4M, 20FT/6M, 24FT/7.2M, 30FT/9M, 36FT/10.8M

Our Solar Tall Tubular Battery is a deep cycle battery specially designed for solar applications.
It has a long lifespan, making it a cost-effective investment.
The battery is also low maintenance, requiring only occasional topping up of the electrolyte.
It is a reliable and efficient battery that can provide backup power for your home or business during a power outage.

Salient Features
Highly efficient 3-phase water filled motor
- Easily rewindable
- Dynamically balanced design
- Extended life with flawless performance
- Thrust bearing : Carbon + S.S. material for High thrust load capacity
- 100% EC grade copper winding
- Presenting world 1st design (design registered 100% fully S.S.-304 investment casting pumps.
- Zero maintenance
- Superior performance
- Sand proof operation
- Highly efficient 3-phase water filled motor

Product Specification
Power Range : 1.0 HP to 20.0 HP
Operating Speed : 0 - 2890 RPM
Operating Frequency : 0 - 50 Hz
Input Solar DC Power Range : 900 Wp, 20000 Wp
Input Solar DC Voltage Range : 110 Vmp - 600 Vmp
Head Range : 30 Mtr , 220 Mtr
Discharge Range : 10000 LPD - 420000 LPD
Type of Duty : S1

material of construction - motor
Part Grade
Body Lock : Spring Steel
Stud Ring : M.S. (Zinc Coated)
Stator Stamping : CRNGO - M45 Silicon
Winding Wire : 100% EC Copper
Shaft : SS-420
Rotor Stamping : CRNGO - M45 Silicon
Copper Lamination : 100% EC Copper
Upper Housing : SS-304
Lower Housing : SS-304
Connection Piece : SS-304
Oil Seal : NBR
TB Set : Carbon + SS
Base : SS-304
Drain Plug : Brass
Couple Sleeve : Stainless Steel
Water Bolt : Brass

MATERIAL OF CONSTRUCTION PUMP
Part Grade
Suction : SS-304
Couple : Stainless Steel
Couple Counter : SS-304
Rubber Seal : NBR
Bush Seal Cover : SS-304
Bowl : SS-304
Impeller : SS-304
Key : SS-410
Bowl Bush : NBR
Bush : LTB-4
Middle : SS-304
Cap : NBR
Outlet : SS-304

313 Units of Clean Cell Phones

Clean Cell Phones are professionally tested, fully functional pre-owned mobile phones that have been inspected, data-wiped, cleaned, and graded for resale or export. These devices are ideal for wholesalers, retailers, refurbishers, and international buyers seeking reliable used smartphones at competitive prices.
If you are intrested Contact us:

LDPE Clear Solar Film Plastic Scrap
MATERIAL: LDPE Clear Solar Film
CATEGORY: LDPE
TYPE: Film
GRADE: Clear
SPECIFICATION: 100% LDPE, Used in organic farming so no additives, packed in loose rolls; loss rate 50%; Roof film
ORIGIN: US
LOADING WEIGHT: 17 Tons
FOB (USD/Ton): 350-450

EAP460W

EAP400-420 120CELL 210MM Black

500W-520W power range
21.7% module efficiency

4.5% lower LCOE
5.6% lower system cost

LID / LeTID mitigation
Up to 50% lower degradation

Utility grade
Guaranteed compatibility

Improved shade tolerance

Built to withstand real-world conditions.
Rated for heavy snow loads up to 5400 Pa and
wind loads up to 2400 Pa
Advanced manufacturing technology minimizes
chances of micro-cracks resulting from impact or heat.

Power Warranty - Guaranteed power
98% for 1st year
< 0.5%/yr. to year 25
Enhanced coverage on materials and workmanship

360W-380W power range

4.5% lower LCOE
5.6% lower system cost

LID / LeTID mitigation
Up to 50% lower degradation

Utility grade
Guaranteed compatibility

Improved shade tolerance

Built to withstand real-world conditions.
Rated for heavy snow loads up to 5400 Pa and wind loads up to 2400 Pa

Advanced manufacturing technology minimizes chances of micro-cracks resulting from impact or heat

Power Warrranty- Guaranteed power
98% for 1st year
< 0.5%/yr. to year 25

Enhanced coverage on materials and workmanship

340W-360W power range
20% module efficiency

4.5% lower LCOE
5.6% lower system cos

LID / LeTID mitigation
Up to 50% lower degradation

Utility grade
Guaranteed compatibility

Improved shade tolerance

Built to withstand real-world conditions.
Rated for heavy snow loads up to 5400 Pa and wind loads up to 2400 Pa

Advanced manufacturing technology minimizes chances of micro-cracks resulting from impact or heat.

Guaranteed power
98% for 1st year
< 0.5%/yr. to year 25

Enhanced coverage on materials and workmanship

180W-200W power range
20.2% module efficiency

4.5% lower LCOE
5.6% lower system cost

LID / LeTID mitigation
Up to 50% lower degradation

Utility grade
Guaranteed compatibility

Improved shade tolerance

Built to withstand real-world conditions.
Rated for heavy snow loads up to 5400 Pa and wind loads up to 2400 Pa

Advanced manufacturing technology minimizes
chances of micro-cracks resulting from impact or heat

540W-560W power range
21.8% module efficiency

4.5% lower LCOE
5.6% lower system cost

LID / LeTID mitigation
Up to 50% lower degradation

designed for RELIABILITY

Ruggedized Construction
Built to withstand real-world conditions.
Rated for heavy snow loads up to 5400 Pa and
wind loads up to 2400 Pa

Durable materials
Advanced manufacturing technology minimizes
chances of micro-cracks resulting from impact or heat.

Solar Panels

Glass GRADE
"Glass grade properties" typically refer to the specific characteristics and qualities of glass that determine its suitability for various applications. Glass comes in a wide range of types and grades, each with its own set of properties that make it suitable for different purposes.High grade silica sand manufacturer for Glass Industries serving both Float glass as well as container glass Industries.
We manufacture around 10000 tons of glass grade sand per month. Here are some important glass grade properties:

Properties:
80 - 120 ppm

Transparency: Glass is known for its transparency, allowing light to pass through. The level of transparency can vary based on factors such as the type of glass, its thickness, and any coatings or treatments applied to it.

Hardness: Glass is a hard material, but its hardness can differ based on the specific type of glass. Some glasses are more scratch-resistant than others.

Salient Features
Highly efficient 3-Phase Water Filled Motor
- 100% EC grade copper winding
- Easily Rewindable
- Motor Designed with Higher Cooling Effect Ensures Longer Life
- Sustainable uniform performance for years
- Ensures long life durability
- Optimized Hydraulic & Mechanical Design
- Improved efficient performance
- Excellent output in Low Radiation
- Dynamically balanced design
- Zero maintenance

Product Specification
Power Range : 3.0 HP to 10.0 HP
Operating Speed : 0 - 2890 RPM
Operating Frequency : 0 - 50 Hz
Input Solar DC Power Range : 3000 Wp, 10000 Wp
Input Solar DC Voltage Range : 330 Vmp , 600 Vmp
Head Range : 10 Mtr , 50 Mtr
Discharge Range : 126000 LPD , 425000 LPD
Type of Duty : S1

Material Of Construction
Part Grade
Oil Seal : Nitrile butyl rubber
Motor Shaft : SS - 420
Motor Body : Cast Iron / J4
Motor Bush : LTB-4 / Teflon
Thrust bearing assembly : SS - 420 & Carbon
Base : Cast Iron
Bracket : Cast Iron
Flange : Cast Iron
Casing : Cast Iron
Impeller : Cast Iron

The SSP Series Solar Pumping System is a solar-powered water-lifting solution designed for agricultural irrigation, livestock watering, gardening, and remote water-supply applications. It combines a solar-compatible electric pump with photovoltaic power equipment to support dependable water delivery while reducing reliance on conventional electricity. Depending on the selected model, the system can be configured for surface-water sources, open wells, or suitable borewell installations. Its practical construction supports straightforward installation, routine maintenance, and flexible project sizing. Available with different motor powers, flow capacities, pumping heads, and control options, the SSP Series provides a versatile solution for farms, rural infrastructure, and other clean-water pumping requirements.

Key Specifications
Specification Details
Product Type SSP Series Solar Pumping System
Model / Series SSP Series
Pump Design Surface or submersible pump, depending on model
Power Source Solar photovoltaic power system
Motor Type Solar-compatible electric motor
Pump Material Stainless steel, cast iron, or engineering-grade materials, depending on model
Color Metallic, blue, or manufacturer-specific finish
Construction Compact, solar-compatible pumping assembly
Motor Power Available in different HP / kW configurations
Voltage Available in different AC or DC configurations, depending on model
Frequency 50 Hz or as specified for the selected configuration
Flow Capacity Available in different discharge options

The V8V9 MRS Solar Pumping System is a configurable water-lifting solution designed for agricultural irrigation, livestock watering, and remote water-supply applications. The V8V9 MRS designation can be used for a model series covering different pumping capacities and configurations. Depending on the selected version, the system may incorporate a surface or submersible pump, solar-compatible motor, and dedicated controller. Its modular arrangement supports efficient water delivery, convenient installation, and flexible project sizing. Suitable for farms, gardens, reservoirs, and rural infrastructure, it can be supplied with different motor powers, flow rates, pumping heads, and electrical configurations to meet buyer-specific requirements.

Key Specifications
Specification Details
Product Type V8V9 MRS Solar Pumping System
Model / Series V8V9 MRS
Pump Design Surface or submersible pump, depending on model
Power Source Solar photovoltaic power system
Motor Type Solar-compatible electric motor
Pump Material Stainless steel, cast iron, or engineering-grade materials, depending on model
Color Metallic, blue, or manufacturer-specific finish
Construction Compact, solar-compatible pumping assembly
Motor Power Available in different HP / kW configurations
Voltage Available in different AC or DC configurations, depending on model
Frequency 50 Hz or as specified for the selected configuration
Flow Capacity Available in different discharge options
Pumping Head Available in different head configurations
Solar Panel Capacity Selected according to pump power and operating requirements

The AC Solar Pumping System - Surface Pump is a reliable solar-powered water-lifting solution designed for irrigation, agricultural water transfer, and other clean-water applications. It combines a surface-mounted AC pump with a solar-compatible power system to deliver dependable water flow without requiring continuous grid electricity. The system is suitable for farms, gardens, livestock facilities, and remote water-supply projects where access to conventional power may be limited. Its practical design supports easy installation, routine maintenance, and flexible system configuration. Available with different pump capacities, solar power requirements, and control options, it offers an efficient solution for reducing operating costs and improving water availability.

Key Specifications
Specification Details
Product Type AC Solar Pumping System - Surface Pump
Pump Design Surface-mounted centrifugal pump
Power Source Solar photovoltaic power system
Motor Type AC electric motor
Pump Material Cast iron, stainless steel, or engineering-grade materials, depending on model
Color Metallic, blue, or manufacturer-specific finish
Construction Compact, surface-mounted pump assembly
Motor Power Available in different HP / kW configurations
Voltage Single-phase or three-phase AC, depending on model
Frequency 50 Hz or as specified by buyer
Flow Capacity Available in different discharge options
Pumping Head Available in different head configurations
Solar Panel Capacity Selected according to pump power and operating requirements
Controller Solar pump controller / inverter-compatible system

Customized solar modules (30mW-600W) with >700MW annual output
Light Weight Solar Panels : 50W to 200W optional
Flexible Solar Panels : 10W to 200W
Foldable Solar Chargers : 10W to 400W
Rigid Solar Panels : 5W to 550W available
Customized Solar Panels : 30mW to 20W or higher
Solar System : up to 800W
Power Output : 100W - 700W
Module Efficiency : 18% - 23%
Cell Type : Mono PERC, TOPCon, N-Type
Maximum System Voltage : 1000V / 1500V DC
Frame Material : Anodized Aluminum Alloy
Front Glass : 3.2 mm Tempered Low-Iron Glass
Junction Box : IP68 Rated
Operating Temperature : 40C to +85 C
Warranty : 12 - 15 Years Product, 25 - 30 Years Performance

Solar glass is a specially developed glass for solar cell. It is made of unique formulation and high quality material with iron content less than 120PPM. By adopting international first-rate production technology and equipment, it has special suede and flower pattern design. This product has the characteristics of high luminousness, high stability, waterproof and high safety factor, etc. Our product has become the first selected product of solar cells, solar water heater assembly.

Anti-reflective Coating Photovoltaic Solar Glass
Though adding AR film coated on the Solar glass, we can get higher Light transmittance and Lower light reflectance. Solar coated glass in the solar ultra clear glass plating anti reflective film and then processed by the strengthening of the products. It can effectively reduce solar reflectance, thereby improving through the solar ratio, ultimately improve solar generating capacity.

Applications
Monocrystalline and polycrystalline solar cells
Solar water heater

Specification :

Thickness: 3.2-12mm (3.2mm&4mm)
Max.size: 2250×3500mm (annealed)
1830×2600 mm(tempered)
Pattern: matt/patterned, matt/matt, low iron float glass
Solar energy transmittance : ( 3.2mm polished samples ISO9050/2003)
91.7%, without AR coating
94.7%, with AR coating
Iron content: 120ppm(Fe2O3)

Standard :

JC/T 2001, Chinese standard.
EN 572.5, European standard.
EN 12150.1, European standard.

Solar glass is a specially developed glass for solar cell. It is made of unique formulation and high quality material with iron content less than 120PPM. By adopting international first-rate production technology and equipment, it has special suede and flower pattern design. This product has the characteristics of high luminousness, high stability, waterproof and high safety factor, etc. Our product has become the first selected product of solar cells, solar water heater assembly.

Anti-reflective Coating Photovoltaic Solar Glass
Though adding AR film coated on the Solar glass, we can get higher Light transmittance and Lower light reflectance. Solar coated glass in the solar ultra clear glass plating anti reflective film and then processed by the strengthening of the products. It can effectively reduce solar reflectance, thereby improving through the solar ratio, ultimately improve solar generating capacity.

Applications
Monocrystalline and polycrystalline solar cells
Solar water heater

Specification :

Thickness: 3.2-12mm (3.2mm&4mm)
Max.size: 2250×3500mm (annealed)
1830×2600 mm(tempered)
Pattern: matt/patterned, matt/matt, low iron float glass
Solar energy transmittance : ( 3.2mm polished samples ISO9050/2003)
91.7%, without AR coating
94.7%, with AR coating
Iron content: 120ppm(Fe2O3)

Standard :

JC/T 2001, Chinese standard.
EN 572.5, European standard.
EN 12150.1, European standard.

Power supply is generated by hydropower, wave power / wave energy, coal fired, nuclear, wind power and also solar from sunlight

The safest means is by solar power followed by wind power as they are environment friendly. Solar power is the conversion of energy from sunlight into electricity either directly using photovoltatics, indirectly using concentrated solar power which uses lenses or mirrors with tracking systems to focus on a large area of sunlight into a small beam. Made from efficient solar cells and conforming to international standards, performance and reliability are not compromised.

Advantages of using solar system are:

Solar power is a renewable resource
Non-polluting
Energy and heat from the sun is free
Solar cells require little maintenance
No moving parts to be replaced or maintained
Replacement after 20 years
Very versatile used in cars, water heaters, buildings, satellite, aviation, street lighting, remote telecommunications systems, highway emergency phones

Product Specification
Power Range : 1.0 HP to 2.0 HP
Operating Speed : 0 - 3100 RPM
DC Power Range : 900 Wp - 2000 Wp
DC Voltage Range : 70 Vmp - 110 Vmp
Head Range : 30 Mtr - 90 Mtr
Discharge Range : 8000 LPD - 30000 LPD
Type of Duty : S1

- Zero Running Cost
- Less Maintenance
- Eco-Friendly
- Simple Installation
- Pollution Free

Material Of Construction - Motor
Part Grade
Mechanical Seal : Graphite Ceramic
Motor Shaft : Stainless Steel
Motor Body Pipe : SS-304
Lower Hosing : Aluminum
Diaphragm : High Nitrile butyl rubber
Top Cap : Stainless Steel
Bottom Plate : Stainless Steel
End Cap : Stainless Steel

MATERIAL OF CONSTRUCTION SCREW (HELICAL) PUMP
Part Grade
Outlet : SS-304
Suction : SS-304
Outer Shell : SS-304
Rotor Screw : Stainless Steel
Stator : Rubber Coated Alloy
Material Of Construction Centrifugal Pump
Part Grade
Check valve housing : SS-304
Check valve : PC
Suction : SS-304
Outer Shell : SS-304
Impeller : POM
Bowl : PC
Pump Bush : NBR
Pump Sleeve : Stainless Steel
Pump Shaft : Stainless Steel
Coupling / Pump Couple : Stainless Steel

Solar modules

HIGH EFFICENCY PV MODULE
The John-Kenndu JKG-130 series module are designed especailly with the transparant TPT
for a better photovoltaic application in the cold climat. The outstanding resistances to the
toughe weathe and moisture make the products have a better durability.

Type:
JKG-130 Framed module in black style with junction box and plugs
Cell efficency[%]: 16.5-14.5

Proven materials
Solar cell: 5'' monocrystaline silicon cell by MOTECH
Glass: Super white solar glass
TPT: Transparant
EVA: F+RST TM EVA film
Cable: Length: 100 cm each
Plug: MC4 compatible
Silicon glue: Dowcoring 737 neutral cure sealant-transparant

Product Description :
Monocrystalline Silicon
260 - 335 Watts

Price of product ( USD price or FOB price) :
USD 145.00 - 165.00 / Panel

Product origin :
Europe, Asia

Product Origin :
Europe, Asia

Key Specifications/Special Features :
Off-grid alternative energy sources 72cell pv 260 - 335W solar power

Minimum Order Size and Packgaing details :
Minimum 200 Panels

The multi-functional solar lantern has handy design and durable life, providing safer and more affordable lighting, it is available for people who live especially in rural areas, the solar LED hand light is also a high-power LED lamp, enabling mobile phone, camera and other digital products charging independent from power grids.