Find Verified Metal Metal Products Suppliers, Manufacturers and Wholesalers

Copper Millberry Scrap

Copper Cathode

Kenya origin R50-R65 Used Rail, 1.5m length available.
MOQ 50,000 mt x 12 months
Loading port Mombasa

HBI is a briquetted form of direct reduced iron with a high iron content (>90%). The chemical composition of the HBI we supply is consistent, with low levels of harmful impurities, such as phosphorus and sulphur. It is free from other harmful elements, such as copper, nickel, and any non-metallic compounds.

Purity Copper cathodes are at least 9995 pure 
Dimensions Copper cathodes can vary in size but are typically around 914 mm x 914 mm x 12 mm 
Weight Copper cathodes can weigh around 125 kg per sheet 
Electrical resistivity Copper cathodes are tested for electrical resistivity using Test Method B 193 
Composition Copper cathodes contain trace amounts of other elements such as bismuth tellurium silver and selenium 
Copper cathodes are produced from copper ore through smelting and electrorefining to remove impurities They are the primary raw material for copper rods used in the wire and cable industry Copper is also used in the production of brass copper tubes and copper sheets

Purity Copper cathodes are at least 9995 pure 
Dimensions Copper cathodes can vary in size but are typically around 914 mm x 914 mm x 12 mm 
Weight Copper cathodes can weigh around 125 kg per sheet 
Electrical resistivity Copper cathodes are tested for electrical resistivity using Test Method B 193 
Composition Copper cathodes contain trace amounts of other elements such as bismuth tellurium silver and selenium 
Copper cathodes are produced from copper ore through smelting and electrorefining to remove impurities They are the primary raw material for copper rods used in the wire and cable industry Copper is also used in the production of brass copper tubes and copper sheets

Non-Ferrous Metals

The most commonly used non-ferrous metals are copper, lead, zinc, nickel, cobalt, and precious metals. Millions of tonnes of nonferrous scrap are recovered annually and used by different types of industries. Secondary materials are essential to the industry’s survival because even new metals often require the combined use of recycled materials.

Aluminium UBC scrap refers to Used Beverage Cans, a high-purity, post-consumer aluminum material collected for recycling, baled (pressed) into dense blocks, and melted down to create new aluminum products, offering huge energy savings (up to 92%) over virgin aluminum and reducing landfill waste. This silvery-white scrap, prized for its purity (often 99%+), must be free from steel, plastic, dirt, and liquids to meet quality standards (ISRI specs) for making ingots and billets for automotive, construction, and packaging.
Key Characteristics & Quality
Composition: Nearly pure aluminum from beverage cans, free of contaminants like steel, lead, plastic liners, and liquids.
Purity: High (99% to 99.9%), leading to excellent recovery rates.
Form: Typically baled or hydroformed into dense bricks (around 35-50kg) for efficient transport and handling.
Appearance: Silvery-white with smooth surfaces.

We currently have ready stock of Aluminum Extrusion Scrap, Grade 6063, available for immediate shipment. The material is clean, with minimal attachments, and consists of solid, high-quality extrusions suitable for remelting and manufacturing applications.

Origin: Germany/Thailand/Malaysia, etc.
Quality: Consistent grade 6063, thoroughly inspected and properly segregated
Availability: Ready for dispatch
Payment Terms: L/C (Letter of Credit) or T/T (Telegraphic Transfer)

Kindly let us know your required quantity and destination port so we can provide the best offer and shipping schedule.

We currently have ready stock of Aluminum Extrusion Scrap, Grade 6063, available for immediate shipment. The material is clean, with minimal attachments, and consists of solid, high-quality extrusions suitable for remelting and manufacturing applications.

Origin: Singapore
Quality: Consistent grade 6063, thoroughly inspected and properly segregated
Availability: Ready for dispatch
Payment Terms: L/C (Letter of Credit) or T/T (Telegraphic Transfer)

Kindly let us know your required quantity and destination port so we can provide the best offer and shipping schedule.

Purity: 99.9% (Free from Nuts / Steel plate / paint)
Material : 14 inch/ 15inch / 17inch / 18inch /
Monthly Capacity: 1000 Metric Tons
Packing : containerize.
Minimum Order: 46 METRIC TONS
Packing: Average 21 MT in 20â?² HC containers

source : turkey and kenya

Production Features:
1. Our Copper Wire Scrap is High purity, fine organization.

2. Low oxygen levels. Without porosity/ trachoma/ osteoporosis

3. Very good conductivity and thermal conductivity, good plastic,easy to hot and cold pressure processing.

Our experienced 24/7 technical support, rapid on time delivery and export to anywhere in the world has given us the reputation as a reliable supplier of scrap metal, scrap copper wire. Customers can rely on us for current copper prices and copper price per ton.

CHEMISTRY
1Determined by difference.
Other elements tested (<0.01%): Al, As, B, Be, Bi, Cd, Co, Cr, Fe, Mg, Mn, Mo, Nb, Ni, P, Pb, Sb, Se, Si, Sn, Te, Ti, V, Zn, & Zr.
Results in weight percent unless otherwise indicated.
Method(s): CSP 017 Rev. E (ICP-AES)
UTILITY OF COPPER
Utility of copper was determined by weighing copper material in comparison to the total weight of cable for the given length.
Element
Sample
Cu1
>99.90 Pure Copper
Utility of Copper
Weight of Sample (grams) 197.66
Weight of Copper (grams) 142.10
% Utility of Copper 71.9% Yield

Copper Milberry Scrap

UBC Aluminium Pressed Cans consist of clean, used beverage cans that are 100% recyclable. The cans are compressed into bales for easy handling and transportation.



Composed primarily of post-consumer aluminum beverage cans.
Free from contaminants such as food residues, plastics, glass, paper, or other non-aluminium materials.
Free from excessive moisture, oil, grease, or other impurities.
Bales are tightly packed to minimize space and maximize efficiency during transport.

We are supplying high quality heavy melting scraps HMS 1/2 80:20.

We load container basis as well as break bulk shipments.

We follow the ISRI standards. No rail roads included. Buyers can arrange their Inspection before the shipments (PSI).

Payments by LC for the orders more than 500 MT.

We supply HMS 1 & 2 Scrap (Heavy Melting Steel) that conforms to ISRI standards, suitable for steel mills, foundries, and metal recyclers.

A wide range of customizable copper fittings from cross over bend, tripod, u bend (return bend), access valves and REFNET for all HVACR manufacturing needs.

We can supply LME registered Aluminum Ingots A7. Origin Russia.
SPECIFICATIONS: Al-purity is 99.70 %.
PACKING: palletized banded by Aluminum bands.
PACKAGE: packed with Aluminum band in bundles.
NET WEIGHT OF EACH BUNDLE: 1000-1200 kg (+/-1%)
MINIMUM WEIGHT IN EACH CONTAINER: 25 MT approximately.
GROSS WEIGHT OF EACH CONTAINER: 25.2 MT approximately

The basic raw material to the steel industry is a crucial element in shaping the pricing and availability of quality steel. As recent times have shown the demand of steel is ever increasing and therein lays a critical need for efficient and reliable deliveries. IMT has ability to source Iron grades ranging from 45 Fe to 63.50 Fes of Haemetite from their various associates Mine Owners and Trading Export Houses in India. IMT also has close connections with few low grade Magnetite producing Mine Owners in States of Goa and Orissa.

MT has Infrastructure base in States of Karnataka,Goa and Orissa for Indentifying the Commodity from respectable Export Houses. IMT also has close relations with few of the Respectable Top Buyers of Iron ore based in Peoples Republic of China,Singapore and Hong Kong.IMT understands the needs of its valued buyers of honouring Commitments of quality and quantity.

IMT has initiated the process of building relationship with some top traders/miners from Australia & South American Countries like Barzil and Venezuala for procurement of iron ore. IMT has regularly been sending their representatives to these countries for negotiations of long term interests. IMT believes that the knowledge base in the industry will help in creating a cordial environment with these Countries sellers.