Find Verified Silicon Wafer Suppliers, Manufacturers and Wholesalers

Product Name Methyltrichlorosilane
CAS No. 75-79-6
MF CH3Cl3Si
EINECS: 200-902-6
Appearance liquid
Packing 180kg drum
Shelf life 2 Years

Application
It is mainly used to produce crosslinking agents such as methyltriethoxysilane and methyltrimethoxysilane, silicone resin, special coatings, building waterproofing agents, and oilfield drilling anti-collapse agents (sodium methyl silicate).

Physical character: made with high quality silicone rubber on drum-type vulcanizing press or vulcanizing press according to the different request from the buyers. We depend on the advanced manage, innovative technique and strict quality control with excellent silicone rubber material and machine, ravel out the problem of lower smooth surface and high thickness tolerance of Rotocure vulcanizing machine, and also ravel out the problem of restricted width, length and visible joint on press vulcanizing machine. It is triumphantly without joint and with infinite length under the above mentioned excellence. We have the super-wide drum-type vulcanizing press with 4000mm width and high quality products maximum 3800mm width without joint. High quality silicone rubber with good performance of anti-aging, ozone resistance, heat-resistant, electric insulation, oil resistance, solvent resistance, corrosion resistant, nonpoisonous and tasteless, pollution-free. Working in air, water, oil and other medium at the temperature of -60C - +260C(moment maximum 300C) with the high stability, reliability and surface inactive without sticky. Apply to punch all kinds of rubber seal gasket or special for PVC vacuum laminating press, wooden door vacuum laminating press, glass vacuum laminating press, solar vacuum laminating press, hot laminating press and card laminating press etc.

Specifications:
Material: 100% virgin silicone rubber from Germany or China
Quality: high tear resistant or middle tear resistant
Color: translucent, dark red, black, milk white, grey, blue etc.
Surface: smooth/smooth, smooth/impression fabric, smooth/sanded
Insertion: reinforced and insert 1 PLY fabric
Tensile strength: 7-12mpa
Hardness: 15, 20, 30, 40, 50, 60, 70, 80+/-5shore a
Elongation: 350%-760%
Density: 1.25-1.30g/cm3
Tear strength: 26-42n/mm
Working temperature: -60c - +260c(moment maximum 300c)
Thickness: 0.1-30mm
Width: 0.5-3.8m
Length: 1-50m
Grade: industrial grade, food grade
Press: Germany silicone for "+" and "-" press
Chinese silicone for "-" press only.

-

Graphite Electrodes
Graphite Electrode is made of high-quality low ash materials, such as petroleum coke, needle coke and coal pitch.after calcining,burdening,kneading,forming,baking and pressure impregnation, graphitization and then precision machined with professional CNC machining.such of the products own characteristics with low resistivity, good electrical conductivity ,low ash, compact structure,good anti oxidation and high mechanical strength, Widely used in LF, EAF for steel making industry, Non-ferrous industry, silicon and phosphorus industry.so it is the best conductive material for electric arc furnace and smelting furnace

Rubber Dust Cover

Rubber Dust Covers are engineered to withstand the harshest conditions, providing unparalleled protection and durability. These covers are specifically designed to offer high resistance to temperature fluctuations, ozone exposure, oil spills, and grease, making them ideal for use in demanding environments. Manufactured using top-quality materials such as Neoprene, Nitrile, EPDM, Silicone, and Polyurethane, these dust covers ensure long-lasting performance and reliability.

Common applications for Rubber Dust Covers include control cables, suspension joints, exhaust systems, tie rod ends, and vehicle brake systems. Their robust construction and superior resistance properties make them essential components for maintaining the integrity and functionality of various automotive and industrial systems.



Types and Applications of Rubber Dust Covers
1. Automotive Uses:

Headlight Dust Covers: These caps seal the headlight assembly to prevent moisture and dirt ingress.

Brake Cable Covers: Rubber dust cover caps for motorcycle brake cables are also available, such as a pack of 10 for $5.85.

2. Electronics:

PCIE and Audio Port Covers: Silicone rubber dust covers are designed for protecting PCIE slots and audio ports. These are sold for prices as low as $0.99 to $1.99, depending on the type.

3. Hydraulic Systems:

Quick Coupler Caps: These rubber caps protect hydraulic systems from dirt and dust, ensuring the integrity of the equipment.

4. General Use:

Various Sizes and Shapes: Dust covers are available in multiple sizes and configurations to fit different applications, including bottle pourers and other household uses.

Rubber Dust Covers are engineered to withstand the harshest conditions, providing unparalleled protection and durability. These covers are specifically designed to offer high resistance to temperature fluctuations, ozone exposure, oil spills, and grease, making them ideal for use in demanding environments. Manufactured using top-quality materials such as Neoprene, Nitrile, EPDM, Silicone, and Polyurethane, these dust covers ensure long-lasting performance and reliability.

Common applications for Rubber Dust Covers include control cables, suspension joints, exhaust systems, tie rod ends, and vehicle brake systems. Their robust construction and superior resistance properties make them essential components for maintaining the integrity and functionality of various automotive and industrial systems.

Custom rubber parts made to meet your specific requirements
Sanshi Rubber's custom rubber parts and products include round rubber gasket, molded mechanical rubber parts products, molded mechanical rubber bushings for industry Molded silicone rubber parts, round shape rubber gasket, etc. We use custom compounds and commercial grade rubbers as well as compression, injection and transfer molding equipment. Contact us to learn more.

Sanshi Rubber can provide custom rubber parts and products to meet the specific needs of your project. As an experienced manufacturer of custom rubber parts, we aim to provide you with the best parts to meet your needs.

Application Of Graphite electrodes:Graphite electrodes are used mainly in ladle furnaces,electric-arc furnace steel making,Yellow phosphorus furnace , Industrial silicon furnace or melting copper. They are presently the only products available that have the
high levels of electrical conductivity and the capability of sustaining the extremely high levels of heat generated in this demanding environment.High Quality Needle Coke in HP&UHP graphite electrode,ensure the electrode application is perfect. Graphite electrodes are also used to refine steel in ladle furnaces and in other smelting processes.Characteristics Of Graphite electrodes:
Our graphite electrodes are with low electric resistance, high density, high anti-oxidation capability, precise machining accuracy, especially with low sulphur and low ash will not give steel second time

Description: the natural rubber sheet, gum rubber sheet are made by ROTOCURE vulcanizing press or plain vulcanizing press with high quality natural rubber(NR). The natural rubber is from the natural rubber tree with middling hardness and high tensile strength, high elongation, good abrasion resistance, elasticity, safety and nontoxicity without smell. The pure natural rubber sheet is also named gum rubber sheet or para rubber sheet. 1-6mm thickness is made by ROTOCURE vulcanizing press with shiny surface, 7-80mm thickness is made by vulcanizing press for get higher thick thickness. Working under the higher pressure, wearing resistant, food grade lining status at the temperature of -35°C - +85°C in air or water. Apply to punch all kinds of seals, gaskets, lining and others applications with its good function, for example of truck lining, drinking water lining, rubber membrane special for PVC vacuum laminating press.

Specifications:
material: pure natural rubber or NR/SBR
quality: industrial grade, food grade
color: black, white, brown, beige, red, green etc.
surface: smooth/smooth, smooth/impression fabric, double impression fabric
tensile strength: 2-24Mpa
hardness: 35, 40, 50, 60, 70, 80+/-5shore A
elongation: 170%-760%
density: 1.05-1.70g/cm3
working temperature: -35°C - +85°C
thickness: 1.0-50.0mm
width: 0.1-3.6m
length: 1.0-20m
Insertion: reinforce to insert 1-3PLY fabric

natural rubber lining sheet:
top: cured natural rubber with red or black
bottom: uncured neoprene rubber with light yellow
quality: industrial grade, food grade
surface: smooth/smooth
tensile strength: 13-18Mpa
hardness: 35, 40, 65+/-5shore A
elongation: 400%-650%
density: 1.05-1.15g/cm3
working temperature: -35°C - +85°C
thickness: 1.0-25.4mm
width: 1-1.5m
length: 10-20m

Description: the polyurethane elastomeric material is a new type of polymer synthetic material between rubber and plastic. It has both high strength of plastic and high elasticity of rubber. Its characteristics are: 1, a wide range of hardness. It still has rubber elongation and resilience at high hardness. The polyurethane elastomeric has a hardness range of Shore A10-D80. 2. high strength. At rubber hardness, the tensile strength, tear strength and load carrying capacity are much higher than general rubber material. At high hardness, its impact strength and flexural strength are much higher than plastic material. 3, wear-resistant. Its wear resistance is very outstanding, generally in the range of 0.01-0.10cm3/1.61km, about 3-5 times than rubber material. 4, oil resistant. The polyurethane elastomeric is a highly polar polymer compound which has low affinity with non-polar mineral oil and is hardly eroded in fuel oil and mechanical oil. 5, good resistance to oxygen and ozone. 6, excellent vibration absorption performance, can do damping and buffering. In the mold manufacturing industry, it replaces rubber and springs.7, has good low temperature performance. 8, radiation resistance. Polyurethane is highly resistant to high energy radiation and has satisfactory performance at 10-10 deg radiation dose. 9, with good machining performance

The polyurethane sheet, pu sheet are made by mould cast or centrifuge rotor with high quality polyester or polyether material. It is very good performance of chemic erode resistant, impregnant resistant, ozone resistant, radiation resistant, aging resistant, hydrolyze resistant, and high tensile strength, tear resistant, high impact resistant, high bend strength and low compression set etc. The abrasion resistant is 5 multiple more than pure natural rubber, and the oil resistant is 3-5 multiple more than NBR rubber, and have high elasticity 65% with prominent compression resistant at high temperature. wider revise hardness range of 75-95shore A, very good viscidity with metal material, it is a new macromolecule material with fast evolutive now. Apply to military, mine, oil field, chemical, printing, punch, paper making, shoe making, spin, auto industrial etc.

Specifications:
material: virgin polyether or polyester
color: clear yellow, black, red, brown, white, blue, green etc.
surface: smooth/smooth
tensile strength: 25-50Mpa
elasticity impact: >25%
hardness: 80-95shore A
elongation: 400%-600%
density: 1.15-1.25g/cm3
tear strength: 35-155KN/m
akron abrasion loss:

Calcined coke is the product of petroleum coke calcined at 1300 degrees without contact with oxygen. The purpose of calcination is to remove volatiles and moisture from raw materials. The calcined coke is mainly used in the pre-baked anode and cathode for electrolytic aluminum, the carburizer and graphite electrode for the production of metallurgical iron and steel industry, and the carbon electrode for industrial silicon, yellow phosphorus and iron alloy.
graphite� powder is mainly used in fire retardant, sealing materials and other aspects
Our graphite: natural earthy graphite, natural graphite flakes, expandable graphite Characteristic: High purity, high conductive,high carbon low Sulfur, high expandable times.Application: Casting, battery, lubricate, seal, steel, refractory material, conductivite material so on.

Calcined coke is the product of petroleum coke calcined at 1300 degrees without contact with oxygen. The purpose of calcination is to remove volatiles and moisture from raw materials. The calcined coke is mainly used in the pre-baked anode and cathode for electrolytic aluminum, the carburizer and graphite electrode for the production of metallurgical iron and steel industry, and the carbon electrode for industrial silicon, yellow phosphorus and iron alloy.
graphite� powder is mainly used in fire retardant, sealing materials and other aspects
Our graphite: natural earthy graphite, natural graphite flakes, expandable graphite Characteristic: High purity, high conductive,high carbon low Sulfur, high expandable times.Application: Casting, battery, lubricate, seal, steel, refractory material, conductivite material so on.

Rubber molding is a manufacturing process that involves injecting or pressing rubber into a mold and curing it to hold the desired shape. It is used to produce a variety of parts and products, such as O-rings, gaskets and seals, for a variety of industries and applications.
PRODUCT DESCRIPTION

What are molded rubber products?
Rubber molding is a manufacturing process that involves injecting or pressing rubber into a mold and curing it to hold the desired shape. It is used to produce a variety of parts and products, such as O-rings, gaskets and seals, for a variety of industries and applications.

The variety of molded rubber products is so great that it is almost impossible to list all the applications for these products on a global scale. Used in everything from agricultural equipment to jetliners, the oil and gas industry, railroads, trucking and countless other industries, it's safe to say that rubber products are everywhere - and they play a huge role in everyday life around the world.

Specification of Custom Rubber Products Molded Rubber Parts
The material is silicone rubber.

Color: as your needs. Black, white, blue, green, brown, red, gray, etc.

Sizes: as your drawing or sample.

Our Products Details:
Custom Rubber Products Molded Rubber Parts

Rubber Grommet

Rubber grommets are essential components used in wiring systems. They are designed to allow wires to pass through holes while protecting them from damage caused by sharp edges. Additionally, they provide dust and water resistance, making them versatile for use in various industries, including electronics, appliances, machinery, sports equipment, furniture, and lighting.

A wide range of rubber materials is utilized to manufacture these grommets, with common options including nitrile rubber, natural rubber, neoprene, silicone, and fluororubber. Typically, the hardness of these grommets ranges from 30 to 60 Shore A. Customers can also customize rubber grommets with different materials to meet the specific requirements of their products.

General shapes of Rubber Grommets

Depending on the application range of Rubber Grommets and the shapes of the holes on the board, the commonly used Rubber Grommets are as follows:

Round Grommets
Oval Grommets
Square Grommets
Blind Hole Grommets
Special Shape Grommets

Applications and Benefits
Rubber grommets are commonly utilized in:

Electronics: Protecting wiring in devices and appliances.

Automotive: Shielding wires and components from sharp edges and environmental factors.

Machinery: Ensuring durability and safety in mechanical systems.

Furniture and Lighting: Enhancing aesthetics while providing functional protection.

The primary benefits of using rubber grommets include:

Protection: They prevent wires from being damaged by sharp edges of the holes.

Dustproof and Waterproof: Grommets help keep contaminants out, which is crucial in many applications.

Aesthetic Appeal: They provide a clean and finished look to installations.

Sanshi Rubber is a manufacturer of square rubber gaskets, we produce a wide range of square rubber gaskets and square rubber gaskets seals, from simple washers and gaskets to specialized seals. We use various production methods and state-of-the-art machinery to provide high-quality solutions.

We can help design and cut any size or shape based on your measurements, drawings, or existing samples.


Materials for square rubber gaskets
We have extensive experience in supplying thousands of different gasket materials. Conventional materials include

Neoprene�® - Natural rubber - SBR - Nitrile rubber - EPDM - Butyl rubber - Silicone rubber - Latex - FKM Viton�® - Insert rubber - Shot blasted rubber - FDA film - Polyurethane - Rubber bonded cork Plastazote�® - Expanded Polyethylene - Sponge Rubber - Expanded Neoprene - Expanded EPDM - Flame Retardant Neoprene - Metal Detectable Grades - Reticulated foam - PTFE - Industrial felts - Expanded graphite - Klinger - Novusâ?¢ - Non-asbestos -Non-asbestos

We can provide advice on material selection if you can provide full application details and the operating environment at the time of inquiry.

Sanshi Rubber offers custom parts that can be molded, extruded, or cut into any special shape you need. We can supply products to your design or sample to ensure consistent quality, great prices and on-time delivery. Contact us for a quote!