Description :
SN-501 is a one-part high performance 100% RTV Neutral Silicone Sealant. It is suitable for a wide range of sealing and glazing applications where durability and reliability is required. It has superior resistant to UV-Radiation, vibration and weathering. etc.It adheres to a variety of non-porous substrates such as glass, ceramic, tiles, aluminum, fiberglass, no-oily wood, polycarbonate, etc.
Definition
Silicones are synthetic polymer containing alternate silicone and oxygen atoms as its backbone. Silicones are made from silicon (a metal obtained from silica sand) and methyl chloride (an organic compound) in a process known as the direct process. The Silicone sealant in the uncured state normally looks like a thick paste or cream. After curing the paste turns into an impressive rubber.
Applications
Silicone sealant are used as a form-in-place gaskets for engine & transmission applications, sealing of exterior joints, aquarium joints bonding, sealing of bath tubs, construction and glazing application, electrical potting & encapsulation, mould making, etc.
Curing Mechanism
RTV silicone systems use humidity or moisture in the air during curing and cannot be accelerated using heat (excessive heat in the curing process can be detrimental). Small amounts of by-product are also produced. The cure process will only take place if the material is open to the atmosphere and curing will be adversely affected if access to humidity is removed prior to the completion of the cure process.
Provided product types
One component RTV silicone sealant
Two component RTV silicone sealant
Packing, storing, shelf life and transport
Available packing sizes vary from 25 g to 25 kg, packed in lacquered coated aluminium tubes, HDPE cartridges and epoxy coated MS drums. Store products at room temperature (20C to 35C). Shelf life can vary from 4 - 12 months. They are safe to transport by road, air and sea.
One component high-quality, flexible joint sealant based on acrylic dispersions. 0dorIess.Easy to use.Use for sealing PVC and aluminum windows. UV and water resistant. %12,5 joint movement capacity. Good adhesion to PVC, aluminum, wood, concrete and many construction materials.
We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
Silicon is a metalloid widely used in aluminum alloys, electronics, solar panels, chemicals (silicones), and steel deoxidation.
Product : Silicon Metal
Form : Lumps / granules / powder
Color : Grey to dark grey metallic
Purity : 95 - 99.9999% (grade dependent)
Melting Point ; ~1414C
Density : ~2.33 g/cm
Hardness : High (brittle)
u SI C is famous for its 2 basic characteristics
1 . Hardness
Its hardness is rank only second to diamond.
2 . Chemical stability
High temperature resistance
Corrosion resistance
u For its basic characteristcs we apply them to:
1 . casting
2 .Metallurgy
3 . Ceramic
4 .Abrasive
5 .Refractory
6 .Electron industry
Beverages
Cosmetics & Pharmaceuticals
Food
Industrial & General
Potential Functions:
Anti Caking Agent
Colourant
Defoamer
Potential Applications:
Cleaning Chemicals Non-Alcoholic Drinks Skin Care
Dairy Personal Care Snack Foods
Health Care Ready Meals Water Treatment
Paints Seasonings
High-performance electrical steel with strong magnetic anisotropy, low core loss, and high magnetic flux density. Mainly used in the manufacture of transformers, large motors, and reactors. Covers CGO and HiB series, complies with GB/T 2521, IEC 60404-8-4, and ASTM A876 standards, exported to 30+ countries (Europe, North America, Southeast Asia, South Korea) with 18+ years of electrical steel export experience.
80% Micro Silicon Powder is a highly reactive pozzolan and gives concrete a denser Microstructure, Lower Permeability & Higher Electrical Resistivity leading to improved durability.
The durability of a reinforced concrete structure can be defined as the capability of the structure to maintain its original functional and structural characteristics during the expected service life in the exposure conditions it was intended for.
Silicon carbide si made from hte mixture of pure silica sand and green petroleum
coke in ultra high power acheson furnace. Electric current is passed through t h e conductor,bringing about a chemical reaction ni which the carbon ni the coke and silicon ni the sand combined ot form SIC and carbon monoxide gas. Silicon carbide si
With annual capacity for 60,000 tons of silicon carbide, we can provide different grade of silicon carbide to meet different clients' requirements, such as 70% SIC, 80% SIC, 85% SIC, 90% SIC, 93% SIC and 98% SIC, etc.We also provide customized size for 90% SIC and 98% SIC, such as 200 mesh and 325 mesh
Silicone Emulsion 60% is used in industrial applications such as in Rubber and plastics as release agents and lubricants, in Food trays and plastic serving dishes as release agents, in Car polishes and household cleaners to improve protection, resistance, gloss and spread ability and in Textile finishing to enhance feel, water repellency and reduce the need for ironing. Silicone Emulsion 60% is also used in Perlite, vermiculite and clay and other building materials to improve water repellency and protect against dampness. Itâ??s used in Printing and papermaking for lubrication and as an antistatic agent. Silicone Emulsion 60% used as a Release agent for industrial rubber tire plastics and casting materials; Rotary offset printing lubricant; Industrial waterproofing agent and release agent; Additives for maintenance products; Polishing agent for floors and furniture; And Leather maintenance products, etc.
Silicone Emulsion 60%
WC Code: 24-005-04
Sales Specification
Appearance: White Liquid
Odour: Characterictic
Solid content (%): 60.00 �± 2.0
pH Value: 8.0 �± 1.0
Density (g/cm3): 0.953 �± 0.02
Soluble in water: Miscible
Silicon Compounds
Medical-grade silicone rubber compounds engineered for thermal-resistant roller manufacturing with exceptional biocompatibility and extreme temperature stability (-60C to +230C).
Materials:
Medical-Grade Silicone
Ideal for food-grade processing rollers, pharmaceutical equipment, and heat-sealing machinery. Non-toxic and hypoallergenic properties combined with UV/ozone resistance.
Silicone Foam Wound Dressing
the silicone dressing is a highly absorbent dressing made from hydrophilic polyurethane foam, ideally designed for heavily exuding wounds. The soft flexible foam absorbs large amount drainage, ensures patients comfort; the top backing film protect wounds against external bacterial. It's a disposable sterile product,it consists of silicone gel and polyurethane foam ,it has high liquid absorptive volume, isolates the wound penetrent liquid from the wound effectively,and reduce the possibility that the wound is infected.The product can form and keep a moist environment,promote wound healing ,and reduce the second damage when changing the dressing.
Information for Use:
1)clean the wound with saline.
2)dry skin around the wound, select the appropriate specification ( crop the product if necessary ). Cover the wound completely.
3)tear the face mask, Stick to the wound.
4)use the second dressing to fix (island).
Applications:
Pressure ulcer
Leg venous ulcer
Diabetic foot ulcer
First and second degree burns
Skin grafts and donor site
Post-operative and traumatic wounds
Advantages:
high absorptive volume of liquid
isolate the wound penetrent liquid from wound, reduce the infection
heal without scab,reduce the scar
promote wound healing
Silicone Foam Wound Dressing
the silicone dressing is a highly absorbent dressing made from hydrophilic polyurethane foam, ideally designed for heavily exuding wounds. The soft flexible foam absorbs large amount drainage, ensures patients comfort; the top backing film protect wounds against external bacterial. It's a disposable sterile product,it consists of silicone gel and polyurethane foam ,it has high liquid absorptive volume, isolates the wound penetrent liquid from the wound effectively,and reduce the possibility that the wound is infected.The product can form and keep a moist environment,promote wound healing ,and reduce the second damage when changing the dressing.
Information for Use:
1)clean the wound with saline.
2)dry skin around the wound, select the appropriate specification ( crop the product if necessary ). Cover the wound completely.
3)tear the face mask, Stick to the wound.
4)use the second dressing to fix (island).
Applications:
Pressure ulcer
Leg venous ulcer
Diabetic foot ulcer
First and second degree burns
Skin grafts and donor site
Post-operative and traumatic wounds
Advantages:
high absorptive volume of liquid
isolate the wound penetrent liquid from wound, reduce the infection
heal without scab,reduce the scar
promote wound healing
22352 Silicon Sealants Suppliers
Short on time? Let Silicon Sealants sellers contact you.
