Polyimide Film is produced by cast method, which has high temperature resistance, resistance to
radiation and excellent dielectric properties. It is applicable to electrical insulating of the class H electric
motor and other electrical equipments, and other use electrical insulating materials.
Material: PVC
Use: Masking
Adhesive Side: Single Sided
Adhesive: Rubber, Butyl rubber and Adhesion Promoting Resins
Adhesive Type: Hot Melt
Feature: Waterproof
Design Printing: No Printing
Place of Origin: Ho Chi Minh, Viet Nam
width: 2'' to 8''
length: 100ft to 800ft
Color: black
thickness: 15mil,20mil,25mil,30mil
Material: PVC
Use: Masking
Adhesive Side: Single Sided
Adhesive: Rubber, Butyl rubber and Adhesion Promoting Resins
Adhesive Type: Hot Melt
Feature: Waterproof
Design Printing: No Printing
Place of Origin: Ho Chi Minh, Viet Nam
width: 2'' to 8''
length: 100ft to 800ft
Color: black
thickness: 15mil,20mil,25mil,30mil
Material: PVC
Use: Masking
Adhesive Side: Single Sided
Adhesive: Rubber, Butyl rubber and Adhesion Promoting Resins
Adhesive Type: Hot Melt
Feature: Waterproof
Design Printing: No Printing
Place of Origin: Ho Chi Minh, Viet Nam
width: 2'' to 8''
length: 100ft to 800ft
Color: black
thickness: 15mil,20mil,25mil,30mil
Product Description
"RT-101 is a light strength fiberglass reinforced biaxially-oriented polyester film tape with a aggressive solventless pressure sensitive hot melt adhesive. Exhibits
high impact strength excellent adhesion to kraft cartons and bundling applications."
Main Application
* Unitizing
* Strapping
* Packaging
* Transport securing
* Bundling and palletzing
Construction
*Backing:25 mic Polyester film*Adhesive:Pressure sensitive hot melt
*Backing Color:Transparent*Reinforcement:Mono-directional glass yarn
Typical Physical Properties
Note: The following technical information and data should be considered representative or typical only, and should not be used for specification purposes. Test before massive using is recommended.
Typical Physical Properties
Total Thickness:0.13 mmASTM D-3652
Adhesion to Steel:75 oz / in20 N / 25mm2.0kg/25mmASTM D-3330
Tensile strength:138 lbs./ in600 N/25mm61kg/25mmASTM D-3759
Elongation at Break:3~5%ASTM D-3759
Service Tem recommended:0 ~70 ( 32 ~158°F)
Storage Conditions
Store behind present stock. Store in a clean, dry place. Temperature of 4~26 (40~80°F) and 40~50% relative humidity are recommended. Rotate your stock.
Brown Economy Grade Water Activated Gummed Kraft sealing tape
Kraft Paper Tape is naturally a more eco-friendly choice in carton sealing. We start with a renewable paper backing, add interwoven fiberglass threads and finish it off with a water-activated, high-performing corn starch adhesive. Best of all, Eco Enclose Kraft Paper Tape will not only out-perform your plastic tape, but it is actually more affordable per carton seal in comparison to your standard plastic tapes. Plastic tape may require several strips over the same seal to provide the same holding power of just one strip of paper tape.
Technical Datas
Adhesive Starch Glue
Backing Whole wood pulp kraft paper
Rubber surface quantitative >=32 gsm
Bursting strength 28 N/CM²
Tensile (lengthways) >=200 N/25mm
Tebsile (horizontal) >=80 N/25mm
Release force >=0.85 KGF
Space between string(horizontal) 1cm ±1mm
Jumbo Roll Size 960mm x 2000m/3000m/4000m
ANTI-SPLASH TAPE USED IN MARINE & OFFSHORE
Anti-Splash tape is constructed of an aluminum or glass cloth laminate coated with a high temperature silicone adhesive.
Anti-Splash tape is enhanced with a fire retardant (self-extinguishing) adhesive layer. At the same time, it is also water resistant. In addition, the maximum working temperature of tape is up to 150 °C.
It is designed to prevent hazardous liquids (oil/fuel) spraying outs or leaking from tubing systems. These liquids can cause extremely dangerous situations like fires, explosions or other dangerous situations.
Anti-Splash tape is widely used to wrap around tubing, hoses, fittings, flanges, and valves in the marine and offshore industry.
Total thickness 9.5 mils
Colour Silver
Max. temperature Up to 150 °C (300 °F)
Pressure 300 psi
Tensile strength 93.2 lbs. per inch (ASTM-882)
Adhesion Above 1000 grams, 25 mm g/f
Adhesion to steel 5.8 lbs. per inch (ASTM-33330)
Aging properties Indefinite shelf life when properly stored
INSTALLATION STEPS
Three steps to install anti-splash tape on the flange.
Steps for installing anti-splash tape on the flange
Three steps to install anti-splash tape at the junction of the two pipes.
Steps for installing anti-splash tape on pipes
This picture shows the different conditions before and after using anti-splash tapes.
Different conditions before and after using anti-splash tapes
PTFE adhesive tape
We selected fine imported fiberglass, wove it as the basic cloth and coat it with PTFE resin, proceed under high temperature condition, the product is called PTFE adhesive tape.
Thickness(mm),width(mm),length(mm),Temperature(ºC)
0.08,10-1200,10-50,-70-260
0.13,10-1200,10-50,-70-260
0.18,10-2000,10-50,-70-260
0.25,10-2000,10-50,-70-260
Pure polytef adhesive tape: made of superior pure PTFE (polytef).
Thickness(mm),width(mm),length (mm),Temperature(ºC)
0.08,10-400,10-50,-70-230
0.13,10-400,10-50,-70-230
0.18,10-400,10-50,-70-230
0.25,10-400,10-50,-70-230
Securitypack is a professional manufacturer of tamper evident label material (total transfer tamper evident printing material;partial transfer tamper evident printing material; non-transfer tamper evident printing material).
We are company located in latvia and we manufacture flax fiber tape. Flax tape is made from a natural product - flax fiber. It is an perfect eco material for log builds embedding between logs and sealing of slits.
Flax tape also can be used for:
· wall, ceiling, roof, and underfloor insulation
· window and door frames insulation
· sound isolation
· upholstered furniture making
· door insulation
· floors under the parquet and laminate
Flax tape is easy to use and is completely safe, ecological material with good air and gas diffusion options, as well as keeps a steady level of humidity. It has a very high thermal insulation capability and soundproofing. The material does not create static electricity and does not conduct electricity. Can be cut to a width of 3 cm to 170 cm. Thickness 6, 8, 10, 15, 20 mm.
Yuanjinghe Low Tack Paper Masking Tape Manufacturer
Yuanjinghe Low Tack Paper Masking tape is made of colored crepe paper coated with a pressure sensitive adhesive, another top coat to release material. The masking paper is high temperature resistant, good resistance to chemical solvents, high adhesion, softness docile and then tear without leaving adhesive residue. Industry known as textured paper pressure sensitive adhesive tape.
The Features of low tack paper masking tape:
? The Masking Tape is made of crepe paper coated with pressure-sensitive adhesive and coating the surfactant.
? The Total Thickness:0.125mm±0.01mm.
? Quick paste,Easy to peel,Shredded easily broken,Easy to write.
The Low Tack Paper Masking Tape Date Sheet:
Material Crepe Paper
Adhesive Rubber
Color White
Thickness 0.125mm
Width 3mm,10mm,18mm,20mm,30mm,35mm,48mm,50mm,100mm...1250mm,1550mm
Length 30M,50M...1500M,1800M
Tack (GB/T 4852-2002) =9#
Holding Tack (GB/T 4851-1998) =2.5
180°Peel Strength Power =6N/25mm
Tensile Strength =28N/cm
Elongation 5-14%
The low tack paper masking tape applications:
? Room decoration paint covering, light dressing material, fixed light objects, remove cotton velvet, packaging.
? Automotive paint covering, paint coating masking and more.
? High temperature paint, paint and electronic industries.
Adhesive Tape Manufacturer adhesive tape packaging
Yuanjinghe Adhesive Tape co.,Ltd is specialized in manufacturing low tack paper masking tape,our engineers to make the tape from 2008. We supply the customized services,our daily output can be up to 100,000 square meters,all of the low tack paper masking tapes are satisfy to the requires of Reach,RoHS and Halogen free.The low tack paper masking tape is not only suitable for domestic market,but also the European,American,African,Asian and the Middle East markets.
There are four reasons to choose us:
1.High quality adhesive tape with competitive prices.
2.Shorted delivery time:5-15 days.Urgent and Huge orders are welcome.
3.Free Samples.
4.Record and Maintained secrecy about the information of customers’ samples or orders.
Yuanjinghe High Temperature Electrical Tape Manufacturer
Yuanjinghe High Temperature Electrical Tape is made of Polyvinyl chloride film coated with pressure sensitive rubber adhesive,has been called electrical insulation tape or insulation tape.
For preventing leakage,the high temperature electrical tape plays the role of insulation tape. It has good dielectric strength, flame retardant, voltage resistance, weather resistance and other features for connecting wires, electrical insulation protection and other features,suitable for wire wound,transformers, motors, capacitors, voltage regulators and other types of motors, electronic components insulation fixing.
The High Temperature Electrical Tape Date Sheet:
Material PVC
Adhesive Rubber
Color Black
Thickness 0.12mm,0.13mm,0.15mm,0.18mm,0.2mm
Width 3mm,10mm,18mm,20mm,30mm,35mm,48mm,50mm,100mm...1250mm
Length 30M
Tensile Strength =45N/25mm
Elongation =150%
180°Peel Strength Power =3.5N/25mm
Dielectric Breakdown =3KV/min
Heat Resistant 80?
Cold Resistant =-20?
Holding Tack (1kg/25mm) =30min
Insulation Resistant
=1*1012 ?.cm
The high temperature electrical tape applicable to various parts of the insulation resistance. Such as winding wire connectors, repair damaged insulation, transformers, motors, capacitors, voltage regulators and other types of motors, electronic components insulation protection. It can also be used for industrial processes tied, fixed, overlap, repair, seal and protect.
Adhesive Tape Manufacturer adhesive tape packaging
Yuanjinghe Adhesive Tape co.,Ltd is specialized in manufacturing high temperature electrical tape,our engineers to make the tape from 2008. We supply the customized services,our daily output can be up to 100,000 square meters,all of the high temperature electrical tapes are satisfy to the requires of Reach,RoHS and Halogen free.The high temperature electrical tape is not only suitable for domestic market,but also the European,American,African,Asian and the Middle East markets.
There are four reasons to choose us:
1.High quality adhesive tape with competitive prices.
2.Shorted delivery time:5-15 days.Urgent and Huge orders are welcome.
3.Free Samples.
4.Record and Maintained secrecy about the information of customers’ samples or orders.
Lead free solder paste, soldering paste, tin paste details:
Solder paste storage
1.Paste save allowable temperature 1-10 , the shelf life of six months (counting from the date of manufacture).
2. Prior to use, the solder paste previously removed from the refrigerator at least 4 hours at room temperature, which is to return to work in order to make the paste temperature, but also to prevent moisture condensation on the surface of the solder paste
The use of the environment
Paste the best use of the environment: temperaturehumidity of 40 to 70%.
Solde paste mixing
1.To make the paste is completely mixed, after warmed please stir paste.
2. Mixing machine generally 1 to 3 minutes, stirring artificial usually 3 to 5 minutes (the longer the paste storage time, stirring longer)
Oubel new low price lead free solder paste, smt soldering paste applicable objects:
Laptop , computer, mobile phone, home appliances for led, smt, smd, pcb industry ect
Standard packaging:500g per jar, 5kg or 10kg per carton weight of each foam box (with ice bag)
