Dishwasher salt is a particular grade of granulated, crystalline sodium chloride intended for regenerating the water softener circuit of household or industrial dishwashers. Analogous to water softener salt, dishwasher salt regenerates ion exchange resins, expelling the therein trapped calcium and magnesium ions that characterize hard water. Dishwater salt granules are larger than those of table salt. The granule size ensures that the salt dissolves slowly, and that fine particles do not block the softener unit.
The primary purpose of most washers is to evenly distribute the load of the threaded fastener with which they are used. The washers we supply are the following: (1) BELLEVILLE WASHERS (2) CRINKLE WASHERS (3) DISC SPRINGS (4) FEMALE SPHERICAL SEAT WASHERS (5) MALE SPHERICAL SPRING WASHERS (6) IMPERIAL RECTANGULAR PROFILE SPRING WASHERS (7) METRIC RECTANGULAR PROFILE SPRING WASHERS (8) SEALING WASHERS (9) SPLIT SPRING WASHERS (10) SPRING WASHERS (11) SQUARE PROFILE SPRING WASHERS (12) SQUARE TAPPER WASHER FOR U SECTIONS (13) SHOULDER WASHERS (14) EXTERNAL LOCKING WASHERS
APPLICATIONS
The primary purpose of most washers isto evenly distribute the load of the threaded fastener with which they are used. Threaded fasteners stress the material in which they are driven. Driving a screw into wood, for example, may cause the wood to crack around the surface. Most notably, washersprotect the surface from damage during installation. They distribute the pressure and prevent the fastener from moving or corroding
Product Details:
Minimum Order Quantity - 100 Piece
Surface Finish - Electroplated
Material - Aluminium, Brass, Carbon Steel, Iron
Color- Black, Sliver
We supply as well as manufacturer a wide range of round washers.Our clients can avail from us a quality range of Alum Flat Round Washers. These are manufactured by our skilled and talented engineers in compliance with defined quality standards. We use best quality material in the production process to manufacture quality approved range of Alum Flat Round Washers. These are available in various sizes and dimensions to suit the diverse requirements of our clients.
Features:
Robust construction
Dimensional accuracy
Corrosion resistance
Longer service life
High tensile and Stainless Steel Fasteners as per National, International Standard & Customer Drawings, We are manufacturer of Washers, Spring Lock Washers, Flat / Plain Washers, Cup Washers.
Plain Washers (Steel) M6 to 64mm (1/4" to 2.5")
Steel Heavy Washers M6 to 64mm (1/4" to 2.5")
Hardened & Tempered M6 to 64mm (1/4" to 2.5")
Steel Washers
Spring Lock washers
Flat / Plain washers
Cup washers
Drawings / Specifications We can manufacture any type of typical Fasteners as per your drawing and specifications
FINISH : The above products are available in finish like Phosphate, Black Oxide, Galvanised, Hot Dip Galvanised, Cadmium Plating. Teflon (PTFE), Powder & many more as per Customer Requirements.
We can also supply fasteners according to customers drawings and specifications.
6150G is a non-flat washer with a conical shape which gives them their
specific spring characteristic. They are designed to be loaded in the axial
direction only and are typically used to apply a preload to a bolted joint
and to provide resiliency and flexibility under vibration conditions.
6150G is applicable for Brakes, Bearing pre-load, Overload device,
Mechanical actuator, Industrial furnace, Mould, Clutch in Metallurgy,
Mechanical vehicle, Electricity, Construction industry.
1075G Washers
1075G washers are Disc Springs with a Trapezoidal Cross Section on both
sides for gripping.
1075G washers are ready to fit washers for sustaining a preload and
avoiding loosening. As the bolts are tightened the serrations bite into the
mating faces and preventing the bolt from loosening due to vibration.
Also the disc shape holds the necessary pre-load.
The diameters for 1075G Washers are matched to bolt dimensions. The outer diameter of the washer is
matched to the head diameter of the screw. This allows the use of screws and bolts including recessed heads,
except countersunk screws.
All products listed manufactured to AIGI ENVIRONMENTAL INC. standard materials and finishes, please consult with
AIGI ENVIRONMENTAL INC. on any special materials and or finishes.
The advanced Nickel Plated Technology gives AIGI NIF Disc Springs a high wear and corrosion
resistant surface.
The special coating protects the spring metal surfaces from scratching and provides protection
from acidic and alkaline corrosion during working application. The highly protected surface can
even withstand prolonged exposure to halogens.
This tremendous corrosion resistance dramatically extends the disc spring life and greatly
enhances its preload ability.
Remarks: NIF H-13 disc spring is compatible with bolts at 8.8grade / 80D / SAE8.
Conventional H-13 disc springs are available too.
Please consult with AIGI Environmental Inc. for all your standard and non-standard requiremnts.
