1. Rubber tensile testing machine
The tensile, tear, peel, compression, bending and shear tests of rubber products were carried out, measure the performance parameters of the product, such as tensile strength, elongation, elastic modulus and yield strength and son on.
1.1 The testing machine has overload protection device. When the applied force exceeds 2%-10% of the maximum capacity of the testing machine, the overload protection device ensures the automatic shutdown of the testing machine.
1.2 The test machine has limit position protection device. When the beam moves to the upper and lower limit positions, the limit device should act immediately to stop the movement automatically.
1.3 During the test, when the sample breaks, the test function automatically stops, the device automatically stops or according to set mode to returns, then stop.
The machine press, dewater, flat and cut natural latex coagulum through five rollers, which is a equipment for making smoke rubber.
Component:
1. motor belt drive unit 2. Machine frame 3.rolling device 4. spray system 5. wheel device
Working Principle:
motor reduce a pair of gear (20:52) through one grade V-belt drive, drive-gear transfers drive to forth pair of lower roller, each roller work together after through gear drive.
The mass material by elevator, conical screw feeding machine, extruder, cutting, cooling, screening and terminal silo produce processing full automation .After the material were refined , trough feeding it is forced to enter the single screw extruder . The core of the screw is connect with water, and the screw is completely dispersed without excessive friction heat.Excellent dispersion effect, the current of main machine is small, energy saving and environmental protection.The precise temperature control of the rubber granulator ensures the technology of low temperature granulation and the special isolation agent recovery system, which can effectively solve the dust problem in production. Moreover, the added isolation agent will not cause too much waste.The recovered isolator can be reused.
The biggest technical characteristic of the rubber granulator is that it adopts the cold processing , which has the characteristics of low processing temperature,
Continuous operating mixing machine
Sandychen:
Function
Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , we have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow:
It is efficient as it works long;
It does not result in power wasting as there is no idle-running;
It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine;
It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer.
it takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically.
It is a new type of mixing machine which is highly recommended in rubber product processing.
Function
Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , we have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow:
It is efficient as it works long;
It does not result in power wasting as there is no idle-running;
It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine;
It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer.
It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically.
It is a new type of mixing machine which is highly recommended in rubber product processing.
1130 Rubber Machinery Suppliers
Short on time? Let Rubber Machinery sellers contact you.
Function
Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow:
It is efficient as it works long;
It does not result in power wasting as there is no idle-running;
It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine;
It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer.
It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically.
It is a new type of mixing machine which is highly recommended in rubber product processing.
Function
Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow:
It is efficient as it works long;
It does not result in power wasting as there is no idle-running;
It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine;
It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer.
It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically.
It is a new type of mixing machine which is highly recommended in rubber product processing.
Function
Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow:
It is efficient as it works long;
It does not result in power wasting as there is no idle-running;
It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine;
It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer.
It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically.
It is a new type of mixing machine which is highly recommended in rubber product processing.
Function
Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow:
It is efficient as it works long;
It does not result in power wasting as there is no idle-running;
It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine;
It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer.
It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically.
It is a new type of mixing machine which is highly recommended in rubber product processing.
Function
Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow:
It is efficient as it works long;
It does not result in power wasting as there is no idle-running;
It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine;
It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer.
It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically.
It is a new type of mixing machine which is highly recommended in rubber product processing.
Function
Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow:
It is efficient as it works long;
It does not result in power wasting as there is no idle-running;
It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine;
It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer.
It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically.
It is a new type of mixing machine which is highly recommended in rubber product processing.
Function
Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow:
It is efficient as it works long;
It does not result in power wasting as there is no idle-running;
It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine;
It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer.
It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically.
It is a new type of mixing machine which is highly recommended in rubber product processing.
Function
Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow:
It is efficient as it works long;
It does not result in power wasting as there is no idle-running;
It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine;
It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer.
It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically.
It is a new type of mixing machine which is highly recommended in rubber product processing.
Function
Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow:
It is efficient as it works long;
It does not result in power wasting as there is no idle-running.
It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine;
It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer.
It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically.
It is a new type of mixing machine which is highly recommended in rubber product processing.
Function
Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow:
It is efficient as it works long;
It does not result in power wasting as there is no idle-running;
It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine;
It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer.
It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically.
It is a new type of mixing machine which is highly recommended in rubber product processing.
Banbury Rubber Mixer Machine
Function
Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow:
It is efficient as it works long;
It does not result in power wasting as there is no idle-running;
It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine;
It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer.
It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically.
It is a new type of mixing machine which is highly recommended in rubber product processing.
Function
Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow:
It is efficient as it works long;
It does not result in power wasting as there is no idle-running.
It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine;
It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer.
It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically.
It is a new type of mixing machine which is highly recommended in rubber product processing.
Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow:
It is efficient as it works long;
It does not result in power wasting as there is no idle-running;
It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine;
It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer.
It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically.
It is a new type of mixing machine which is highly recommended in rubber product processing.
Function
Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow:
It is efficient as it works long.
It does not result in power wasting as there is no idle-running;
It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine;
It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer.
It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically.
It is a new type of mixing machine which is highly recommended in rubber product processing.
Function
Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow:
It is efficient as it works long;
It does not result in power wasting as there is no idle-running;
It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine;
It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer.
It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically.
It is a new type of mixing machine which is highly recommended in rubber product processing.
1130 Rubber Machinery Suppliers
Short on time? Let Rubber Machinery sellers contact you.
