Find Verified Roofing Ceiling Suppliers, Manufacturers and Wholesalers

Advantage of single-layer aluminium panels:
1.Hydrochloric acid resistance;nitric acid resistance,colour changes<=NBS
2.Resistance to natural weathering,no colour changes<=5NBS
3.Corrosion resistant,anti-humidity,anti-mist for above 4000 hours(abouve grade2 of GB1740)
4.Wear-resistant,pencil hardness>=1H
5.Earthquake proof
6.Self cleaning effect,natural-cleaning after the rain
7.Resistant to cleaning agent,no changes after soaking in for 72 hours
8.Different shape and deluxe designs,visually pleasing linear designs
9.Durable and recyclable
10.Fireproof
11.Green and environmental-friendly
12.Light weight,minimize load on building structures
13.Can be installed horizontally and vertically depending on requirement.


Standard export package

28x38x0.55mm

10pcs/bundle

Steel siding
A. Normal type
2000mm(length) x 280mm(effective width) x 20pcs per box
Net weight : 67.8kg/box

3500mm x 280mm(effective width) x 12pcs per box
Net weight : 71.6kg/box


B. Rp type steel siding
2000mm x 360mm(effective width) x 18pcs per box
Net weight : 64.8kg/box


3500mm x 360mm(effective width) x 10pcs per box
Net weight : 63.0kg/box



Normal type : 3600mm x 370mm x 100mm
2100mm x 370mm x 130mm
Rp type : 3600mm x 470, , x 150mm
2100mm x 470mm x 240mm

E.P.S. Sandwich panel
- surface material : galvanized & pre-painted steel sheets
- core material : 18~20kg/m3(cbm)
- surface steel thickness : 0.5~0.8 mm
- effective width : 1, 000mm
- panel thickness : 50mm or 75mm or 100mm
- function : temperature keeping, hot & sound insulation insulation, fire resistant.


Exporting standard packing

https://www.wuxingmachine.com/productstags/drywall-manufacturing-equipment.html

Drywall Manufacturing Equipment
Gypsum can be a difficult material to work with due to its variability, tendency to harden into a cement-like form, and its abrasive nature. Therefore, choosing a heavy-duty handling solution designed for the unique characteristics of the gypsum sample to be treated will provide the best results.
Wuxing has always been committed to providing the highest quality custom plaster equipment and process solutions.

Gypsum board manufacturing process
The manufacturing process of gypsum board can be divided into the following six steps:

Raw material handling: All raw materials including gypsum powder, water and other additives enter the mixer through the automatic metering system and conveying system. After mixing, the gypsum slurry produced by the mixer is evenly spread on the surface of the continuously moving base paper.
Stirring: With constant movement and vibration, the gypsum slurry gradually spreads and is evenly spread on the surface of the moving base paper. Then it enters the forming machine and is compounded with tissue paper.
Molding: Through extrusion molding, the gypsum slurry is sealed by the top paper and bottom paper. This results in a pulp continuous drywall. The wet gypsum board is conveyed by the shaping belt, and gradually takes shape after the board is shaped, naturally condensed, and automatically cut. After the wet boards are arranged by the program-controlled system, they pass through the 1# horizontal conveyor and plate turner, and then quickly enter the dryer through the distribution bridge.
Drying: Under strict control of the temperature zone of the dryer, use hot air at different temperatures to dry the wet board. Modified starch will stick to the paper. The dry drywall is then removed from the dryer.
Cutting and edge sealing: Fold the gypsum boards over again (face inward), cut them into finished products of a certain size, and seal the edges to meet customer requirements.
Stacking: Finally, it comes to automatic stacking machines for stacking. After stacking, it can be transported to the warehouse by forklift.