Description:
Main features:
Originally from komatsu technology, high reliability and productivity
Chinese engine, powerful and reliable
Torque converter and counter-shaft transmission gearbox are separated independently, higher reliability and easier maintenance
Driving axle in meritor technology
Fully hydraulic steering system, power shift transmission, easy to operate
Comfortable operation environment, spacious cabin, grammer seat,
Various attachment are available, such as log clamp, pipe clamp, rock bucket, loose bucket etc.
Description:
Main features:
--originally from komatsu technology, high reliability and productivity
--chinese engine, powerful and reliable
--torque converter and counter-shaft transmission gearbox are separated independently, higher reliability and easier maintenance
--driving axle in meritor technology
--fully hydraulic steering system, power shift transmission, easy to operate
--comfortable operation environment, spacious cabin, grammer seat,
--various attachment are available, such as log clamp, pipe clamp, rock bucket, loose bucket etc.
Description:
1. Chinese weichal engine is adopted, high horsepower, high efficiency and low consumption.
2. Single stage four units hydraulic converter, planet type force assist gearbox, automatically torque moment output.
3. The steering system adopts full hydraulic flowing magnifying mechanism, manipulating lightly and flexibly, small turning radius, steady performance.
4. Double-pump combined, high efficiency and energy conversation, high performance of motive ability.
5. Four wheels double tubes clamp-disk brake, gas storage container rear installed.
6. Front and gear chassis are box-type structure, perfect intensity.
7. Adopting modulization design, excellent optimization and combination of units, enforce the life of the transmission system, more reasonable matching of the machine.
8. Integrated control panel, streamline design, equipped with new type electronic instruments, monitor the operation condition of the machine promptly, humanization control layout, box type decoration.
9. Sound and heat insulation, wide view , to seal up good, protecting cover, do manual work exquisite.
10. Standard heating and ventilation equipment, air conditioner optional. All specialized operation devices should be selected out and configured with.
Technical Specifications :
Overall Dimension M.M
Rolling Width 1800
Height With Roof 2760
Over all Length 4750
Diameter of Front Roll 1150
Diameter of Front Roll(2Nos.) (Each) 500
Diameter of Rear Roll 1450
Width of Rear Roll (2 Nos) (Each) 500
Weights :
Standard Weight 8 tonnes ± 5%
With stand ballast 10 tones ± 5%
Engine :
Perkins (P4) or Simpson(S4)
No of Cylinders 4
B.H.P 35.5 at 1400 R.P.M
Consumption of Fuel Oil :
At Rated Power output 0.22 Liters / BHP/Hr.
Gear :
Hindustan - 50.
Specifications & Salient Features :
Body : Body & chassis of road roller is made from the best quality tested steel plates and MS.
Gear box and differential (transmission assembly): Heavy duty suitable gear box and differential assembly with gears made out of special alloy steel is installed.
Steering system Best performing easy and simple adjustable steering system is provided.
Rear axle and final drive : a full length through-out rear axle is fitted in two extra heavy duty spherical roller bearings housed in steel cast housing fixed to main of roller which ensures smooth and stress free running.
Brake system :A specially designed most powerful, reliable & dependable foot operated brake system is provided.
Dash board :Attractively designed meter box with locking arrangement for safety purpose is fitted with oil meter, water temperature meter, hour meter, battery charging meter, starter switch, head light switch, horn button etc. for easy access from driver's seat.
Scrapers :adjustable and reversible scrapers are fitted covering full width of front & rear rolls.
Starting system :a 12 volt (25 plates) battery device is provided for starting purpose.
Tool kit :a tool kit containing suitable size spanners, Grease gun etc is provided with rollers.
Lubrication :all bearings are arranged for lubrication. Grease nipples, oiling holes provided at appropriate places for lubrication purpose.
Rolls : rolls are fabricated out of tested ms steel plates, electrically welded with best quality welding electrodes.
Optional accessories :optional accessories such as lights, reflectors, clarifier, water sprinkler etc. May be provided at an extra cost.
Detailed Product Description
0.4wheel loader
1) CE or EPA;
2) Engine: Xinchai, Changchai; Weichai
3) Rated loading: from 1T to 5T
4) Bucket capacity
Wheel loader:
1. Using direct injection diesel engine as power, with easy startup and low oil consumption
2. Using special drive axle, with strong ability to overcome obstacle
3. Chassis uses hinged structure, with small turning radius and flexible turning, which applies to the operation in narrow space
4. This machine uses hydraulic operation, with simple structure, convenient operation, good performance and reliable quality
5. Widely applying to the construcction of agricultural engineering and small and medium building such as road, coal mine, brickyard, urban construction, kiln factory, stone material factory, prefabricated cement parts factory, etc.
4.0 Overall Dimensions
(1) Overall Length (Bucket on ground position): 4480mm
(2) Overall Height
(a) Ground to Cab Top: 2200mm
(b) Ground to exhaust pipe: It is below from the top of cabin
(3) Overall Width: 1400mm
5.0 Operating Specifications
(1) Drive Means: Rear-wheel drive
(2) Min Turning Radius: 3000mm
(3) Driving System: mechanical
(4) Dumping Height: 2300mm
(5) Dumping Reach at max height: 900mm
(6) Min the ground distance: 220mm
(7) Time of raise: 4.5sec.
(8) Hydraulic cycle time: 9second.
6.0 Brake System
(1) Service Brake: Mechanical brake
(2) Parking Brake: Hand operated.
4.0 Overall Dimentions:
(1) Overall Length (Bucket on ground position): 4480mm
(2) Overall Height
(a) Ground to Cab Top: 2200mm
(b) Ground to exhaust pipe: It is below from the top of cabin
(c) Dumping Height: 2300mm
(3) Overall Width: 1400mm
5.0 Operating Specifications
(1) Drive Means: Two-wheel drive
(2) Min Turning Radius: 3000mm
(3) Driving System: mechanical
(4) Dumping Reach at max height: 900mm
(5) Min Base to the ground: 220mm
(6) Time of raise: 4.5sec.
(7) Hydraulic cycle time: 8.5sec.
6.0 Brake System
(1) Service Brake: mechanical brake
(2) Parking Brake: Hand operated
4.0 Overall Dimensions
(1) Overall Length (Bucket on ground position): 4700mm
(2) Overall Height
(a) Ground to Cab Top: 2350mm
(b) Ground to exhaust pipe: It is below from the top of cabin
(3) Overall Width: 1600mm
5.0 Operating Specifications:
(1) Drive Means: Four-wheel drive
(2) Min Turning Radius: 4600mm
(3) Driving System: mechanical
(4) Dumping Reach at max height: 750mm
(5) Min the ground distance: 240mm
(6) Time of raise: 4sec.
(7) Hydraulic cycle time: 9sec.
6.0 Brake System
(1) Service Brake: Four Wheel Hydraulic spread-shoed brake
(2) Parking Brake: Hand operated
Main Technical specifications:
Description Specifications Unit
Rated power 175 kw/h
Overall dimension L, W, H 9000, 2990, 3650 mm
Max. lifting height Forks at level 3450 mm
Take back forks 3750
Operating weight 30000 kg
Max. Limited Load 25000 kg
Bucket capacity 2.7 m3
Dimensions of fork L, W, H 1400, 250, 110 mm
Distance of fork 1350 mm
Rated loading capacity 25000 kg
Turning angle 35
Turning radius 7735 mm
Wheel base 3700 mm
Tread 2300 mm
Min. Ground clearance 430 mm
Unloading angle 18
Haul location height Ground clearance of material 300 mm
Fuel tank capacity 380 L
Hydraulic fuel tank capacity 380 L
Specification of tyre Front wheel Advance¡± high-load three stars 26.5 steel wire tires(tire load more than 60 tons)
Rear wheel Advance¡± 26.5 strengthening tires.
Packing in container with disassembles some parts or by RO-RO ship.
Detailed Product Description
Jining Yadong Construction Machinery Co., Ltd. was established in May 1999 with a registered capital of one million Yuan. And it is a joint stock company which specialized in the business of construction machinery, parts manufacture, sales, aftersales service, technical service, and etc. The company has administrative management dept, human resources dept., finance dept., technical service dept., storage and distribution center, Gansu Branch, Inner Mongolia Branch, as well as Import & Export Branch. And now the company has a staff of 56 persons, among which, 26 has college degree, and 8 has senior technical title.Jining Yadong Construction Machinery Co., Ltd specilizes in KOMASTU ,SHANTUI bulldozer excavator whole and serious parts.The parts are new and original .We could delirey parts quickly.
