Find Verified Raw Material For Wires Cables Suppliers, Manufacturers and Wholesalers

Series - 71, ,80, 90, 92

Length - 4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 25mm, 30mm, 35mm, 40mm

Crown Width - 9mm, 12.8mm, 5.8mm, 8.5mm

Flat wire staples are available in quantities of
5000 staples per Box, 20 Boxes per Carton
OR
10,000 staples per Box, 10 Boxes per Carton

* Designed with a rust-resistant galvanized coating
* Suitable for indoor upholstery and re-upholstery applications
* Offer strong holding capabilities across multiple materials
* Commonly used for furniture, fabrics, blinds, pelmets, insulation, lining, and roofing felt

These staples provide reliable fastening performance for a wide range of indoor projects.

Low Carbon Steel Wire Rod & Drawn Wire - SAE 1008 / SAE 1010
High quality Low Carbon Steel Grade Wire (As rolled Wire Rods) are widely used across industries for its excellent cold forming, welding and drawing capabilities. These wires are delivered in excellent logistic and packaging condition to our customers.

Wire Rod Size in 5.5mm, 6mm, 6.5mm, 8mm, 10mm, 12mm

Drawn Wire Sizes from 1mm to 5mm

Key Characteristics
Wire rod for drawing and excellent surface finish
Suitable for chemical pickling and mechanical descaling
Reach diameter reductions lower than one millimeter
Silicon content controlled to ensure the best hot zinc plating

Industrial Applications
Our wire rods are highly sought after for re-drawing into wire and manufacturing of steel products across various industries such as:
General hardware & High Speed manufacturing (Common Nails, Coil Nails, Screws, Staples, Chains, Mesh)
Construction for binding reinforcement
Agricultural & Fencing, Barbed Wire, Field Fencing, Vineyard)
Automotive seat frames
Consumer Goods (Baskets, Shopping Carts, Retail Displays)

Grades & Standards
Worldwide grades which resemble our product:
SAE1008, SAE1010, AISI 1010, C7D (WNr 1.0313), C10D (WNr 1.0310), Q195, Q235, 08F, 10#, 15#, C1008, C1010 ,SWRM10 or SWRM10K, KWRM10, SM10C, SANS 1431 Grade 230

Worldwide Standards similar to our grades:
ASTM A510M, ASTM A853, EN10016-2, EN10218-2, GB/T 343, GB/T 699,
GB/T 4354, JIS G 3532, JIS G 3505, ISO 16120-2

Depending on diameter, Coil Packaging available from 500 - 2500 kilogram coils

Low Carbon Steel Wire Rod & Drawn Wire - SAE 1008 / SAE 1010
High quality Low Carbon Steel Grade Wire (As rolled Wire Rods) are widely used across industries for its excellent cold forming, welding and drawing capabilities. These wires are delivered in excellent logistic and packaging condition to our customers.

Wire Rod Size in 5.5mm, 6mm, 6.5mm, 8mm, 10mm, 12mm

Drawn Wire Sizes from 1mm to 5mm

Key Characteristics
Wire rod for drawing and excellent surface finish
Suitable for chemical pickling and mechanical descaling
Reach diameter reductions lower than one millimeter
Silicon content controlled to ensure the best hot zinc plating

Industrial Applications
Our wire rods are highly sought after for re-drawing into wire and manufacturing of steel products across various industries such as:
General hardware & High Speed manufacturing (Common Nails, Coil Nails, Screws, Staples, Chains, Mesh)
Construction for binding reinforcement
Agricultural & Fencing, Barbed Wire, Field Fencing, Vineyard)
Automotive seat frames
Consumer Goods (Baskets, Shopping Carts, Retail Displays)

Grades & Standards
Worldwide grades which resemble our product:
SAE1008, SAE1010, AISI 1010, C7D (WNr 1.0313), C10D (WNr 1.0310), Q195, Q235, 08F, 10#, 15#, C1008, C1010 ,SWRM10 or SWRM10K, KWRM10, SM10C, SANS 1431 Grade 230

Worldwide Standards similar to our grades:
ASTM A510M, ASTM A853, EN10016-2, EN10218-2, GB/T 343, GB/T 699,
GB/T 4354, JIS G 3532, JIS G 3505, ISO 16120-2

Depending on diameter, Coil Packaging available from 500 - 2500 kilogram coils

Engineered for high-speed pneumatic nailers (Bostitch, Max, Paslode, BeA, Haubold) used in wooden pallet assembly, roofing, siding, fencing, and timber framing construction.

Wire Angle: 15�° - 16�° Wire Collated
Diameter Range: 2.1 mm to 3.8 mm
Length Range: 25 mm to 100 mm

Shank Options: Screw Shank (Helical): Maximum holding power in softwood.
Ring Shank (Annular Thread): High pull-out force, required for cladding and decking.
Smooth Shank: High-speed assembly applications.

Finishes: Bright (Indoor/furniture), Electro-Galvanized (Pallets/packaging), Stainless Steel A2/A4 (Outdoor cladding, maritime environments).

Coil Capacity: 300 nails per coil (Jumbo coils up to 1,000 nails available for automated manufacturing systems).

100% Tool & Machine Compatibility:

Guaranteed seamless feeding in all major pneumatic tools
Bostitch, MAX, Paslode, BeA, Haubold, Senco, Prebena, Omer, Tjep, Holz-Her, Alsafix, Kihlberg)

Key Performance Advantages:

Zero Jamming: Precision weld-wire collation eliminates misfires on manual and robotic lines.
No Bending or Shearing: High-tensile steel wire drives easily through dense hardwoods and frozen timber.
Maximized Uptime: Standard (300) and Jumbo coils (up to 1,000 nails) reduce reload stops.
3 Shank Options: Screw (max hold in softwoods), Ring (extreme pull-out resistance / EN 14592), Smooth (fast assembly).
4 Coating Grades: Bright, Electro-Galvanized, Hot-Dip Galvanized (>50µm), and Stainless Steel (A2/A4).

EPAL-Certified Pallet Coil Nails
Strictly regulated for the production and repair of official Euro Pallets.
Failure to meet EPAL standards results in immediate rejection by European logistics networks.

Plain Nails 2,8 x 45 VY
Ring Nails 2.80/2.95 x 55 VW
Ring Nails 3.50/3.70 x 90 VU
Ring Nails 2.80/2.95 x 40 VX
Ring Nails 3.50/3.70 x 70 VV
Ring Nails 2,5/2,7 x 35 VZ

Mandatory Marking: EPAL emblem / Manufacturer identification code stamped on the nail head.

Compliance & Testing: Full EN 14592 compliance, strict head-pull-through parameters, certified wire tensile strength to prevent head shearing in automated lines (Storti, CAPE, Gulliver).

Bulk Common Nails / Loose Nails are supplied in bulk for industrial, construction, transportation pallet across Europe

* Sizes (mm) - 2.5, 2.8, 3.4
* Length (mm) - 32, 40, 50, 55, 65, 65, 70, 90

* Compliant with EN 14592:2008 certification
* Head types: flat, pattern
* Shank types: smooth, ring, spiral
* Point types: diamond, clinch
* Finishes offered: bright (uncoated), electro-galvanized, hot-dip galvanized, thermal diffusion zinc

Packaging Types
1000 kg Carton Box - 1 box on a pallet
25 kg small box - 36 boxes on a pallet

Applications span furniture and trim manufacturing, interior joinery, light pallets and packaging, fencing, garden structures, outdoor furniture, general carpentry, flooring, decking, subfloor installation, pallet production, heavy pallets, framing, marine construction, coastal structures, glulam beams, and bridge building.

Target industries include general construction, prefabricated buildings, furniture manufacturing, outdoor structures, engineered wood applications, and marine construction.

Why Choose Us
Supplier to European manufacturers
EU compliance with Mill Test Certificates
Flexible production - custom diameters, lengths, head/shank/point combinations
Competitive pricing on bulk volumes
Sample shipments available for evaluation