Hotmelt adhesive for the closing of duty free bags / safe bags. The adhesive tape has been tested and approved against manipulation with VOID OPEN, freezing spray, hair dryer etc
ACST 8521 Non-woven backing butyl tape is made of  non-woven fabric and butyl rubber binder. It is mainly used on connection of steel board and cement surface, repairing of metal roofing, waterproof of crevice & outdoor repairing of constructions. It is flexible and will not harden, thus it is easy to use and no wastage.
Applying instruction:
1. Apply different standard of tapes on different slots and widths.
2. Remove water, oil, stain &dust before using. Apply organic solvent to clean when needed. Water cleaning is allowed after surface is completely dry.
3. Tear off isolation paper and apply tapes along the slot.
4. Press tape by hand or stick to make sure tape adhere to object surface completely.
Red underground detectable warning tape(width 7.5 cm* thickness 110 )
Made from thin sheets of bi-oriented polypropylene material serves as protection for the underground pipe protection, such as water pipes, gas pipes and oil pipes designed for underground pipe protection with bright colors, which help strengthen the visual results width 7.5 cm* thickness 110 and roll length is 200 meter
Polyethylene Pipelines Cold Applied Tape
Composition: It is tape-shaped anticorrosion material made of Polyethylene film heat laminated with adhesive layer of butyl glue. Usage: It is extensively used in the pipework of oil and natural gas transportation, petrochemical industry, electric power, metallurgy, urban natural gas network of pipes, the outside anticorrosion project of the metal pipes involved as well as the outside anticorrosion project of the underground and overhead metallic conduit of the works of petrochemical industry, natural gas and coal transportation Thickness: 0.30 - 1.30mm Width: 50, 75, 100, 150, 230, 300mm Length: 30 - 200m Features: Excellent adhesion to pipe and self Resistant to UV Can be applied over a wide temperature range Good conformability and consistent uniform thickness Easily applied with no special equipment Compatible with common pipe coatings Excellent resistance to cathodic disbonding Meets ASTM D 1000 Standard Cold applied Application: Prepare surfaces by removing all loose scale, rust or other foreign matter by grit blasting or wire brush. Surface must be clean, dry and free of grease. Apply thin film of Butyl Primer to all surfaces to be wrapped and allow to dry. Peel back interleaving and apply adhesive side of the tape to the surface and press down. Apply the tape spirally with enough tension to make it conform. Remove interleaving as wrapping proceeds. Overlap each turn by at least 1" or 55% to achieve double thickness. Irregular surfaces such as valves, flanges, etc.
Tape in remy hair extensions wholesale
Hair material: 100% quality guaranteed remy hair, or even better but expensive virgin cuticle hair.
Tape size: three main sizes, the 1st is the most ordered one, 4cm wide and 0.9cm deep, the 2nd, 4cm wide by 0.7cm deep, the 3rd, 8cm wide by 0.9cm deep. For sure, westlooks can customize any sizes according to clients` requests.
Hair length: 12 inch (30cm), 14 inch (35cm), 16 inch (40cm), 18 inch (45cm), 20 inch (50cm), 22 inch (55cm), 24 inch
Packaging: 10 pieces per pack, 20 pieces per pack, or 40 pieces per pack.
Westlooks offers free service of packaging design and modification, and then we produce the hair order and packages together, so westlooks¡¯ clients feel easy to get the well-packed tape hair extensions.
These double coated tapes feature equal adhesive strength on each side for reliable attachment but with easy separation for repositioning or multiple openings and closings.
A double coated acrylic adhesive tape with slight differential tack that offers good solvent resistance and works on a variety of substrates or materials for temporary mounting of light weight materials such as paper, films or foams.
This is good for adhering, affixing, mounting, holding, attaching, temporary positioning, paper, photographic paper, foams, cardboard and crafts. Core starting and thin flexible materials
High temperature resistance and flame retardant
Excellent initial tack, peel strength and long term aging resistance
Pressure sensitive acrylic adhesive has good bonding performance and easy to stick on sorts of products surface
Quick details
Material: polyester use: masking adhesive side: double sided adhesive: acrylic adhesive type: hot melt, pressure sensitive, water activated feature: freon-proof design printing: offer printing place of origin: jiangsu, china (mainland) brand name: sdk model number: sdk8207 thickness: 50-200mic width: 1040mm usable width: 1020mm color: white adhesion: > 1000g/inch length: 1000m per roll size: jumbo roll and small roll authentication: sgs/rohs feature: environment friendly
1)materials: crepe paper2) color: beige3) applications: the belting tape coated with kraft-liner applied to taping of the transformers and the plug-in 4) excellent adhesion, good tensile strength and holding power, length specialty can raise your working efficiency 5)also the adhesive belting tape can be used widely in the plywood field.
We can manufacture the size of the products you requirment
Xw-210 bopp tape slitting machine
Application : suitable for slitting bopp adhesive tape, cellophane tape, etc.
Feature
Feature
1. 4 shaft automatic exchange to rewind
2. Adopting "extend roll" device, eliminates the corrugating phenomenon during sending materials of adhesive tapes.
3. Unwinding parts locates on the back of the machine , elegant appearance .
4. With automatic labeling and soundproof shiled for customer¡¯s choose
Main technical parameters
ModelXw-210Xw-210
Effective width1300 mm1600 mm
Max. Unwind diameter800mm800mm
Min. Slitting width10mm10mm
Max. Rewind diameter(shaft3") exchange 4 shafts150mm150mm
Power supply 3 phase 380v 50hz
Delivery time 30 days after receiving the deposit
Package wooden package
Brand xinwang
Origin china
Certification iso9001:2008
High anti-clogging ability, low requirement about water source.
Low working pressure, low input on water source and pipeline.
Water high utilization, saving water obviously.
Can be used to sprinkle fertilizer and farm chemical, water irrigation evenly, no soil hardened, no fertilizer losing.
Product Features:
1. Used a wide range of paint industries(house.construction.shipbuilds.automotive and etc)
2. In door and out door protection
3. Prevent and flake(Fully treated Film)
4. Simple and convenient way in plastic sheet
5. Multi-Folded plastic film
6. Self static cling film
Width: 300mm-2700mm
Thickness: 8mic~10mic
Material: HDPE.
1. Product Description:
DF01-1 is a self-adhesive, non-curing, double-side waterproof sealing butyl tape. Excellent weather resistance, aging resistance, and waterproof. It has strong adhesion of steel, glass, concrete, PC board and other material surfaces, which has the functions of sealing, shock absorption and protection for them.
2. Features:
(1) It could withstand certain deformations for it follows well with non-curing lifelong.
(2) It has UV-resistance and can last up to 20 years.
(3) It has good resistance to chemical corrosion, acid and alkali.
3. Application:
(1) The overlap between color steel plates and lighting panels of metal roofing.
(2) Sealing and waterproof of doors and windows, concrete roofs and ventilation pipes.
(3) For installation of PC boards and polycarbonate panels.
4. Specification:
2mm*10mm* N mm and so on.
Packing: Cartons.
Color: Black, Gray, White.
Packaging Material ribbon
Automatic Grade Automatic
Power 1500W
Application Textiles
Condition New
Packaging Type ribbon
Driven Type ultrasonic
size: 1200x550x1350mm
Weight: 125kg.
Features:
1.The machine is mainly used for taping edge of mattress panel and soft cushion.
2.Rather than moving around, the head is fixed but can move up and down to adapt to different height of mattress.
3.The angle of the head is adjustable.
4.When working ,the conveying belt drives the mattress to proceed. when one side is finished ,the machine can turn 90 degree automatically to start taping the next side .
5.The taping of the corner is finished while turning.
6.When the top four sides are completed ,the machine can turn the mattress over for taping the other four sides.
7.The machine needs only one person and there is no need for him to move around or overturn the mattress manually.
8.The machine is with a higher efficiency and need less labor .
Technical data:
Mattress thickness:150-420mm
Head lifting range:125-450mm
Table size:2000*3950*900mm
Machine size:2380*1830*1650mm
Power supply:3-phase,380V,50HZ
Total power:3KW
Air supply 0.7-1.0 mpa
Total weight:1300KG
Capacity :18 units /h.
Automatic Tape Dispenser M-1000 can offer one piece of tape at one time automatically and quickly. The operators can set the required length easily. It can save the cutting time and improve the working efficiency. It can also set as ¡§manually offering tapes¡¨. The cutting length is from 20mm to 999mm and the cutting width is from 7mm to 50mm.
