EXCELLENT RESISTANCE TO CHEMICAL CORROSION
EXCELLENT SOFT SEALING, LIGHT CLAMPING SEALING MATERIAL
HIGH RESILIENCE & RECOVERY, SUITED FOR REUSE
LOW CREEP & LOW COLD FLOW UNLIKE NORMAL PTFE
EASY TO CUT WITH BLADE OR SCISSORS
BIOSAFE AND INERT
FIBROUS 3D STRUCTURE- EQUAL PROPERIES IN EACH DIRECTION
Dimensions in mm
FLAT SHEETS - 1500 X 1500 X THICKNESSES 0.5 , 1.0 , 1.5 , 2.0, 3.0, 4.0, 5.0, 6.0
CUT MADE-TO-ORDER GASKETS - CIRCULAR , RECTANGULAR , AS PER DRAWING ANY SIZE UPTO 1500 X 1500
EXCELLENT RESISTANCE TO CHEMICAL CORROSION
HIGH BREAKDOWN VOLTAGE / DIELECTRIC STRENGTH
BIOSAFE AND INERT
EXTREMELY LOW WATER AND GAS ABSORPTION
LOW STATIC AND DYNAMIC FRICTION COEFFICIENT
HIGHLY NON STICK FOR SMOOTH PASSAGE OF FLUIDS
HIGH TEMPERATURE RESISTANCE
Dimensions in mm
PLAIN TUBING NATURAL & COLORED / STRIPED - 0.5 TO 25.0 ID X 0.75 TO 28.0 OD
CORRUGATED TUBING NATURAL & BLACK - 6.0 ID TO 65.0 ID
HEAT SHRINK TUBING NATURAL - 2.0 ID TO 100.0 ID
IMPROVED HARDNESS OVER VIRGIN PTFE
EXCELLENT WEAR RESISTANCE OVER VIRGIN PTFE
HIGH COMPRESSIVE STRENGTH
EXCELLENT OILFREE SLIDING MATERIAL WITH LOW FRICTION
EXCELLENT OILFREE BUSHING & PISTON RING MATERIAL
SOME GRADESBIOSAFE AND INERT
REDUCED CREEP
Dimensions in mm
EXTRUDED RODS - 5 TO 100 X 1000 L
PRESSED RODS - 25 TO 300 DIA X 300 L
PRESSED SHEETS - 4 TO 100 THICK X 10002 / 12002 /15002
SKIVED SHEETS - 0.25 TO 3.O THICK X 1000 / 1200 / 1500 X LONG ROLLS
EXTRUDED HOLLOWS - 20 OD X 10 ID TO 150 OD X 75 ID X 1000 L
PRESSED HOLLOWS - 175 OD X 75 ID TO 1200 OD X 1050 ID X 100 / 200 / 300 L
CUSTOM SIZES - RODS, SHEETS, HOLLOWS AVAILABLE ON REQUEST WITH MOQ
MICROMACHINED CIRCULAR PARTS - 0.5 TO 10 DIA
MACHINED CIRCULAR PARTS - 10 TO 1200 DIA
MACHINED SQUARE / RECTANGULAR PARTS - 5 X 5 TO 1000 X 2000 / 1500 X 1500
EXCELLENT RESISTANCE TO CHEMICAL CORROSION
EXCELLENT SOFT SEALING MATERIAL
HIGH BREAKDOWN VOLTAGE / DIELECTRIC STRENGTH
BIOSAFE AND INERT
LOW STATIC AND DYNAMIC FRICTION COEFFICIENT
HIGHLY NON STICK
HIGH WEATHERING RESISTANCE
HIGH TEMPERATURE RESISTANCE
Dimensions in mm
EXTRUDED RODS - 1 TO 5 Dia X Long Spools
6 TO 25 Dia X 1000 OR 2000 L
30 TO 200 Dia X 1000 L
PRESSED RODS - Available in the above sizes in 300 L
PRESSED SHEETS - 4 TO 100 Thick X 10002 / 12002 /15002
4 TO 100 Thick X 1000 X 2000 Special Production with MOQ
SKIVED SHEETS - 0.2 TO 6.O Thick X 1000 / 1200 / 1500 / 2000 Wide X Long Rolls
EXTRUDED HOLLOWS - 20 OD X 10 ID TO 150 OD X 75 ID , 1000 / 2000 L
PRESSED HOLLOWS - 175 OD X 75 ID TO 1200 OD X 1050 ID , 100 / 200 / 300 L
ONE-SIDE SODIUM ETCHED PTFE SHEETS - Available in all sizes
CUSTOM SIZES - Rods, Sheets, Hollows available on Request with MOQ
MICROMACHINED CIRCULAR PARTS - 0.5 TO 5 Dia
MACHINED CIRCULAR PARTS - 5 TO 1200 Dia
TECHNICAL DATA SHEET
PROPERTY â?? STANDARD - VALUE
Density - ASTM D792 - 2.16 - 2.20 g/ cubic centimeter
Water Absorption - ASTM D570 - Less than 0.01 %
Tensile strength - ASTM D638 -greater than or equal to 200 kg/ square centimeters
Elongation - ASTM D638 - greater than or equal to 300 %
Impact strength, Izod,23 Degree Celsius - ASTM D256 - 1.6 J/cm
Hardness - ASTM 785 - 50 - 55 Shore D
Compressive strength at 1% def. - ASTM D695 â?? 40 - 50 kg/ square centimeters
Thermal conductivity - ASTM D2214 - 0.2 W/m. K
Coefficient of Thermal Expansion, 25 to 100 Degree Celsius - ASTM E831 - 16 x 1-5 Degree Celsius -1
Volume resistivity, at 50% RH - ASTM D257 - greater than or equal to 1018Ohm cm
Surface resistivity , at 50% RH - ASTM D257 - greater than or equal to 1017Ohm
Dielectric strength - ASTM D149 - greater than or equal to 55 KV/mm
Safe Operating temperatures - 50 to 200°C(biological, pharma, food applications)
- 50 to 260°C(Non-bio/food/ pharma applications)
Coefficient of friction, static - ASTM D3028 - Less than 0.09
Coefficient of friction, dynamic - ASTM D3028 â?? Less than 0.05
Moisture / solvent absorption - Negligible
Combustibility - Non-combustible
Weather resistance - Excellent
Chemical resistance - Excellent, except for highly fluorinating agents
Product range of ptfe rods, sheets and hollows:
Rods : extruded - diameter 3 to 200, length 1000 / 2000
Molded - diameter 20 to 775, length 300
Psheets : skived - thick 0.05 to 5, width 300 to 1800
Molded - thick 1 to 150, area 300 x 300 to 1500 x 1500
Hollows : skived - od 10 to 150, id 4 to 100, length 1000
Molded - od 25 to 1440, id 10 to 1420, length 300
Other made-to order sizes on request
We offer the following types of tubings in ptfe, fep and pfa materials :
Plain tubing
Colored tubing
Striped coloured tubing
Radiopqaue stripe tubing
Multilumen tubing
Tubing fabrications
Our tubings are used for the following applications :
Medical (usp class vi approved)
Instrumentation
Automotive push pull cables
Industrial and process hydraulics and other fluids
Electrical and electronic insulations (ul approved)
Fabric available- 100% cotton, 100% Linen, Poly cotton, Viscose, Satin, Rayon Twill etc.
Width- 36-58"
Design- Printed, Plain, checks etc.
Price- $0.8-$3/- FOB New Delhi or as per quality.
We shall be glad to serve you.
Bulk qty only.
Sheeting fabric is a plain weave light weight fabric comes in 4 / 5 / 6 ounce weight in various widths from 36 inches to 120 inches. Sheeting fabic is widely used as drop cloht, dust sheet, grocery bags, bed sheets, lining purpose apart from its other various uses. Sheeting fabric can also be used as dust sheet and drop cloth, after doing plastic lamination on it, it can also be used as anti-skiting sheet. Sheeting fabric has a wide use product, which can be used in any purpose.
Features:
1.Light weight
2.Fine finish
3.Soft texture
4.Easy to carry
5.Multipurpose product
6.Available in various widths
7.All colors are available as per order
8.Durable
9.Long life
Services available with sheeting Canvas:
1.Dyeing (all as per European Standards and tested quality)
2.Printing
3.Wax Coating
4.Fire Retardant Treatment
5.Waterproof Treatment
6.LD Lamination (to give smooth finishing and to make water proof)
7.bag manufacturing
Flannel Fabric is a special cotton fabric with fur like feel. Flannel fabric is can be made in any quality of cotton fabric. Flannel fabric makes normal cotton fabric in soft feel and fur feel. Flannel fabric is widely used in packing products to protect their products.
Features:
1.Soft feel
2.Soft texture
3.Re-usable
4.Washable
5.100% cotton fabric made
6.Comes in various widths
