3A025 Car Computer Board Chip is car LCD Background Power chip, 3A025 is vulnerable parts on automotive module controller board, 3A025 Car ECU computer driver electronic IC can repair the faulty ECU Programmer and ECU circuit board
7094 Automobile Spare Parts Supplies Suppliers
Short on time? Let Automobile Spare Parts Supplies sellers contact you.
Forging
Crankshaft
Aluminum Motorcycle Parts Forging Machining Anodizing
ODM Works forged component division specializes in cold forging and hot forging manufacturing processes.
Forging is a manufacturing process where the metal is hammered, pressed or rolled under high, localized pressure and shaped into high strength parts known as forgings. This metal working method has been in use for centuries and was traditionally deployed in the manufacture of tools, machine parts, weapons, kitchenware and jewelry.
During the forging process, the coarse grain structure of the metal is broken down into finer grains, and a grain structure that is better aligned towards the desired directional strength can be obtained; in addition, gas porosity and low-density/empty spaces may be removed, and cracks sealed during the process. Forging thus produces parts that are much stronger than those produced by any other metal-working process. Forgings are therefore widely used in applications where great strength is required and reliability and human safety are critical.
Forging Machine Parts, Forging Auto Parts, Hammer Forging Services Supplier China.
Power range:46000 kw
Transmission ration range:1.25450
Output torque:top to 950 kn.M
Characteristics:
, design
1.) highly standard modular designed, more sizes with a reduced variety of parts.
2.) higher operational reliability combined with increased power capacity.
, mounting position
The gear units can be supplied for either horizontal or vertical installation.
Other arrangements are also possible on request.
, long service life
Under the condition of accueately selecting type size and the normal maintenance and use, main components (expect those easily-disabled) can last as long as up to more than 50, 000 hours.
, low noise
All key components are finished by precisely machining; grinding the gears; designing noise-absorbing housings; accurate assembly, and finally tested, and therefore, fairly low noise is reached.
, thermal conduction
1.) the gear units have a high efficiency.
2.) through enlarged housing surface areas.
3.) because large fans incorporating a new type of air conduction fan cowl are being used.
Specifications:
Power Range: 0.1230KW
Transmission Ration Range: 7.5712901
Output Speed: 0.04~375 r/min
Output Torque: Top to 6500 N.m
Features:
Highly Standard Modular Designed
Quality Material Ensures Product Reliability
Wide Scope Transmission Ratio With Fine Division
High Strength, Compact Dimension
Long Service Life
Low Noise
High Efficiency
Large Radial Loading Ability
Axial Load Ability Of Up To 5% Of Radial Load
Type and Models:
Structure Form
S Series Foot mounted with solid output shaft
SF Series B5 flange mounted with solid output shaft
SA Series With Hollow output shaft
SAF SeriesB5 flange mounted with Hollow output shaft
SAZB14 flange mounted with hollow shaft
SHWith Hollow shaft & Shrink Disk
SHFB5 flange-mounted type with hollow shaft & shrink disk
SHZB14 flange-mounted type with hollow shaft & shrink disk
SAT/SHTTorque arm mounted with hollow output shaft
S..SZ..AD SeriesInput shaft type to instead of motor
S...R SeriesCombined types of series GK and GR to reach very big ratios.
CustomizedProfessional technical team offer customized design and item.
Characteristics:
1. The gear is made of high strength low carbon alloy steel through carburization and quenching. The hardness of tooth surface may reach to hrc5862. All gear adopts nc tooth grinding process, high in accuracy and good in contact performance,
2. Highly transmission efficiency: single stage, more than 96.5%; doublestage, more than 93%; threestage, more 90%;
3. Smooth and stable in run, low noise;
4. Compact size, light weight, long service life and high load capacity;
5. Easy to disassemble, inspect and assemble.
Main models:
Zdy80, zdy100, zdy125, zdy160, zdy200, zdy250, zdy280, zdy315, zdy355, zdy400, zdy450, zdy500, zdy560
Applying industries,
This product is widely applied to fields of metallurgy, mines, hoisting, transportation, cement, architecture, chemical, textile, printing.
Specifications:
Power Range: 0.12200KW
Transmission Ration Range: 1.333000
Output Speed: 0.04~522 r/min
Output Torque: Top to 50000 N.m
Features:
Highly Standard Modular Designed
Quality Material Ensures Product Reliability
Wide Scope Transmission Ratio With Fine Division
High Strength, Compact Dimension
Long Service Life
Low Noise
High Efficiency
Large Radial Loading Ability
Axial Load Ability Of Up To 5% Of Radial Load
Type and Models:
Structure Form
K SeriesFoot mounted with solid output shaft
KF SeriesB5 flange mounted with solid output shaft
KA SeriesWith Hollow output shaft
KAF SeriesB5 flange mounted with Hollow output shaft
KAB/KHB SeriesHousings of type GF with Hollow output shaft
KAZB14 flange mounted with hollow output shaft
KHWith Hollow shaft & Shrink Disk
KHFB5 flange-mounted with hollow shaft & Shrink Disk
KHZB14 flange-mounted with hollow shaft & shrink disk
KAT/KHTAltered type by adding torque arm and other accessories on KA/KH type
K..SZ..AD SeriesInput shaft type to instead of motor
K...R SeriesCombined types of GK and GR to reach very big ratios.
CustomizedProfessional technical team offer customized design and item.
Specifications:
Power range: 0.12160kw
Transmission ration range: 1.6521221
Output speed: 0.05809 r/min
Output torque: top to 36000 n.M
Features:
highly standard modular designed
quality material ensures product reliability
wide scope transmission ratio with fine division
high strength, compact dimension
long service life
low noise
high efficiency
large radial loading ability
axial load ability of up to 5% of radial load
Type and models:
Structure form
R seriesfoot mounted units, with two or three stages helical gears.
Rf seriesb5 flange mounted units, with two or three stages helical gears.
Rx seriesfoot mounted units, with single stage helical gears.
Rxf seriesflange mounted units, with single stage helical gears.
Rm seriesflange mounted helical geared motor, with extended bearing housing.
R..Sz..Ad seriesinput shaft type, altered unit connected by input shaft to instead of motor.
R..R seriescombined unit of two different types, to realize very big ratios.
Customizedprofessional technical team offer customized design and item.
Characteristics:
1. The gear is made of high strength low carbon alloy steel through carburization and quenching. The hardness of tooth surface may reach to hrc5862. All gear adopts nc tooth grinding process, high in accuracy and good in contact performance
2. Highly transmission efficiency: single stage, more than 96.5%; doublestage, more than 93%; threestage, more 90%;
3. Smooth and stable in run, low noise;
4. Compact size, light weight, long service life and high load capacity;
5. Easy to disassemble, inspect and assemble.
Characteristics:
1. High speed ratio and efficiency
Single stage transmission can reach to 1:87 of speed-down ratio and the efficiency is more than 90%. If use multi-speed drive the speed-down ratio is bigger.
2. Compact structure and small size
Being adapted epicyclic transmission principle, the input & output shaft are at same axis center, it is compact.
3. Smooth and stable run and low noise
The cycloidal pinwheel has more meshed teeth, the overlapping coefficient id big and the machine part is stable, the vibration and noise is limited at the minimum content.
4. Reliable in operation and long life
Because the main parts are made of bearing steel through quenching treatmenthrc58-62, it got high strength. Meanwhile the transmission contact of part adapts rolling friction, so it is durable and long life.
5. Strong overload capacity, resistant to impact, small moment of inertia.
It is used for the occasion of frequently starting and positive and negative rotary.
Power: 0.4~350 kw
Transmission ration range: 8.23~500
Max allowable redial load for output shaft: 800~13400 kg
Characteristics:
1.The gear is made of high strength low carbon alloy steel after carburizing and quenching, the tooth surface hardness of hrc58-62, gears are grinding process, high precision, good contact.
2.High transmission rate: single level greater than 96.5%, the double level is greater than 93%, greater than the level of 90%.
3.Smooth operation, low noise.
4. Long service life, high bearing capacity.
5. Easy disassembly, easy to install.
Zl -250 -10 -ii
Zl : type
250: center space
10: radioâ??s code
Ii: assembly form
Representation examples:
Main models:
Typemodels
1-stagezd10zd15zd20zd25zd30zd35zd40zd45zd50zd60zd70zd80
2-stageszl25zl35zl42.5zl50zl60zl65zl75zl85zl100zl115zl130ã??
3-stageszs50zs65zs75zs82.5zs95zs110zs125zs145zs165ã??ã??ã??
Main ratio and dimension:
Zd type one-stage middle harden gear reducer
No.1234567891011
Radio:22.242.52.83.163.5544.555.66.3
Vessel Oil lubrication stern shaft sealing apparatus This series can be used as sealing means ocean transport vessels , work boats , military vessels and inland waterway vessels auxiliary oil-lubricated stern shaft seal . Applicable reference axis for the ship loaded draft < 20 m , stern bush circumferential speed
marine water lubrication stern shaft (stern tube) sealing apparatus is suitable for kinds of ships, which are with water lubrication stern tube bearing. There is pneumatic seal, so that it can be inspected, adjusted, and maintained without docking.
Wireless Remote Control RGB LED car / motorcycle modification lights, with variety of static color modes and dynamic modes.
Support brake light function, give you more security when driving at night.
Super bright 5050 SMD RGB LEDs, multi changes with remote control, support memory function. Waterproof, heatproof, shockproof.
Pre-installed 3M Adhesive on light, small size, come with a extendable cable, easy to install.
Powered by DC 12V, suitable for most car, ATV, motorcycle like Halley, Knight.
White wire connect to brake light, when brake, all light will change to red; Red wire connect to battery positive electrode; Black wire connect to battery negative electrode.
Instructuons for remote control:
A: 15 static colors modes + 1 Multi-color flash mode + 1 Multi-color gradual change mode
B: Single color strobe mode (color depends on A key choose)
C: Single color breath mode (color depends on A key choose)
D: Power ON/OFF (with memory function)
Specification:
Type: Motorcycle Glow Lights
Material: Plastic
Quantity: 6pcs
Light Color: RGB
LED Quantity: 6pcs / light
LED Type: 5050 SMD
Mode: Static colors / Flash / breath / Strobe / ON / OFF
Waterproof: IP65
Power: DC 12V
Light Size: 4.8*2.4*0.8cm / 1.9*0.9*0.3" (L*W*H)
Light Cable Length: 9.5cm / 3.7" for one side
Package Includes:
6*Light
1*Transmitter (with 0.5m power canble)
1*Wireless remote with slip cover (battery included)
1*3M stacker
1*Extendable cable (1.2m)
