The Canon PFI-300 Ten Color Ink Tank Pack features a full set of specially formulated LUCIA PRO inks, designed to be used with the Canon imagePROGRAF PRO-300 printer. The ink produces professional quality photos with an expanded color gamut and enhanced black density. The included Matte Black ink provides deeper black levels on fine art paper as well as a wider dark area reproduction range with improved gradation. The Chroma Optimizer reduces the difference in ink droplet height to form a flat, smooth ink layer. This leads to an evenly reflected light, deep blacks, and bright, saturated colors on coated papers.
The CLI-42 Eight-Color Ink Tank Pack contains a full set of ink for the PIXMA PRO-100 Wireless Printer. The kit contains the following ink tanks:
CLI-42BK Black Ink Tank
CLI-42GY Gray Ink Tank
CLI-42LGY Light Gray Ink Tank
CLI-42C Cyan Ink Tank
CLI-42M Magenta Ink Tank
CLI-42Y Yellow Ink Tank
CLI-42PC Photo Cyan Ink Tank
CLI-42PM Photo Magenta Ink Tank
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 - 4 hours ambient drying.
3. Heat cure at 130 -160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 - 4 hours ambient drying.
3. Heat cure at 130 - 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 - 4 hours ambient drying.
3. Heat cure at 130 -160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 - 4 hours ambient drying.
3. Heat cure at 110 - 135oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 - 4 hours ambient drying.
3. Heat cure at 130 - 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 -4 hours ambient drying.
3. Heat cure at 130 - 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 -4 hours ambient drying.
3. Heat cure at 130 - 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 - 4 hours ambient drying.
3. Heat cure at 130 - 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 - 4 hours ambient drying.
3. Heat cure at 130- 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 - 4 hours ambient drying.
3. Heat cure at 130- 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 -4 hours ambient drying.
3. Heat cure at 130- 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 - 4 hours ambient drying.
3. Heat cure at 130 -160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 â?? 4 hours ambient drying.
3. Heat cure at 130 â?? 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 - 4 hours ambient drying.
3. Heat cure at 130-160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 - 4 hours ambient drying.
3. Heat cure at 130 -160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 - 4 hours ambient drying.
3. Heat cure at 130 -160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 4 hours ambient drying.
3. Heat cure at 130 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 -4 hours ambient drying.
3. Heat cure at 130 - 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 4 hours ambient drying.
3. Heat cure at 130 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 4 hours ambient drying.
3. Heat cure at 130 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
Squeege:60-65 SHORE
Mesh:Â 120/inch
Tension:� 25 N/cm2
Clean Up:Â Water
Strokes: Â 3
Rounds: Â 2
Printing Application
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 4 hours ambient drying.
3. Heat cure at 130 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
Squeege:70-75 SHORE
Mesh: Â 120 190/inch
Tension:Â 25 - 35 N/cm
Clean Up:Â Water
Strokes:Â 3
Rounds:Â 2
Printing Application
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 - 4 hours ambient drying.
3. Heat cure at 130 - 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 - 4 hours ambient drying.
3. Heat cure at 130 - 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 - 4 hours ambient drying.
3. Heat cure at 130 - 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 4 hours ambient drying.
3. Heat cure at 130 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 â?? 4 hours ambient drying.
3. Heat cure at 130 â?? 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
Squeege: Â 60-65 SHORE
Mesh: 120/inch
Tension: 25 N/cm2
Clean Up: Â Water
Strokes: Â 3
Rounds  2
Printing Application
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 4 hours ambient drying.
3. Heat cure at 130 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
Squeege 60-65 SHORE
Mesh: Â 120/inch
Tension:� 25 N/cm2
Clean Up: Water
Strokes: 3
Rounds: Â 2
Printing Application
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 â?? 4 hours ambient drying.
3. Heat cure at 130 â?? 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
Squeege: Â 60-65 SHORE
Mesh: Â 120/inch
Tension:� 25 N/cm2
Clean Up: Water
Strokes: Â 3
Rounds: Â 2
Printing Application
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 â?? 4 hours ambient drying.
3. Heat cure at 130 â?? 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
Squeege: Â 60-65 SHORE
Mesh: Â 120/inch
Tension:� 25 N/cm2
Clean Up: Â Water
Strokes: Â 3
Rounds: Â 2
Printing Application
1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 â?? 4 hours ambient drying.
3. Heat cure at 130 â?? 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.
Our ink is a high density and high gloss product. It strengthens the printing chromatography properties and improves the printing value-added through new ink technology to be used. It incorporates new foundation system that makes a wider water window and provides excellent printability.
Basic Pantone Inks are designed for accurate color matching, ensuring consistent and vibrant colors in printed materials. Ideal for commercial printing applications that require precise color reproduction.
Technical Specifications:
o Viscosity: Varies by color (generally 20-25 seconds)
o Color: Available in standard Pantone colors
o Drying Time: Drying time varies depending on the substrate
o Gloss Level: Gloss and matte options available
o Substrates: Works well on various substrates, including paper and cardboard
o Shelf Life: 12 months in unopened containers
: Rapid 1040 is a fast-curing sheetfed offset ink that excels in high-speed printing environments. It offers excellent color strength and stability, making it ideal for commercial printing applications requiring quick turnaround times.
â?¢ Technical Specifications:
o Viscosity: 18-22 seconds (DIN 4)
o Color: Available in various colors (CMYK and special colors)
o Drying Time: Rapid curing (30 seconds to 1 minute)
o Gloss Level: Glossy finish
o Substrates: Compatible with a wide range of substrates including coated papers and card stock
o Shelf Life: 10 months in unopened containers
TurbFlex is our Premium Environment
friendly water base ink Series for use
on Flexographic Presses. TurbFlex
ranges of water based flexo inks have
stable Ph and viscosity on press is
recommended for Paper Cup, Kraft
paper application Performance
Characteristic
- Strong Color & Good Gloss
- High Mileage
- Good Ink Transfer
- Good Printability
- Light Fastness Property.
UV Flexo Inks
Maxflex is a range of UV flexo inks intended
for printing of labels, tags, sleeves and
other applications found in narrow web
reproducing quality at speed.
Performance Characteristic
- Max flex inks have optimized flow for press performance
- Vibrant color strength at finer anilox with lower ink consumption
- Fast curing for higher press speed
- High Gloss
- Led flexo process colour and base colour
UV Offset Inks
- UV Sheetfed Process Colors
- LED UV Sheetfed Process Colors
- Base Concentrates & Spot Colors
- UV Web Process Colors
- Led UV Web Process colors
- Dry offset inks for plastic cups
Premium quality ink suitable for both straightline and perfecting presses
Description & Application
NovaInk Amaze is a sheet-fed offset ink designed to meet the demands of highest quality printing with high gloss, intense colors and sharp dots at high speeds on a wide range of paper choices.
Features & Benefits
Excellent ink-water balance; reduces frequent adjustments on press
Duct-fresh; reduces ink wastage and time spent in washing the press; saves time, money and labour
High rub resistance; allows printed sheets to be handled without damaging the print
High colour intensity; for high color contrast
Low dot gain; ensures sharp image reproduction even in areas of heavy ink coverage
Fast setting; enables quick post print operations
Description & Application
NovaInk Enduro is a universal sheet-fed offset ink that endures tough printing conditions on both the latest and older generation presses. It is suitable for printing on wide variety of substrates.
Features & Benefits
Excellent ink-water balance; reduces frequent adjustments on press
Duct-fresh; reduces ink wastage and the time spent in washing the press
Fast setting; enables quick post print operations
Low dot gain; ensures sharp image reproduction even in areas of heavy ink coverage
Low tack ink; makes it suitable for printing on gloss coated as well as uncoated papers of low grammage
This product is used on the knitting and cotton fabric dyed by reactive dyes. It will not be yellowing with long time after discharge, also the color discharge will keep brilliance.
1696 Printing Inks Suppliers
Short on time? Let Printing Inks sellers contact you.
