Features: Multi-point averaging. Suitable for large pipe. Resistant to high temperature, and corrosion.
Operating pressure: Max.10 bar
Operating temperature: Max.250 C
Length: 4.. 40"(100 ... 1000 mm)
Display readout: 5 digits(-9.9.9.9 +9.9.9.9.9)
Input: Current / Voltage
Output: Analog / Relay / RS-485
Accuracy: 0.1%F.S. 1 digital
IP rating: IP65(Front panel)
Features: Suitable for clean air. Resistant to high pressure and high temperature.
Sensor type: Thermal mass flow sensor
Measuring range: 0 ... 90 m/s
Output: 0 ... 20 mA / 4 ... 20 mA / 0 ... 1 V / 0 ... 5 V / 0 ... 10 V
Accuracy: 1.5% F.S.
IP rating: IP67
Features: Economic model for HVAC application.
Sensor type: MEMS
Measuring range: Temperature 0 .50 C / Humidity 0 ... 100%RH
Output: 4 ... 20 mA / 0 ... 10 V
Accuracy: Temperature 0.5 C / Humidity 3%RH
IP rating: IP54
Features: Designed for industrial application. Resistant to high temperature and high pressure.
Sensor type: Capacitive Humidity Sensor & Pt 100 A class
Measuring range: 0 . +180C
Output: 0 . 20 mA / 4 . 20 mA / 0 ... 10 V
Accuracy: Temperature 0.15 C / Humidity 2%RH
IP rating: IP65
It is a dining table.
It is a tea table.
It is an office desk.
It can be extended and contracted.
It can Storage.
It has a romantic atmosphere.
It has an elegant sense of the times.
Flexible expansion: When not in use, it only occupies an area of 1.8-2.0 meters, which is sufficient for 2-4 people to have meals, chat, drink tea, or do home office work. The hidden sliding panel can extend up to 1-2 meters, easily accommodating 6-8 people for a gathering.
Smooth and durable: The frame conceals the drawers, and the sliding rails are made of high-quality hardware components.
Function switching: It can be used as a dining table, a tea table or a temporary workbench. Equipped with power rails and a metal sink, it can also be upgraded to a height-adjustable socket or an induction cooker.
Stable structure: The countertop is made of high-quality granite, smooth and seamless, available in various colors, and supported by a metal frame, providing strong load-bearing capacity.
Ambient light design: There is a adjustable LED light strip at the bottom, allowing you to freely adjust the brightness of the light.
Tungsten carbide (TC) balls are used where extreme hardness and wear resistance is required; in such applications as bearings, ball screws, valves and flow meters. They are also used for coining and as pivots, detents and tips for gages and tracers. Decimal-inch sized tungsten carbide balls are widely used for ballizing (below) or measuring hole sizes (see Inspection Products data sheet.) They are also used for inspection tools, comparative checking and gaging.
A. When the ventilation technique with open high frequency and low humidify volume is adopted, the airway pressure is low with little effect of oxygen compound is good and the oxygen partial pressure can be increased rapidly. While the one with regular frequency and great humidify volume is adopted, CO2 can be ejected easily.
B. Convenient connecting, it can be connected through the nasal and endotracheal tube.
C. The ventilation mode with high frequency and low humidify volume will not easily produce pressure hurt.
D. The effect of oxygen dispersion is so good that the tested beastie can stand for a long time.
E. Adjustable oxygen concentration, the ventilation mode with continuous oxygen stream and good humidifying effect can ensure beastie to respire independently.
F. Be fit for manual ventilation test for monkey, rabbit, dog etc.
G. Configured with multiform ventilation conduit for beastles or connected with gas source, in addition.
Specifications·ª
Frequency:8f+150 breaths/min
I/E ratio·ª1:1f+1:3 and inverse ratio
Driving Pressure ·ª0f+0.08MPa
Gas source: High-pressure oxygen source or air compredsor. The input pressure is not more than 0.16MPa
High-pressure gas source:0.16MPa
Output Limit of reductor: not less than 0.16MPa
Ventilation Mode:HFJV(High Frequency Jet Ventilation);CPAP(Continuous positive airway pressure),Manual Control Mode.
We can produce various pneumo-hydraulic pressurization systems according to customers requirements. These systems can be used for pressure tensioning, hydraulic drive and control, hydraulic test, etc. The maximum pressure can be up to 6400bar. ODMT Pneumo-hydraulic Pressurization System has compact structure and is easy to operate. What the users need to do is only to lead the drive air to the liquid port, then adjust the pressure regulating valve of the drive circuit to reach the needed working pressure. Typical liquid pressurization operation:
Typical applications:
Static and burst test for valves, pipe fittings, etc.
Test for automobile brake system and nozzles.
Chemical reagent injection into pipelines or reaction kettles.
Putting coolant into jars.
Providing force for clamping, forming, drilling, shearing and stamping machines.
Providing buffer and lift force to protect molds when large presses overload.
Static and dynamic test for aviation accessories.
Performance test and calibration for instruments.
High pressure cleaning and water injection of waterjet cutting equipment.
Injecting oil into lubrication system of mechanical equipment.
Providing clamping force for valve test.
Providing press force for shaft sleeve and cylinder liner.
Controlling ground and underground safety valves.
46048 Pressure Cookers Pans Suppliers
Short on time? Let Pressure Cookers Pans sellers contact you.
