Find Verified Pressure Cookers Pans Suppliers, Manufacturers and Wholesalers

APG technique is similar with thermoplastic injection machine. First mix resin, hardener, silicon powder and pigment by mixing plant(under vacuum), once the material finish mixing, give air pressure (2-3.5KG) to the mixing pots, so the material will be injected into mould, meanwhile, the air will release from mould when mould full filled material, material will be cured because mould is hot. The injection nozzle must continue inject material when curing
 It is large and medium-sized equipment, dimension of clamping plate  is 1000*1200mm,length of upper and lower core-pulling stroke can be determined according to the product(it needs lower core-pulling foundation pit when the lower core pulling exceeds 300mm).
It is mainly used for transformer, 12KV-1250A,3150A insulating cylinder, contact box, 40.5KV bushing, bending plate, upper and lower shell of SF6 insulating cover, etc.

Need, pressure compensated hydraulic pump
Nominal 350 bar
Max 420 bar
1500 rpm 32 LPM
1800 rpm 52 LPM
Send ex work quote to the following email

Minimum 5000 pc. Lot upto 1, 00, 000 pc. Order



50 pc. Box with aprox 27 kg weight

This series of pump uses single pneumatic non-equilibrium gas distributing valves to move to and fro automatically. The drive parts of the pump are made of aluminum alloy or stainless steel. The full set of sealing parts is imported. The maximum drive pressure is 10bar. We suggest customers use air pressureâ?¤8bar to ensure long lifespan of the pump.

The diameter of the drive piston is 160mm. This pump is single acting. The pump heads can cool the exhaust air.







This series of pump has single stage. To reach the needed pressure, the input gas should be pressurized to some degree in advance. The pre-adding pressure is different according to the needed maximum pressure. The maximum pressure can be up to 80Mpa. The reversing way of OMD-Series is the same as that of OMA-Series, but OMD-Series has double pump heads, which is designed based on OMA-Series. The pump is made of aluminum alloy and stainless steel. The diameter of its drive piston is 160mm, drive gas pressureâ?¤8bar. Both pump heads can cool the exhaust gas. The pipelines which connect the two inlets and two outlets will be completed according to customers requirements before they leave the factory.










OMT-Series











This series of pump has double stage. It can amplify extremely low pressure into very high pressure. The drive gas pressureâ?¤8bar. The rage of inlet gas pressure is 0.5-10bar. The maximum pressure can be up to 80Mpa. The pump is made of aluminum alloy and stainless steel.

The diameter of its drive piston is 160mm. Both pump heads can cool the exhaust gas.

Guangzhou Meiyan Environmental Technology Co., Ltd. (brand MEIYAN) manufactures high-pressure misting systems engineered for greenhouse humidification and livestock poultry farm cooling in hot climate agriculture. Designed for the demanding conditions of the Middle East, Southeast Asia and Africa, our systems deliver reliable cooling and humidity control for farms, poultry houses, greenhouses, hotels, resorts, restaurants and outdoor venues.

The core of the system is a 70bar high-pressure pump that produces a fine mist of 5-15 microns. This ultra-fine fog evaporates quickly without wetting surfaces, making it suitable for greenhouse humidity regulation, poultry house heat stress reduction and open-air cooling. Stainless steel anti-drip nozzles prevent water dripping after shutdown, protecting crops, feed and equipment. Each system covers 50-300 sqm, with customizable pipe layout to match greenhouse bays, poultry sheds, barns or outdoor terraces.

An optional mosquito repellent dosing module using natural pyrethrum supports mosquito control in humid agricultural and hospitality environments. The system is CE certified and backed by a 2-year warranty. As a manufacturer, we accept OEM/ODM orders and can adapt voltage, pipe configuration and nozzle placement to your project requirements.

Applications:
- Greenhouse humidification and cooling
- Poultry and livestock farm cooling
- Hot climate agriculture and horticulture
- Hotels, resorts, restaurants and outdoor venues
- Mosquito control in humid areas

Specifications:
- Pump pressure: 70bar
- Mist particle size: 5-15 microns
- Nozzle: stainless steel anti-drip
- Coverage: 50-300 sqm
- Pipe layout: customizable
- Optional mosquito repellent dosing module (natural pyrethrum)
- Certification: CE
- Warranty: 2 years
- OEM/ODM: accepted

Tungsten carbide (TC) balls are used where extreme hardness and wear resistance is required; in such applications as bearings, ball screws, valves and flow meters. They are also used for coining and as pivots, detents and tips for gages and tracers. Decimal-inch sized tungsten carbide balls are widely used for ballizing (below) or measuring hole sizes (see Inspection Products data sheet.) They are also used for inspection tools, comparative checking and gaging.

Tungsten carbide rods.


Wooden box.

Tungsten carbide pellets.

Wooden box, carton.

Wire drawing die

Specialized in tungsten carbide products
Supply:
Tungsten carbide spray powders
Tungsten carbide bars/rods/plates/strips
Wire drawing dies
Tube drawing dies
Punching dies
Tungsten carbide pellets
Coal auger bits
Brazed tips
Other wear-resistant parts



Sandvik standard, iso standard drawing molds

A. When the ventilation technique with open high frequency and low humidify volume is adopted, the airway pressure is low with little effect of oxygen compound is good and the oxygen partial pressure can be increased rapidly. While the one with regular frequency and great humidify volume is adopted, CO2 can be ejected easily.
B. Convenient connecting, it can be connected through the nasal and endotracheal tube.
C. The ventilation mode with high frequency and low humidify volume will not easily produce pressure hurt.
D. The effect of oxygen dispersion is so good that the tested beastie can stand for a long time.
E. Adjustable oxygen concentration, the ventilation mode with continuous oxygen stream and good humidifying effect can ensure beastie to respire independently.
F. Be fit for manual ventilation test for monkey, rabbit, dog etc.
G. Configured with multiform ventilation conduit for beastles or connected with gas source, in addition.
Specifications·ª
Frequency:8f+150 breaths/min
I/E ratio·ª1:1f+1:3 and inverse ratio
Driving Pressure ·ª0f+0.08MPa
Gas source: High-pressure oxygen source or air compredsor. The input pressure is not more than 0.16MPa
High-pressure gas source:0.16MPa
Output Limit of reductor: not less than 0.16MPa
Ventilation Mode:HFJV(High Frequency Jet Ventilation);CPAP(Continuous positive airway pressure),Manual Control Mode.

Features
1.1 Walnut shell grain was used as polishing abrasive,The advantages of clean and pollution-free, high cleaning quality and long service life of abrasive, etc.
1.2 The lifting speed of abrasive barrel can be adjusted according to different products, which can realize the functions of slow rising and fast falling.
1.3 It consists of three workstation,and 2 material tanks,one of the workstation is used foe loading and unloading while the other two workstions are used foe coarse polishing and fine polishing at the same time.
1.4 Each station consists of 32 hangers and each one can clamp 4-6PCS,about 25min can polished 4x32=192PCS(depend on the size of product)
1.5 Can suitable for some complex shape products that the cloth polishing wheel cant polish.
1.6 The fixture can quick loading and unloading, flexible clamping, easy to operate.
1.7 Can polishing different products at the same time.
1.8 No need debug,no need edit program,no need dusting,easy operation.
Please contact us fo

Features
1.1 Walnut shell grain was used as polishing abrasive,The advantages of clean and pollution-free, high cleaning quality and long service life of abrasive, etc.
1.2 The lifting speed of abrasive barrel can be adjusted according to different products, which can realize the functions of slow rising and fast falling.
1.3 It consists of three workstation,and 2 material tanks,one of the workstation is used foe loading and unloading while the other two workstions are used foe coarse polishing and fine polishing at the same time.
1.4 Each station consists of 32 hangers and each one can clamp 4-6PCS,about 25min can polished 4x32=192PCS(depend on the size of product)
1.5 Can suitable for some complex shape products that the cloth polishing wheel cant polish.
1.6 The fixture can quick loading and unloading, flexible clamping, easy to operate.
1.7 Can polishing different products at the same time.
1.8 No need debug,no need edit program,no need dusting,easy operation.

1.The automatic polishing machine is an exclusive polishing system consisting 4 manipulators with of 6 axises rotary; Multiple stations simultaneous operation high flexibility and high product efficiency.
2.The control system adopts PROMAX motion control technology from Italy,stable propeert,high control accracy.
3.Programming method:demonstrator programming ,with protable handed device, contains manually mode to simulate the workmanship polishing and record the track; automatically operating model is available with pre-settled parameters program.
4.Polishing pressure and wear compensation control performance: When the polishing cloth wheel is worn out, the system can detect that the torque becomes smaller and automatically the compensation in all direction
5.Linear speed compensation: When the outer diameter of the cloth wheel is reduced, the system automatically increases the speed and compensation;
6.Program setting of add polishing wax:free setting of wax spraying time and frequency according to the characteristics of product.choice of slid wax or liquid wax
7.Full digital control, Can store 50 programs.Programs can be saved and invoked at any time.
8.CN/EN language display on Touch Panel. to set all parameters for an easy operation;fault codes display and alarm pages for quick troubles shooting and repair.

supercritical foaming autoclave equipment for experiment adopts high-pressure physical foaming molding technology, which is also a microcellular foaming molding technology. First, supercritical carbon dioxide or nitrogen and other gases are injected into a special plasticizing device to melt the gas. After the raw materials are fully uniformly mixed and diffused, a single-phase mixed sol is formed, and then the sol is introduced into the mold cavity or extrusion die to cause the sol to generate a large pressure drop, thereby causing the gas to precipitate to form a large number of bubble nuclei; in the subsequent cooling and molding During the process, the bubble nucleus inside the sol continuously grows and forms, and a foamed molded product is obtained.Compared with the equipment used for mass production, the volume of the foaming equipment for experiment is smaller, lighter in weight, and small in volume. It is mainly used in the experimental product testing stage at the initial stage of the product to find out the pressure and temperature data required for the product to be suitable for foaming.

EVA TPU PE Sole Foaming Machine is one kind of physical foaming equipment which uses supercritical fluid foaming technology to inject carbon dioxide or nitrogen as the foami ng medium into the supercritical foaming equipment, so that the gas and the molten raw material are fully mixed and diffused to form a single-phase mixed sol, which produces a large amount of sol. The pressure drop caused the gas to separate out to form a large number of bubble nuclei. In the subsequent cooling and molding process, the bubble nucleus inside the sol continuously grows and forms, thereby obtaining a microcellular foamed plastic product. The supercritical foaming equipment is an important equipment to realize this process.

1. Machine Application and Scope of Application
HZ 360-HS core shooting machine is a kind of automatic core shooting machine with the functions of vertical parting, full automatic, down-turning die, conveyor belt to convey sand core and automatic mixed sand lifting. Increased sales by 50% relative to the products on the market.
It is suitable for small and medium-sized work pieces in valve, faucet, hardware, hydraulic and pneumatic industries. It also applied to the hot core sand and coated sand of furan resin series hot box sand and urea-formaldehyde resin series. It is especially suitable for copper and
aluminum casting industry, which can meet the core-making requirements of the core-shooting process with three-component resin, complex core shape and low structural strength.
1. human-machine interface and imported high quality electronic control and pneumatic components to ensure accurate and reliable control and easy operation.
2. there are three modes: manual, single action and automatic.
3. the shooting port is 70 degrees to the sand, away from the high temperature area, so that the perforation is easy to manually clean.
4. The machine is equipped with integral moving mechanism of the base, which can make the base move along the X and Y axes, so that the perforation of the opposite mold into the sand hole more convenient and accurate.
5. The movable die is equipped with the core pulling rack to meet the special requirements of the mold. If you do not use core pulling, close the core pulling switch.
6. The angle of the quicksand in the sand storage bucket reaches 70 degrees and is equipped with a vibrating motor. It is suitable for the use of collapsible core sand with poor fluidity in the copper casting and aluminum industry.
7. With mold adjustment space, it is convenient to assemble different molds and reduce the requirements for the die size.
Please contact us for more specifications with your inquiry today! Our honor to sever you with our best service and highest quality. 
Whatsapp:+8613670190553
Wechat:+8613670190553
Email:dzivydeng@163.com

Robot operation faucet sanitary ware ,auto parts metal ,lockset and doorknob,thread processing grinding and polishing machine.The size range of the product can ba polished is 300mm and 3KG.

The equipment consisting of main components:Mechaincal arm M-20iA,belt sander,Feeding machine,Sand belt machine control system,Robot base,fixture ,automatic feed tray and contact wheeland etc.