Find Verified Piston Piston Rings Suppliers, Manufacturers and Wholesalers

Our range of products include pistons and rings.

Piston Rings

Piston Rings are made from high quality Grey C.I. Castings (Individual Casting) that has very fine grain to offer high tension at elevated temperatures of high-speed engines. The piston rings manufacturing range vary from 23b mm to 120 mm dia and are made for varied applications in cars, trucks, LCV's, tractors, industrial and diesel engines, air and gas compressors, ammonia compressors.

Available for all kind of vehicle, including Japanese model, Korean model, European model, Truck, Bus, Agriculture and Motorcycle. And the type we have diesel fuel (#555), gasoline (#777)

Piston ring

* Suitable for after replacement market
* Unsurpassed quality that you can trust
* Uses leading edge materials
* State-of-the-art manufacturing
* Exacting tolerances
* Meets or exceeds OEM specifications

Price of product (USD price or FOB price) - Ask for price
Product Origin - South Korea
Minimum Order Size and Packaging details - 1 pieces / general export packing

EXCELLENT RESISTANCE TO CHEMICAL CORROSION
EXCELLENT SOFT SEALING, LIGHT CLAMPING SEALING MATERIAL
HIGH RESILIENCE & RECOVERY, SUITED FOR REUSE
LOW CREEP & LOW COLD FLOW UNLIKE NORMAL PTFE
EASY TO CUT WITH BLADE OR SCISSORS
BIOSAFE AND INERT
FIBROUS 3D STRUCTURE- EQUAL PROPERIES IN EACH DIRECTION

Dimensions in mm

FLAT SHEETS - 1500 X 1500 X THICKNESSES 0.5 , 1.0 , 1.5 , 2.0, 3.0, 4.0, 5.0, 6.0

CUT MADE-TO-ORDER GASKETS - CIRCULAR , RECTANGULAR , AS PER DRAWING ANY SIZE UPTO 1500 X 1500



TECHNICAL DATA SHEET

PROPERTY - STANDARD - VALUE

Density - ASTM D792 - 0.75 - 0.95 g/cm3
Safe Operating temperatures - - 240 - 200 Degree Celsius (biological, pharma, food applications) 200 - 260 Degree Celsius (Non-bio/food/ pharma applications)
Compressibility - ASTM F36 - 45 +./- 5%
Recovery - ASTM F36 - 12 -13%
Creep Relaxation - ASTM F38 - 35 - 36 %
Sealability / leakiness rate Nitrogen at 4Mpa, 20 Degree Celsius - ASTM F 37B - 0.15 ml / hr
Sealability / leakiness rate Furnace oil 4Mpa, 20 Degree Celsius - ASTM F 37B - 0.02 ml / hr
Service Pressure - Full Vaccum to 19 MPa
Tensile Strength Both directions - ASTM D638 - 16 - 17 MPa
Moisture / solvent absorption - Negligible
Combustibility - Non-combustible
Weather resistance - Excellent
Chemical resistance - Example: Excellent, except for highly fluorinating agents

EXCELLENT RESISTANCE TO CHEMICAL CORROSION
HIGH BREAKDOWN VOLTAGE / DIELECTRIC STRENGTH
BIOSAFE AND INERT
LOW WATER AND GAS ABSORPTION
TRANSPARENT TO LIGHT AND RAYS
NON STICK FOR SMOOTH PASSAGE OF FLUIDS
HIGH TEMPERATURE RESISTANCE UPTO 200 Degree Celsius

Dimensions in mm

PLAIN TUBING NATURAL & COLORED / STRIPED - 1.0 TO 35.0 ID X 2.0 TO 38.0 OD
CORRUGATED TUBING NATURAL & BLACK - 6.0 ID TO 65.0 ID
HEAT SHRINK TUBING NATURAL & COLORED - 2.0 ID TO 100.0 ID ON REQUEST



PROPERTY - STANDARD - VALUE


Specific gravity - ASTM D792 - 2.16
Tensile strength - ASTM D638 - 31 Mpa
Ultimate elongation - ASTM D638 - 305 %
Flexural modulus - ASTM D790 - 586 Mpa
Impact strength - ASTM D256+23 Degree Celsius â?? 54 Degree Celsius - 155
Hardness - ASTM D2240 - 57 Shore D
Coefficient of dynamic friction - 0.2
Melting point - 260 Degree Celsius
Service temperature (20000h) with 50% retention of ultimate elongation -
205 Degree Celsius
Inflammability - UL-94 - 94 V-0
Dielectric constant at 103-106 Hz - ASTM D150 - 2.1
Dielectric strength - ASTM D150 - 45KV/mm
Arc resistance - ASTM D495(Stainless steel electrodes) - Greater than 300 S
Volume resistivity - ASTM D257 - Greater than 10 by 18 Omega cm
Weather resistance - "Weather-O-meter"(2000h)
Solvent resistance - ASTM D543 - Excellent
Chemical resistance - ASTM D543 - Excellent

EXCELLENT RESISTANCE TO CHEMICAL CORROSION
HIGH BREAKDOWN VOLTAGE / DIELECTRIC STRENGTH
BIOSAFE AND INERT
EXTREMELY LOW WATER AND GAS ABSORPTION
LOW STATIC AND DYNAMIC FRICTION COEFFICIENT
HIGHLY NON STICK FOR SMOOTH PASSAGE OF FLUIDS
HIGH TEMPERATURE RESISTANCE

Dimensions in mm

PLAIN TUBING NATURAL & COLORED / STRIPED - 0.5 TO 25.0 ID X 0.75 TO 28.0 OD
CORRUGATED TUBING NATURAL & BLACK - 6.0 ID TO 65.0 ID
HEAT SHRINK TUBING NATURAL - 2.0 ID TO 100.0 ID


TECHNICAL DATA SHEET

PROPERTY - STANDARD - VALUE


Specific gravity - ASTM D792 - 2.16
Tensile strength - ASTM D638 - 24.5 Mpa
Ultimate elongation - ASTM D638 - 350 %
Flexural modulus - ASTM D790 - 490 Mpa
Impact strength - ASTM D256+23 Degree Celsius â?? 54 Degree Celsius - 107
Hardness - ASTM D2240 - 55 Shore D
Coefficient of dynamic friction - 0.1
Melting point - 327 Degree Celsius
Service temperature (20000h) with 50% retention of ultimate elongation -
260 Degree Celsius
Inflammability - UL-94 - 94 V-0
Dielectric constant at 103-106 Hz - ASTM D150 - 2.1
Dielectric strength - ASTM D150 - 24KV/mm
Arc resistance - ASTM D495(Stainless steel electrodes) - Greater than 300 S
Volume resistivity - ASTM D257 - Greater than 1018 Omega cm
Weather resistance - "Weather-O-meter"(2000h)
Solvent resistance - ASTM D543 - Excellent
Chemical resistance - ASTM D543 - Excellent

IMPROVED HARDNESS OVER VIRGIN PTFE
EXCELLENT WEAR RESISTANCE OVER VIRGIN PTFE
HIGH COMPRESSIVE STRENGTH
EXCELLENT OILFREE SLIDING MATERIAL WITH LOW FRICTION
EXCELLENT OILFREE BUSHING & PISTON RING MATERIAL
SOME GRADESBIOSAFE AND INERT
REDUCED CREEP

Dimensions in mm

EXTRUDED RODS - 5 TO 100 X 1000 L
PRESSED RODS - 25 TO 300 DIA X 300 L
PRESSED SHEETS - 4 TO 100 THICK X 10002 / 12002 /15002
SKIVED SHEETS - 0.25 TO 3.O THICK X 1000 / 1200 / 1500 X LONG ROLLS
EXTRUDED HOLLOWS - 20 OD X 10 ID TO 150 OD X 75 ID X 1000 L
PRESSED HOLLOWS - 175 OD X 75 ID TO 1200 OD X 1050 ID X 100 / 200 / 300 L
CUSTOM SIZES - RODS, SHEETS, HOLLOWS AVAILABLE ON REQUEST WITH MOQ
MICROMACHINED CIRCULAR PARTS - 0.5 TO 10 DIA
MACHINED CIRCULAR PARTS - 10 TO 1200 DIA
MACHINED SQUARE / RECTANGULAR PARTS - 5 X 5 TO 1000 X 2000 / 1500 X 1500

TECHNICAL DATA SHEET
PROPERTY - STANDARD â??
25% Glass Fiber filled -
25% Carbon filled -
60% Bronze filled -
15% Graphite filled

Density - ASTM D792 -
2.25 g/cubic centimeter
2.08 g/cubic centimeter
3.85 g/cubic centimeter
2.10 g/cubic centimeter

Water Absorption - ASTM D570 -
Less than0.02 %
Less than0.05 %
Less than0.03 %
Less than0.05 %

Tensile strength - ASTM D638 -
Greater than 140 kg/square centimeters
Greater than 120 kg/square centimeters
Greater than 170 kg/square centimeters
Greater than 120 kg/square centimeters

Elongation at break - ASTM D638 -
Greater than 300 %
Greater than 80 %
Greater than 110 %
Greater than 150 %
Impact strength, Izod, 23 Degree Celsius - ASTM D256
-
-
-
-
Hardness - ASTM 785 60 -
62 Shore D
60 - 63 Shore D
65 - 70 Shore D
55 - 60 Shore D

Compressive strength at 1% def. - ASTM D695 -
80 - 90 kg/square centimeters
55 - 65 kg/square centimeters
110 - 120 kg/square centimeters
50 - 60 kg/square centimeters

Thermal conductivity - ASTM D2214 â??
0.36 W/m. K
0.53 W/m. K
0.76 W/m. K
0.44 W/m. K

Coefficient of Thermal Expansion, 25 to 100 Degree Celsius - ASTM E831
11.0 x 10-5 Degree Celsius -1
12.5 x 10-5 Degree Celsius -1
8.5 x 10-5 Degree Celsius -1
12.5 x 10-5 Degree Celsius -1

Volume resistivity, at 50% RH - ASTM D257 -
Greater than 1015Ohm cm
Greater than 104Ohm cm
Greater than 107Ohm cm
Greater than 1011Ohm cm

Surface Resistivity - ASTM D257 -
Greater than 1016 Ohm
Greater than 103 Ohm
Greater than 109 Ohm
Greater than 1012 Ohm

Dielectric strength - ASTM D149 -
Greater than 35 KV/mm
-
-
-
Safe Operating temperatures
-
- 50 to 200 Degree Celsius (biological, pharma, food applications) - 50 to 260 Degree Celsius (Non-bio/food/ pharma applications)
- 50 to 260 Degree Celsius (Non-bio/food/ pharma applications)
- 50 to 260 Degree Celsius (Non-bio/food/ pharma applications)
- 50 to 260 Degree Celsius (Non-bio/food/ pharma applications)

Coefficient of friction, static - ASTM D3028 -
Less than 0.16
Less than 0.15
Less than 0.16
Less than 0.10

Coefficient of friction, dynamic - ASTM D3028
Less than 0.13
Less than 0.11
Less than 0.13
Less

EXCELLENT RESISTANCE TO CHEMICAL CORROSION
EXCELLENT SOFT SEALING MATERIAL
HIGH BREAKDOWN VOLTAGE / DIELECTRIC STRENGTH
BIOSAFE AND INERT
LOW STATIC AND DYNAMIC FRICTION COEFFICIENT
HIGHLY NON STICK
HIGH WEATHERING RESISTANCE
HIGH TEMPERATURE RESISTANCE

Dimensions in mm

EXTRUDED RODS - 1 TO 5 Dia X Long Spools
6 TO 25 Dia X 1000 OR 2000 L
30 TO 200 Dia X 1000 L
PRESSED RODS - Available in the above sizes in 300 L
PRESSED SHEETS - 4 TO 100 Thick X 10002 / 12002 /15002
4 TO 100 Thick X 1000 X 2000 Special Production with MOQ
SKIVED SHEETS - 0.2 TO 6.O Thick X 1000 / 1200 / 1500 / 2000 Wide X Long Rolls
EXTRUDED HOLLOWS - 20 OD X 10 ID TO 150 OD X 75 ID , 1000 / 2000 L
PRESSED HOLLOWS - 175 OD X 75 ID TO 1200 OD X 1050 ID , 100 / 200 / 300 L
ONE-SIDE SODIUM ETCHED PTFE SHEETS - Available in all sizes
CUSTOM SIZES - Rods, Sheets, Hollows available on Request with MOQ
MICROMACHINED CIRCULAR PARTS - 0.5 TO 5 Dia
MACHINED CIRCULAR PARTS - 5 TO 1200 Dia

TECHNICAL DATA SHEET

PROPERTY â?? STANDARD - VALUE

Density - ASTM D792 - 2.16 - 2.20 g/ cubic centimeter
Water Absorption - ASTM D570 - Less than 0.01 %
Tensile strength - ASTM D638 -greater than or equal to 200 kg/ square centimeters
Elongation - ASTM D638 - greater than or equal to 300 %
Impact strength, Izod,23 Degree Celsius - ASTM D256 - 1.6 J/cm
Hardness - ASTM 785 - 50 - 55 Shore D
Compressive strength at 1% def. - ASTM D695 â?? 40 - 50 kg/ square centimeters
Thermal conductivity - ASTM D2214 - 0.2 W/m. K
Coefficient of Thermal Expansion, 25 to 100 Degree Celsius - ASTM E831 - 16 x 1-5 Degree Celsius -1
Volume resistivity, at 50% RH - ASTM D257 - greater than or equal to 1018Ohm cm
Surface resistivity , at 50% RH - ASTM D257 - greater than or equal to 1017Ohm
Dielectric strength - ASTM D149 - greater than or equal to 55 KV/mm
Safe Operating temperatures - 50 to 200°C(biological, pharma, food applications)
- 50 to 260°C(Non-bio/food/ pharma applications)
Coefficient of friction, static - ASTM D3028 - Less than 0.09
Coefficient of friction, dynamic - ASTM D3028 â?? Less than 0.05
Moisture / solvent absorption - Negligible
Combustibility - Non-combustible
Weather resistance - Excellent
Chemical resistance - Excellent, except for highly fluorinating agents

Few of types available -

CAT C16/3406 PISTON 168 4540 168-4540
CAT C16/3406 PISTON 221-2305
CAT C16/3406 PISTON 225-0115
CAT C16/3406 PISTON 393-8990 158-0446
CAT 3406E PISTON 192-8810 158-0446
CAT C18 PISTON 319-6715
CAT C18 PISTON 329-4511
CAT C32 PISTON 319-6716
CAT 3512/3516 PISTON 299-5204
DETROIT S60 PISTON 23527774 23521804
DETROIT S60 PISTON 23532465 23521802
DETROIT S60 PISTON 23530727 23521802
DETROIT S60 PISTON 23529367 23516681
DETROIT S60 PISTON 23529366 23516681
DETROIT S60 PISTON 23536674


For specification, price and more details please contact us.

Suitable after replacement market
High quality materials: Made of high-quality materials that meet or exceed the original requirements, after rigorous quality tests, they are durable, not easily damaged, and corrosion-resistant.

Price of product (USD price or FOB price) - Ask for price
Product Origin - South Korea
Minimum Order Size and Packaging details - 1 pieces / general export packing

Automotive Piston and Rings for all vehicles.

Motorcycle piston rings

Piston ring available for Honda, Yamaha, Kawasaki, Suziki, Vespa, Bajaj and TVS etc.

High Precision Steel Pipe for Gas spring Cylinder
Type:Seamless and Welded Steel Tube
Roughness 0.1-0.8ra
Material E195-E235,Q195-Q235,#10,#20,#45,SAE1010,SAE1020
Surface:Black/bright
Standard:DIN, GB, JIS, DIN 17175, DIN 2391, GB 5310-1995, GB/T 13793-1992, GB/T 3094-2000, GB/T 8163-1999, JIS G3101
Size :OD 3mm-140mm Thickness 0.5-20mm
Processing :Cold rolled /cold drawn
1. BK (+C) No heat treatment after last cold forming process.
2. BKW (+LC) After last heat treatment there is a light finishing pass (cold drawing)
3. BKS (+SR) After the final cold forming process the tubes are stress relieve annealed.
4. GBK (+A) After the final cold forming process the tubes are annealed in a controlled atmosphere.
5. NBK (+N) After the final cold forming process the tubes are annealed above the upper
Woven bag / wooden or crate carton/ Bundle Packing/ Plain end or vanished as per customer's request.
Usage: Gas Spring Cylinder

Suitable
Suitable after Replacement
High quality materials: Made of high-quality materials that meet or exceed the original requirements, after rigorous quality tests, they are durable, not easily damaged, and corrosion-resistant.

High-quality motorcycle engine piston kits for Bajaj, TVS and Hero motorcycles in 100?220cc applications. Suitable for African, Latin American and South Asian markets. Available in multiple model applications and specifications. Export-grade packaging, bulk quantities and private-label packaging available. Samples available on request.