Find Verified Titanium Bar Suppliers, Manufacturers and Wholesalers

Titanium bar.


Different for you requirements.

Titanium bar.

Wooden box.

We can supply dia.3mm-30mm
Grade 1-5
Standard: ASTM F136.

) Type: Seamless
Size range: O. D 6-108mm,
Wall thickness: 0.5-8mm,
Length: Max15000mm
2) Type: Welded
Size range: O. D100- 610mm
Wall thickness: 2-6mm
Length: 1, 000-2000mm

Type: forged/rolled
Sharp: round and square
Gr.1,Gr.2,Gr.3,Gr.4,Gr.5,Gr.7,Gr.9(Ti-3Al-2.5V),
-Delivery Time: according to your products.
-Terms: according to negotiation
-Payment: according to negotiation
-Package: accord with our export package.


Rod-Diameter:8-15.5
Bar-Diameter: 20-200
Length: as customer's requirements(Up to 6100mm).

Comm.:Gr5 titanium bar ASTM B348
Size: Dia. 12mm x 2000mm length
Packing: plywood box
Unit price: USD37/MT FOB XIAN AIR PORT
Delivery time: within 30days.


wrapped in Poly foam and then put in plywood box.

Titanium Bar/Rod
Type :forged /rolled
Shape:round ,square ,flat ,hex
Material: Gr1,Gr2,Gr3,Gr4,Gr5,Gr7,Gr9,Gr12
Standard :ASTM B348, AMS4928,ASTM F136, ASTM F67,ISO5832-2/3, ISO5832-11
Dia:1.0-300mm
Length:20-3000mm
Application:industrial and medical.




Wooden case.

Commercial pure titanium, GR1, 2, 3, 4, 3.0 - 50.8 mm, hot rolled, annealed, centerless ground surface.

1. Standard:ASTM B348,ASTM F67,ASTM F136,AMS 4928
2. Certificate:ISO 9001,SGS report,Material and test report.
3. Chemical requirements
NCHFeOAlVPaMoNiTi
Gr 10.030.080.0150.200.18/////bal
Gr 20.030.080.0150.300.25/////bal
Gr 30.050.080.0150.300.35/////bal
Gr 40.050.080.0150.500.40/////bal
Gr 50.050.080.0150.400.205.5~6.753.5~4.5///bal
Gr 70.030.080.0150.300.25//0.12~0.25//bal
Gr 90.030.080.0150.250.152.5~3.52.0~3.0///bal
Gr120.030.080.0150.300.25///0.2~0.40.6~0.9bal
4. Tensile requirements
gradeTensile strength(min)Yeild strength(min)Elongation(%)
ksiMPaksiMPa
1352402013824
2503454027520
3654505538018
4805507048315
513089512082810
7503454027520
9906207043815
12704385034518
5. Available Size
Products NamesDiamesions(mm)StatusGradeStandards
Titanium and Titanium Alloy Bars¦µ£¨30¡«220£©¡Á¡Ü3000ForgedGR1,GR2,GR3,GR4,
GR5,GR7,GR9,GR12,GR23ASTM B348
ASTM F67
ASTM F136
AMS 4928
¦µ£¨6¡«60£©¡Á¡Ü4000Milled.



Inner packing:waterproof paper
Outer packing:wooden case.

Titanium bar

Material: pure titanium and titanium alloy, for example: grade2, grade5 ( ti-6a1-4v)
1) titanium wire
2) titanium tubes, titanium pipes
3) titanium spraying targets
4) titanium rings
5) titanium fasteners, for example, titanium screws, titanium nuts, titanium washers
6) titanium parts
Furthermore, we can supply other titanium products, such as titanium sheets, titanium strips, titanium plates, titanium rods, titanium foils, titanium fasteners, surgical implant titanium, titanium screws, titanium tubes, titanium nuts, titanium bolts, titanium threaded rods, titanium washer, titanium targets, titanium parts and so on.

Pure titanium and titanium alloy, for example: grade2, grade5 ( ti-6a1-4v)

Titanium bar:
1) Standard:astm b348, ams 4928, astm f67, astm f136
2) Material:gr1, gr2, gr5/6al4v, gr23/6al4v eli.
3) Od:10-350mm.



Wooden cases.

We can supply gr1 gr2 gr5 gr7 gr9 gr11 titanium bars titanium rods and titanium plates

Titanium bar

We are a Titanium supplier in Taiwan.

We could Titanium raw materials, fasteners, tableware(business gifts/OEM), and customizing service.

The Titanium bars are Matte or polished surface.

Product brief introduction:
1.GR2 titanium block is one of titanium forging, which has low-weight, high specific strength, widely used in aorespace, chemistry,etc.
2.Payment terms: T/T, L/C.
3.Delivery time: 3-5 days.
Features of titanium blocks:
1.High specific strength. The density of titanium is 4.51g/cm�³, which is higher than that of aluminum but lower than that of steel, copper and nickel, but its strength is much higher than that of other metals. The screws made of titanium alloy are light and strong.
2. Good corrosion resistance. Titanium and titanium alloys are stable in many media, and titanium alloy screws can be used in various corrosive environments.
3. Good heat resistance and low temperature resistance. Titanium alloy screws can work normally in a high temperature environment of 600 �° C and a low temperature of minus 250 �° C, and can maintain their own shape without changing.
4. Non-magnetic and non-toxic. Titanium is a non-magnetic metal and will not be magnetized in a large magnetic field; it is not only non-toxic, but also has good compatibility with the human body.

1.Product description: The difference from chemically pure titanium is that industrial pure titanium contains a large amount of oxygen, nitrogen, carbon and various other impurity elements (such as iron, silicon, etc.), which is essentially a titanium alloy with low alloy content. Compared with chemically pure titanium, its strength is greatly improved due to the inclusion of more impurity elements, and its mechanical and chemical properties are similar to those of stainless steel (but still lower in strength compared to titanium alloys).

2.The characteristics of industrial pure titanium bars are:
low strength, but good plasticity, easy processing, stamping, welding, and good machinability; in the atmosphere, seawater, wet chlorine and oxidizing, neutral, weakly reducing media Good corrosion resistance and oxidation resistance are better than most austenitic stainless steels; but the heat resistance is poor, and the operating temperature should not be too high.

3.Industrial pure titanium bar is mainly used for working temperature below 350 â??, with little stress, but requires good plastic stamping parts and corrosion-resistant structural parts, such as: aircraft skeleton, skin, engine accessories; seawater corrosion-resistant pipes for ships, Valves, pumps and hydrofoils, parts of seawater desalination systems; chemical heat exchangers, pump bodies, distillation towers, coolers, agitators, tees, impellers, fasteners, ion pumps, compressor valves and diesel Engine pistons, connecting rods, leaf springs, etc.

Titanium alloy refers to a variety of alloy metals made of titanium and other metals. Titanium is an important structural metal developed in the 1950s. Titanium alloy has high strength, good corrosion resistance and high heat resistance. From the 1950s to 1960s, it was mainly the development of high-temperature titanium alloys for aeroengines and structural titanium alloys for airframes.

Hundreds of titanium alloys have been developed in the world, including 20 ~ 30 most famous alloys, such as Ti-6Al-4V, ti-5al-2.5sn, Ti-2Al-2.5Zr, ti-32mo, Ti Mo Ni, Ti PD, SP-700, ti-6242, ti-10-5-3, Ti-1023, BT9, BT20, imi829, imi834, etc

Titanium is an isomer with a melting point of 1668 â?? and a close packed hexagonal lattice structure below 882 â?? �± Titanium; It has a body centered cubic lattice structure above 882 Titanium. Based on the different characteristics of the above two structures of titanium, appropriate alloy elements are added to gradually change the phase transformation temperature and phase content to obtain titanium alloys with different structures. At room temperature, titanium alloys have three kinds of matrix structures, and titanium alloys are divided into the following three categories: ± Alloy ±) Alloy and Alloy.

Etermetal supply titanium and titanium alloy balls which are solid inside, not hollow ones. The popular material is cp grade 2 titanium and titanium alloy grade 5 ti 6Al-4V.

Sizes available: from diameter 1mm to 25mm, bigger sizes make to order


When the titanium balls are used as jewelry, drill hole service is often needed. The through hole diameter is usually from 0.8mm to 4.5mm according to buyer's design.

If the weight of the ball needs to be lighter, hollow titanium balls is suggested. When ordering, please tell us the diameter of the hollow ball you want, we will suggest the stock size for you. Please do not hesitate contact us for more information.

Advantage of Titanium

High Strength

Titanium strength ratio is better than other metals, components with high strength, good rigity, less weight can be made out of titanium.

Corrosion Ressistance

Compared with stainless steel, titanium alloys corrosion is better in moisture laden air, titanium greatly resists spot corrosion, acis corrosion and stress corrosion

High-Temperature Ressistance

Titanium can work in 450-500 for a long time, titanium alloy still prossesses high strength when working in 150-500

Good Thermal Conductivity

Titanium is non-magnetic metal, it can not be magbetized in large magnetic field, also titanium is toxic-free and compatibility with blood, there titanium is allpied in medical field

Details about Titanium Gr 2 billet

Standard

ASTM B348, AST M F67/136

Material

Gr 2

Diameter

0.05 ~ 400 mm

Length

50 ~ 6000 mm or as clients requirement

Feature

1. Low density and high strength

2. Excellent corrosion resistance

3. Good reisitance to effect of heat

4. Excellent Bearing to cryogenic property

5. Nonmagnetic and Non-toxic

6. Good thermal properties

7. Low modulus of elasticity