Characteristic:High temperature resistance, solvent resistance, and no residual adhesive, Excellent resistance to chemicals, chemicals and moisture resistance etc.
Feature
1.Available in variety of colors.
2.Sorting and packaging efficiently in production control.
3.Adds aesthetic look to your package
Application
Suitable for automobile, iron or plastic parts furniture surface high temperature paint protection, but also suitable for electronics, electrical appliances, varistors, circuit boards and other industries
Polyimide consisting of a polyimide film and silicone adhesive designed for high temperature masking applications, including the protection of gold edge fingers and edge connectors during wave soldering and reflow soldering processes within the PCB assembly industry. It is used in electrical insulation application meeting class H requirements.
Main Features:
. Thin and conformable enabling masking of uneven sufaces.
. Wide operaturing tempreture range up to 500��F.
. Excellent electrical insulation
. Remove clearly without adhesive residue after exposure to heat/chemical
Applications:
. Masking for protection of gold fingers and edge connectors during wave soldering and reflow soldering processes or solder dip process within the PCB assembly industry.
. Release surface in fabrication of parts cured at elevated temperatures.
. Widely used for electrical insulation on transformer, motor, coil, PCB masking and so on.
This tape is with a courier of PET film , coating silicone adhesive on one side of it. The tape can be used to protect the surface during powder spraying and curing process in industry. Due to an excellent feature of silicone adhesive, it will leave no residue on surface after peeling away.
Backing Film Thickness: 0.050,0.002 mm
Total Thickness: 0.080,0.002mm
Tensile Strength: 160N/25mm
Elongation: 70%
Adhesion to Stainsteel: 8.50N/25mm
Operating Temperature: 180 30Mins no residue.
Maximum width: 980mm
Minimum width: 3mm
Standard roll length: 33m, 50m, 66m.
4921 Packaging Tapes Suppliers
Short on time? Let Packaging Tapes sellers contact you.
Very soft copper foil backing and a unique electrically conductive pressure-sensitive acrylic adhesive.
? Conductive acrylic adhesive
? Supplied on a removable liner for easy handling and diecutting.
Copper tape is typically used for applications requiring excellent electrical conductivity from the application substrate through the adhesive to the foil backing. Common uses include grounding and EMI shielding in equipment, components, shielded rooms, etc. The copper foil backing is solderable and resists oxidation and discoloration.
For Copper Tape, typical shielding effectiveness (far field) is in the range of 60dB to 80dB (30 MHz to 1 GHz).
PTFE Packing With Chemical Resistance And Low Friction CoefficienT
PTFE packing or Teflon packing is a braided packing made of high purity PTFE (poly tetrafluoroethylene) yarn without soaking any PTFE dispersion and lubrication. PTFE packing is a kind of self-lubricating, chemical inert, non-toxic and non-hazardous material.
In addition, PTFE is called "king of plastic" and causes no pollution to the medium or liquid. More importantly, PTFE is known for its outstanding resistance to chemical attack, low friction coefficient, low water absorption and wide temperature tolerance (including cryogenic applications).
Due to the above advantages, PTFE packing is widely used in chemical processing, food processing and pharmacy.
COMMON SPECIFICATION
Maximum Temperature 280 °C
Pressure Rotating 1.5 MPa
Reciprocating 10 MPa
Valve 15 MPa
Velocity 5 m/s
pH 0 to 14
Density 1.41.6 g/cm3
Size Code (inch) 1/8 1/5 1/4 1/3 3/8 4/9 1/2 5/9 5/8 3/4 7/8 1
Cross Section (mm) 3 5 6.5 8 9.5 11 12.5 14 16 19 22 25
FEATURES
Long lasting performance.
Good flexibility and compressibility.
Tough interlock braid.
Superior chemical resistance. Resistant to the impact of water, steam, oil, fuel, solvent, acid and alkali.
Low friction.
APPLICATIONS
PTFE packing is ideal for general valve and pump (including rotating, centrifugal and reciprocating pump) applications in chemical processing, food processing, cryogenic applications, industrial gas processing and hospital.
White PTFE packing is applied in the valve.
PTFE packing for valve
Width:2.5cm/5cm/7.5cm/10cm(1"/2"/3"/4") or customized
Length:5m(16.4ft) or customized
Material:Cotton; Rayon,Nylon
Color:skin,yellow,black,white,red and so on
Elasticity:Stretch to 170%-180%
A. SG Tape( Structural Glazing Tape)
High density cross linked foam(300kg-350kg/mtr3) with pressure sensitive acrylic adhesive to withstand temperature until 100 Degree( Available Sizes 3x11mm 3x15mm, 3x19mm, 6x6mm, 6x9mm, 6x12mm, 6x15mm and 6x19mm- All tapes are 15mtr/Roll
Astro Plus + Color Fixer (500 ML)
How It Works.
You can use all types of clothes for ExampleCotton, Silk, Gorget, Terycotton, etc.
It Keeps Jari and Kasab Shining.
While using color fixer shining of clothes remains same permanently and it does not make your clothes bleed with color. Therefore it protects your clothes from bleeding.
After washing your clothes in a color fixer 3 to 4 times color of the clothes is fixed. Procedure for Getting Best Result to Fix Color On
Cloths: Take a Buket filled with cold (Normal) water up to the required level to soak clothes.
Add 1 Cap Color fixer liquid to the water. Soak Clothes in water for 15-20 minutes then, Directly dry them on the rope without dipping them in to. Do not use a dryer.
NOTICE: Soak Cloth one by one and not together.
You may reuse water for soaking other Clothes on the same day.
Keep out of reach of children and keep in a cool and dry place.
Voltage Supply: 12VDC-24VDC-24VAC-110VAC-220VAC
Signal Type: Multi (Continuous, Strobe, Flashing, Rotation)
Buzzer Tone Type: Continuous or Intermittent
Connection: Standard Cable
Consumption w/o load with buzzer: 1-2W
Buzzer Output: 127 dB
Protection: IP54 / IP65
Housing Material: ABS
Base Material: ABS
Mounting Option: Wall, Base
Color Options: Red, Yellow, Blue, Green, Orange, White
Luminous Source: LED
Lens Material: PC
Purline Tape (No Liner Tape)
XPE foam tape ( no liner)
Polyethylene foam tape serves as an excellent tape for bonding to textured surfaces together. Widely used in auto, HV industry,Â
work well as cushion tape, can dismiss noise, and temperature resistence.
people have higher requriments to personal computers with technology improving ,
which dricers computers getting thinner and lighter
our company as the leader for advanced technology and experienced R&D ability,
� which develop all kinds of No Liner Tape wholesale solution for the customers
Buy low price, high quality foam tape, PE foam tape, single sided foam tape, acrylic foam tape. You can choose our products. Our company is the leading factory. Warmly welcome new and old customers to visit and patronize!
Available in desired PAL-PANTONE colors, EKAPAH has a high-elasticity, thin mesh polyester netting carrier made of elastomeric resin.
Application Areas: In the base and wall joints.
In the isolation of wet spaces.
In the repair of static cracks.
Insulation of joints of precast or reinforced concrete roofs.
Advantages:
Easy to apply.
It provides a continuous insulation.
It is resistant to many chemicals.
Resistant to ozone and UV.
Method of Application:
Preparation of Application Surface:
Surfaces to be applied must be dry.
Surfaces must be clean, strong, free from carriers and loose particles.
Surfaces must be thoroughly cleaned from materials that reduce
adherence such as oil, grease, dirt, paint, cement grout, rust, mold oil,
salt vomit.
The surface should be roughened by mechanical methods if required.
EKAPAH tape is mounted on the joint or crack with a cement based
adhesive and after the adhesive is dried, waterproofing procedure is
applied on the surface. Cracks wider than 3 mm must be filled with
suitable fillers prior to application.
Packaging and Storage:
Packing: White box in package (10 rolls / each roll 50 mt) 500 mt
Product Code:
1. EKAPAH 120 PF : 120 x 70 mm
2. EKAPAH 150 PF : 150 x 100 mm
Shelf Life: 24 months - in dry and cool environment, in unopened
original packaging.
transfer tape for rhinestone/rhinestuds motif setting, available to supply with glue adhesiveness in weak, medium and strong to meet different requirement of the motif design. Contact us for further information or send us your inquiry.
Name
Custom logo printed RFID UHF Card
Materials
PVC, PET, PETG, TESLIN, ABS...
Size
CR80, 85.6*54mm, thickness: 0.80mm or be advised
Craft
Heating laminating
Type
Passive
Frequency
860~960mhz or be adjusted depends on different zone
Application
Access control, payment and so on.
Description: Brown Perforated Kraft Paper Rolls
Product details:
white/brown color
Round/triangle holes: 5mm diameters per hole
the base paper for perforating is kraft paper with recyclable feature, cheap but good quality
Base paper gsm:45-120gsm(Recycled Kraft Paper/Wood Free Paper)
Roll width: our perforating machines are 2320mm(91inches)
Roll weight:20-50kgs small roll for garment manufacturers, >300kgs per roll for paper distributors Related products:HDPE Film, plotter paper,interleaving tissue paper Application:CAM CAD Cutting Table Underlayer with HDPE Film
Certificate: FSC SGS
Description:
Brown Perforated Kraft Paper Rolls
Product details:
white/brown color
Round/triangle holes: 5mm diameters per hole
the base paper for perforating is kraft paper with recyclable feature, cheap but good quality
Base paper gsm:45-120gsm(Recycled Kraft Paper/Wood Free Paper)
Roll width: our perforating machines are 2320mm(91inches)
Roll weight:20-50kgs small roll for garment manufacturers, >300kgs per roll for paper distributors
Related products:HDPE Film, plotter paper,interleaving tissue paper
Application:CAM CAD Cutting Table Underlayer with HDPE Film
Certificate: FSC SGS
4921 Packaging Tapes Suppliers
Short on time? Let Packaging Tapes sellers contact you.
