Introduction:
Single facer line is also called 2-layer corrugated paperboard production line. The Single facer Line is composed of Paper Roll stand, Single facer machine, circumvolve paper cutting machine. To use the web paper material single face machine production line, producing and cutting single face corrugated paper as required sizes, it forms the corrugated board with no need drying. This unit has the advantages of reasonable fabric, advanced technology, high quality of production, high efficiency, low workmanship, operation and maintenance easy. This is the preferred equipment for the production of corrugated cardboard of the cardboard factories.
Technological Parameter:
Working Width 1200mm 1400mm 1600mm 1800mm
Heating method Steam heating
Design speed 100m/min
Economical speed 60-80m/min
Compress-air pressure 0.4-0.9MPa
Flute type Standard flute UV Flute
Standard spec. A,B,C,E,F
For other type and model, we can produce as customers requirement.
Specification:
Max. machine speed 150m/min
Economic speed 120m/min
Max. working width 1800mm
Max working steam pressure: 1.0-1.3Mpa
Steam temperature 160â??210 centigrade
Power requirements: 380V, 50Hz
Diameter of corrugated roller 320mm
Diameter of Press roller . 360mm.
Diameter of preheater roller 360mm
Diameter of Glue roller 242mm
Diameter of doctor roller 118mm
Machine Introduction:
--Design Speed: 150m/min
--Corrugated roller: �?320mm(small differences according to corrugated type), pressure roller:�?360mm, preheat roller:�?360mm
--Fingerless vacuum suction type single facer, the upper and lower corrugated roller made of 48 CrMo alloy steel, with harted treatment,the hardness is above HRC58o-60o.The surface is well treated by grind and plated chrome and tungsten carbide coated.
--Using negative pressure type design helps the medium paper to press evenly and closer to the surface of corrugating roll to have perfect forming. And also get even gluing on the flute tip to have perfect laminating of the single facer.
--Quick change rolls in 15 minutes, while replacing the corrugated rolls, the whole complete set of additional rolls with cassette is delivered into he machine by the carriage and matched with the hydraulic motor to be fixed on the base of the machine by hydraulic system. Quickly and easily complete the corrugated roller replacement.
--The corrugating roller is made of 48CrMo high quality alloy steel, using heat-treatment. Surface plates hard chromium after grinding.
--The corrugating rolls, pressure roll, and glue roll are adopted with High stability of the airbag control system, also with pneumatic control buffer effect.
--Adopt Glue width motorized dividing to match the paper width. Idle running motor for glue applicator roll to avoid glue dry. Adjustment for gap between glue roller and doctor roller by electric. Digital read out for the gap between glue roll and doctor roll.
-- The moveable type glue unit is convenient to clean and maintain.
-- Easy operation control system. Touch screen with colorful drawing displays operation state, easy and simple to handle.
--Built-in pre-conditioner with proportional spraying device for the medium m
Introduction of the machine:
MJZXJ-1 model Automatic Folder gluer machine is composed of feeding part, glue and folding part, stacker part, speed controlled by PLC, paper width is adjusted by Touch PC, machine operation is easy and accurate, machine with automatic paper feeding function, automatic glue and fold function, automatic counting, automatic stacking and double conversion operation, the normal speed is 160pcs/min, Max. speed can be 220 pcs/min, this machine is your best choose which is energy-efficient and environmental protection.
Function and characteristic:
1. Automatic carton folding and at same time to finish the tape paste which is save time and labor force
2. Can be used for different size cartons and size adjust is simple and fast.
3. Machine run is stable and reliable, packing result is strong and nice.
4. Machine operation is simple and easy for maintenance.
5. Automatic collimator angle, 180 degree correction, effective corrective the carton appear fork and tail phenomenon.
Machine parameters: (Total 8tons):
Model MJZXJ-1 8020 1024 1224 1424
Max. Size 800*2000mm 1000*2400mm 1200*2400mm 1400*2400mm
Min. Size 170*470mm 260*650mm 260*650mm 260*650mm
Installation area 3200*11500mm 3400*12500mm 3600*12500mm 3800*13500mm
Power Required 15.0KW 15.0KW 15.0KW 15.0KW
Max. Working Speed 220m/min 220m/min 220m/min 220m/min
Normal working Speed 200m/min 200m/min 200m/min 200/min
Machine Weight 6800kg 7500kg 7500kg 8000kg
Note: If you need any other size, kindly feel free to let us know. We can make the machine based
on your sizes.
Characteristics:
1. Easy and reliable operation system.
2. Novel design of the whole machine.
3. Fast changing sizes.
4. Can working good when the carton or box in special shape.
5. Use imported belt and famous brand electrical parts.
Technological Parameters:
Model MJZXJ-3
Max. Size of product 1800*1100mm
Normal working speed 6000-10000boxes/hour (based on double working)
Mechanical Speed 56m/min
Machine power 2.7kw
Machine Size 2.2*2.4*1.3m
Note: We can produce different size machine as customerâ??s requirements.
The main motor power parameters:
No. Name Type No. Add
1 Main motor GH-28-S 1.5kw 1 Shanghai Fulong
2 Grinding motor 80M1-2 0.55kw 2 Taiwan Reyong
3 Dust fan CET-75 1 Taiwan, Oute
4 Pressing machine 61K180RGU-CF 1 Taiwan, Oute
Main Electrical parts:
No. Name Brand QTY Origin
1 Photoelectric switch Omron 1 Japan
2 Key switch Tend 1 Taiwan
3 Counter Baile 1 Shanghai
4 Abrupt stop Schneider 1 France
5 Indicator Schneider 2 France
6 According to the knob Schneider 1 France
7 Circuit breaker Schneider 2 France
8 Relay Omron 3 Japan
9 Ac contactor Schneider 2 France
10 Speed control unit Schneider 1 France
11 Frequency converter Delta 1 Taiwan
Characteristics:
1. The feeding unit of the machine has two paper board stack to hold AB two pieces of papers, which helps to improve the production efficiency. Below adopt the air sucking structure, which is conducive to improve transport efficiency and accuracy.
2. Connecting unit adopts hot melt adhesive, servo positioning, ensuring accurate register and high precision.
3. Folding unit adopts manual fold, which resolve the problem of hard to confirm fold place. The overlap margin can be controlled effectively.
4. The machine can be operated by two persons: One stacks papers and collect finished job, the other fold the papers and feed them into compressing belt. The whole machine is of easy operation even for green hand.
Technological Parameters:
Model RYH-2400A RYH-2900A RYH-3300A
Max. Paperboard size (Single piece) 1200*1200mm 1440*1200mm 1650*1650mm
Min. Paperboard size (Single piece) 500*300mm 500*300mm 750*450mm
Suitable paperboard A,B,C,D,E, F corrugated paperboard &
< 6mm 5-layer corrugated paperboard.
Machine Speed 0-3200pcs/hour 0-3200pcs/hour
Machine size 3800*3200*1400mm 4300*4000*1400mm 4700*4500*1400mm
Machine power 9kw 9kw 10kw
Machine Weight 2500kg 3000kg 3500kg
Note: Any other sizes you require, we can make for you.
Configuration List:
Name Brand
Button Schneider
Contactor Schneider
Servo motor Beijing Zhongchuang
Inverter Taiwan Guangbao
PLC Delta
Touch Screen Delta
Sensor Omron
Bearing FKG, England
Bearing Ningbo LNG
Main motor Shanghai Saini
Reducer Taiwan Mingchun
Micro motor Shanghai Zhongda
Feeding belt RAPPLON, Swiss
Pressing belt SIEGLING, Germany
Conveyor belt RAPPLON, Swiss
Cylinder Taiwan Xinyang
6836 Packaging Machinery Suppliers
Short on time? Let Packaging Machinery sellers contact you.
Characteristics:
1. The feeding unit of the machine has two paper board stack to hold AB two pieces of papers, which helps to improve the production efficiency. Below adopt the air sucking structure, which is conducive to improve transport efficiency and accuracy.
2. Connecting unit adopts hot melt adhesive, servo positioning, ensuring accurate register and high precision.
3. Folding unit adopts manual fold, which resolve the problem of hard to confirm fold place. The overlap margin can be controlled effectively.
Technological Parameters:
Model RYH-2400B RYH-2900B RYH-3300B
Max. Paperboard size (Single piece) 1200*1200mm 1440*1200mm 1650*1650mm
Min. Paperboard size (Single piece) 500*330mm 500*330mm 750*450mm
Suitable paperboard A,B,C,D,E corrugated paperboard &
< 6mm 5-layer corrugated paperboard.
Machine Speed 0-3200pcs/hour 0-3200pcs/hour 0-3200pcs/hour
Machine size 9600*4500*1400mm 9600*5300*1400mm 10660*7330*1400mm
Machine power 9kw 9kw 13kw
Note: Any other sizes you require, we can make for you.
Configuration List:
Name Brand
Button Schneider
Contactor Schneider
Servo motor Beijing Zhongchuang
Inverter Delta
PLC Delta
Touch Screen Delta
Sensor Delta
Bearing FKG, England
Bearing Ningbo LNG
Main motor Shanghai Saini
Reducer Mingchun
Micro motor Xiamen Jingyan
Feeding belt RAPPLON, Swiss
Pressing belt SIEGLING, Germany
Conveyor belt RAPPLON, Swiss
Cylinder Taiwan AirTac
Features:
1. Servo control system, with PLC controller (Germany Siemens). Bearing use NSK brand. All electrical parts are famous international brands.
2. High efficiency, 20-25 bales per minute.
3. Saving labors, increase yield, easy maintenance.
4. Cost saving, save more than �¼ cost than using the PP packing strap.
5. Easy operation and safely, person without any working experience can operate it after simple education.
6. High efficiency and stable packaging performance, can combine with the high speed full automatic folder gluer and stitcher machines.
Technological Parameters:
Model RYBD-1500
Packing size (A) 450 ~ 1500mm
Packing size (B) 200 ~ 1500mm
Packing size (C) 50 ~ 250mm
Packing Capacity 23 �± 2packs/min
Packing material PE String (28#)
Machine size (L*W*H) 3000*2500*1980mm
Working pressure 0.6MPa
Total Power 3.5KW
Introduction:
Single Facer is the main machine for producing the corrugated paperboard. MJSF-210C model single facer is suitable for the small or middle factory use. Good machine is directly effecting the quality of the corrugated paperboard.
HS CODE: 844180900
Main Technological Parameters:
Model Name MJSF-210C
Max. Speed 40m/min
Economical Speed 25-30m/min
Width 1400mm, 1600mm, 1800mm
Flute type A,B,C,E,F (can be chosen or required by customer)
Heating method 1)Electrical heating
2) oil heating
3) Steam heating
Main motor power 7.5kw
Diameter of roller 219mm
Machine body thickness 70mm
Roller material 45# Steel, heat treated.
Introduction:
Single Facer is the main machine for producing the corrugated paperboard. Vacuum suction model single facer has very good production precision. The choose of the machine is directly effecting the quality of the corrugated paperboard.
Structural features:
Design speed: 100m/min
Effective width: 1000mm ~ 2500mm
Using suction hood structure, with a strong high pressure blower, suction with a silencer. Gas supply and electrical control centralized in the same operation panel, not less than 1.5 meters from the hosts, operating side cover closed.
Cast iron wallboard, siding thickness of 130mm. Universal Joints.
Corrugated roller material adopt 48CrMo alloy steel, after quenching, intermediate frequency quenching, surface polishing corrugated main roller diameter 280mm surface hardness more than HRC58 degrees,airbag loading. The key parts of the tile and pressure roller bearings high temperature bearings Wafangdian production.
Pressure roller 284mm, Surface grinding and chrome plated; airbag load, the material is medium carbon steel 45, quenched and tempered.
Pneumatic control for glue, back glue glue roller diameter 215m. Engraved polishing surface after pit style textured machined hard chrome plating process, scraping the roller surface after polishing hard chrome plating.
Corrugated roller, pressure roller materials provided by the Central Plains Steel, corrugating unilateral 0.15mm high, the pressure roller unilateral 0.075mm high.
preheat roller with Day steel production seamless Steel Tube 320mm.
Using four sets of electric heating pipe heating oil, heating fast, no furnace, automatic temperature control and two groups control.
Conducting oil powerful closed-loop circulation system pressure is low, no leakage, heat recycling, less heat loss.
Installed in the special structure of the heat roller churning ring, roller heat evenly, corrugated good shape.
Conducting oil high thermally conductive, carrying high-calorie, simple production process, low investment, for small carton production.
Technological Parameters:
Working Width 1200mm 1400mm 1600mm 1800mm
Heating method Oil heating & Electrical heating
Design speed 80m/min
Economical speed 40-50 m/min
Compress-air pressure 0.4-0.9MPa
Flute type Standard flute UV Flute
Standard spec. A,B,C,E,F
For other type and model, we can produce as customer's requirement.
Corrugated roll diameter (mm) 280
Wall Thickness (mm) 130
Type Vacuum Absorb
Roller material 48CrMo alloy, Heat treated
Machine Size (mm) 3300*1300*1700 3550*1300*1700 3800*1300*1700 4050*1300*1700
HS CODE: 844180900
Introduction:
Single Facer is the main machine for producing the corrugated paperboard. Vacuum suction model single facer has very good production precision. The choose of the machine is directly effecting the quality of the corrugated paperboard.
HS CODE: 844180900
Characteristics:
1. Cover vacuum suction.
2. Corrugating roll is made of high quality alloy steel 48CrMo, the surface is medium-frequency quenched and chrome-plated. Hardness can reach HRC55~60, which ensures good wear-resistance and long life service.
3. Independent transmission box, transmit by shaft coupling.
4. Glue roll is lifted and lowered pneumatically.
5. Independent glue clean device and electric glue-separate board to control the width of glue.
6. Manually regulate or electrically regulate the display device.
7. Lubricated by high temperature lubricate grease.
8. Surface of all dancing rolls and preheating rolls is grinded and chrome-plated.
9. Pressure roll is medium- frequency quenched and chrome-plated.
10. Width 1000mm~2000mm.
11. Preheating rolls, pressure rolls and corrugating rolls all meet the National Standard of Pressure Vessel. Working pressure is 1.1MPa.
Main Technological Parameters:
MJSF-280V
Working Width 1200mm 1400mm 1600mm 1800mm
Heating method Steam heating
Design speed 100m/min
Economical speed 80 m/min
Compress-air pressure 0.4-0.9MPa
Flute type Standard flute UV Flute
Standard spec. A,B,C,E,F
For other type and model, we can produce as customerâ??s requirement.
Corrugated roll diameter (mm) 280
Wall Thickness (mm) 130
Type Vacuum Absorb
Roller material 48CrMo alloy, Heat treated
Machine Size (mm) 3300*1300*1700 3550*1300*1700 3800*1300*1700 4050*1300*1700
Structural features:
The use of suction hood structure, with high - pressure strong fan. The air suction is equipped with sound attenuation device, and the air source and electrical control are concentrated in the same operating cabinet. The distance from the main machine is not less than 1.5m.
The operating side is fully closed and covered. Machine base and wallboard cast iron structure, wallboard thickness of 130mm. Universal joint drive.
The corrugated roller material is made of 48 CrMo alloy steel, after tempering, medium frequency quenching, surface polishing, corrugated roller diameter 293 mm, surface hardness above HRC60 degrees (optional, tungsten carbide roll and surface hardness HV1200). Key parts of the tile roller, pressure roller bearings using wafangdian high temperature bearings.
The pressure roller 320 mm, surface grinding and chrome plated treatment; The cylinder is controlled to move up and down, and the material is medium carbon steel no.45, tempering and tempering treatment (with buffer device).
The pneumatic control to glue back glue, glue spreader with 25 215 mm diameter surface after polishing line after pit type checker processing hard chromium plating processing, scraping the rubber roller surface after grinding hard chromium plating processing
Raw materials of corrugated roller and pressure roller are provided by zhongyuan special steel co., LTD. The corrugated roller has a top middle height of 0.15mm on one side and a middle height of 0.075mm on the other side. Add limit device.
The preheat roll diameter of 600 mm.
General technical parameters:
1. Working width:1000-2200mm
2. Operation direction: left or right (according to the customer's workshop)
3. The design speed: 120 m/min, temperature range: 200-260 -4. Corrugated (UV or UVV)
Roller diameter parameters:
1. Corrugated roller diameter
2. 293 mm diameter, pressure roller, 320 mm
3. Glue roller diameter
4. 215 mm, preheater diameter: 600 mm
Power motor parameters:
1. Main drive motor: 11KW rated voltage: 380V 50Hz continuous (S1) working system
2. Suction motor :11KW rated voltage: 380V 50Hz continuous (S1) working system
--Fingerless vacuum suction type single facer, the upper and lower corrugated roller made of 48 CrMo alloy steel, with harted treatment, the hardness is above HRC58o-60o.The surface is well treated by grind and tungsten carbide coated.
--Using negative pressure type design helps the medium paper to press evenly and closer to the surface of corrugating roll to have perfect forming. And also get even gluing on the flute tip to have perfect laminating of the single facer.
--Quick change rolls in 15 minutes, while replacing the corrugated rolls, the whole complete set of additional rolls with cassette is delivered into he machine by the carriage and matched with the hydraulic motor to be fixed on the base of the machine by hydraulic system. Quickly and easily complete the corrugated roller replacement.
--The corrugating roller is made of 48CrMo high quality alloy steel, using heat-treatment. Surface plates hard chromium after grinding.
--The corrugating rolls, pressure roll, and glue roll are adopted with High stability of the airbag control system, also with pneumatic control buffer effect.
--Adopt Glue width motorized dividing to match the paper width. Idle running motor for glue applicator roll to avoid glue dry. Adjustment for gap between glue roller and doctor roller by electric . Digital read out for the gap between glue roll and doctor roll.
-- The moveable type glue unit is convenient to clean and maintain.
-- Easy operation control system. Touch screen with colorful drawing displays operation state, easy and simple to handle.
--Built-in pre-conditioner with proportional spraying device for the medium moisture and temperature adjustment.
Technological Parameter:
Max. machine speed 180m/min
Economic speed 150m/min
Max. working width 1050mm ~ 2250mm
Max working steam pressure: 1.0-1.3Mpa
Steam temperature 160 ~ 210 Degree
Power requirements: 380V, 50Hz
Diameter of corrugated roller 320mm
Diameter of Press roller . 360mm.
Diameter of preheater roller 360mm
Diameter of Glue roller 242mm
Diameter of doctor roller 118mm
Introduction:
Single Facer is the main machine for producing the corrugated paperboard. Vacuum suction model single facer has very good production precision. The choose of the machine is directly effecting the quality of the corrugated paperboard.
HS CODE: 844180900
Structural feature:
1) Adopt suction hood structure, matched high pressure powerful fan. Suction with silence, gas supply and electrical control cabinet to focus on the same operation away from the host is not less than 1.5m.Operating side closed full cover.
2) The base and wallboard cast iron structure, the thickness of wallboard is 200mm.Independent gear box, universal joint transmission structure.
3) Corrugated roller material adopt 48CrMo alloy steel, diameter of corrugated roller main roller 320mm Quenched, CNC grinder grinding, IF quenching, surface finish. Bearing of corrugated roller and pressure roller key parts adopt Timken bearings produce heat.
4) Pressure roller 324mm surface grinding and dealing with chrome, cylinder control moves up and down No. 45 carbon steel material, quenching (with cushioning devices).
5) Glue wallboard adopt skateboard-type structure, pneumatic control glue to glue back diameter of glue roller is 242mm, engraved polished surface after a 25-line pit style textured machined chrome plated After scraping the roller surface polished hard chrome plated.
6) Glue part can remove overall, exchange glue roller quickly and convenient.Electric compartment plastic, electric adjustment amount of glue Digital.
7) Material of corrugated and pressure is provided by zhongyuan tegang,corrugated roller side 0.15mmon high, pressure roller side 0.075mm high.Add limited device.
8) Corrugated roller and pressure roller adopt air spring pressure device, and working stable .
9) Preheat roller adopt seamless steel pipe produced by tiangang 400mm All metal hose connection.
Technical parameters:
1. Effective width: 1800mm
2. Operate direction: left or right(Determined in accordance with the customer's facility)
3. Design speed: 150m/min, Running Speed: 120m/min.
4. Range of temperature: 160 ~ 180â??
5. Air source: 0.4 ~ 0.9Mpa
6. Steam pressure: 0.8 ~ 1.3Mpa
7. Corrugate flute (UV type or UVV type)
Roller diameter parameters:
1. Diameter of corrugated roller: 320mm
2. Diameter of pressure roller: 324mm
3. Diameter of glue roller: Â 242mm
4. Diameter of preheat roller: 325mm
Powered motor parameters:
1. Main drive motor: 18.5KW rated voltage: 380V 50Hz
continuous (S1) working system
2. Suction motor: 11KW rated voltage: 380V 50Hz
continuous (S1) working system
3. Adjust glue reducer: 100W rated voltage: 380V 50Hz
short (S2) working system
4. Adjust glue gap motor: 250W rated voltage: 380V 50Hz
short (S2) working system
5. Glue pump motor: 2.2KW rated voltage: 380V 50Hz
continuous (S1) working system
Structural features:
1) Five sections using high-strength belt conveyor, Frequency loop control, Precision Auto Points, smooth delivery, rapid separation and delivered to the Ministry of basket gantry.
2) Sun gear press paper does not do damage to the cardboard. Carbon fiber press paper is extremely resistant.
3) Block car with the order structure, automatic adjustment, you can order the size of the fragmented, staggered stacking.
4) Ministry basket out feed nylon plastic caterpillar output, does not damage the backing paper.
5) Elevator servo control gondola lift, rational counterweight structure, optimal energy efficiency, After the basket out feed, Transfers power from the platform to the next step of the crawler.
Type MJDM-3-1800
The largest collection of paper width 1850mm
Collection of paper length Standard: 500 ~ 3500mm(Can be customized)
Logistics roller Can be configured according to the order
Lateral transport mode Modules belt
Stacking height 1700mm
Maximum production line speed 200m/min
Dimensions Length width height: 20000 3200 2800mm
Total weight 12T
â?¢ System parameters
Position machine Taiwan WEINVIEW or MCGS TONTEK Color touch screen10.4
Lower machine Performance of Taiwan DELTA Series PLC
Lift Control AC servo controller
Frequency machine Taiwan delta
Low-voltage electrical CHNT, Schneider Low-voltage electrical
â?¢ Power Parameters
Conveyor roller drive RV reducer: 3kw 5
Horizontal driving basket Gear reducer: 3KW 2
Paper stop car drivers RV reducer: 0.75KW
Lifting drive Worm Reducer: 15KW
Total power About 30 KW
Electrical appliances Configuration:
No. Name Type brand QTY company remark
1 Air Switch 2 CHNT
2 Frequency machine 5 delta (Taiwan) 3.7KW
3 Frequency machine 1 delta (Taiwan) 2.2KW
4 Frequency machine 2 delta (Taiwan) 15KW
5 PLC 1 delta (Taiwan) series PLC
6 Contactor Schneider
7 Switching Power Supply NES Series 3 MW (Taiwan) DC24V
8 Fan 6 JY-FAN (China )
9 Indicator XB Series 8 Schneider (France)
10 Switch ZB Series 7 Schneider (France)
11 Emergency stop switch ZB Series 5 Schneider (France)
12 With lamp reset button ZB Series 12 Schneider (France)
13 Without lamp reset button ZB Series 9 Schneider (France)
14 Two reset operation lever knob 3 Schneider (France)
15 HMI 10.4Inch 1 WEINVIEW (Taiwan)
16 Encoder E-004A 5 NEMION (Japan)
13 Encoder E-003 1 NEMION (Japan)
14 Photoelectric switch E-035A 3 OMRON (Japan)
15 Trip switch XCE-145 6 TEND (Taiwan)
16 Photoelectric switch E-069 1 OMRON (Japan)
17 Bell 1 (China)
18 Three-color lights 1 (China)
19 Red lights 1 (China)
20 Pull the emergency switch 1 (China)
Structure:
Gantry stacking. The change time is 5 seconds. It can count automatically, cross output automatically and change orders automatically
Synchronize with the management system, order management, centralized management, automatic change of orders without slowing down
Tracked stacking platform, AC servo control lifting, stable and orderly stacking
When stack to the set quantity, automatically output the paperboard under inverter control
Back baffle AC servo control positioning, automatic, fast and accurate adjustment when changing orders;
Back baffle can automatically move, suitable for small order stacking
With independent electrical case, electrical case run under no-dust environment
Color touch screen display, convenient for field operation
Fully automatic operation control, improve efficiency, save manpower, reduce the labor intensity of operators
Main technological Parameters:
1. Max. working width: 2200mm
2. Operation direction: Based on your line
3. Working speed: 150m/min
4. Max. stack height: 250mm
5. Max. stack length: Up-layer 3500mm, Down-layer: 2800mm.
Main Parts sourcing:
Name of part Brand and origin Material or Model
RV Reducer Taiwan Peaken
Inverter Delta
Proximity switch OMRON
PLC Delta
Touch Screen Taiwan WEINVIEW
Rotary Encoder R&D
Contactor Schneider
Steel body Tangshan 12# U-bar, 14# U-bar, Square steel
Conveyor Shanghai PVC Conveyor
Pneumatic part JAPAN SMC or Taiwan AirTAC
Regularly technical parameters:
1. Effective working width: 1800mm
2. Operation direction: left or right determined to the customers factory
3. MAX. working speed: 200m/min
4. The maximum stack height: 1700mm
5. The MAX. stacking length: 3500 mm
6. Equipment size: Lmx12*Wmx2.2*Hmx1.9
Mainly purchased parts, raw materials and origin:
Name of main parts Brands or place of origin Material and type
RV reducer Zhejiang fenghua
Feeding drive Taiwan delta Frequency
Proximity Switch japan OMRON
PLC Taiwan delta
HMI Taiwan's Wei Lun or Kunlun-state
Rotary encoder Wuxi ruipu
Contactor France Schneider
Profiles Tiangang or tanggang NO. 12Channel. NO.14·Channel. Square steel
Conveyor Flat belt Shanghai PVC Conveyor
Pneumatic components Zhejiang sonor CSM
Roller shaft Tiangang steel seamless pipe
MJNC-6-120 Single Facer Paperboard Cutter machine is used for cutting the 2-layer corrugated paperboard to the sizes as requirement, at the same time, booking the paperboard with order quantity. The machine is composed by feeding part, vertically cutting part, transport part, and booking part. It is suitable for the flute B, E, F, G, single cardboard, or small flute 3-layer paperboard.
Specification:
--Computer system to keep 200 orders, can easy add, change, save orders.
--Electrical adjust the slitting knife, and Computer Control adjust the transverse knife.
--Man-machine conversation system NC.
--Cross-cutting machine adopts the structure of the set speed steel spiral knife, transmission of high precision, long life pump automatic cycle lubrication.
--the host base and wall use ferrosteel, and strong vibration resistance.
--Servo controller from KEB Germany for motor driver,10.4 inch colorized touch screen made in Taiwan Eview .
--Auto calculate delivery to the stacking output board, the maximum accumulation of 1.3 m in length.
Machine Introduction
Our RC BOX MAKER is designed by our Senior Technical Engineer Mr. Mohammad Baliha. He has more than 12years experience and high-technology in folder gluer industry. The machine collects all the advantages of worlds folder gluer, mainly insert many advanced technology of Langston USA, running speed can be 300m/min with good result carton. Machine use full automatic computer control, high quality belt, reasonable design, the glue finishing of carton is excellent.
The main application is on food and beverage, laminating boxes, industrial products, for gluing process of packing cartons. Replace manual folder gluing and semiautomatic folder gluer, with low cost, high efficient, stable quality. Economize on manpower in quantity. It is the first choice for middle and big size carton factories.
Our RC Box Maker can be designed to connect with your exist Flexo printing slotting machine to be ON-LINE Flexo Folder Gluer.
Main Technological Parameters
Model
Item RC2000 RC2400 RC2400L RC2800
Max. Sheet Size 2000*900mm 2400*900mm 2400*1200mm 2800*1200mm
Min. Sheet Size 800*360mm 800*360mm 800*360mm 800*360mm
Applicable Paper 3,5,7-layer Corrugated Paperboard A, B, C, E, F flute
Max. Belt Speed 320m/min 320m/min 320m/min 320m/min
Design Speed 300pcs/min 300pcs/min 300pcs/min 300pcs/min
Noise ~85dB(on the level of 1.5 meters high at the operator side)
Glue unit Glue gun/ Gluing wheel
Total Power 43.5kw 43.5kw 45.5kw 48.5kw
Air Source 0.6~1.0Mpa 0.6~1.0Mpa 0.6~1.0Mpa 0.6~1.0Mpa
Machine Size 14*4.1*2.45m 14*4.5*2.45m 14.5*4.5*2.45m 14.5*4.9*2.45m
Power Supply 380V,50HZ, 3 phase 4 line.
Introduction:
Single facer line is also called 2-layer corrugated paperboard production line. The Single facer Line is composed of Paper Roll stand, Single facer machine, circumvolve paper cutting machine. To use the web paper material single face machine production line, producing and cutting single face corrugated paper as required sizes, it forms the corrugated board with no need drying. This unit has the advantages of reasonable fabric, advanced technology, high quality of production, high efficiency, low workmanship, operation and maintenance easy. This is the preferred equipment for the production of corrugated cardboard of the cardboard factories.
Technological Parameter:
Working Width 1200mm 1400mm 1600mm 1800mm
Heating method Steam heating
Design speed 100m/min
Economical speed 60-80m/min
Compress-air pressure 0.4-0.9MPa
Flute type Standard flute UV Flute
Standard spec. A,B,C,E,F
For other type and model, we can produce as customers requirement.
6836 Packaging Machinery Suppliers
Short on time? Let Packaging Machinery sellers contact you.
