Feature:
Steel wire strength.filler protect tube fiber.steel tape armord
Good ultra violet radiation resistant property
Double sheath ,Good moisture-resistance.
Application:
Adopted to Outdoor distribution;
Suitable for aerial duct and buried method
Long distance and local area network communication.
Feature:
Non-metal strength member;
Filler protect loose tuber fiber;
Non-metal strength has an excellent anti-electromagnet ability.
Application:
Adopted to Outdoor distribution;
Adopted to trunk power transmission system;
Access network and local network in high electromagnetic
Feature:
Excellent flexibility and bending performance;
Excellent mechanical and environmental,
performance guaranteed by accurate excess fibre length;
Larger fibre count;
Excellent crush resistance due to the PSP and
the parallel steel wires.
Application:
Access network (especial in FTTC and FTTB),
interoffice connection and CATV network.
Product description of simplex tactical fiber optic cable for broadcast television communication
In the gyts cable, single-mode/multimode fibers are positioned in the loose tubes, while the loose tubes strand together around the strength member into a compact and circular cable core.The strength member would be covered with polyethylene (pe).The water-blocking materials are distributed into the interstices of the cable core.Then the cable is completed with a pe sheath.
?product features of simplex tactical fiber optic cable for broadcast television communication
1.Excellent mechanical and temperature performance.Critical protection to fibers.
2.Excellent ultraviolet prevention with pe sheath.
3.Excellent crush resistance and flexibility.
4.The following measures are taken to ensure the water blocking performance of the cable:
- single steel wire strength member used as the central strength member
- special water-blocking filling compound in the loose tube
- 100% cable core filling
Product Description
1) Gel filled mulit loose tube provide good protection for the coating fiber
2 Steel wire/FRP as central tension strength
3) Good ultra violet radiation resistant
4) Double sheath and conrrugated steel tape armored..Good moisture-resistance.
5) Single mode G652D fiber type .
APPLICATION
1) Adopted to Outdoor Direct buried,Aerial, Duct installation
2) Access network and local network in high electromagnetic interfering places.
Information OF 12CORE GYTA53 FIBER CALBE
No. of Tube 2Looses tube+4Filler tube
No. of fiber/Tube 6Fibers
No. of fiber 12 Fibers
Approx. Cable Diameter 13.4~19.6mm
Loose Tube Material PBT
Filling compound (Tube) Thixotropic Jelly
Strength Member Steel Wire or FRP
Water Blocking Water Swell able Material
Corrugated Steel Tape Nom. 0.25mm Thick.
Outer Sheath Nom. 2.7mm Thick. Black MDPE
Mechanical & Environmental Performance
Tensile Strength Long Term: 1000N, Short Term: 3000N
Crush Resistance Long Term: 1000N, Short Term: 3000N
Bending Radius Long Term: 10D, Short Term:20D
Storage Temperature -20~+60°C
Optical Fiber Performance
Fiber Type G.652D,125.0±1.0µm
Mode Field Diameter 9.2 ± 0.2µm at 1310 nm
Cladding Diameter 125 ± 1µm
Cladding Non-Circularity: = 1%
Coating Diameter 245 ± 10µm
Attenuation Coefficient = 0.36dB/km at 1310nm, = 0.22dB/km at 1550nm
Chromatic Dispersion =3.5ps/nm/km at 1285~1330nm, =18ps/nm/km at 1550nm
Zero Dispersion Wavelength 1300~1322nm
PMD Coefficient = 0.2ps/vkm
2087 Optical Fiber Cables Suppliers
Short on time? Let Optical Fiber Cables sellers contact you.
Single mode and multi mode SC fiber optic patch cables, SC-LC, SC-ST, SC-FC, SC-MU, SC-MTRJ, SC-E2000, 9/125|¨¬m, 50/125|¨¬m, 62.5/125|¨¬m, SM, MM, UPC, APC, PC. Customized design cables are available.
The SC fiber optic patch cord is one of the earliest type and one of the most commonly used fiber optic cable, it is convenient to use and cost saving, It is the most cheapest type fiber optic patch cable. SC fiber patch is widely uesed in fiber optic networks. SC fiber patch cable is with zirconia sleeve and plastic housing.
SC Fiber Optic Patch Cord Features:
Low insertion loss.
High return loss.
High stability and reliability.
SC Fiber Optic Patch Cord Applications:
FTTH, LAN, PON & Optical CATV
Local ring net
Optical fiber communication system
Optical fiber test equipment
Optical fiber sensor
The MPO / MTP patchcords are simplex multi-fiber Cable using the MPO / MTP connector in fiber counts of 4, 8, 12, 24 or 48. They offer Male and Female MPO / MTP connectors on each end. Available in 4~48 fibers versions as well as multi-mode (62.5/125, 10G OM2 / OM3 / OM4, Bend-insensitive fiber, etc.) and single-mode (G652D, G657A1 etc.) fiber types.
Combining 12~144 fiber trunk cable with 12F MPO/MTP and generic connectors, Gigalight;trunk cable assemblies contain MPO to MPO and MPO hybrid types. Plug and Play Reels, Pulling eye are designed to be quickly pulled and connected to Plug and Play Modules and Adapter Plates. Customized configurable to precise application requirements, these reels or pulling eye are efficiently put high-performance, high-density fiber connections exactly where you need them.
Low insertion loss.
High return loss.
High reliability and stability.
Excellent exchangeability and durability.
FC, LC, SC, ST, MU, MTRJ, E2000, DIN, D4, SMA, ESCON, FDDI, MPO, etc is available.
PC, UPC or APC polishing.
Single mode and multi-mode available.
Simplex, duplex or fan-out available.
;0.9, ;2.0, ;3.0 available.
Length: 1m, 1.5m, 2mor customized.
PVC, LSZH or Hytrel available.
Fully compliant with the standards of Telcordia GR-326-CORE and RoHS.
Low insertion loss.
High return loss.
High reliability and stability.
Excellent exchangeability and durability.
FC, LC, SC, ST, MU, MTRJ, E2000, DIN, D4, SMA, ESCON, FDDI, MPO, etc is available.
PC, UPC or APC polishing.
Single mode and multi-mode available.
Simplex, duplex or fan-out available.
;0.9, ;2.0, ;3.0 available.
Length: 1m, 1.5m, 2mor customized.
PVC, LSZH or hytrel available.
Fully compliant with the standards of Telcordia GR-326-CORE and RoHS.
Low insertion loss.
High return loss.
High reliability and stability.
Excellent exchangeability and durability.
FC, LC, SC, ST, MU, MTRJ, E2000, DIN, D4, SMA, ESCON, FDDI, MPO etc. is available.
PC, UPC or APC polishing.
Single mode and multi-mode available.
Simplex, duplex or fan-out available.
;0.9, ;2.0, ;3.0 available.
Length: 1m, 1.5m, 2mor customized.
PVC, LSZH or hytrel available.
Fully compliant with the standards of Telcordia GR-326-CORE and RoHS.
Splice Closure
The OPGW splice box is mainly used to protect the fiber optic connector between two cables and reserve a section of fiber optic inside the box for maintenance. The junction box has good sealing, waterproof and moisture-proof, and will not corrode in the power line.
Usage: Suitable for OPGW cable connection protection, has the function for direct connections and divergence connection, which can out of 4 cable, installed in the overhead pole, tower.
Structural features
a. OPGW splice box using aluminum alloy shell, resist-corrosion, high mechanical strength.
b. OPGW splice boxseals with seal ring and silicone, simple operation, open repeatedly, easy maintenance.
c. can make OPGW splice box connect ground according to the requirements ,equipped with the special fixture of towers and pole.
Telecommunication Compounds
Telecommunication Compounds are used in the manufacture of Copper Cables as well as Optic Fibre Cables. These compounds are gels manufactured by blending specially selected Base Oils with waxes and thermoplastic elastomers. The resulting gels are used as filling compounds and flooding compounds in Copper Cables as well as Optic Fibre Cables.
Applications
The compounds fill voids in polyethylene insulated and sheathed Telephone Cables. Their basic function is to prevent moisture penetration into the cables in case of any damage to the cable sleeve.
The filling compounds used in Optic Fibre Cables have to meet specification related to moisture tolerance, softness at low temperature down to -40 deg C and stability at a high temperature of 150 deg C. Savita offers wide range of products meeting these requirements of customers across the Globe.
Products offered
Savita offers two products for Copper Cables â?? Savofil and Savoflod.
Savofil is used as a filling compound, while Savoflod is used as a flooding compound. Both products meet the requirements and specifications of national and international customers.
For the Copper Cable industry, Savitaâ??s products for filling and flooding can be processed by melting as well as by pressure filling. For filling with pressure, gel is designed with appropriate thixotropic properties.
For the Optic Fibre Cable industry, Savita offers 2 products â?? Vitagel MS and Vitagel F, meeting national & international standards.
Characteristics
The products for Copper Cables - Savofil & Savoflod - for filling and flooding respectively can be processed either by melting or application of pressure. For filling with pressure, gels are designed with appropriate thixotropic properties.
Vitagel MS, used in Optic Fibre Cables, is a filling compound which is directly in contact with sensitive Optic Fibre. This gel has excellent low temperature and high temperature properties. It is stable over the temperature range of -40 deg C to 150 deg C and meets national & international standards. The product also has very good rheological properties making it suitable for processing under pressure. Savitaâ??s flooding gel, Vitagel F, is also designed to meet national and international specifications.
Gels For Cable Connectors
These are gels made from specially selected Base Oils, new generation polymers such as thermoplastic elastomers and special hydrophobic silica. The Connector Compound CN 11 is designed for high thermal, oxidative and hydrolytic stability.
This product is used to connect the distribution cable and the incoming cable, is widely applied in communication, network systems, CATV cable TV and so on. It adopts scientifically formulated engineering plastic and be shaped by injection molding, with anti-aging, anti-corrosion, flame retardant, waterproof, anti-vibration and anti-shock effects. Can effectively prevent the optic fibers from the influence of outdoor environment.
CAT6/CAT6A U/UTP Ethernet RJ45 Patch cord, SNAGLESS Strain relief Boot, AWG26 Stranded
1. Cat5e UTP Patch cord, with two modelded RJ45 Plug 3u' Gold plated,
2. Unshielded twisted Cable, 4*2*AWG26 Cable, OD=5.2MM, OFC Copper conductor,
(CCA available as well).
3, Compliant with EIA/TIA 568B, EN50173, AND ISO/IEC 11801,
4. Connect way: 1: 1 or Crossover for option,
5. Excellent Fluke test data, low Attenuation and high NEXT, RL etc, Pass Fluke Patch cord test
6. Suitable for 100MHz High speed Data transmission, Gigabit Ethernet, TP-PMD,
7. UL or cUL Listed, compliant with CMX, CM, CMR
8. Have full series popular Strain relief Mould for Choice,
Optic fiber cable specifications
1. Up to 144 fibers
2. Light weight, less additional load to tower. The maximum span can reach 1500m.
3. Strong anti-pull performance, more than 90KN.
4. Non metallic structure provides good insulation, excellent lightning resistant.
5. Equal distribution of aramid yarns with good production process, excellent stress/strain performance.
6. Excellent bullet resistant performance
7. Excellent tracking resistant performance.
8. Installation wuthout power off and the normal transmission of cable won't be influenced by power line fault
Can be installed without shutting off the power
Excellent AT performance ,The Maximum inductive at the operating point of AT sheath can reach 25 KV
Light weight and small diameter reducing the load caused by ice and wind and the load on towers and backprops
Large Span lengths and the largest span is over 1000m
Accurate control on Aramid application greatly improving the strength of cables
Accurate fiber excess length and stranding pitch to ensure the good performance of tensile strength and the temperature
The design life span is over 30 years
ADSS cable structure
ADSS cable is the short form for All-dielectric Self-supporting Optical Cable.
ADSS fiber optic cable is loose tube stranded; the tubes are filled with water resistant filling compound.
The tubes are stranded around fiber reinforced plastic are a non-metallic central strength member into a compact and circular cable core.
After the ADSS cable core is filled with filling compound, it is covered with a thin PE inner sheath, after two layers of Aramid yarns which are applied in two directions over the inner sheath as strength member,
ADSS optical fiber cable is completed with PE or AT outer sheath.
High quality zirconia ferrules.
Good repeatability and interchange.
Flame-retardant, rugged and durable jacket.
Printing helps clarify and recognize different cables.
Factory terminated and tested for insertion loss, return loss and end face.
Standard connectors LC, SC, ST, FC, E2000,DIN, MTRJ, MU are available.
�· Singlemode (OS2) and multimode (OM1, OM2, OM3, OM4, OM5) are available
Application
Data Center
Enterprise
Fiber to the X (FTTX)
Local Area Network and Wide Area Network (LAN and WAN)
Community Antenna Television Network (CATV Network)
Telecommunications Network
2087 Optical Fiber Cables Suppliers
Short on time? Let Optical Fiber Cables sellers contact you.
