Find Verified Wine Bar Set Suppliers, Manufacturers and Wholesalers

PRODUCT:

The scalp vein needle is mainly for clinical use, matched with a disposable infusion (transfusion) device or syringe for human intravenous infusion of medicine (blood) liquid. Single wing design, meets different requirements of clinical operation, easy to fix, specification identified by the color of the wing, easy to distinguish and use.

Specifications:
Material: Epicranial needles and tubes: Non-toxic medical grade PVC, ISO 10993 Connector: Non-toxic medical grade ABS, ISO 10993
Tube packaging seal: Non-toxic medical grade polyethylene, free from latex and phthalates
Biocompatibility: In accordance with ISO 10993 standard
Device type: Single-use medical device
Sterilization method: Ethylene oxide in accordance with ISO 11135 standard
Quality Control: Quality control during the process and on the finished product in accordance with ISO 2859 standard
Packaging: Micro infusion set in a pouch or in a blister pack packaged in boxes
Storage Instructions: Store in a cool, dry place away from chemicals
Shelf Life: 5 years from the production date in undamaged packaging
Packaging Material: Blister: Low-density polyethylene film Box: Cardboard, Packaging: Corrugated cardboard

Size Length Width
19G 19 0.09mm
20G 19 0.09mm
21G 19 0.08mm
22G 19 0.07mm
23G 19 0.06mm

In different countries, rebar is produced based on different standards, and in each standard, there is a definite classification in relation to the mechanical properties of steel. Most of the steel mills production complies with the Russian standard which is divided into three types of A-1, A-2 and A-3 steel.

The A-1 grade is of a flat type. The yield strength and tensile strength (rupture stress) are 2400 and 3600 kg / cm2, respectively.
The A-2 grade is of an indented bar type with the yield strength of 3400 and a tensile strength of 5000 kg/cm2.
The A-3 grade is also of an indented bar type with a yield tolerance of 4000 and a tensile strength of 6000 kg/cm2.

Arij Global Trading, with years of experience in supplying steel products, supplies the best quality of Rebar according to the world standard properties.

We can provide the armature iron needed by customers in any amount, FOB delivery to Bandar Abbas, Iran

Bars :
We are one of the leading manufacturers of Bars that are manufactured using high grade raw material such as steel procured from reliable vendors. These are offered in various shapes and sizes and can be further customized as per the specification given by our clients. Our range is widely applied in industries such as construction, railways and automotive. It includes stainless steel bars, carbon Steel bars, Alloy Steel bars, steel round bars, hex bars, wire rod in black and bright finish.

Stainless Steel :ASTM A 409, A 182, A276 Grade: 304, 304L, 304, 304H, 316, 316L, 316Ti, 321, 321H, 317, 317L, 310, 310S
Carbon Steel :A105, ISO 2062
Alloy Steel :A182, Gr. F1, F2, F11, F22, F5, F9, F91
Nickel Alloys :B162, B127, B463, B576, B168, B443
Copper Alloys :Aluminium, Copper, Brass & Gunmetal

Specifications : ASTM, ASME, AISI, AMS, AFNOR, QQS, B.S, JIS, DIN, MILS and NACE.

Product:

IV cannula catheter is a technique in which a cannula is placed inside a vein to provide venous access. Venous access allows sampling of blood as well as administration of fluids, medications, parenteral nutrition, chemotherapy, and blood products.

Specifications:
Material: Catheter: FEP (Perfluoroethylene and Propylene Copolymer + BaSO4) Catheter Hub: Polypropylene
Packing Piece: POM (Polyoxymethylene) - Packing Piece: POM (Polyoxymethylene)
Lubricant: Aminofunctionalized Polydimethylsiloxane Copolymer
Biocompatibility: According to the ISO 10993 standard
Device type: Single-use medical device
Sterilization method: Ethylene oxide in accordance with ISO 11135 standard
Quality Control: Quality control during the process and on the finished product in accordance with ISO 2859 standard
Packaging: Catheter in blister pack package in boxes
Storage Instructions: Store in a cool, dry place away from chemicals
Shelf Life: 5 years from the production date in undamaged packaging
Packaging Material: Blister: Medical paper - Blister: Low-density polyethylene film - Box: Cardboard

Size Length Width
14G 2.0 55
16G 1.6 55
18G 1.2 45
20G 1.0 33
22G 0.8 25
24G 0.7 19

Sterile Paraffin Gauze
Tull Soin

PRODUCT:

Paraffin Gauze Sterile is made from medical degreased gauze or non-woven together with Vaseline. It can lubricate the skin and protect it from cracks. It is widely used on clinics.

Specifications:
Material: 100% gauze with vaseline
Design: Facilitates air circulation and hastens healing
Application: Scratch and wound - second degree burns and skin plant Surgery of nails - Surgical wound - Chronic wound: bed sore, leg ulcer, DIAB, etc.
Advantages: Not to adhere to the wound. Remove without pain. No blood - Accelerate the healing at appropriate moisture environment.
Convenient to use. No oil feeling - Soft and comfortable to use. Especially use on hands, feet, limbs and other parts which are difficult to fix .

Size Length Width
10 cm2 10cm 10cm

Nitrile Examination Gloves, Powder Free
Medical, Care, and Hygiene Sector
Two-way protection

PRODUCT:

Fifty human dentin discs were obtained from intact third molars and randomly assigned into two control groups and three treatment groups. The first control group received no treatment. The second control group (no medicament group) was irrigated with sodium hypochlorite (NaOCI), stored in a humid environment for four weeks and then irrigated with ethylenediaminetetraacetic acid (EDTA). The three treatment groups were irrigated with NaOCl, treated for four weeks with either 1 g/mL triple antibiotic paste (TAP), 1mg/mL methylcellulose-based triple antibiotic paste (DTAP), or calcium hydroxide [Ca(OH)2] and finally irrigated with EDTA. After treatment, one half of each dentin disc was subjected to Vickers microhardness (n= 10 per group) and the other half was used to evaluate the chemical structure (phosphate/amide I ratio) of treated dentin utilizing attenuated total reflection Fourier transform infrared spectroscopy (n = 5 per group). One-way ANOVA followed by Fisher.

Specifications:
Design: Rolled edge, ambidextrous, roughened surface
Material: Nitrile material mixture
Strength Sleeve (min): 0.12-0.14
Strength Palme (min): 0.17-0.17
Strength Finger (min): 0.18-0.20
Tensile Strength: 6N min (before aging), 6N min (after aging). 800% min (before aging), 760% min (after aging)
Risk Analysis: Protein Free
Quality Standards: Certification according to DIN EN ISO9001 DIN EN ISO 455-1/-2/-3/-4 ISO 14001, ISO 13485 and ISO 11135
Quality Controls: Production according to GMP - Permanent control of production lots, Random check up by supervisors - Inspection report before shipment
Marketing: Traceability by LOT numbers

Size Length Width
S 240-250 80-85
M 240-250 90-95
L 240-250 100-105
XL 240-250 110-115

Vinyl Examination Gloves, Powder Free
Medical, Care, and Hygiene Sector
Two-way protection

PRODUCT:

Fifty human dentin discs were obtained from intact third molars and randomly assigned into two control groups and three treatment groups. The first control group received no treatment. The second control group (no medicament group) was irrigated with sodium hypochlorite (NaOCI), stored in a humid environment for four weeks, and then irrigated with ethylenediaminetetraacetic acid (EDTA). The three treatment groups were irrigated with NaOCl, treated for four weeks with either 1 g/mL triple antibiotic paste (TAP), 1mg/mL methylcellulose-based triple antibiotic paste (DTAP), or calcium hydroxide [Ca(OH)2], and finally irrigated with EDTA. After treatment, one half of each dentin disc was subjected to Vickers microhardness (n= 10 per group), and the other half was used to evaluate the chemical structure (phosphate/amide I ratio) of treated dentin utilizing attenuated total reflection Fourier transform infrared spectroscopy (n = 5 per group). One-way ANOVA followed by Fisher.

Specifications:
Design: Rolled edge, ambidextrous, roughened surface
Material: PVC material mixture
Strength Sleeve (min): 0.12-0.14
Strength Palme (min): 0.17-0.17
Strength Finger (min): 0.18-0.20
Tensile Strength: 6N min (before aging), 6N min (after aging). 800% min (before aging), 760% min (after aging)
Risk Analysis: Protein Free
Quality Standards: Certification according to DIN EN ISO9001 DIN EN ISO 455-1/-2/-3/-4 ISO 14001, ISO 13485 and ISO 11135
Quality Controls: Production according to GMP - Permanent control of production lots, Random check up by supervisors - Inspection report before shipment
Marketing: Traceability by LOT numbers

Size Length Width
S 240-250 80-85
M 240-250 90-95
L 240-250 100-105
XL 240-250 110-115

Latex-Examination Gloves, Prepowdered
Medical, Care, and Hygiene Sector
Two-way protection

PRODUCT:

Fifty human dentin discs were obtained from intact third molars and randomly assigned into two control groups and three treatment groups. The first control group received no treatment. The second control group (no medicament group) was irrigated with sodium hypochlorite (NaOCI), stored in a humid environment for four weeks, and then irrigated with ethylenediaminetetraacetic acid (EDTA). The three treatment groups were irrigated with NaOCl, treated for four weeks with either 1 g/mL triple antibiotic paste (TAP), 1mg/mL methylcellulose-based triple antibiotic paste (DTAP), or calcium hydroxide [Ca(OH)2], and finally irrigated with EDTA. After treatment, one-half of each dentin disc was subjected to Vickers microhardness (n = 10 per group), and the other half was used to evaluate the chemical structure (phosphate/amide I ratio) of treated dentin utilizing attenuated total reflection Fourier transform infrared spectroscopy (n = 5 per group). One-way ANOVA followed by Fisher.

Specifications:
Design: Rolled edge, ambidextrous, roughened surface
Material: Latex material mixture
Strength Sleeve (min): 0.12-0.14
Strength Palme (min): 0.17-0.19
Strength Finger (min): 0.18-0.20
Tensile Strength: 6N min (before aging), 6N min (after aging). 800% min (before aging), 760% min (after aging)
Risk Analysis: Acc. *Loery Method 18,9 ug protein /g of glove Acc. *HPLC Method 10,9 ug protein /g of glove
Quality Standards: Certification according to DIN EN ISO9001 DIN EN ISO 455-1/-2/-3/-4, ISO 14001, ISO 13485 and ISO 11135
Quality Controls: Production according to GMP - Permanent control of production lots Random check up by supervisors - Inspection report before shipment
Marketing: Traceability by LOT numbers
Packing: Hygienically packed in a dispenser, 100 pieces each, 1000 pieces in each carton
Special Remarks: Not suitable for dangerous materials (especially aggressive materials)

Size Length Width
S 240-250 80-85
M 240-250 90-95
L 240-250 100-105
XL 240-250 110-115

Latex-Surgical Gloves, Prepowdered
Medical, Care, and Hygiene Sector
Two-way protection

PRODUCT:
Fifty human dentin discs were obtained from intact third molars and randomly assigned into two control groups and three treatment groups. The first control group received no treatment. The second control group (no medicament group) was irrigated with sodium hypochlorite (NaOCI), stored in a humid environment for four weeks, and then irrigated with ethylenediaminetetraacetic acid (EDTA). The three treatment groups were irrigated with NaOCl, treated for four weeks with either 1 g/mL triple antibiotic paste (TAP), 1mg/mL methylcellulose-based triple antibiotic paste (DTAP), or calcium hydroxide [Ca(OH)2], and finally irrigated with EDTA. After treatment, one half of each dentin disc was subjected to Vickers microhardness (n = 10 per group), and the other half was used to evaluate the chemical structure (phosphate/amide I ratio) of treated dentin utilizing attenuated total reflection Fourier transform infrared spectroscopy (n = 5 per group). One-way ANOVA followed by Fisher.

Specifications:
Design: Rolled edge, ambidextrous, roughened surface
Material: Latex material mixture
Strength Sleeve (min): 0.22 min
Strength Palme (min): 0.26 min
Strength Finger (min): 0.32 min
Tensil Strength: 9N min (before aging), 9N min (after aging). 800% min (before aging), 760% min (after aging)
Risk Analysis: Acc. *Loery Method 18,9 ug protein /g of glove Acc.
HPLC Method 10,9 ug protein /g of glove
Sterilization: Ethylene Oxide
Quality Standards: Certification according to DIN EN ISO9001 DIN EN ISO 455-1/-2/-3/-4 ISO 14001, ISO 13485 and ISO 11135
Quality Controls: Production according to GMP - Permanent control of production lots Random check up by supervisors - Inspection report before shipment
Marketing: Traceability by LOT numbers
Packing: Wrapped by 1 pair in a cleanroom of class C, every 50 pairs are packed in box of 50 pairs, then in a 500-pairs carton


Size Length Width
6.5 280-290 80-85
7 280-290 90-95
7.5 280-290 100-105
8 280-290 110-115
86.5 280-290 115-120

Construction Machinery
- Power Trowels
- Plate Compactors
- Concrete Vibrators
- Concrete Mixers
- Surface Finish screeds
- Bar bending machines & Bar Cutters
- Levels & Levelling staffs
- Electronic theodolite
- Lasers & Laser accessories

Vina Professional Oxidant Collection Formulated by Huwell, Italy

Enhance your hair color results with the Vina Professional Oxidant Collection, featuring unique formulas and NMF factor for exceptional performance. Available in multiple options to suit various color needs:

White Oxidant: Delivers optimal performance in 4 volumes: 12% (40 Vol), 9% (30 Vol), 6% (20 Vol), and 3% (10 Vol). Available in 180 ml, 1000 ml, and 4000 ml packaging.
Red Oxidant: Perfect for mixing with warm red tones like wine, oak, and cherry, in 180 ml packaging.
Blue Oxidant: Formulated to combat yellow and orange tones, ideal for mixing with gray, smoky, and bright natural colors (Base No. 7 and above), available in 180 ml and 1000 ml.
Green (Herbal) Oxidant: Designed for olive tones (M series), neutralizing warm red hues like wine, oak, and cherry, available in 180 ml and 1000 ml packaging.

The wide range of steel pipe nipple offered by us is used as an extension to any pipe assembly. These are available in different diameters and thicknesses that meet the different application requirements of numerous industries. Our range is appreciated for quality features like robust construction, corrosion resistance, and accurate dimension. These are widely used across automotive, paper, cement, chemical, pharmaceuticals, and engineering related industries. In addition to this, our precision engineered range of steel pipe nipples is available in customized finishes as per the client’s demands.

Pressure : 2000Lbs, 3000Lbs, 6000Lbs, 9000Lbs
Specification : Elbow, Tee, Cross, Square plug, Hexgean Plug, Nipple, Cap, Coupling, Outlet for thread type & socket welding.
Material : Carbon Steel, Stainless Steel
Size Rate : from 1/8 to 6
Standard : DIN, ASME B 16.11, JIS
Thread : ISO, DIN, NPT, BSPT

Features :
Durable
High tensile strength
Resistant to temperature
Great finish
Dimensionally accurate

Orifice flanges are used instead of the standard pipe flanges when orifice plate or flow nozzle is used. In other words, orifice flanges are used with orifice meters. The basic purpose for this is to measuring the flow rate of either gases or liquids in the respective pipeline. These flanges are used in various industrial applications and are available in various sizes and materials. All orifice flange units are supplied with the plate, pressure connection holes, and jack screws.

LAP Joint Flanges are primarily employed with lap joint stubs, the combined initial cost of the two items being approximately one-third higher than that of comparable welding neck flanges. Their pressure-holding ability is little, if any, better than that of slip-on flanges and the fatigue life of the assembly is only one-tenth that of welding neck flanges. The chief use of lap joint flanges in carbon or low alloy steel piping systems is in services necessitating frequent dismantling for inspection and cleaning and where the ability to swivel flanges and to align bolt holes materially simplifies the erection of large diameter or unusually stiff piping. Their use at points where severe bending stress occurs should be avoided.

A wide range of end cap forged fittings that are engineered to precision at our vendor’s end. These fittings are made up of nickel alloy and are hot dip galvanized for increasing its service life. The testimony of quality of these fittings is mill test certificate as per EN 10204 / 3.1B, which can be provided with these fittings on the request of our clients.

We cater to various industries with our qualitative Sheets & Plates that are in huge demand in the market. We are well reckoned as one of the dominant Steel Sheets & Plates Exporters and Suppliers based in India. To match the various needs of the clients, our Sheets & Plates are available in various metals, sizes and grades.Utilization of finest quality raw materials in Carbon Steel Sheets & Plates assures high durability as well as strength. Easy to install, our Sheets & Plates provide long lasting trouble free performance without any maintenance.

Stainless Steel : ASTM A 240, SA 240, AISI
Type :304, 304L, 304H, 310, 310S, 316, 316L, 316Ti, 317, 317L, 321, 321H
Carbon Steel : ASTM A 515, A 516 Grade: 60, 70 B 2062
Alloy Steel : ASTM A 387, Class: I/II, Grade: 11, 22, 5, 9, 12, 1
Nickel Alloys :B162, B127, B463, B576, B168, B443
Copper Alloys :Aluminium, Copper, Brass & Gunmetal

Weld neck flanges are drilled (machined) with the wall thickness of the flange having the same dimensions of the matching pipe. The lighter the pipe is, the larger the bore, conversely, the heavier the pipe, the small the bore. Our range weld neck flanges, welding neck flanges are normally used for high-pressure, cold or hot temperature. We specialize these flanges in different dimensional and material specifications based upon the requirements of the clients.

Socket weld flange is a device that is welded to the end of pipe so that the pipe can be bolted to another pipe with a similar flange. Stainless steel socket weld flanges enable a pipe to be disconnected and reconnected with ease. Available in a spectrum of shape and sizes, our forged light weight steel socket weld flanges are manufactured using superior grade material such as stainless steel socket weld flanges, carbon steel socket weld flanges and known for their durability and performance.

A Threaded Flange is usually confined to a special application. The main benefit of a Threaded Flange is that it can be assembled without welding which makes it perfect for extremely high pressure services. Threaded Flange is unsuited for conditions involving temperature or bending stresses of any magnitude. Particularly under cyclic conditions where leakage through the threads may occur in relatively few cycles of heating or stress.