Find Verified Medical Software Suppliers, Manufacturers and Wholesalers

PRODUCT:

The scalp vein needle is mainly for clinical use, matched with a disposable infusion (transfusion) device or syringe for human intravenous infusion of medicine (blood) liquid. Single wing design, meets different requirements of clinical operation, easy to fix, specification identified by the color of the wing, easy to distinguish and use.

Specifications:
Material: Epicranial needles and tubes: Non-toxic medical grade PVC, ISO 10993 Connector: Non-toxic medical grade ABS, ISO 10993
Tube packaging seal: Non-toxic medical grade polyethylene, free from latex and phthalates
Biocompatibility: In accordance with ISO 10993 standard
Device type: Single-use medical device
Sterilization method: Ethylene oxide in accordance with ISO 11135 standard
Quality Control: Quality control during the process and on the finished product in accordance with ISO 2859 standard
Packaging: Micro infusion set in a pouch or in a blister pack packaged in boxes
Storage Instructions: Store in a cool, dry place away from chemicals
Shelf Life: 5 years from the production date in undamaged packaging
Packaging Material: Blister: Low-density polyethylene film Box: Cardboard, Packaging: Corrugated cardboard

Size Length Width
19G 19 0.09mm
20G 19 0.09mm
21G 19 0.08mm
22G 19 0.07mm
23G 19 0.06mm

Product:

IV cannula catheter is a technique in which a cannula is placed inside a vein to provide venous access. Venous access allows sampling of blood as well as administration of fluids, medications, parenteral nutrition, chemotherapy, and blood products.

Specifications:
Material: Catheter: FEP (Perfluoroethylene and Propylene Copolymer + BaSO4) Catheter Hub: Polypropylene
Packing Piece: POM (Polyoxymethylene) - Packing Piece: POM (Polyoxymethylene)
Lubricant: Aminofunctionalized Polydimethylsiloxane Copolymer
Biocompatibility: According to the ISO 10993 standard
Device type: Single-use medical device
Sterilization method: Ethylene oxide in accordance with ISO 11135 standard
Quality Control: Quality control during the process and on the finished product in accordance with ISO 2859 standard
Packaging: Catheter in blister pack package in boxes
Storage Instructions: Store in a cool, dry place away from chemicals
Shelf Life: 5 years from the production date in undamaged packaging
Packaging Material: Blister: Medical paper - Blister: Low-density polyethylene film - Box: Cardboard

Size Length Width
14G 2.0 55
16G 1.6 55
18G 1.2 45
20G 1.0 33
22G 0.8 25
24G 0.7 19

Nitrile Examination Gloves, Powder Free
Medical, Care, and Hygiene Sector
Two-way protection

PRODUCT:

Fifty human dentin discs were obtained from intact third molars and randomly assigned into two control groups and three treatment groups. The first control group received no treatment. The second control group (no medicament group) was irrigated with sodium hypochlorite (NaOCI), stored in a humid environment for four weeks and then irrigated with ethylenediaminetetraacetic acid (EDTA). The three treatment groups were irrigated with NaOCl, treated for four weeks with either 1 g/mL triple antibiotic paste (TAP), 1mg/mL methylcellulose-based triple antibiotic paste (DTAP), or calcium hydroxide [Ca(OH)2] and finally irrigated with EDTA. After treatment, one half of each dentin disc was subjected to Vickers microhardness (n= 10 per group) and the other half was used to evaluate the chemical structure (phosphate/amide I ratio) of treated dentin utilizing attenuated total reflection Fourier transform infrared spectroscopy (n = 5 per group). One-way ANOVA followed by Fisher.

Specifications:
Design: Rolled edge, ambidextrous, roughened surface
Material: Nitrile material mixture
Strength Sleeve (min): 0.12-0.14
Strength Palme (min): 0.17-0.17
Strength Finger (min): 0.18-0.20
Tensile Strength: 6N min (before aging), 6N min (after aging). 800% min (before aging), 760% min (after aging)
Risk Analysis: Protein Free
Quality Standards: Certification according to DIN EN ISO9001 DIN EN ISO 455-1/-2/-3/-4 ISO 14001, ISO 13485 and ISO 11135
Quality Controls: Production according to GMP - Permanent control of production lots, Random check up by supervisors - Inspection report before shipment
Marketing: Traceability by LOT numbers

Size Length Width
S 240-250 80-85
M 240-250 90-95
L 240-250 100-105
XL 240-250 110-115

Vinyl Examination Gloves, Powder Free
Medical, Care, and Hygiene Sector
Two-way protection

PRODUCT:

Fifty human dentin discs were obtained from intact third molars and randomly assigned into two control groups and three treatment groups. The first control group received no treatment. The second control group (no medicament group) was irrigated with sodium hypochlorite (NaOCI), stored in a humid environment for four weeks, and then irrigated with ethylenediaminetetraacetic acid (EDTA). The three treatment groups were irrigated with NaOCl, treated for four weeks with either 1 g/mL triple antibiotic paste (TAP), 1mg/mL methylcellulose-based triple antibiotic paste (DTAP), or calcium hydroxide [Ca(OH)2], and finally irrigated with EDTA. After treatment, one half of each dentin disc was subjected to Vickers microhardness (n= 10 per group), and the other half was used to evaluate the chemical structure (phosphate/amide I ratio) of treated dentin utilizing attenuated total reflection Fourier transform infrared spectroscopy (n = 5 per group). One-way ANOVA followed by Fisher.

Specifications:
Design: Rolled edge, ambidextrous, roughened surface
Material: PVC material mixture
Strength Sleeve (min): 0.12-0.14
Strength Palme (min): 0.17-0.17
Strength Finger (min): 0.18-0.20
Tensile Strength: 6N min (before aging), 6N min (after aging). 800% min (before aging), 760% min (after aging)
Risk Analysis: Protein Free
Quality Standards: Certification according to DIN EN ISO9001 DIN EN ISO 455-1/-2/-3/-4 ISO 14001, ISO 13485 and ISO 11135
Quality Controls: Production according to GMP - Permanent control of production lots, Random check up by supervisors - Inspection report before shipment
Marketing: Traceability by LOT numbers

Size Length Width
S 240-250 80-85
M 240-250 90-95
L 240-250 100-105
XL 240-250 110-115

Latex-Examination Gloves, Prepowdered
Medical, Care, and Hygiene Sector
Two-way protection

PRODUCT:

Fifty human dentin discs were obtained from intact third molars and randomly assigned into two control groups and three treatment groups. The first control group received no treatment. The second control group (no medicament group) was irrigated with sodium hypochlorite (NaOCI), stored in a humid environment for four weeks, and then irrigated with ethylenediaminetetraacetic acid (EDTA). The three treatment groups were irrigated with NaOCl, treated for four weeks with either 1 g/mL triple antibiotic paste (TAP), 1mg/mL methylcellulose-based triple antibiotic paste (DTAP), or calcium hydroxide [Ca(OH)2], and finally irrigated with EDTA. After treatment, one-half of each dentin disc was subjected to Vickers microhardness (n = 10 per group), and the other half was used to evaluate the chemical structure (phosphate/amide I ratio) of treated dentin utilizing attenuated total reflection Fourier transform infrared spectroscopy (n = 5 per group). One-way ANOVA followed by Fisher.

Specifications:
Design: Rolled edge, ambidextrous, roughened surface
Material: Latex material mixture
Strength Sleeve (min): 0.12-0.14
Strength Palme (min): 0.17-0.19
Strength Finger (min): 0.18-0.20
Tensile Strength: 6N min (before aging), 6N min (after aging). 800% min (before aging), 760% min (after aging)
Risk Analysis: Acc. *Loery Method 18,9 ug protein /g of glove Acc. *HPLC Method 10,9 ug protein /g of glove
Quality Standards: Certification according to DIN EN ISO9001 DIN EN ISO 455-1/-2/-3/-4, ISO 14001, ISO 13485 and ISO 11135
Quality Controls: Production according to GMP - Permanent control of production lots Random check up by supervisors - Inspection report before shipment
Marketing: Traceability by LOT numbers
Packing: Hygienically packed in a dispenser, 100 pieces each, 1000 pieces in each carton
Special Remarks: Not suitable for dangerous materials (especially aggressive materials)

Size Length Width
S 240-250 80-85
M 240-250 90-95
L 240-250 100-105
XL 240-250 110-115

Latex-Surgical Gloves, Prepowdered
Medical, Care, and Hygiene Sector
Two-way protection

PRODUCT:
Fifty human dentin discs were obtained from intact third molars and randomly assigned into two control groups and three treatment groups. The first control group received no treatment. The second control group (no medicament group) was irrigated with sodium hypochlorite (NaOCI), stored in a humid environment for four weeks, and then irrigated with ethylenediaminetetraacetic acid (EDTA). The three treatment groups were irrigated with NaOCl, treated for four weeks with either 1 g/mL triple antibiotic paste (TAP), 1mg/mL methylcellulose-based triple antibiotic paste (DTAP), or calcium hydroxide [Ca(OH)2], and finally irrigated with EDTA. After treatment, one half of each dentin disc was subjected to Vickers microhardness (n = 10 per group), and the other half was used to evaluate the chemical structure (phosphate/amide I ratio) of treated dentin utilizing attenuated total reflection Fourier transform infrared spectroscopy (n = 5 per group). One-way ANOVA followed by Fisher.

Specifications:
Design: Rolled edge, ambidextrous, roughened surface
Material: Latex material mixture
Strength Sleeve (min): 0.22 min
Strength Palme (min): 0.26 min
Strength Finger (min): 0.32 min
Tensil Strength: 9N min (before aging), 9N min (after aging). 800% min (before aging), 760% min (after aging)
Risk Analysis: Acc. *Loery Method 18,9 ug protein /g of glove Acc.
HPLC Method 10,9 ug protein /g of glove
Sterilization: Ethylene Oxide
Quality Standards: Certification according to DIN EN ISO9001 DIN EN ISO 455-1/-2/-3/-4 ISO 14001, ISO 13485 and ISO 11135
Quality Controls: Production according to GMP - Permanent control of production lots Random check up by supervisors - Inspection report before shipment
Marketing: Traceability by LOT numbers
Packing: Wrapped by 1 pair in a cleanroom of class C, every 50 pairs are packed in box of 50 pairs, then in a 500-pairs carton


Size Length Width
6.5 280-290 80-85
7 280-290 90-95
7.5 280-290 100-105
8 280-290 110-115
86.5 280-290 115-120

Sterile Paraffin Gauze
Tull Soin

PRODUCT:

Paraffin Gauze Sterile is made from medical degreased gauze or non-woven together with Vaseline. It can lubricate the skin and protect it from cracks. It is widely used on clinics.

Specifications:
Material: 100% gauze with vaseline
Design: Facilitates air circulation and hastens healing
Application: Scratch and wound - second degree burns and skin plant Surgery of nails - Surgical wound - Chronic wound: bed sore, leg ulcer, DIAB, etc.
Advantages: Not to adhere to the wound. Remove without pain. No blood - Accelerate the healing at appropriate moisture environment.
Convenient to use. No oil feeling - Soft and comfortable to use. Especially use on hands, feet, limbs and other parts which are difficult to fix .

Size Length Width
10 cm2 10cm 10cm

Computerized asset management software is a practice that involves managing and optimizing the purchasing, deployment, maintenance and disposal of software applications within an organization. These asset management software usually involves gathering detailed hardware and software management information and which is used to make important decision making about the purchase and distribution of hardware and software. Organizations that develop and maintain an effective it asset management program that minimizes the risk and less accurate information. Cams has some common set of goals are improves it service to end users, creates standards and process for managing assets. Our sunsmart established this service since 2005 and customers got satisfied with our services. For more details, visit our website @ http://sunsmartglobal.Com/cams-asset-management-software-dubai-uae-qatar-usa-london-india.Aspx

For an organization to develop, information has to flow to the right people at the right time. Document management system is a system used to track, manage and store documents, it also helps to reduce the paper. If the documents are to be shared internally or externally, then these documents need to be managed and audited. Major benefits of dms are reduced printing and photocopying, less postage and stationery, find things faster, faster and cheaper audits, more efficient processes, and better decision making. Document management system is often viewed as a component of enterprise content management (ecm), digital asset management, document imaging, workflow systems, and record management systems. Our sunsmart established this service since 2005 and customers got satisfied with our services. For more details, visit our website @ http://sunsmartglobal.Com/dms-document-management-software-dubai-qatar-uae-usa-london-india.Aspx

Human resource management software is the most extensive, simple to use. Hrms allows you to strengthen the performance to take smarter judgements around the complete critical hr jobs. Foreign hrms possessing entire work from recruitment to retirement life. Some of its unique key capabilities includes are recruitment, online review, checklist, 360 degree overall performance appraisal, payroll digesting etc., hrms has some benefits are fasted move live occasion, worker digital camera record supervision involved, works with any kind of web browser and any kind of os. Our sunsmart established this service since 2005 and customers got satisfied with our services. For more details, visit our website @ http://sunsmartglobal.Com/hrms-hr-management-software-dubai-qatar-uae-usa-london-india.Aspx

Three Ply mask with Loop. Quality certified.
Width- 175 mm +/- 5mm
Height - 95mm +/- 5mm
Filter - 30GSM
Bacterial filter efficiency - NLT 95%