Find Verified Embedded Systems Suppliers, Manufacturers and Wholesalers

Bentonite referred to as either Calcium Bentonite or Sodium Bentonite is generally one of the most multi-functional minerals. Basically, the inherent physical properties in Bentonite provide a wide range of industrial applications and since the Middle East is specifically rich in this mineral resource; therefore you can locate the best quality of varied grades of Bentonite in here. The quality and grade of Bentonites modifies their applications in particular. However, the demand for Bentonite varies significantly from country to country.

Our expert commercial team in Arij is well-prepared to supply from lump size to fine powder in suitable packaging for different sizes. Here are the major application areas of Bentonite:

Foundry: Building agents for special molding sands, Bindings agents for synthetic molding sands, core sands, binding agents for anhydrous casting sands and for thickening blackwashes.
Drilling Industry: Borehole scavenging for saltwater/Thixotropic suspensions for borehole scavenging
Building Industry: Supporting suspensions for cut-off diaphragm wall constructions and shield tunneling/subsoil sealing (e.g. dumps) anti-friction agents for pagejacking and shaft sinking additive for soil concrete, concrete and mortar.
Ceramics Industry: Plasticizing of ceramic compounds, Improvement of strength, fluxing agents.
Paint and Varnish: Thickening, Stabilizing and anti-setting agents for paints, varnishes, coating materials, sealing cement waxes and adhesives.
Ore Production Industry: Binding agents for ore pelletizing.
Paper Industry: Pigment and color developer for carbonless copying paper/adsorption of impurities in the white water system.

MST Tile Levelling System Achieve Perfect Tile Alignment with Ease

The MST Levelling System guarantees superior flatness between tiles by preventing unwanted movements during the mortar setting process. Its a fast, reliable, and 100% effective tool that simplifies tile installation, ensuring a smooth, lippage-free finish every time. Designed to save time and enhance the quality of your ceramic or stone laying, its perfect for both professionals and DIY enthusiasts.
Key Benefits:
Professional Finish: Delivers a flawless, perfectly aligned surface with no uneven edges between tiles.
Easier Grouting: The even surface achieved simplifies the grouting process, reducing time and effort.

Prevents Tile Cracking: Minimizes the risk of tiles cracking due to movement during mortar setting.

Level Installation: Ensures uniformity in height across tiles, giving a sleek and professional result.

Stronger Floor: Creates a durable, long-lasting surface by ensuring all tiles are firmly in place during installation.

Planning and Visualization: Helps you plan and visualize the final layout more accurately for a perfect finish.

Reduces Lippage: Eliminates unsightly lippage, resulting in a smooth, even surface without any raised tile edges.

Minimal Material Waste: Optimizes material usage by ensuring tiles are placed correctly, minimizing costly mistakes.

Improves Efficiency: Cuts down on installation time while improving the quality of the end result.
Whether you're a seasoned professional or tackling a DIY project, the MST Levelling System ensures a fast and precise installation process, making your tile-laying job easier, more efficient, and error-free.

E-man - school management system û a fully automated software for schools , educational organisations. (in vb , ms access)
Features : some of the features of this product are ,
Accounts
Student profile (attendence , mark entry, student performance, etc..)
Staff profile
Class
Fees
Hostel management
Time-table management

Shaft length : S: 381mm (15") | L: 508mm (20")
Starting system : Manual
Weight : S: 24kg | L: 25kg
Engine type : OHV
Fuel delivery system : Carburetor
No. of cylinders : 1
Displacement : 138cm3
Bore x Stroke : 60.4mm x 48mm
Maximum output : 4.4kW
Full throttle operating range : 4,750 - 5,750rpm
Steering : Tiller
Oil pan capacity : 0.7 litres

Ignition system : Digital CDI
Alternator : 12V 5A (optional)
Engine mounting : Bushing type
Trim method : Manual trim & tilt
Gear ratio : 1.92:1
Gear shift : F-N-R
Exhaust : Above prop hub exhaust
Propeller selection (pitch) : 6 - 7" (Alloy)
Fuel tank capacity : Integral 1L (remote connection)
Fuel : minimum 91 (RON) octane

DF 15 HP :- 4-stroke
Shaft length : S: 381mm (15")| L: 508 mm (20")
Starting system : Electric or manual
Weight : MS: 44.0kg | ML: 45.0kg | ES: 48.0kg | EL: 49.0kg | PTL: 55.5kg
Engine type : OHC 4-valve
Fuel delivery system : Electronic fuel injection
No. of cylinders : In-line 2
Displacement : 327cm3
Bore x Stroke : 60.4mm x 57mm
Maximum output : 11.0kW
Full throttle operating range : 5,000 - 6,000rpm
Steering : Remote | Tiller
Oil pan capacity : 1.0 litre

Ignition system : Digital CDI
Alternator : E: 12V 12A | M: 12V 6A (op.)
Engine mounting : Shear mount
Trim method : Manual trim & tilt | Power tilt
Gear ratio : 2.08:1
Gear shift : F-N-R
Exhaust : Through prop hub exhaust
Propeller selection (pitch) : 7"- 12" (Alloy)
Fuel tank capacity : Separate 12L
Fuel ; minimum 91 (RON) octane

DF 20 HP:- 4-stroke
Shaft length : S: 381mm (15") | L: 508 mm (20")
Starting system : Electric or manual
Weight : MS: 44kg | ML: 45kg | ES: 48kg | EL: 49kg | PTS: 52.5kg | PTL: 54.5kg | PTH: 55.5kg
Engine type : OHC 4-valve
Fuel delivery system : Electronic fuel injection
No. of cylinders : In-line 2
Displacement : 327cm3
Bore x Stroke : 60.4mm x 57mm
Maximum output : 14.7 kW
Full throttle operating range : 5,300 - 6,300rpm
Steering : Remote | Tiller
Oil pan capacity : 1.5 litres

Ignition system : Digital CDI
Alternator : E: 12V 12A | M: 12V 6A (op.)
Engine mounting : Shear mount
Trim method : Manual trim & tilt | Power tilt
Gear ratio : 2.08:1
Gear shift : F-N-R
Exhaust : Through prop hub exhaust
Propeller selection (pitch) : 7"- 12" (Alloy)
Fuel tank capacity : Separate 12L
Fuel : minimum 91 (RON) octane

DF 25 HP:- 4-stroke
Recommended Transom Height (inches) : S:15" L:20"
Starting System : Manual S /Electric S and L
Weight LBS : Manual S: 136.6 / Electric S: 143 - Electric, Tiller, Power Trim and Tilt L: 163
Engine Type : SOHC 4-Valve
Fuel Delivery System : Suzuki Battery-less Electronic Fuel Injection with Lean Burn Control
No. Of Cylinders : 3
Piston Displacement inches (cc) : 29.8 (489)
Bore X Stroke Inches (mm) : 2.80 x 2.68 ()
Maximum Output HP : 25
Operating Range (RPM : 5000 - 6000
Steering : Tiller/Remote
Choke : N/A - Suzuki Electronic Fuel Injection
Oil Pan Capacity quarts (liter) : 1.6 (1.5)

With multi-direction air flow supply, automatic swing wind, users can set auxiliary wind gap to send part of air to other place, so as to improve the indoor temperature and the air flow uniformity. System adopts big diameter vortex centrifugal fan to make running silently, and optional anion generator to make pure and fresh indoor air.

Ultrathin frame, min-thickness for frame is only 260mm, users can chose installation direction for connection pipe depending on spot situation, the overall dimension for part of unit is only 590x590mm easy installation with low installation cost.

Remote control is available, flexible control method.

High lift water pump design (750mm); Disposal of condenser water pipes is easy and flexible.

Water level switch protection ensures no water leakage, water in the discharge pan can be
discharged manually; and the water holder pan is designed with discharge hole, which can
discharge the remaining condenser water on time, so as to reduce the possibility for bacteria growth, meanwhile discharging dirt in the regular time reduces clogging probability for water pump.

â??Câ?? type heat exchanger can aid terminal air flow and the uniformity for cooling system, the effect for 4-way air-out can be more balanced, and system leak out possibility can be lower. Hydrophile aluminum coil fin can greatly reduce condensation water remaining on the fin, therefore it reduces the windage and the effect for heat exchange is also improved.

Available for BMS concentrate intelligent control system. And some more designs for easy installation including built-in water valve (optional) for easy exterior connection installation, hand protection grilling and stainless steel soft pipe connection.

We provide an extensive range of high quality Blind Flanges. These products don’t have any bore, and they are commonly used to block/close the end of the piping system. Manufactured with the latest advanced technologies and high quality raw materials, these products are highly durable and resistant to corrosion. We offer product customization and they are available at competitive prices.The reduction can be either threaded or welded based upon the requirements of the client.

LAP Joint Flanges are primarily employed with lap joint stubs, the combined initial cost of the two items being approximately one-third higher than that of comparable welding neck flanges. Their pressure-holding ability is little, if any, better than that of slip-on flanges and the fatigue life of the assembly is only one-tenth that of welding neck flanges. The chief use of lap joint flanges in carbon or low alloy steel piping systems is in services necessitating frequent dismantling for inspection and cleaning and where the ability to swivel flanges and to align bolt holes materially simplifies the erection of large diameter or unusually stiff piping. Their use at points where severe bending stress occurs should be avoided.

TI UNITS Reciprocating Water Chillers are available in two types of air cooled and water
cooled in capacity range of 5 to 240 tons of refrigeration and compressor configurations
of one to four. Evaporators and condensers are high efficiency shell and tube heat exchangers designed based on TEMA (Tubular Exchanger Manufacturers Association) standards. Safety controls installed on all units include high and low pressure cut-outs, compressor oil pressure safety cut-out, water anti freeze thermostat, water flow switch and evaporator entering water thermostat. Whatever mentioned above, are all chosen from the most recognized controls manufacturers in the air conditioning industry.
Compressors are by DWM COPELAND and BITZER which happens to be one of the best and the most reliable brands. Raw materials such as copper tubes, fittings and valves are supplied by well respected manufactures. Electrical safety measures such as three phase controller and circuit breakers are available on all units. A fault detection system for the whole unit is available upon request.

Microprocessor based PLC controller is also available as needed.

Moringa Oleifera Leaves Powder:

We are the manufacturers & exporters of dried moringa leaves, moringa leaves tea cut, moringa leaves powder, moringa leaves tablet, moringa leaves capsules, moringa seeds, moringa seeds powder, moringa oil, moringa dry flowers, fresh drumstick, drumstick pods, drumstick pods powder & moringa roots powder [seasonal]

A nutritional supplement :

100%  Natural & Herbal Powerful source of Vitamin A[10 times of Carrot], Vitamin B, Vitamin C[8 times of Orange], Calcium[4 times of Milk], Amino Acids, Anti- Oxidents, Iron, Protein & Potassium[4 times of Bananas] helps to enhance overall health system.

Moringa is used for treating such widespread conditions as:

Cancer, kidney stones
Diabetes, anemia, epilepsy arthritis and other joint pain, such as rheumatism allergies and asthma constipation, stomach pains and and diarrhea stomach and intestinal ulcers or spasms chronic headaches heart problems, including high blood pressure fluid retention, low sex drive thyroid disorders bacterial, fungal, viral and parasitic infections

Ammonia is one nitrogen fertilizer component that can be synthesized from in-expensive raw materials. Since nitrogen makes up a significant portion of the earth's atmosphere, a process was developed to produce ammonia from air. In this process, natural gas and steam are pumped into a large vessel. Next, air is pumped into the system, and oxygen is removed by the burning of natural gas and steam. This leaves primarily nitrogen, hydrogen, and carbon dioxide. The carbon dioxide is removed and ammonia is produced by introducing an electric current into the system. Catalysts such as magnetite (Fe3O4) have been used to improve the speed and efficiency of ammonia synthesis. Any impurities are removed from the ammonia, and it is stored in tanks until it is further processed.

Potassium fertilizer component:
Potassium chloride is typically supplied to fertilizer manufacturers in bulk. The manufacturer converts it into a more usable form by granulating it. This makes it easier to mix with other fertilizer components in the next step.

Granulating and blending
To produce fertilizer in the most usable form, each of the different compounds, ammonium nitrate, potassium chloride, ammonium phosphate, and triple superphosphate are granulated and blended together. One method of granulation involves putting the solid materials into a rotating drum which has an inclined axis. As the drum rotates, pieces of the solid fertilizer take on small spherical shapes. They are passed through a screen that separates out adequately sized particles. A coating of inert dust is then applied to the particles, keeping each one discrete and inhibiting moisture retention. Finally, the particles are dried, completing the granulation process.

The different types of particles are blended together in appropriate proportions to produce a composite fertilizer. The blending is done in a large mixing drum that rotates a specific number of turns to produce the best mixture possible. After mixing, the fertilizer is emptied onto a conveyor belt, which transports it to the bagging machine.

Bagging:
Fertilizers are typically supplied to farmers in large bags. To fill these bags the fertilizer is first delivered into a large hopper. An appropriate amount is released from the hopper into a bag that is held open by a clamping device. The bag is on a vibrating surface, which allows better packing. When filling is complete, the bag is transported upright to a machine that seals it closed. The bag is then conveyored to a palletizer, which stacks multiple bags, readying them for shipment to distributors and eventually to farmers.

TI UNIT compact roof top chiller units are manufactured in type of air cooled in capacities of 5 to 360T.R. in one to four circuited configurations. In all TI UNIT compact roof-top chiller units the frames and body are from galvanized steel & stainless steel (316l) (option) the chassis made steel channel in appropriate thicknesses and all of units are completely painted in the proper thickness. Evaporators are high efficiency shell and tube heat exchangers, designed based on TEMA. Condenser of compact rooftop chiller unit made of plated coil, designed based on TEMA. Chillers with plate type heat exchangers are available upon request. TI UNIT compact roof top chillers can be designed to operate with R-22, R-407C and R-134a refrigerants. Safety controls installed on all units include high, oil and low pressure cut-outs, compressor safety cut-out, water anti freeze thermostat, water flow switch and evaporator entering water thermostat and compressor operation time logger. The above mentioned are all chosen from the most recognized controls manufactures in the air conditioning industry.
Automatic condensing temperature control:
A controller, factory installed on each unit automatically stages the condenser fans allowing the unit to start. With this controller the condenser fans start stage by stage.
Raw materials such as copper tubes, fittings and valves are supplied by well-respected
manufacturers. Electrical safety measures such as three phase controller and circuit breakers are, available on all units. A fault detection system for the whole unit is available upon request. Microprocessor based PLC controller is also available as needed.
Suitable accessories make the chillers operable in all seasons according to the application requirements without any problems.