Please click here to check who's online and chat with them.

Find Verified Heat Convectors Suppliers, Manufacturers and Wholesalers

Top Supplier Cities : Muscat   -   Ghobra  
Jul-07-21
 
TI UNIT compact roof top chiller units are manufactured in type of air cooled in capacities of 5 to 360T.R. in one to four circuited configurations. In all TI UNIT compact roof-top chiller units the frames and body are from galvanized steel & stainless steel (316l) (option) the chassis made steel channel in appropriate thicknesses and all of units are completely painted in the proper thickness. Evaporators are high efficiency shell and tube heat exchangers, designed based on TEMA. Condenser of compact rooftop chiller unit made of plated coil, designed based on TEMA. Chillers with plate type heat exchangers are available upon request. TI UNIT compact roof top chillers can be designed to operate with R-22, R-407C and R-134a refrigerants. Safety controls installed on all units include high, oil and low pressure cut-outs, compressor safety cut-out, water anti freeze thermostat, water flow switch and evaporator entering water thermostat and compressor operation time logger. The above mentioned are all chosen from the most recognized controls manufactures in the air conditioning industry.
Automatic condensing temperature control:
A controller, factory installed on each unit automatically stages the condenser fans allowing the unit to start. With this controller the condenser fans start stage by stage.
Raw materials such as copper tubes, fittings and valves are supplied by well-respected
manufacturers. Electrical safety measures such as three phase controller and circuit breakers are, available on all units. A fault detection system for the whole unit is available upon request. Microprocessor based PLC controller is also available as needed.
Suitable accessories make the chillers operable in all seasons according to the application requirements without any problems.
Jul-07-21
 
TI UNIT screw chillers are manufactured in two types of air cooled and water cooled in capacities from 50 to 560 T.R. in one to four circuited configurations. Evaporators and condenser Chillers with plate type heat exchangers are available upon request. For further related technical information, please send your inquiries to TI UNIT mfg. group.
TI UNIT screw chillers can be designed to operate with R-22 and R-134a refrigerants. Bitzer screw compressors suitable for use with R-134a refrigerant are available in two versions (m.vr.1 & m.vr.2) which can be used in the chillers as required.

Safety controls installed on all units include high and low pressure cut-outs, compressor oil level control safety cut-out, water anti freeze thermostat, water flow switch and evaporator entering water thermostat and compressor operation time logger. The above mentioned are all chosen from the most recognized controls manufactures in the air conditioning industry. Compressors are by Bitzer which happens to be one of the best and most reliable brands. Raw materials such as copper tubes, fittings and valves are supplied by well-respected manufactures. Electrical safety measures such as three phase controller and circuit breakers, are available on all units.
A fault detection system for the whole unit is available upon request. Microprocessor based PLC controller is also available as needed.
TI UNIT screw chillers are also available upon request for industrial applications in both Air Cooled and Water Cooled types; Suitable accessories make the chillers operable in all seasons according to the application requirements without any problems.
Jul-07-21
 
TI UNITS Reciprocating Water Chillers are available in two types of air cooled and water
cooled in capacity range of 5 to 240 tons of refrigeration and compressor configurations
of one to four. Evaporators and condensers are high efficiency shell and tube heat exchangers designed based on TEMA (Tubular Exchanger Manufacturers Association) standards. Safety controls installed on all units include high and low pressure cut-outs, compressor oil pressure safety cut-out, water anti freeze thermostat, water flow switch and evaporator entering water thermostat. Whatever mentioned above, are all chosen from the most recognized controls manufacturers in the air conditioning industry.
Compressors are by DWM COPELAND and BITZER which happens to be one of the best and the most reliable brands. Raw materials such as copper tubes, fittings and valves are supplied by well respected manufactures. Electrical safety measures such as three phase controller and circuit breakers are available on all units. A fault detection system for the whole unit is available upon request.

Microprocessor based PLC controller is also available as needed.
Jul-07-21
 
In all TI UNIT air handling units the frames are from aluminum profiles while the chassis and body panels are made from galvanized steel sheets in appropriate thicknesses.
All units are completely painted in the proper thickness.

Blower(S):
Double width-double inlet centrifugal fans with forward curved blades are normally used for low pressure drop requirements as opposed to fans with backward curved blades which are for high pressure drop applications. Fans and housings are made of galvanized steel each set off a plus other related components such as shafts are statically and dynamically balanced, shafts are selected from proper material and size. Other power transmission components such as pulleys and belts are also suit ably chosen depending on the required fan speed and electric motor power.
Fan(s) and the corresponding electric motor(s) are installed on an independent chassis which is itself installed on the main chassis using vibration dampers in order to eliminate transfer of vibrations to the structure. To further reduce the effects of vibrations, fan outlet (s) are also connected to the structure via flexible material such as canvous.
All 380V/3/50Hz electric motors are selected with insulation class of (f) and ingress protection of (IP- 54). Electric motors with ingress protection of (IP- 55) are also available upon request.

Coil (S):
Cooling and heating coils or either one of the two depending on the Requirement May be installed. Cooling coils are available in two, types of chilled water and direct expansion (D.X.) as per clients requirements. The chilled water coils are constructed of 5/8 O.D copper tubes plate finned (8, 10, 12 or 14 FPI) in aluminum or copper upon request.
The D.X. Coils are constructed of 3/8 OD copper tubes also plate finned (10, 12 or 14 FPI) in aluminum or copper as required. The chilled water for cooling coils in to be supplied by a water chiller and in the D.X. coils cooling is provided through the use of refrigerant such as R-22, R-407c or R-134a. Chilled water coils may be requested in 4 or 6 rows and as to the D.X. coils, they are available in 4 or 6 row configurations. Heating coils are available in two types of hot water and steam. The hot water coil similar to chilled water coil is offered in 1 or 2 row configurations. Steam heating coils are constructed of 1/2 seamless steel pipe spiral finned in aluminum or copper. Coils in 1 & 2 -row configurations are available upon request.

Mixing box:
Fresh and return air streams are mixed in the mixing box .An independent air damper is included for each air stream. Air Dampers are manufactured from aluminum in opposed blade configuration and are air sealed through the use of rubber strip gasket. Damper actuators ma y be easily installed when required. Washable aluminum filter modules 2 inches in thickness are arranged in (V) type configuration inside these boxes. Housing for
GOLD Member
Dec-15-23
 
A type of gypsum processed by heating natural gypsum, which results in a fine powder used in construction and medical applications. Used in construction, Medical industry, Dental Care and Fire Proofing, etc.
35 Heat Convectors Suppliers
Short on time? Let Heat Convectors sellers contact you.
Jun-30-21
Aug-27-21
Supplier From Muscat, Madinat As Sultan Qaboos, Oman
May-22-13
Supplier From Muscat, Oman
May-15-14
Supplier From Salalah, Dhofar, Oman
May-28-09
Supplier From Muscat, Dofar, Oman
VERIFIED
Apr-01-24
 
Liquefied Petroleum Gas (LPG) - Versatile, Clean, and Efficient! Embrace the ultimate solution for
your heating, cooking, and automotive needs with our LPG. Known for its exceptional versatility, LPG
is a clean-burning, sustainable fuel that provides consistent energy wherever you need it. Whether it's
for residential warmth, culinary excellence, or fueling your journey, our LPG offers the efficiency and
reliability you deserve. Choose LPG for a greener, more flexible energy source that fits perfectly into
your lifestyle.
VERIFIED
Dec-14-20
 
LLDPE is used in extrusion, blow molding film, roto-molding, injection molding for food-packaging, frozen food, floor-heating pipes, stretch film, cosmetics, and drugstore, etc. Besides, LLDPE is widely used as a carrier in masterbatch production.
VERIFIED
Jan-05-21

Quicklime (Lime)

$90
MOQ: Not Specified
 
calcium oxide (CaO), or commonly referred to as quicklime, is a high calcium content derivative of our 98.5% pure calcium carbonate (limestone). Calcium oxide is produced by heating calcium carbonate to 2000 degrees F where carbon dioxide disassociates as a gas from the calcium carbonate:
{CaCO3} + Heat = {CaO} + {CO2}

Calcium oxide can be utilized in a variety of applications because of its physical and chemical qualities. Arij Global Trading quicklime is used in flue gas desulfurization, water and waste water treatment, steel, paper, chemical and environmental applications.
VERIFIED
Dec-13-20

Cement

$45
MOQ: Not Specified
 
It is obvious that Cement is a very useful binding substance in construction. The usage of cement over diverse fields of construction has made it a very significant civil engineering material.

Arij Global Trading is an Ordinary Portland Cement supplier connected to well respected Portland Cement manufacturers in the area. Our precious contacts in this industry empower us to comply with most inquiries for Portland cement at exceptionally competitive prices.

Ordinary Portland cement (usually referred to as OPC) has different types and classes for different uses and applications. We are a Portland Cement supplier who provides different types of this commodity from General purposes use to high sulfate resistance conditions; From Moderate Heat of Hydration to Low Heat of Hydration and high early strength cement depends on your demands. Arij Global Trading also provides all cement types based on their applicants.
VERIFIED
Dec-14-20
 
LDPE, which is generally colorless, translucent, flexible, odorless, tasteless plastic, is one of the most excellent properties of heat sealability and can be adhered at about 120 C. Because of this feature, it is widely used as an intermediate layer to connect two layers which do not stick to each other thermally in the coatings. It also has favorable properties such as being transparent and resistant to tearing, significantly reducing water vapor permeability, and significantly reducing its elasticity at low levels.
VERIFIED
Dec-14-20
 
When the polystyrene raw material contacts the water vapor, the pentane gas granules within the material are expanded. When these expanded gas granules adhere to each other, Expanded Polystyrene (EPS) is formed. It is used for packaging and heat insulation. The main uses of the expanded polystyrene that is preferred with its wide range of advantages are as follows:

* Signboard applications

* Electrical equipment

* Insulation materials

* Lighting fixtures

* Food packaging applications

* Foam containers

* Yogurt containers

* TV panels

* Stationery products
VERIFIED
Dec-13-20

Hydrated Lime

$120
MOQ: Not Specified
 
Hydrated Lime is a dry powder mainly composed of calcium hydroxide Ca(OH)2. It is a colorless or white powder, which is obtained by hydrating Quicklime (Calcium Oxide) using specific equipment called hydrator in a process called hydration. The process converts CaO to Ca(OH)2.

Actually, hydration is a chemical process in which water molecules combine with Quicklime.

CaO + H2O â?? Ca(OH)2 + Heat

Hydrated Lime has other common names like Slaked Lime, Caustic Lime, Builderâ??s Lime, and Slack Lime.



Applications for Hydrated Lime:

Water treatment
Waste treatment
Acid neutralization
Building
Fertilizer
Soil stabilization
Asphalt filler
Food additive
May-27-21
Supplier From Ruwi, Muscat, Oman
Sep-29-21
Supplier From Muscat, Oman
Jul-04-17
Supplier From Muscat, Oman
35 Heat Convectors Suppliers
Short on time? Let Heat Convectors sellers contact you.