LAP Joint Flanges are primarily employed with lap joint stubs, the combined initial cost of the two items being approximately one-third higher than that of comparable welding neck flanges. Their pressure-holding ability is little, if any, better than that of slip-on flanges and the fatigue life of the assembly is only one-tenth that of welding neck flanges. The chief use of lap joint flanges in carbon or low alloy steel piping systems is in services necessitating frequent dismantling for inspection and cleaning and where the ability to swivel flanges and to align bolt holes materially simplifies the erection of large diameter or unusually stiff piping. Their use at points where severe bending stress occurs should be avoided.
A wide range of end cap forged fittings that are engineered to precision at our vendor’s end. These fittings are made up of nickel alloy and are hot dip galvanized for increasing its service life. The testimony of quality of these fittings is mill test certificate as per EN 10204 / 3.1B, which can be provided with these fittings on the request of our clients.
A Threaded Flange is usually confined to a special application. The main benefit of a Threaded Flange is that it can be assembled without welding which makes it perfect for extremely high pressure services. Threaded Flange is unsuited for conditions involving temperature or bending stresses of any magnitude. Particularly under cyclic conditions where leakage through the threads may occur in relatively few cycles of heating or stress.
The wide range of steel pipe nipple offered by us is used as an extension to any pipe assembly. These are available in different diameters and thicknesses that meet the different application requirements of numerous industries. Our range is appreciated for quality features like robust construction, corrosion resistance, and accurate dimension. These are widely used across automotive, paper, cement, chemical, pharmaceuticals, and engineering related industries. In addition to this, our precision engineered range of steel pipe nipples is available in customized finishes as per the client’s demands.
Pressure : 2000Lbs, 3000Lbs, 6000Lbs, 9000Lbs
Specification : Elbow, Tee, Cross, Square plug, Hexgean Plug, Nipple, Cap, Coupling, Outlet for thread type & socket welding.
Material : Carbon Steel, Stainless Steel
Size Rate : from 1/8 to 6
Standard : DIN, ASME B 16.11, JIS
Thread : ISO, DIN, NPT, BSPT
Features :
Durable
High tensile strength
Resistant to temperature
Great finish
Dimensionally accurate
With the help of our proficient team, we are engaged in offering a wide range of couplings to our valued clients. These are available in different grades and sizes to meet the demands of automotive, paper & print and allied engineering industries. Our range of couplings is highly durable, resistant to corrosion and provides high end functionality.Features:
Dimensional accuracy
High efficiency
Corrosion resistance
Durable
Excellent finish
1050 Construction Household Furnishing Suppliers
Short on time? Let Construction Household Furnishing sellers contact you.
We supply a quality range of Cross Fittings, which is widely used in various industries for torque free sealing in any piping or tubing connection. These are well design from stainless steel and using latest technology and is been procured from reliable vendors. Our range of product is highly appreciated for its excellent finishes, superior quality, flawless performance, easy installation and removal. We offer these to our clients at competitive prices and various specific treading and sizes.
Specifications:
Name : L/R & S/R ELBOW, TEE, CONCENTRIC AND ECCENTRIC REDUCERS, REDUCING ELBOW & TEE, CROSS, CAPS, etc.
Standard : SO, ANSI/ASME, MSS, JIS, DIN, BS etc.
Material : CARBON STEEL & STAINLESS STEEL
Size Range :1/248
Thickness :STD, XS, XXS.SCH10, 20, 30, 40, 60, 80, 160
We hold expertise in offering a vast range of Reducing Tee in different sizes and thickness to suit the requirements of clients. These are manufactured using stainless steel, carbons steel, alloy steel, monel, nickel, inconel, hastelloy, copper, brass and titanium. Our range finds applications in various industries and conforms to the international quality standards.
Features :
Long service life
Dimensionally accurate
High strength
Corrosion
Resistance
Specifications:
Name : L/R & S/R ELBOW, TEE, CONCENTRIC AND ECCENTRIC REDUCERS, REDUCING ELBOW & TEE, CROSS, CAPS, etc.
Standard : SO, ANSI/ASME, MSS, JIS, DIN, BS etc.
Material : CARBON STEEL & STAINLESS STEEL
Size Range :1/248
Thickness :STD, XS, XXS.SCH10, 20, 30, 40, 60, 80, 160
We are engaged in manufacturing and exporting of screwed fittings, which have gained appreciation for durability and trouble free performance. Offered in host of sizes, material grades and thickness, these are extensively used in several industries for corrosion resistance and excellent finish. We also customize our range as per the requirements of our customers.
The Screwed Fittings manufactured at our units is masterpiece in true sense. Its rugged construction has made us one the most accountable Manufacturers & Suppliers of Stainless Steel Screwed Fittings all over the world..
150L, BS, NPT, DIN Threaded Fittings, All fitting dimensions conform to ANSI B 16.3, Material per ASTM A351 CF8[304] & CF8M, threads conform to ANSI B 2.1
We are engaged in manufacturing and exporting of screwed fittings, which have gained appreciation for durability and trouble free performance. Offered in host of sizes, material grades and thickness, these are extensively used in several industries for corrosion resistance and excellent finish. We also customize our range as per the requirements of our customers.
The Screwed Fittings manufactured at our units is masterpiece in true sense. Its rugged construction has made us one the most accountable Manufacturers & Suppliers of Stainless Steel Screwed Fittings all over the world..
150L, BS, NPT, DIN Threaded Fittings, All fitting dimensions conform to ANSI B 16.3, Material per ASTM A351 CF8[304] & CF8M, threads conform to ANSI B 2.1
Our range of stainless steel ring joint flanges is highly appreciated for strength, durability, reliability, corrosion resistance and close tolerances. These stainless steel ring joint flanges conform to various Indian and international quality standards. Used in a number of industries, these stainless steel ring joint flanges are supplied in various dimensional specifications.
We are supplying a comprehensive range of superior quality Cross Tee Fittings at affordable prices. Used in industries like construction works, oil and gas sector, chemical units and automotive industry among others, our products are known for their high functionality, corrosion resistance, sturdy designs, durability and robust construction. These products can be customized according to the specifications provided by the clients.
Pressure : 2000Lbs, 3000Lbs, 6000Lbs, 9000Lbs
Specification : Elbow, Tee, Cross, Square plug, Hexgean Plug, Nipple, Cap, Coupling, Outlet for thread type & socket welding.
Material : Carbon Steel, Stainless Steel
Size Rate : from 1/8 to 6
Standard : DIN, ASME B 16.11, JIS
Thread : ISO, DIN, NPT, BSPT
Features:
Durable
High tensile strength
Resistant to temperature
Great finish
Dimensionally accurate
The wide range of Plug offered by us is available in various sizes and shapes. These are manufacture using stainless steel and carbon steel and are mainly used to close the end of the pipes. The plugs are similar to cap but fitted inside the fittings and find applications in various industries.Features :
High strength
Corrosion resistance
Durability
Dimensionally accurate
Pressure : 2000Lbs, 3000Lbs, 6000Lbs, 9000Lbs
Specification : Elbow, Tee, Cross, Square plug, Hexgean Plug, Nipple, Cap, Coupling, Outlet for thread type & socket welding.
Material : Carbon Steel, Stainless Steel
Size Rate : from 1/8 to 6
Standard : DIN, ASME B 16.11, JIS
Thread : ISO, DIN, NPT, BSPT
Features :
Durable
High tensile strength
Resistant to temperature
Great finish
Dimensionally accurate
We are involved in offering wide range of Reducing Elbow, which is used for joining tubes and pipes. These are sourced from certified manufacturer and are made with high quality stainless steel. Our clients can avail these from us in variety of specific sizes, grades, threading and pressure ratings. These are well tested on various parameters before making its final delivery to our respected customers.
Specifications:
Name :L/R & S/R ELBOW, TEE, CONCENTRIC AND ECCENTRIC REDUCERS, REDUCING ELBOW & TEE, CROSS, CAPS, etc.
Standard :ISO, ANSI/ASME, MSS, JIS, DIN, BS etc.
Material :CARBON STEEL & STAINLESS STEEL
Size Range :1/2-48
Thickness :STD, XS, XXS.SCH10, 20, 30, 40, 60, 80, 160
We are offering our clients with concentric / eccentric reducers that are used in petrochemical, power, nuclear and electronic industries. Known for their close tolerances, these stainless steel concentric and eccentric reducers are designed with precise configurations. These reducers are ideal for critical applications that involve high pressure, impulse, vibration and temperature.
Specifications:
Name : L/R & S/R ELBOW, TEE, CONCENTRIC AND ECCENTRIC REDUCERS, REDUCING ELBOW & TEE, CROSS, CAPS, etc.
Standard : ISO, ANSI/ASME, MSS, JIS, DIN, BS etc.
Material : CARBON STEEL & STAINLESS STEEL
Size Range : 1/2 -48
Thickness : STD, XS, XXS.SCH10, 20, 30, 40, 60, 80, 160
