Please click here to check who's online and chat with them.

Find Verified Cocktail Sets Suppliers, Manufacturers and Wholesalers

Top Supplier Cities : -   Murtafa   Muscat  
GOLD Member
Jun-04-26
 Inquire Now  
PRODUCT:

The scalp vein needle is mainly for clinical use, matched with a disposable infusion (transfusion) device or syringe for human intravenous infusion of medicine (blood) liquid. Single wing design, meets different requirements of clinical operation, easy to fix, specification identified by the color of the wing, easy to distinguish and use.

Specifications:
Material: Epicranial needles and tubes: Non-toxic medical grade PVC, ISO 10993 Connector: Non-toxic medical grade ABS, ISO 10993
Tube packaging seal: Non-toxic medical grade polyethylene, free from latex and phthalates
Biocompatibility: In accordance with ISO 10993 standard
Device type: Single-use medical device
Sterilization method: Ethylene oxide in accordance with ISO 11135 standard
Quality Control: Quality control during the process and on the finished product in accordance with ISO 2859 standard
Packaging: Micro infusion set in a pouch or in a blister pack packaged in boxes
Storage Instructions: Store in a cool, dry place away from chemicals
Shelf Life: 5 years from the production date in undamaged packaging
Packaging Material: Blister: Low-density polyethylene film Box: Cardboard, Packaging: Corrugated cardboard

Size Length Width
19G 19 0.09mm
20G 19 0.09mm
21G 19 0.08mm
22G 19 0.07mm
23G 19 0.06mm
GOLD Member
Jun-04-26
 Inquire Now  
Product:

IV cannula catheter is a technique in which a cannula is placed inside a vein to provide venous access. Venous access allows sampling of blood as well as administration of fluids, medications, parenteral nutrition, chemotherapy, and blood products.

Specifications:
Material: Catheter: FEP (Perfluoroethylene and Propylene Copolymer + BaSO4) Catheter Hub: Polypropylene
Packing Piece: POM (Polyoxymethylene) - Packing Piece: POM (Polyoxymethylene)
Lubricant: Aminofunctionalized Polydimethylsiloxane Copolymer
Biocompatibility: According to the ISO 10993 standard
Device type: Single-use medical device
Sterilization method: Ethylene oxide in accordance with ISO 11135 standard
Quality Control: Quality control during the process and on the finished product in accordance with ISO 2859 standard
Packaging: Catheter in blister pack package in boxes
Storage Instructions: Store in a cool, dry place away from chemicals
Shelf Life: 5 years from the production date in undamaged packaging
Packaging Material: Blister: Medical paper - Blister: Low-density polyethylene film - Box: Cardboard

Size Length Width
14G 2.0 55
16G 1.6 55
18G 1.2 45
20G 1.0 33
22G 0.8 25
24G 0.7 19
GOLD Member
Jun-04-26
 Inquire Now  
Sterile Paraffin Gauze
Tull Soin

PRODUCT:

Paraffin Gauze Sterile is made from medical degreased gauze or non-woven together with Vaseline. It can lubricate the skin and protect it from cracks. It is widely used on clinics.

Specifications:
Material: 100% gauze with vaseline
Design: Facilitates air circulation and hastens healing
Application: Scratch and wound - second degree burns and skin plant Surgery of nails - Surgical wound - Chronic wound: bed sore, leg ulcer, DIAB, etc.
Advantages: Not to adhere to the wound. Remove without pain. No blood - Accelerate the healing at appropriate moisture environment.
Convenient to use. No oil feeling - Soft and comfortable to use. Especially use on hands, feet, limbs and other parts which are difficult to fix .

Size Length Width
10 cm2 10cm 10cm
GOLD Member
Jun-04-26
 Inquire Now  
Nitrile Examination Gloves, Powder Free
Medical, Care, and Hygiene Sector
Two-way protection

PRODUCT:

Fifty human dentin discs were obtained from intact third molars and randomly assigned into two control groups and three treatment groups. The first control group received no treatment. The second control group (no medicament group) was irrigated with sodium hypochlorite (NaOCI), stored in a humid environment for four weeks and then irrigated with ethylenediaminetetraacetic acid (EDTA). The three treatment groups were irrigated with NaOCl, treated for four weeks with either 1 g/mL triple antibiotic paste (TAP), 1mg/mL methylcellulose-based triple antibiotic paste (DTAP), or calcium hydroxide [Ca(OH)2] and finally irrigated with EDTA. After treatment, one half of each dentin disc was subjected to Vickers microhardness (n= 10 per group) and the other half was used to evaluate the chemical structure (phosphate/amide I ratio) of treated dentin utilizing attenuated total reflection Fourier transform infrared spectroscopy (n = 5 per group). One-way ANOVA followed by Fisher.

Specifications:
Design: Rolled edge, ambidextrous, roughened surface
Material: Nitrile material mixture
Strength Sleeve (min): 0.12-0.14
Strength Palme (min): 0.17-0.17
Strength Finger (min): 0.18-0.20
Tensile Strength: 6N min (before aging), 6N min (after aging). 800% min (before aging), 760% min (after aging)
Risk Analysis: Protein Free
Quality Standards: Certification according to DIN EN ISO9001 DIN EN ISO 455-1/-2/-3/-4 ISO 14001, ISO 13485 and ISO 11135
Quality Controls: Production according to GMP - Permanent control of production lots, Random check up by supervisors - Inspection report before shipment
Marketing: Traceability by LOT numbers

Size Length Width
S 240-250 80-85
M 240-250 90-95
L 240-250 100-105
XL 240-250 110-115
GOLD Member
Jun-04-26
 Inquire Now  
Vinyl Examination Gloves, Powder Free
Medical, Care, and Hygiene Sector
Two-way protection

PRODUCT:

Fifty human dentin discs were obtained from intact third molars and randomly assigned into two control groups and three treatment groups. The first control group received no treatment. The second control group (no medicament group) was irrigated with sodium hypochlorite (NaOCI), stored in a humid environment for four weeks, and then irrigated with ethylenediaminetetraacetic acid (EDTA). The three treatment groups were irrigated with NaOCl, treated for four weeks with either 1 g/mL triple antibiotic paste (TAP), 1mg/mL methylcellulose-based triple antibiotic paste (DTAP), or calcium hydroxide [Ca(OH)2], and finally irrigated with EDTA. After treatment, one half of each dentin disc was subjected to Vickers microhardness (n= 10 per group), and the other half was used to evaluate the chemical structure (phosphate/amide I ratio) of treated dentin utilizing attenuated total reflection Fourier transform infrared spectroscopy (n = 5 per group). One-way ANOVA followed by Fisher.

Specifications:
Design: Rolled edge, ambidextrous, roughened surface
Material: PVC material mixture
Strength Sleeve (min): 0.12-0.14
Strength Palme (min): 0.17-0.17
Strength Finger (min): 0.18-0.20
Tensile Strength: 6N min (before aging), 6N min (after aging). 800% min (before aging), 760% min (after aging)
Risk Analysis: Protein Free
Quality Standards: Certification according to DIN EN ISO9001 DIN EN ISO 455-1/-2/-3/-4 ISO 14001, ISO 13485 and ISO 11135
Quality Controls: Production according to GMP - Permanent control of production lots, Random check up by supervisors - Inspection report before shipment
Marketing: Traceability by LOT numbers

Size Length Width
S 240-250 80-85
M 240-250 90-95
L 240-250 100-105
XL 240-250 110-115
40 Cocktail Sets Suppliers
Short on time? Let Cocktail Sets sellers contact you.
GOLD Member
Jun-04-26
 Inquire Now  
Latex-Examination Gloves, Prepowdered
Medical, Care, and Hygiene Sector
Two-way protection

PRODUCT:

Fifty human dentin discs were obtained from intact third molars and randomly assigned into two control groups and three treatment groups. The first control group received no treatment. The second control group (no medicament group) was irrigated with sodium hypochlorite (NaOCI), stored in a humid environment for four weeks, and then irrigated with ethylenediaminetetraacetic acid (EDTA). The three treatment groups were irrigated with NaOCl, treated for four weeks with either 1 g/mL triple antibiotic paste (TAP), 1mg/mL methylcellulose-based triple antibiotic paste (DTAP), or calcium hydroxide [Ca(OH)2], and finally irrigated with EDTA. After treatment, one-half of each dentin disc was subjected to Vickers microhardness (n = 10 per group), and the other half was used to evaluate the chemical structure (phosphate/amide I ratio) of treated dentin utilizing attenuated total reflection Fourier transform infrared spectroscopy (n = 5 per group). One-way ANOVA followed by Fisher.

Specifications:
Design: Rolled edge, ambidextrous, roughened surface
Material: Latex material mixture
Strength Sleeve (min): 0.12-0.14
Strength Palme (min): 0.17-0.19
Strength Finger (min): 0.18-0.20
Tensile Strength: 6N min (before aging), 6N min (after aging). 800% min (before aging), 760% min (after aging)
Risk Analysis: Acc. *Loery Method 18,9 ug protein /g of glove Acc. *HPLC Method 10,9 ug protein /g of glove
Quality Standards: Certification according to DIN EN ISO9001 DIN EN ISO 455-1/-2/-3/-4, ISO 14001, ISO 13485 and ISO 11135
Quality Controls: Production according to GMP - Permanent control of production lots Random check up by supervisors - Inspection report before shipment
Marketing: Traceability by LOT numbers
Packing: Hygienically packed in a dispenser, 100 pieces each, 1000 pieces in each carton
Special Remarks: Not suitable for dangerous materials (especially aggressive materials)

Size Length Width
S 240-250 80-85
M 240-250 90-95
L 240-250 100-105
XL 240-250 110-115
GOLD Member
Jun-04-26
 Inquire Now  
Latex-Surgical Gloves, Prepowdered
Medical, Care, and Hygiene Sector
Two-way protection

PRODUCT:
Fifty human dentin discs were obtained from intact third molars and randomly assigned into two control groups and three treatment groups. The first control group received no treatment. The second control group (no medicament group) was irrigated with sodium hypochlorite (NaOCI), stored in a humid environment for four weeks, and then irrigated with ethylenediaminetetraacetic acid (EDTA). The three treatment groups were irrigated with NaOCl, treated for four weeks with either 1 g/mL triple antibiotic paste (TAP), 1mg/mL methylcellulose-based triple antibiotic paste (DTAP), or calcium hydroxide [Ca(OH)2], and finally irrigated with EDTA. After treatment, one half of each dentin disc was subjected to Vickers microhardness (n = 10 per group), and the other half was used to evaluate the chemical structure (phosphate/amide I ratio) of treated dentin utilizing attenuated total reflection Fourier transform infrared spectroscopy (n = 5 per group). One-way ANOVA followed by Fisher.

Specifications:
Design: Rolled edge, ambidextrous, roughened surface
Material: Latex material mixture
Strength Sleeve (min): 0.22 min
Strength Palme (min): 0.26 min
Strength Finger (min): 0.32 min
Tensil Strength: 9N min (before aging), 9N min (after aging). 800% min (before aging), 760% min (after aging)
Risk Analysis: Acc. *Loery Method 18,9 ug protein /g of glove Acc.
HPLC Method 10,9 ug protein /g of glove
Sterilization: Ethylene Oxide
Quality Standards: Certification according to DIN EN ISO9001 DIN EN ISO 455-1/-2/-3/-4 ISO 14001, ISO 13485 and ISO 11135
Quality Controls: Production according to GMP - Permanent control of production lots Random check up by supervisors - Inspection report before shipment
Marketing: Traceability by LOT numbers
Packing: Wrapped by 1 pair in a cleanroom of class C, every 50 pairs are packed in box of 50 pairs, then in a 500-pairs carton


Size Length Width
6.5 280-290 80-85
7 280-290 90-95
7.5 280-290 100-105
8 280-290 110-115
86.5 280-290 115-120
GOLD Member
Sep-26-23
 Inquire Now  
Salicylic cream
For oily and combination skin
1- A powerful ingredient to combat acne and works to soften and lighten the skin and whiten pigmentation.
2- Get rid of blackheads and whiteheads.
3- Exfoliation and renewal of skin cells and increases the skin's production of collagen.
4- Helps reduce skin sebum and get rid of clogged pores.
How to use:
1- Apply at night to clean skin.
2- Avoid exposure to the sun.
3- For a quick result, use the frankincense set.
(Frankincense lotion - frankincense spray - hyaluronic serum with frankincense)
Jun-13-23

Gypsum Powder

$47
MOQ: 270  Metric Tonnes
Supplier From Bousher, Muscat, Oman
 Inquire Now  
Material is supplied in 25KG P.P. Bags. The Purity (CaSO4 2H2O) of the Natural Gypsum Powder we supply is 95-96%. More details on the analysis upon request. The indicated price is per MT. Suitable for plastering and construction. Initial Setting Time: 9 to 10 Minutes Final Setting Time: 18 to 20 Minutes Whiteness : %95 Finesse (Mesh): Mesh 200
VERIFIED
Feb-22-24
 Inquire Now  
P700-HNC: Specifically designed for sanitary pads as a positioning adhesive, P700-HNC is a pressure-sensitive hotmelt that provides excellent adhesion and stability under various conditions. Like C650PH, it is optimized for high-speed application equipment but maintains effectiveness in mid-speed settings as well, offering versatility across different production lines.
Sep-16-17
 Inquire Now  
Bitumen (Penetration / Emulsion / Cutback):

Product Description:

Types of Bitumen based on their applications:

Based on their applications, bitumens can be divided into two groups:
1. road construction or thin bitumen
2. building bitumen (roof insulator) or hard bitumen

Price of product ( USD price or FOB price) :

About 90% of the produced bitumen is used in road construction activities and 10% of it is used for insulation applications.

Key Specifications/Special Features :

Penetration Grade :
ASTM D 946 - 40/50, 60/70, 80/100 
BS EN 12591 - 35/50, 50/70, 70/100

Viscosity Grade :
ASTM D3381-09 - AC10, AC20, AC30, AC40 
IS 73:2013 - VG10, VG20, VG30, VG 40

Performance Grade :
PG bitumen is bitumen which is graded based on its performance at different temperatures.

Natural Bitumen or Gilsonite :
Gilsonite in mass is a shiny, black substance, brittle and can be easily crushed into a dark brown powder.

Bitumen Emulsion :
Cationic Rapid Setting - CRS-1, CRS-2 
Cationic Slow Setting - CSS-1, CSS-1h

Cutback Bitumen :
Slow Curing - SC-70, SC-250, SC-800, SC-3000
Medium Curing - MC-30, MC-70, MC-250, MC-800, MC-3000
Rapid Curing - RC-70, RC-250, RC-800, RC-3000
Oct-24-24
 Inquire Now  
MST Tile Levelling System Achieve Perfect Tile Alignment with Ease

The MST Levelling System guarantees superior flatness between tiles by preventing unwanted movements during the mortar setting process. Its a fast, reliable, and 100% effective tool that simplifies tile installation, ensuring a smooth, lippage-free finish every time. Designed to save time and enhance the quality of your ceramic or stone laying, its perfect for both professionals and DIY enthusiasts.
Key Benefits:
Professional Finish: Delivers a flawless, perfectly aligned surface with no uneven edges between tiles.
Easier Grouting: The even surface achieved simplifies the grouting process, reducing time and effort.

Prevents Tile Cracking: Minimizes the risk of tiles cracking due to movement during mortar setting.

Level Installation: Ensures uniformity in height across tiles, giving a sleek and professional result.

Stronger Floor: Creates a durable, long-lasting surface by ensuring all tiles are firmly in place during installation.

Planning and Visualization: Helps you plan and visualize the final layout more accurately for a perfect finish.

Reduces Lippage: Eliminates unsightly lippage, resulting in a smooth, even surface without any raised tile edges.

Minimal Material Waste: Optimizes material usage by ensuring tiles are placed correctly, minimizing costly mistakes.

Improves Efficiency: Cuts down on installation time while improving the quality of the end result.
Whether you're a seasoned professional or tackling a DIY project, the MST Levelling System ensures a fast and precise installation process, making your tile-laying job easier, more efficient, and error-free.
GOLD Member
Apr-13-26
Supplier From Oman, Oman
 Inquire Now
Feb-13-21
 Inquire Now  
disposable blood in fusion sets
Needle size/25G-29G
Madein/Oman*MPM
Price/ $260 carton500pieces/20bag /bag25pcs
Certification/CE-ISO
Packaging/PEbsg/ blister
Supply abitiy/500000
Packaging details/package 25 pieces/bag/20bag/carton
VERIFIED
Dec-13-20

Bentonite

$100
MOQ: 200  Metric Tonnes
Sample Available
Supplier From Muscat, Oman
 Inquire Now  
Bentonite referred to as either Calcium Bentonite or Sodium Bentonite is generally one of the most multi-functional minerals. Basically, the inherent physical properties in Bentonite provide a wide range of industrial applications and since the Middle East is specifically rich in this mineral resource; therefore you can locate the best quality of varied grades of Bentonite in here. The quality and grade of Bentonites modifies their applications in particular. However, the demand for Bentonite varies significantly from country to country.

Our expert commercial team in Arij is well-prepared to supply from lump size to fine powder in suitable packaging for different sizes. Here are the major application areas of Bentonite:

Foundry: Building agents for special molding sands, Bindings agents for synthetic molding sands, core sands, binding agents for anhydrous casting sands and for thickening blackwashes.
Drilling Industry: Borehole scavenging for saltwater/Thixotropic suspensions for borehole scavenging
Building Industry: Supporting suspensions for cut-off diaphragm wall constructions and shield tunneling/subsoil sealing (e.g. dumps) anti-friction agents for pagejacking and shaft sinking additive for soil concrete, concrete and mortar.
Ceramics Industry: Plasticizing of ceramic compounds, Improvement of strength, fluxing agents.
Paint and Varnish: Thickening, Stabilizing and anti-setting agents for paints, varnishes, coating materials, sealing cement waxes and adhesives.
Ore Production Industry: Binding agents for ore pelletizing.
Paper Industry: Pigment and color developer for carbonless copying paper/adsorption of impurities in the white water system.
Jul-04-21
 Inquire Now  
We supply frozen whole chicken with bone and whole chicken without bone for shawarma, weights from 800 - 2400 g, as well as chicken breasts in packages of 2 kg, chicken Paws, chicken Feet, chicken MJW in packages of 20 kg and also Beef meat without bones in standard packages of 20 kg for the Middle East and North Africa, some Islamic countries, China and Vietnam, where we
have contracts with the best factories plants approved with SIF code numbers of approved in most countries of the world.

Specifications:

Grade: A

Washed and cleaned, no yellow skin, no feathers, no outer nail, 100% fresh and frozen, no bad smell, no excessive blood or blood stains, no black pad, no bruise, no chemical burns, broken bones less than 1%

Less than 1% moisture, less than 1% ice content

Shelf life: 24 months from production date

Freezing: BQF blasted at minus 40 C Storage at minus 18 C Transportation at 18-c

Country of origin: Brazil

Contract Length: (12 - 120) Months

Price: Variable as per the Quantity, type of sipping and destination port (Negotiable)

Minimum Quantity Order: for small orders is 50 FCL / Month.

The payment terms for the Trial Order OR Small orders (1 - 100) FCL/ Month :

Advanced payment to seller by telegraphic bank to bank transfer (T/T) after ICPO, SPA, NDA and against pre-forma invoice.

Last payment to Seller by telegraphic bank to bank transfer (T/T), within 48 hours Upon receipt of all shipping documents and bill of Lading prior to vessel departure to the destination Port.

The payment terms for the Main Order OR Large orders (101 - 301) FCL / Month :

100% Irrevocable, transferable, dividable and renewable Letter of Credit (DLC - CBLC) upon receipt of Performa Invoice

Payment shall be in USD or its equivalent and through one of the best 25 bank around the world.

Documentation:

Seller will provide the following documents to buyer:

a. Full set of clean on-board ocean Bill of Lading consigned to order of shipper,

Blank endorsed, marked Freight Prepaid, issued by the vessel company;

b. Certificate of Origin;

c. Signed Commercial Invoice;

d. Packing List, showing container number, and gross/net weight of each

Container;

e. Export Declaration, showing the actual loading date and the total weight of the

Cargo, B/L number, name of the loading port, discharging port and vessel name,

Certifying particulars of shipment;
VERIFIED
Feb-15-24
 Inquire Now  
TSG Granule Hotmelt Adhesive, Our TSG Granule Hotmelt Adhesive sets the standard for fast, reliable bonding in packaging and assembly lines. Its unique granular formula ensures easy handling and precise dosing, reducing waste and increasing efficiency. With a quick set time and strong bond strength, it's specifically designed for high-speed automated processes, providing secure sealing for packaging and durable bonding for furniture assembly.
Oct-15-26
Supplier From Salalah, Oman
 Inquire Now
Sep-03-25

Gypsum Plaster Powder, 200 mesh

$56 - $80 / Ton (US) (CIF)
MOQ: Not Specified
Supplier From Salalah, Dhofar, Oman
 Inquire Now  
Gypsum Plaster Powder (POP)

Chemical Composition:
Main Component: Calcium sulfate hemihydrate (CaSOO)
Purity: Typically 94-98%
Moisture Content: 0.5-1%

Physical Properties:
Color: White or off-white
Texture: Fine powder
Mesh Size: Usually 200 mesh (can vary based on requirements)
Bulk Density: 0.69-0.80 g/cm

Setting Time:
Initial set: 6-11 minutes (can be adjusted)
Final set: 20-35 minutes

Packaging:
20 - 25 kg bags (PP bags)
Aug-20-19
Supplier From Murtafa, Wilayath, Oman
 Inquire Now
Jun-16-03
Supplier From Muscat, Oman
 Inquire Now
May-28-26
Supplier From Surat, Oman
 Inquire Now
May-27-22

Women's V-Neck Solid Scrub Top

$10 - $19.90
MOQ: Not Specified
Supplier From Ruwi, Muscat, Oman
 Inquire Now  
Factory Direct Manufacturer Women's V-Neck Solid Scrub Top new style nurse uniform designs nurse scrubs uniforms MOQ: 30 Pcs
Printing Options: Heat Transfer, Silk Screen Printing,
Material: Micro Stretch, Interlock, Jeans
$10.00 - $19.90/Set
30.0 Sets(Min. Order)
Tulip Nursing Scrubs
Order yours Today.
Get it with your own logo.
Get it in your required sizes and Colors
We are direct manufacturers and suppliers of all types of Medical Apparel or Nursing scrubs clothing.
- Customize Scrubs (design and Sizes)
- Customize Scrub Jackets
- Scrub Undershirts
- Scrub Caps Hats
- Any Hospital Uniforms
- Embroidery Logo printing Labels.
Premium quality fabric and custom fabrics.
Polyester
Cotton
Polyester Spandex
Cotton Spandex
Blend fabric
Apr-06-23
 Inquire Now  
Next Generation Recycling Company is certified for Global Recycling Standards which is an international, voluntary, full product standard that sets out requirements for third-party certification of recycled content, chain of custody, social and environmental practices and chemical restrictions. The goal of the GRS is to increase use of recycled materials in products and reduce/eliminate the harm caused by its production.

We mainly supply the following besides the other range of products
All Transparent White
All Transparent Blue
All Transparent White 95/5
All Transparent White Blue Mix
Apr-06-23
 Inquire Now  
Next Generation Recycling Company is certified for Global Recycling Standards which is an international, voluntary, full product standard that sets out requirements for third-party certification of recycled content, chain of custody, social and environmental practices and chemical restrictions. The goal of the GRS is to increase use of recycled materials in products and reduce/eliminate the harm caused by its production.

We mainly supply the following besides the other range of products
All Transparent White
All Transparent Blue
All Transparent White 95/5
All Transparent White Blue Mix
Jul-20-26

Medical Syringes, Medical-grade Requirements

$1.20 - $2 / Piece (CIF)
MOQ: 20  Metric Tonnes
Supplier From Muscat, Oman
 Inquire Now  
We are a professional and experienced team specializing in the export and supply of medical products to markets around the world. Our company has built a strong international network of manufacturing partners, quality control processes, and logistics solutions that allow us to deliver medical supplies efficiently, safely, and on schedule to buyers across multiple continents.
Among our core products, we offer a full range of disposable medical syringes (various sizes, including 1ml, 2ml, 3ml, 5ml, 10ml, and 20ml), manufactured under strict quality standards and available in both standard and safety-lock designs. All products meet international medical-grade requirements and come with full documentation (CE, ISO, and other relevant certificates upon request).
What sets our team apart:

Years of combined experience in medical product export
Strong relationships with certified manufacturers
Flexible order volumes (from trial orders to bulk/container shipments)
Competitive pricing with transparent terms
Reliable logistics and on-time delivery to the Middle East, GCC, and beyond
Full support with documentation, customs, and shipping requirements

We understand the specific needs of buyers in Oman and the broader Gulf region and are committed to building long-term, trustworthy business relationships based on quality and reliability.
We would be glad to send you our product catalog, pricing list, and samples upon request. Please feel free to contact us with your requirements (product type, quantity, and destination), and we will respond promptly with a detailed quotation.
Apr-06-23
 Inquire Now  
GLOBAL RECYCLING STANDARD CERTIFIED
Next Generation Recycling Company is certified for Global Recycling Standards which is an international, voluntary, full product standard that sets out requirements for third-party certification of recycled content, chain of custody, social and environmental practices and chemical restrictions. The goal of the GRS is to increase use of recycled materials in products and reduce/eliminate the harm caused by its production.

We are manufacturers and mainly supply the following products besides other range

All Transparent White
All Transparent Blue
All Transparent White 95/5
All Transparent White Blue Mix
May-10-20

Electric Pizza Oven

$110
MOQ: Not Specified
Supplier From muscat, OM, Oman
 Inquire Now  
Electric Pizza Oven
Cooks a pizza between 6 8 minutes.
Setting temperature 50-320 c
Cooks up to a 12" (30.50cm) Pizza Base Size
Create a perfect, crispy base every time.
The see through front window allows you to check on your pizza without having to open the lid.
Pizza trays rotate between the elements to ensure an even cook, from the edge to the center.
Includes two removable bases, traditional ceramic stone or non-stick pizza pan
The side vent allows moisture to escape.
Compact design for easy storage.
Dec-02-19

Steel Railway Truck

$35
MOQ: Not Specified
 Inquire Now  
Steel quality: prime grade cold rolled steel, as per JIS G 3141 SPCC-SD
Capacity: 208 liters,
Steel Thickness (body): 0.7mm - 1.4 mm
Steel thickness (top& bottom): 0.7mm-1.4mm
External height: 883mm +/- 3mm
External diameter: 585 mm +/-3mm
Internal diameter: 580mm +/-mm
Hoops: Two rolling hoops
Corrugation: set of 4 corrugations on either side or rolling hoops expanded in the body
Bungs size: .(large) 2*
Bungs size: (small) 3/4"
16 kg .
Mar-13-21
Supplier From Muscat, Oman
 Inquire Now
Jun-24-10
Supplier From Al Khuwair, Muscat, Oman
 Inquire Now
Dec-02-15

Asset Management Software

$2.00M
MOQ: Not Specified
 Inquire Now  
Computerized asset management software is a practice that involves managing and optimizing the purchasing, deployment, maintenance and disposal of software applications within an organization. These asset management software usually involves gathering detailed hardware and software management information and which is used to make important decision making about the purchase and distribution of hardware and software. Organizations that develop and maintain an effective it asset management program that minimizes the risk and less accurate information. Cams has some common set of goals are improves it service to end users, creates standards and process for managing assets. Our sunsmart established this service since 2005 and customers got satisfied with our services. For more details, visit our website @ http://sunsmartglobal.Com/cams-asset-management-software-dubai-uae-qatar-usa-london-india.Aspx
May-10-20

Spit Washer Machine As300V

$2.58K
MOQ: Not Specified
 Inquire Now  
Spit Washer Machine AS300V:
This machine is used to washing kebab spits without manual task.
Specifications and advantages of full-steel triple layer skewer washing machine
Model AS300V:
- To observe the principles of health and full washing of skewers without remaining any spot or fat.
- Set output: to wash 300 skewers in 20 minutes.
- It does not require any skilled worker.
- It save water and washing timer.
- After fully washing the skewers, the machine shall be automatically turn off.
- As it is triple layers, it has the lowest acoustic pollution.
Technical specification of full-steel triple layer skewer washing machine
Model AS300V:
- Machine dimension: length 135 cm, width 52 cm and height 88 cm.
- All parts are made of stainless steel.
- Machine cover is made stainless steel sheet.
- The engine power is transferred bye gear box.
- Electromotor power 1HP.
- It has water vacation hose.
- It is equipped with timer and conductor.
Jun-08-25

Copper Isotope Powder, 99.9999 %

$145 - $250 / Gram (EXW)
MOQ: Not Specified
 Inquire Now  
Copper Isotope Powder



- - IGAS Certified -99.998% Produced in Germany - EU Warehouse: Romania 145 USD$ per Gram â?? 20 ton
- - IGAS Certified -99.9999 % Produced in Russia - EU Warehouse: Switzerland 300 USD$ per Gram-20 ton
- - IGAS Certified -99.9999 % Produced in Russia - UAE Warehouse: Dubai 250 USD$ per Gram- 1 ton
- (ICP-OES verified) - 99,9998% Origin: Switzerland - EU Warehouse: Geneva 250 USD$ per Gram- 30 ton
- (ICP-OES verified) - 99.998% Particle size 2.5 micrometres- - Ukrainian Warehouse 150 USD$ per Gram- 120 kg
At HAAB Direct Source, we serve as a trusted platform where verified suppliers of sensitive and high-value products, such as copper isotopes, present their official offers with full transparency.
We're proud to announce the onboarding of a new suppliers offering nano-particle copper isotope powder now available at a breakthrough price that outperforms the global marketâ??without compromising on quality.

We officially represent distinct clients with verified stock across Switzerland, Ukraine, Turkey, UAE, Iran, and other key locations. Each operates independently, setting prices based on their own production capabilities and investment levels.
For verified buyers or labs seeking high-purity isotopes for industrial or research use, feel free to connect directly.
Jun-27-23
Supplier From Muscat, Oman
 Inquire Now
Supplier Of Shawls   |   Woolen Clothing/Sweater   |   Scarves/Stoles   |   Socks   |   Hats and Caps   |   Gloves   |   Cotton   |   Blankets   |   Sweaters   |   Caps   |   Scarves   |   Stoles
Jul-07-21

Cassette Fan Coil

MOQ: Not Specified
Supplier From Muscat, Oman
 Inquire Now  
With multi-direction air flow supply, automatic swing wind, users can set auxiliary wind gap to send part of air to other place, so as to improve the indoor temperature and the air flow uniformity. System adopts big diameter vortex centrifugal fan to make running silently, and optional anion generator to make pure and fresh indoor air.

Ultrathin frame, min-thickness for frame is only 260mm, users can chose installation direction for connection pipe depending on spot situation, the overall dimension for part of unit is only 590x590mm easy installation with low installation cost.

Remote control is available, flexible control method.

High lift water pump design (750mm); Disposal of condenser water pipes is easy and flexible.

Water level switch protection ensures no water leakage, water in the discharge pan can be
discharged manually; and the water holder pan is designed with discharge hole, which can
discharge the remaining condenser water on time, so as to reduce the possibility for bacteria growth, meanwhile discharging dirt in the regular time reduces clogging probability for water pump.

â??Câ?? type heat exchanger can aid terminal air flow and the uniformity for cooling system, the effect for 4-way air-out can be more balanced, and system leak out possibility can be lower. Hydrophile aluminum coil fin can greatly reduce condensation water remaining on the fin, therefore it reduces the windage and the effect for heat exchange is also improved.

Available for BMS concentrate intelligent control system. And some more designs for easy installation including built-in water valve (optional) for easy exterior connection installation, hand protection grilling and stainless steel soft pipe connection.
Aug-24-22
Supplier From Oman
 Inquire Now
Oct-29-26
Supplier From Sialkot, Punjab, Oman
 Inquire Now
Feb-24-15
Supplier From Ruwi, Muscat, Oman
 Inquire Now
Jul-07-21
 Inquire Now  
In all TI UNIT air handling units the frames are from aluminum profiles while the chassis and body panels are made from galvanized steel sheets in appropriate thicknesses.
All units are completely painted in the proper thickness.

Blower(S):
Double width-double inlet centrifugal fans with forward curved blades are normally used for low pressure drop requirements as opposed to fans with backward curved blades which are for high pressure drop applications. Fans and housings are made of galvanized steel each set off a plus other related components such as shafts are statically and dynamically balanced, shafts are selected from proper material and size. Other power transmission components such as pulleys and belts are also suit ably chosen depending on the required fan speed and electric motor power.
Fan(s) and the corresponding electric motor(s) are installed on an independent chassis which is itself installed on the main chassis using vibration dampers in order to eliminate transfer of vibrations to the structure. To further reduce the effects of vibrations, fan outlet (s) are also connected to the structure via flexible material such as canvous.
All 380V/3/50Hz electric motors are selected with insulation class of (f) and ingress protection of (IP- 54). Electric motors with ingress protection of (IP- 55) are also available upon request.

Coil (S):
Cooling and heating coils or either one of the two depending on the Requirement May be installed. Cooling coils are available in two, types of chilled water and direct expansion (D.X.) as per clients requirements. The chilled water coils are constructed of 5/8 O.D copper tubes plate finned (8, 10, 12 or 14 FPI) in aluminum or copper upon request.
The D.X. Coils are constructed of 3/8 OD copper tubes also plate finned (10, 12 or 14 FPI) in aluminum or copper as required. The chilled water for cooling coils in to be supplied by a water chiller and in the D.X. coils cooling is provided through the use of refrigerant such as R-22, R-407c or R-134a. Chilled water coils may be requested in 4 or 6 rows and as to the D.X. coils, they are available in 4 or 6 row configurations. Heating coils are available in two types of hot water and steam. The hot water coil similar to chilled water coil is offered in 1 or 2 row configurations. Steam heating coils are constructed of 1/2 seamless steel pipe spiral finned in aluminum or copper. Coils in 1 & 2 -row configurations are available upon request.

Mixing box:
Fresh and return air streams are mixed in the mixing box .An independent air damper is included for each air stream. Air Dampers are manufactured from aluminum in opposed blade configuration and are air sealed through the use of rubber strip gasket. Damper actuators ma y be easily installed when required. Washable aluminum filter modules 2 inches in thickness are arranged in (V) type configuration inside these boxes. Housing for
40 Cocktail Sets Suppliers
Short on time? Let Cocktail Sets sellers contact you.
  • First page
  • Next
Explore Cocktail Sets related import export discussions