Find Verified Automobile Gear Boxes Suppliers, Manufacturers and Wholesalers

Product Grade Base Oil - Group I / Group II

Product Detailed Description

Base Oil is a refined petroleum product used as a primary raw material in the production of lubricants, automotive oils, industrial oils, hydraulic fluids, gear oils, and other specialized lubricant formulations. Available grades can be supplied according to viscosity, performance requirements, and applicable industry specifications. Bulk international B2B supply is subject to product availability, agreed specifications, inspection, quantity, and delivery terms.

Packaging Details

Production Capacity

As per confirmed order and product availability

Country Where Product Is Manufactured

Oman (only if this is the actual country of origin)

Product Standards

API / ASTM / Applicable Base Oil Specification

Key Specifications 1

Base Oil Group: Group I / Group II, subject to availability and buyer requirements.

Key Specifications 2

Viscosity, viscosity index, sulfur content, flash point, pour point, and other properties according to the specified grade.

Key Specifications 3

Used in automotive lubricants, industrial lubricants, hydraulic oils, gear oils, engine oils, and specialty lubricant formulations.

Key Specifications 4

Available in bulk or drum packaging for international B2B supply, with specifications and delivery arrangements tailored to buyer requirements.

Key Advantage 1

Versatile raw material for manufacturing a wide range of automotive and industrial lubricants.

Key Advantage 2

Available in different grades and viscosity ranges to meet specific formulation requirements.

Key Advantage 3

Product quality can be verified through agreed specifications, laboratory testing, and independent inspection where required.

Key Advantage 4

Flexible bulk and packaged supply options with international delivery arrangements based on buyer requirements.

Product:

IV cannula catheter is a technique in which a cannula is placed inside a vein to provide venous access. Venous access allows sampling of blood as well as administration of fluids, medications, parenteral nutrition, chemotherapy, and blood products.

Specifications:
Material: Catheter: FEP (Perfluoroethylene and Propylene Copolymer + BaSO4) Catheter Hub: Polypropylene
Packing Piece: POM (Polyoxymethylene) - Packing Piece: POM (Polyoxymethylene)
Lubricant: Aminofunctionalized Polydimethylsiloxane Copolymer
Biocompatibility: According to the ISO 10993 standard
Device type: Single-use medical device
Sterilization method: Ethylene oxide in accordance with ISO 11135 standard
Quality Control: Quality control during the process and on the finished product in accordance with ISO 2859 standard
Packaging: Catheter in blister pack package in boxes
Storage Instructions: Store in a cool, dry place away from chemicals
Shelf Life: 5 years from the production date in undamaged packaging
Packaging Material: Blister: Medical paper - Blister: Low-density polyethylene film - Box: Cardboard

Size Length Width
14G 2.0 55
16G 1.6 55
18G 1.2 45
20G 1.0 33
22G 0.8 25
24G 0.7 19

PRODUCT:

The scalp vein needle is mainly for clinical use, matched with a disposable infusion (transfusion) device or syringe for human intravenous infusion of medicine (blood) liquid. Single wing design, meets different requirements of clinical operation, easy to fix, specification identified by the color of the wing, easy to distinguish and use.

Specifications:
Material: Epicranial needles and tubes: Non-toxic medical grade PVC, ISO 10993 Connector: Non-toxic medical grade ABS, ISO 10993
Tube packaging seal: Non-toxic medical grade polyethylene, free from latex and phthalates
Biocompatibility: In accordance with ISO 10993 standard
Device type: Single-use medical device
Sterilization method: Ethylene oxide in accordance with ISO 11135 standard
Quality Control: Quality control during the process and on the finished product in accordance with ISO 2859 standard
Packaging: Micro infusion set in a pouch or in a blister pack packaged in boxes
Storage Instructions: Store in a cool, dry place away from chemicals
Shelf Life: 5 years from the production date in undamaged packaging
Packaging Material: Blister: Low-density polyethylene film Box: Cardboard, Packaging: Corrugated cardboard

Size Length Width
19G 19 0.09mm
20G 19 0.09mm
21G 19 0.08mm
22G 19 0.07mm
23G 19 0.06mm

Shaft length : S: 381mm (15") | L: 508mm (20")
Starting system : Manual
Weight : S: 24kg | L: 25kg
Engine type : OHV
Fuel delivery system : Carburetor
No. of cylinders : 1
Displacement : 138cm3
Bore x Stroke : 60.4mm x 48mm
Maximum output : 4.4kW
Full throttle operating range : 4,750 - 5,750rpm
Steering : Tiller
Oil pan capacity : 0.7 litres

Ignition system : Digital CDI
Alternator : 12V 5A (optional)
Engine mounting : Bushing type
Trim method : Manual trim & tilt
Gear ratio : 1.92:1
Gear shift : F-N-R
Exhaust : Above prop hub exhaust
Propeller selection (pitch) : 6 - 7" (Alloy)
Fuel tank capacity : Integral 1L (remote connection)
Fuel : minimum 91 (RON) octane

DF 15 HP :- 4-stroke
Shaft length : S: 381mm (15")| L: 508 mm (20")
Starting system : Electric or manual
Weight : MS: 44.0kg | ML: 45.0kg | ES: 48.0kg | EL: 49.0kg | PTL: 55.5kg
Engine type : OHC 4-valve
Fuel delivery system : Electronic fuel injection
No. of cylinders : In-line 2
Displacement : 327cm3
Bore x Stroke : 60.4mm x 57mm
Maximum output : 11.0kW
Full throttle operating range : 5,000 - 6,000rpm
Steering : Remote | Tiller
Oil pan capacity : 1.0 litre

Ignition system : Digital CDI
Alternator : E: 12V 12A | M: 12V 6A (op.)
Engine mounting : Shear mount
Trim method : Manual trim & tilt | Power tilt
Gear ratio : 2.08:1
Gear shift : F-N-R
Exhaust : Through prop hub exhaust
Propeller selection (pitch) : 7"- 12" (Alloy)
Fuel tank capacity : Separate 12L
Fuel ; minimum 91 (RON) octane

DF 20 HP:- 4-stroke
Shaft length : S: 381mm (15") | L: 508 mm (20")
Starting system : Electric or manual
Weight : MS: 44kg | ML: 45kg | ES: 48kg | EL: 49kg | PTS: 52.5kg | PTL: 54.5kg | PTH: 55.5kg
Engine type : OHC 4-valve
Fuel delivery system : Electronic fuel injection
No. of cylinders : In-line 2
Displacement : 327cm3
Bore x Stroke : 60.4mm x 57mm
Maximum output : 14.7 kW
Full throttle operating range : 5,300 - 6,300rpm
Steering : Remote | Tiller
Oil pan capacity : 1.5 litres

Ignition system : Digital CDI
Alternator : E: 12V 12A | M: 12V 6A (op.)
Engine mounting : Shear mount
Trim method : Manual trim & tilt | Power tilt
Gear ratio : 2.08:1
Gear shift : F-N-R
Exhaust : Through prop hub exhaust
Propeller selection (pitch) : 7"- 12" (Alloy)
Fuel tank capacity : Separate 12L
Fuel : minimum 91 (RON) octane

DF 25 HP:- 4-stroke
Recommended Transom Height (inches) : S:15" L:20"
Starting System : Manual S /Electric S and L
Weight LBS : Manual S: 136.6 / Electric S: 143 - Electric, Tiller, Power Trim and Tilt L: 163
Engine Type : SOHC 4-Valve
Fuel Delivery System : Suzuki Battery-less Electronic Fuel Injection with Lean Burn Control
No. Of Cylinders : 3
Piston Displacement inches (cc) : 29.8 (489)
Bore X Stroke Inches (mm) : 2.80 x 2.68 ()
Maximum Output HP : 25
Operating Range (RPM : 5000 - 6000
Steering : Tiller/Remote
Choke : N/A - Suzuki Electronic Fuel Injection
Oil Pan Capacity quarts (liter) : 1.6 (1.5)

Wire Rod is used in the industry in two types of indented and plain with the size of 5.5 mm to 16 mm. Wire Rod is manufactured in the factories up to the size of 12 mm, and the higher sizes are produced according to the order.

Also, the indented wire rod is divided into two categories of A2 and A3.

Wire Rod is used for different products and is the raw material for the wire drawing units, fasteners, automobile components, and hardware manufacturers.

With a successful history of supplying and exporting steel products, we have effectively positioned Arij Global Trading to meet the various requirements of our clients in different countries with the highest standards of quality of Wire Rod.

Product Form:
1 KG UP - 10 KG BOX - FOB 3.20
1KG UP - 8 KG BOX - FOB 3.20
700/1000 GMS - 10 KG BOX - FOB 3.20
700/1000 GMS - 8 KG BOX - FOB 3.20
500/700 GMS - 10 KG BOX - FOB 3.10
500/700 GMS - 88 KG BOX - FOB 3.10
300/500 GMS - 10 KG BOX - FOB 3
200/300 GMS - 10 KG BOX -FOB 2.29

Product Form:
Sardine - Sardinella Longiceps
Frozen - Whole round / HGT / GT
10/15 PPK - 10&20 KG BOX

Rubber Process Oil (RPO) Tailored to enhance your rubber products, our RPO is the choice for those who demand flexibility, durability, and performance. It integrates seamlessly with various rubber compounds, delivering exceptional results in tires, automotive parts, and industrial rubber goods.

Moisturizes the face and removes pores

Gold face serum with 24c gold exfoliates and brightens and stretches the face

Moisturizing face mask with many benefits

Moisturizing day cream

Oliban Mouthwash, Refreshing mouthwash with the taste of frankincense

Men's Safety Footwear Or Men's Safety Shoes
a. Name of product Safety Shoe Style xxx (xxx will be the style no.)
b. Price of product - Will email excel file with prices mentioned along with style nos.
c. Product origin - Made In Oman
d. Key Specifications/Special Features
e. Minimum Order Size :10 Pairs/Carton
f. Packaging details : 1 Pair/Box, 10 Pairs/Carton

Latex-Surgical Gloves, Prepowdered
Medical, Care, and Hygiene Sector
Two-way protection

PRODUCT:
Fifty human dentin discs were obtained from intact third molars and randomly assigned into two control groups and three treatment groups. The first control group received no treatment. The second control group (no medicament group) was irrigated with sodium hypochlorite (NaOCI), stored in a humid environment for four weeks, and then irrigated with ethylenediaminetetraacetic acid (EDTA). The three treatment groups were irrigated with NaOCl, treated for four weeks with either 1 g/mL triple antibiotic paste (TAP), 1mg/mL methylcellulose-based triple antibiotic paste (DTAP), or calcium hydroxide [Ca(OH)2], and finally irrigated with EDTA. After treatment, one half of each dentin disc was subjected to Vickers microhardness (n = 10 per group), and the other half was used to evaluate the chemical structure (phosphate/amide I ratio) of treated dentin utilizing attenuated total reflection Fourier transform infrared spectroscopy (n = 5 per group). One-way ANOVA followed by Fisher.

Specifications:
Design: Rolled edge, ambidextrous, roughened surface
Material: Latex material mixture
Strength Sleeve (min): 0.22 min
Strength Palme (min): 0.26 min
Strength Finger (min): 0.32 min
Tensil Strength: 9N min (before aging), 9N min (after aging). 800% min (before aging), 760% min (after aging)
Risk Analysis: Acc. *Loery Method 18,9 ug protein /g of glove Acc.
HPLC Method 10,9 ug protein /g of glove
Sterilization: Ethylene Oxide
Quality Standards: Certification according to DIN EN ISO9001 DIN EN ISO 455-1/-2/-3/-4 ISO 14001, ISO 13485 and ISO 11135
Quality Controls: Production according to GMP - Permanent control of production lots Random check up by supervisors - Inspection report before shipment
Marketing: Traceability by LOT numbers
Packing: Wrapped by 1 pair in a cleanroom of class C, every 50 pairs are packed in box of 50 pairs, then in a 500-pairs carton


Size Length Width
6.5 280-290 80-85
7 280-290 90-95
7.5 280-290 100-105
8 280-290 110-115
86.5 280-290 115-120

Men's Safety Footwear Or Men's Safety Shoes
a. Name of product Safety Shoe Style xxx (xxx will be the style no.)
b. Price of product - Will email excel file with prices mentioned along with style nos.
c. Product origin - Made In Oman
d. Key Specifications/Special Features
e. Harmonization System (HS) Code : 64034000
f. Minimum Order Size :
g. Packaging details : 1 Pair/Box, 10 Pairs/Carton

Premium Iranian Saffron -Super Negin / Royal grade.

Hand-picked, naturally dried, strong aroma, vivid red threads.

Suitable for retail packs (1g, 2g, 5g) and bulk supply (250g, 500g, 1kg).

Over 50 years of family experience in saffron cultivation and export.

Moisture < 8%, Crocin > 240, Safranal > 30.

Packaging available in metal tins, glass jars, PET boxes, or bulk vacuum bags.

Consistent quality, competitive pricing, and reliable shipment worldwide.

Hot rolled carbon steel tubes in RHS (Rectangular Hollow Section) and SHS (Square Hollow Section) profiles for structural and fabrication applications. Produced to international standards for excellent dimensional accuracy, strength, and weldability. Available in multiple wall thicknesses and lengths to suit construction, industrial, and mechanical requirements. Smooth surface finish and uniform shape ensure ease of processing and long-term performance.