Find Verified Oils Suppliers, Manufacturers and Wholesalers

We are a direct mandate of a biggest brazilian cooperative of soybeans #2 non-gmo certified who is in the market since last 30 years and is authorized to export to china. We are able to supply large quantities of soybeans. Please let us know your quantity needed and we will send you a soft offer for the right quantity. We sell a minimum quantity of 50.000/mt.

Soft offer:
600.000/mt (12x50.000/mt) @ usd 235,00/mt - cif aswp

Please note: we pay commission of usd 1,00/mt, maximum 2% pb, no overprice & kickback!

Specification.: test weight .: (lbs/bu) 54 min

Protein .: 35.0% min.

Moisture content .: 13.5% max.

Splits .: 11.0% max.

Foreign matters .: 2.0% max.

Soybean other colour .: 2.0% max.

Heat damaged kernels .: 0.5% max.

Total dameged kernels .: 3.0% max.

Oil content .: 18.5% min.

Crop latest.

Packing bulk.

Origin brazil.

Available products: D2, D6, EN590, DIESEL 10PPM & 50PPM, JET A1/JP54, CRUDE OIL, BITUMEN, MAZUT M100, Copper.


Safe procedure and long-term cooperation - that is our motto. As an experienced team based in Berlin, with direct contacts to refineries and direct clients, I and my team ensure a smooth procedure.
For us, the customers are the focus of everything we do. To be successful, we need to know what our buyers need.
We want to ensure that we offer our buyers added value with our solutions. We meet our commitments and meet our deadlines and goals.

Send us LOI so that we can start processing the order.
If you have any questions please do not hesitate to contact us!

Available products:

-JET A1
-JET JP54
-Diesel D2 Automotive,
-EN590 10 PPM,
-Diesel D6,
-Diesel 10PPM & 50 PPM.
-Mazut M100
-Bitumen
-Crude Oil
-Copper

Available products: D2, D6, EN590, DIESEL 10PPM & 50PPM, JET A1/JP54, CRUDE OIL, BITUMEN, MAZUT M100, Copper.


Safe procedure and long-term cooperation - that is our motto. As an experienced team based in Berlin, with direct contacts to refineries and direct clients, I and my team ensure a smooth procedure.
For us, the customers are the focus of everything we do. To be successful, we need to know what our buyers need.
We want to ensure that we offer our buyers added value with our solutions. We meet our commitments and meet our deadlines and goals.

Send us LOI so that we can start processing the order.
If you have any questions please do not hesitate to contact us!

Available products:

-JET A1
-JET JP54
-Diesel D2,
-EN590 10 PPM,
-Diesel D6,
-BIODIESEL
-Mazut M100
-Bitumen
-Crude Oil
-Copper

Available products: D2, D6, EN590, DIESEL 10PPM & 50PPM, JET A1/JP54, CRUDE OIL, BITUMEN, MAZUT M100, Copper.


Safe procedure and long-term cooperation - that is our motto. As an experienced team based in Berlin, with direct contacts to refineries and direct clients, I and my team ensure a smooth procedure.
For us, the customers are the focus of everything we do. To be successful, we need to know what our buyers need.
We want to ensure that we offer our buyers added value with our solutions. We meet our commitments and meet our deadlines and goals.

Send us LOI so that we can start processing the order.
If you have any questions please do not hesitate to contact us!

Available products:

-JET A1
-JET JP54
-Diesel D2,
-EN590 10 PPM,
-Diesel D6,
-Mazut M100
-Bitumen
-Crude Oil
-Copper

Available products: D2, D6, EN590, DIESEL 10PPM & 50PPM, JET A1/JP54, CRUDE OIL, BITUMEN, MAZUT M100, Copper.


Safe procedure and long-term cooperation - that is our motto. As an experienced team based in Berlin, with direct contacts to refineries and direct clients, I and my team ensure a smooth procedure.
For us, the customers are the focus of everything we do. To be successful, we need to know what our buyers need.
We want to ensure that we offer our buyers added value with our solutions. We meet our commitments and meet our deadlines and goals.

Send us LOI so that we can start processing the order.
If you have any questions please do not hesitate to contact us!

Available products:

-JET A1
-JET JP54
-Diesel D2 Automotive,
-EN590 10 PPM,
-Diesel D6,
-Diesel 10PPM & 50 PPM.
-Mazut M100
-Bitumen
-Crude Oil
-Copper

Available products: LPG, LNG, STEAM COAL (4500-6700 kcal), D2, D6, EN590, DIESEL 10PPM & 50PPM, JET A1/JP54, CRUDE OIL, BITUMEN, MAZUT M100, Copper.


Safe procedure and long-term cooperation - that is our motto. As an experienced team based in Berlin, with direct contacts to refineries and direct clients, I and my team ensure a smooth procedure.
For us, the customers are the focus of everything we do. To be successful, we need to know what our buyers need.
We want to ensure that we offer our buyers added value with our solutions. We meet our commitments and meet our deadlines and goals.

Send us LOI so that we can start processing the order.
If you have any questions please do not hesitate to contact us!

Available products: CRUDE OIL, JET A1/JP54, D2, D6, EN590, DIESEL 10PPM & 50PPM, MAZUT M100, Copper,

Safe procedure and long-term cooperation - that is our motto. As an experienced team based in Berlin, with direct contacts to refineries and direct clients, I and my team ensure a smooth procedure.
For us, the customers are the focus of everything we do. To be successful, we need to know what our buyers need.
We want to ensure that we offer our buyers added value with our solutions. We meet our commitments and meet our deadlines and goals.

Send us LOI so that we can start processing the order.
If you have any questions please do not hesitate to contact us!

Available products:

JET A1
JET JP54
Diesel D2,
EN590 10 PPM,
Diesel D6,
Diesel 10PPM & 50 PPM.
Mazut M100
Bitumen
Crude Oil
Copper

Available products: MAZUT M100, JET A1/JP54, CRUDE OIL, D2, D6, EN590, DIESEL 10PPM & 50PPM, BITUMEN, Copper.


Safe procedure and long-term cooperation - that is our motto. As an experienced team based in Berlin, with direct contacts to refineries and direct clients, I and my team ensure a smooth procedure.
For us, the customers are the focus of everything we do. To be successful, we need to know what our buyers need.
We want to ensure that we offer our buyers added value with our solutions. We meet our commitments and meet our deadlines and goals.

Send us LOI so that we can start processing the order.
If you have any questions please do not hesitate to contact us!

Available products:

-JET A1
-JET JP54
-Diesel D2 Automotive
-EN590 10 PPM
-Diesel D6
-Diesel 10PPM & 50 PPM
-Mazut M100
-Bitumen
-Crude Oil
-Copper

Available products: STEAM COAL (4500-6700 kcal), D2, D6, EN590, DIESEL 10PPM & 50PPM, JET A1/JP54, CRUDE OIL, BITUMEN, MAZUT M100, Copper.


Safe procedure and long-term cooperation - that is our motto. As an experienced team based in Berlin, with direct contacts to refineries and direct clients, I and my team ensure a smooth procedure.
For us, the customers are the focus of everything we do. To be successful, we need to know what our buyers need.
We want to ensure that we offer our buyers added value with our solutions. We meet our commitments and meet our deadlines and goals.

Send us LOI so that we can start processing the order.
If you have any questions please do not hesitate to contact us!

Fertilizers provide three primary nutrients: Nitrogen (N), Phosphorus (P) and Potassium (K). Nitrogen supports vegetative growth. Phosphorus improves roots and flowering. Potassium strengthens resistance to environmental assaults, from extreme temperatures to pest attacks.

Urea is the most important nitrogenous fertilizer in the market, with the highest Nitrogen content (about 46 percent). It is a white crystalline organic chemical compound. Urea is neutral in pH and can adapt to almost all kinds of soils. It is a waste product formed naturally by metabolizing protein in humans as well as other mammals, amphibians and some fish. Urea is widely used in the agricultural sector both as a fertilizer and animal feed additive.

Available products: JET A1/JP54, CRUDE OIL, D2, D6, EN590, DIESEL 10PPM & 50PPM, BITUMEN, MAZUT M100, Copper.

Safe procedure and long-term cooperation - that is our motto. As an experienced team based in Berlin, with direct contacts to refineries and direct clients, I and my team ensure a smooth procedure.
For us, the customers are the focus of everything we do. To be successful, we need to know what our buyers need.
We want to ensure that we offer our buyers added value with our solutions. We meet our commitments and meet our deadlines and goals.

Send us LOI so that we can start processing the order.
If you have any questions please do not hesitate to contact us!

Available products:

-JET A1
-JET JP54
-Diesel D2,
-EN590 10 PPM,
-Diesel D6,
-Diesel 50 PPM.
-BIODIESEL
-Mazut M100
-Bitumen
-Crude Oil
-Copper

Available products: JET A1/JP54, CRUDE OIL, D2, D6, EN590, DIESEL 10PPM & 50PPM, BITUMEN, MAZUT M100, Copper.

Safe procedure and long-term cooperation - that is our motto. As an experienced team based in Berlin, with direct contacts to refineries and direct clients, I and my team ensure a smooth procedure.
For us, the customers are the focus of everything we do. To be successful, we need to know what our buyers need.
We want to ensure that we offer our buyers added value with our solutions. We meet our commitments and meet our deadlines and goals.

Send us LOI so that we can start processing the order.
If you have any questions please do not hesitate to contact us!

Available products:

-JET A1
-JET JP54
-Diesel D2 Automotive,
-EN590 10 PPM,
-Diesel D6,
-Diesel 10PPM & 50 PPM.
-Mazut M100
-Bitumen
-Crude Oil
-Copper

About Meltblown Nonwove
Melt blown is a one step process to make fabrics from polymer.
The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided.
The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding.
The main purpose of melt blown fabric is to provide barrier property for the liquid.
Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form.
Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric.
Characteristics of Meltblown fabrics are:
The main desired characteristics expected for melt blown nonwoven fabrics are:
Adjustable Pores And Capillary Structure
Excellent barrier properties
Filament size 1 -3 �µm
High Elasticity
High Filtration capability
Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD).
Large Area-to-weight ratio
Self-bonding
The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2.
Very good thermal insulation for apparel application
Weak tensile properties
Wicking Properties

Application of spun-bond nonwoven fabrics:
Sanitary and Hygiene:
Sanitary napkins,
Baby diapers and
Incontinence diapers
Medical and Surgical:
Gowns,
Face masks,
Caps,
Drapes, etc
Other Miscellaneous Applications:
Filtration Material,
Agriculture,
Oilsorbents
Hot-melt adhesives
Headliners, etc

About Meltblown Nonwoven
â?¢ Melt blown is a one step process to make fabrics from polymer.
â?¢ The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided.
â?¢ The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding.
â?¢ The main purpose of melt blown fabric is to provide barrier property for the liquid.
â?¢ Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form.
â?¢ Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric.
Characteristics of Meltblown fabrics are:
The main desired characteristics expected for melt blown nonwoven fabrics are:
â?¢ Adjustable Pores And Capillary Structure
â?¢ Excellent barrier properties
â?¢ Filament size 1 -3 �µm
â?¢ High Elasticity
â?¢ High Filtration capability
â?¢ Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD).
â?¢ Large Area-to-weight ratio
â?¢ Self-bonding
â?¢ The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2.
â?¢ Very good thermal insulation for apparel application
â?¢ Weak tensile properties
â?¢ Wicking Properties

Application of spun-bond nonwoven fabrics:
â?¢ Sanitary and Hygiene:
â?¢ Sanitary napkins,
â?¢ Baby diapers and
â?¢ Incontinence diapers
â?¢ Medical and Surgical:
â?¢ Gowns,
â?¢ Face masks,
â?¢ Caps,
â?¢ Drapes, etc
â?¢ Other Miscellaneous Applications:
â?¢ Filtration Material,
â?¢ Agriculture,
â?¢ Oilsorbents
â?¢ Hot-melt adhesives
â?¢ Headliners, etc

About Meltblown Nonwoven

Melt blown is a one step process to make fabrics from polymer.
The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided.
The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding.
The main purpose of melt blown fabric is to provide barrier property for the liquid.
Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form.
Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric.
Characteristics of Meltblown fabrics are:

The main desired characteristics expected for melt blown nonwoven fabrics are:

Adjustable Pores And Capillary Structure
Excellent barrier properties
Filament size 1 -3 �?�µm
High Elasticity
High Filtration capability
Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD).
Large Area-to-weight ratio
Self-bonding
The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2.
Very good thermal insulation for apparel application
Weak tensile properties
Wicking Properties


Application of spun-bond nonwoven fabrics:

Sanitary and Hygiene:
Sanitary napkins,
Baby diapers and
Incontinence diapers
Medical and Surgical:
Gowns,
Face masks,
Caps,
Drapes, etc
Other Miscellaneous Applications:
Filtration Material,
Agriculture,
Oilsorbents
Hot-melt adhesives
Headliners, etc

About Meltblown Nonwoven

Melt blown is a one step process to make fabrics from polymer.
The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided.
The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding.
The main purpose of melt blown fabric is to provide barrier property for the liquid.
Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form.
Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric.
Characteristics of Meltblown fabrics are:

The main desired characteristics expected for melt blown nonwoven fabrics are:

Adjustable Pores And Capillary Structure
Excellent barrier properties
Filament size 1 -3 �?�µm
High Elasticity
High Filtration capability
Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD).
Large Area-to-weight ratio
Self-bonding
The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2.
Very good thermal insulation for apparel application
Weak tensile properties
Wicking Properties


Application of spun-bond nonwoven fabrics:

Sanitary and Hygiene:
Sanitary napkins,
Baby diapers and
Incontinence diapers
Medical and Surgical:
Gowns,
Face masks,
Caps,
Drapes, etc
Other Miscellaneous Applications:
Filtration Material,
Agriculture,
Oilsorbents
Hot-melt adhesives
Headliners, etc

We are a trading and manufacturing company based in Germany

Product details:
1. Refillable Electronic plastic lighter .
2. With a big size :97*34*15 mm
3. Butane gas lighter . Weight of gas is about 7 g .
4.Half transparent five colors .
5. PACKAGE:
20PCS/BOX,400PCS/CARTON
OURTER CARTON SIZE:51.5*32.5*19CM
The box is customized , it can be normal color box , display box or blister package .

If you are interested in our products, kindly send us your detailed requirement to get best rate quotation.

Complex fertiliser. Contains all essential for plants nutrients in
one granule.
Suitable for all crops and all soil types. Especially efficient on the
soils with high content of mobile phosphorous, as well as for
potassium-demanding plants (potato, buckwheat).
Easy storage and application due to excellent physicochemical
properties.

Total nitrogen (N), % - 22
of which
ammoniacal N, % - 12
nitric N, % - 10
Phosphorus pentoxide (on P2O5 basis):
total P2O5 - 7
water-soluble P2O5, min, % - 3
Water-soluble potassium oxide (on K2O basis) - 12
Sulphates (on S basis), % - 2
Granulometric composition, %
under 1 mm, max - 1
2 - 5 mm, min - 90
over 6.3 mm - 0
Friability, % - 100

General specifications:
Sunflower oil is the fixed oil obtained from the seed of the sunflower plant
Helianthus annuus by mechanical expression or solvent extraction.

Test method range
Specific Gravity @ 25øC USP 0.915-0.920
Iodine Value USP 110 - 143
Saponification Value USP 188 - 194
Free Fatty Acids USP < 2.5 mL of
0.02 N NaOH

Color Gardner AOCS Td la-64 3 max
Appearance Pale yellow, bright & clear
oily liquid
Odor Bland, odorless
TYPICAL FATTY ACID COMPOSITION (%)
C14:0 <0.5 C18:2 20 - 75
C16:0 3.0 - 10 C18:3 <1.5
C16:1 <1.0 C20:0 <1.0
C18:0 1.0 - 10 C20:1 <0.5
C18:1 14 - 65

Because of natural variations in oilseed crops, chemical and physical constants cannot be guaranteed at all times.


1Liter x 12 Bottle.

Different Types of penetration and viscosity grade bitumen along with oxidized and emulsion types.

From crude oil to finished refinery product ... D2, D6, USLD, JA1-91/91, MAZUT M100 , IFO, M2T2, LCO, LNG, EN590, AGO, PETROLEUM ASPHALT, PETCOKE,NBLCO RLCO, REBCO, ESPO,

We are pleased to submit this corporate offer. And we confirm our ability and willingness to conclude a purchase and sales contract with "qualified partners", provided you accept the following conditions and quality:
Only companies or those mandate owners with proof of the purchaser are admitted and processed.
After the first data exchange by the ICPO you will receive the CI after a successful check by the refinery.

From crude oil to finished refinery product ... D2, D6, USLD, JA1-91/91, MAZUT M100 , IFO, M2T2, LCO, LNG, EN590, AGO, PETROLEUM ASPHALT, PETCOKE,NBLCO RLCO, REBCO, ESPO,
we work with Saudi Arabian Partner -
And we confirm our ability and willingness to conclude a purchase and sales contract with "qualified partners", provided you accept the following conditions and quality: Only companies or those mandate owners with proof of the purchaser are admitted and processed. After the first data exchange by the ICPO you will receive the CI after a successful check by the refinery.

We, ready to sell the
PRICE(specified with delivery to FOB Rotterdam or CIF specified by the buyer)
LNG (minus discount $20 Rotterdam Platts)
LPG (minus discount $20 Rotterdam Platts)
DIESEL D2 (minus discount $20 Rotterdam Platts)
DIESEL D6 (minus discount $20 Rotterdam Platts)
EN 590 (minus discount $20 Rotterdam Platts)
JET A1 (minus discount $10 Rotterdam Platts)
TERMS OF PAYMENT:
SBLC, PERFORMANCE BOND 2%. Payment for the each ship lot of the Goods will be made by MT 103.
INSPECTION:
SGS Inspection