Find Verified Nickel Rods Suppliers, Manufacturers and Wholesalers

Standard
ASTM B160 / ASME SB160


Dimensions
ASTM, ASME and API


Round Bars Size
10 mm To 100 mm Dia in 100 mm TO 6000 mm Length.


Round bar Diameter
3-~800mm


Hex Bar size
2-100mm A/F


Square bar size
4 to 100mm


Flat bar Thickness
2 -100mm


Flat bar Width
10 to 500mm


Length
3 to 6 meter, Custom Cut Lengths


Form
Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wiremesh, Billet, Ingot, Forging Etc.,

We put forward a high quality of assortment of Nickel which is available
in many forms including LME registered and non registered cathodes,
cut cathodes, briquettes, pellets, disks, shots, granules, foil, powder,
flakes, sheet, wire, mesh, spheres, “evaporation slugs”, and rods.
Nickel is a silvery white metal that takes on a high polish. It is hard, malleable, ductile,
somewhat ferromagnetic, and a fair conductor of heat and electricity

Refined nickel metal (99.8%99.9% Ni, LME / ASTM B39) for batteries, alloys, and stainless steel.
Offers superior corrosion resistance (Industrial-Grade Refining).

Range: 3.17 MM TO 350 MM DIA
Round BarsNickel Alloy
ASTM / ASME SB 160 UNS 2200 ( NICKEL 200 ) / UNS 2201 (NICKEL 201 )
ASTM / ASME SB 164 UNS 4400 (MONEL 400 )
ASTM / ASME SB 425 UNS 8825 (INCONEL 825) ASTM / ASME SB 166 UNS 6600 (INCONEL 600 ) / UNS 6601 ( INCONEL 601 )
ASTM / ASME SB 446UNS 6625 (INCONEL 625)
ASTM / ASME SB 574 UNS 10276 ( HASTELLOY C 276 )
ASTM / ASME SB 472 UNS 8020 ( ALLOY 20 / 20 CB 3 )

We cater to various industries with our qualitative bas,rod and wires with various types that are in huge demand in the market. We are well reckoned as one of the dominant Stainless steel,Duplex Steel,Carbon Steel,Alloy Steel,Nickel Alloy bars, rods and wires Exporters and Suppliers based in India. To match the various needs of the clients, our Bars & Rods and Wires are available in various metals, sizes and grades.

High-performance nickel-cobalt alloy with adjustable cobalt content (10%-60%), featuring excellent high-temperature creep resistance, corrosion resistance, and mechanical strength. Widely used in aerospace engines, new energy battery electrodes, medical implants, and marine deep-sea equipment. Complies with ASTM B163, AMS 5666, and ISO 5832 standards, exported to 30+ countries (Europe, North America, Japan, South Korea) with 15+ years of Ni-Co alloy R&D and export experience.

Our high-purity Nickel and Nickel-Based Alloys (including grades Ni9999, Ni9996, Ni9990, Ni9950, and Ni9920) offer excellent plasticity, superior corrosion resistance, and specific magnetic properties. These materials are widely used in the manufacturing of aircraft, radar systems, civil machinery, electroplating, and battery industries. Our nickel-based alloys feature high heat resistance and excellent welding performance, making them the ideal choice for continuous high-temperature applications. To ensure safe global delivery, we use standard export seaworthy packing, which includes anti-rust board, inner and outer steel rings, vertical and horizontal steel bands, and a protective VCI vinyl wrap. Customized packaging is available upon request.

Nickel-Cobalt Alloy Strip
High permeability, stable magnetic properties, and low thermal expansion coefficient.
Excellent ductility, welding performance and fatigue resistance.
Widely used for sensors, transformers, relays, electronic components and aerospace parts.
Standard seaworthy export packing: moisture-proof paper, steel guards, steel straps and wooden pallets.

Size : 5,5 mm-25 mm production range
Weight min. 2050 max 2400 kg
Outside diameter 1250 mm
Internal diameter 850 mm
Height 1700-2200 mm

Product Name

Carbon Steel Wire Rods

Material

Q195, Q235, Q345; ASTM A53 GrA,GrB; STKM11,ST37,ST52, 16Mn,etc.

Diameter

0.1MM~12MM

Length

in coils
5m-14m,5.8m,6m,10m-12m,12m or as customer's actual reques

Standard

JIS G3466, EN 10219, GB/T 3094-2000, GB/T 6728-2002

Section Shape

Round

Technique

Hot rolled

Packing

Bundle, or with all kinds of colors PVC or as your requirements



Surface Treatment

1. Galvanized
2. Transparent oil,anti-rust oil
3. According to clients requirement

Ends

Plain end

MOQ

1 Tons, more quantity price will be lower



Product Application

1. Fence, greenhouse, door pipe,greenhouse
2. Low pressure liquid, water, gas, oil, line pipe
3. For both indoor and outdoor the building construction
4. Widely used in scaffolding construction which is much cheaper and convenient



Wire rods are mainly used as blanks for wire drawing, and can also be directly used as building materials and processed into mechanical parts.

Wire rod, also known as wire rod, usually refers to small diameter round steel in coils. The diameter of the wire rod is in the range of 5-19 mm (usually 6-9 mm), and its lower limit is the minimum size of the hot rolled steel section.
Wire rods are round steel with relatively small diameter. The commodity form is supplied in coils. On the construction site, the common ones are those with diameters of 6, 8, 10 and 12 mm, most of which are low carbon steel. Generally, they are not used for the main reinforcement of reinforced concrete structures, but are mainly used for making reinforcement sleeves. There are also small diameter "brick reinforcement" used in brick concrete structures.

Warehouse Storage

Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project

Packing and shipping

Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service.
During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period

Product Name : Carbon Steel Wire Rods

Material : Q195, Q235, Q345; ASTM A53 GrA,GrB; STKM11,ST37,ST52, 16Mn,etc.

Wall Thickness : 0.1MM~12MM

Length : in coils
5m-14m,5.8m,6m,10m-12m,12m or as customer's actual reques

Standard : JIS G3466, EN 10219, GB/T 3094-2000, GB/T 6728-2002

Section Shape : Round

Technique : Hot rolled

Packing : Bundle, or with all kinds of colors PVC or as your requirements

Surface Treatment

1. Galvanized

2. PVC,Black and color painting

3. Transparent oil,anti-rust oil

4. According to clients requirement

Ends : Plain end

MOQ : 1 Tons, more quantity price will be lower

Product Application

1. Fence, greenhouse, door pipe,greenhouse

2. Low pressure liquid, water, gas, oil, line pipe

3. For both indoor and outdoor the building construction
4. Widely used in scaffolding construction which is much cheaper and
convenient

* Wire rods are mainly used as blanks for wire drawing, and can also be directly used as building materials and processed into mechanical parts.

* Wire rod, also known as wire rod, usually refers to small diameter round steel in coils. The diameter of the wire rod is in the range of 5-19 mm (usually 6-9 mm), and its lower limit is the minimum size of the hot rolled steel section.

* Wire rods are round steel with relatively small diameter. The commodity form is supplied in coils. On the construction site, the common ones are those with diameters of 6, 8, 10 and 12 mm, most of which are low carbon steel. Generally, they are not used for the main reinforcement of reinforced concrete structures, but are mainly used for making reinforcement sleeves. There are also small diameter "brick reinforcement" used in brick concrete structures.

Warehouse Storage

* Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project

Packing and shipping

* Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service.

* During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period

Nickel Sheets & Cathodes High-Purity Nickel for Industrial Applications

Our nickel sheets and cathodes are refined nickel products produced to high purity standards, typically meeting or exceeding 99.8% nickel content. These materials are essential in a wide range of industries due to their excellent corrosion resistance, heat stability, and strong mechanical properties.

Nickel cathodes are primarily used as raw material in stainless steel, alloy, and battery production, while nickel sheets are widely used in fabrication, plating, and chemical processing equipment. Their consistent quality ensures efficient melting, forming, and industrial performance.

Key Features:

High-purity nickel (â?¥ 99.8% Ni content)
Available in cathodes (for remelting) and sheets (for fabrication)
Excellent resistance to corrosion, oxidation, and high temperatures
Uniform chemical composition for reliable industrial use
Suitable for stainless steel, superalloys, and battery manufacturing
Ideal for chemical processing, marine, and aerospace applications
Smooth surface finish for easy handling and processing
Available in various sizes, thicknesses, and forms
Supplied in bulk for wholesale and export supply
Manufactured to meet international quality standards

Product Name

Carbon Steel Wire Rods

Material

Q195, Q235, Q345; ASTM A53 GrA,GrB; STKM11,ST37,ST52, 16Mn,etc.

Diameter

0.1MM~12MM

Length

in coils
5m-14m,5.8m,6m,10m-12m,12m or as customer's actual reques

Standard

JIS G3466, EN 10219, GB/T 3094-2000, GB/T 6728-2002

Section Shape

Round

Technique

Hot rolled

Packing

Bundle, or with all kinds of colors PVC or as your requirements



Surface Treatment

1. Galvanized
2. Transparent oil,anti-rust oil
3. According to clients requirement

Ends

Plain end

MOQ

1 Tons, more quantity price will be lower



Product Application

1. Fence, greenhouse, door pipe,greenhouse
2. Low pressure liquid, water, gas, oil, line pipe
3. For both indoor and outdoor the building construction
4. Widely used in scaffolding construction which is much cheaper and convenient



Wire rods are mainly used as blanks for wire drawing, and can also be directly used as building materials and processed into mechanical parts.

Wire rod, also known as wire rod, usually refers to small diameter round steel in coils. The diameter of the wire rod is in the range of 5-19 mm (usually 6-9 mm), and its lower limit is the minimum size of the hot rolled steel section.
Wire rods are round steel with relatively small diameter. The commodity form is supplied in coils. On the construction site, the common ones are those with diameters of 6, 8, 10 and 12 mm, most of which are low carbon steel. Generally, they are not used for the main reinforcement of reinforced concrete structures, but are mainly used for making reinforcement sleeves. There are also small diameter "brick reinforcement" used in brick concrete structures.

Product Name

Straight Wire Rod

Material

Q195, Q235, Q345; ASTM A53 GrA,GrB; STKM11,ST37,ST52, 16Mn,etc.

Diameter

0.1MM~18MM

Length

5m-14m,5.8m,6m,10m-12m,12m or as customer's actual reques

Standard

JIS G3466, EN 10219, GB/T 3094-2000, GB/T 6728-2002

Section Shape

Round

Technique

Hot rolled

Packing

Bundle, or with all kinds of colors PVC or as your requirements



Surface Treatment

1. Galvanized
2. Transparent oil,anti-rust oil
3. According to clients requirement

Ends

Plain end

MOQ

1 Tons, more quantity price will be lower



Product Application

1. Fence, greenhouse, door pipe,greenhouse
2. Low pressure liquid, water, gas, oil, line pipe
3. For both indoor and outdoor the building construction
4. Widely used in scaffolding construction which is much cheaper and convenient



Wire rods are mainly used as blanks for wire drawing, and can also be directly used as building materials and processed into mechanical parts.

Wire rod, also known as wire rod, usually refers to small diameter round steel in coils. The diameter of the wire rod is in the range of 5-19 mm (usually 6-9 mm), and its lower limit is the minimum size of the hot rolled steel section.
Wire rods are round steel with relatively small diameter. The commodity form is supplied in coils. On the construction site, the common ones are those with diameters of 6, 8, 10 and 12 mm, most of which are low carbon steel. Generally, they are not used for the main reinforcement of reinforced concrete structures, but are mainly used for making reinforcement sleeves. There are also small diameter "brick reinforcement" used in brick concrete structures.

Product Name

Carbon Steel Wire Rods

Material

Q195, Q235, Q345; ASTM A53 GrA,GrB; STKM11,ST37,ST52, 16Mn,etc.

Diameter

0.1MM~12MM

Length

in coils
5m-14m,5.8m,6m,10m-12m,12m or as customer's actual reques

Standard

JIS G3466, EN 10219, GB/T 3094-2000, GB/T 6728-2002

Section Shape

Round

Technique

Hot rolled

Packing

Bundle, or with all kinds of colors PVC or as your requirements



Surface Treatment

1. Galvanized
2. Transparent oil,anti-rust oil
3. According to clients requirement

Ends

Plain end

MOQ

1 Tons, more quantity price will be lower



Product Application

1. Fence, greenhouse, door pipe,greenhouse
2. Low pressure liquid, water, gas, oil, line pipe
3. For both indoor and outdoor the building construction
4. Widely used in scaffolding construction which is much cheaper and convenient



Wire rods are mainly used as blanks for wire drawing, and can also be directly used as building materials and processed into mechanical parts.

Wire rod, also known as wire rod, usually refers to small diameter round steel in coils. The diameter of the wire rod is in the range of 5-19 mm (usually 6-9 mm), and its lower limit is the minimum size of the hot rolled steel section.
Wire rods are round steel with relatively small diameter. The commodity form is supplied in coils. On the construction site, the common ones are those with diameters of 6, 8, 10 and 12 mm, most of which are low carbon steel. Generally, they are not used for the main reinforcement of reinforced concrete structures, but are mainly used for making reinforcement sleeves. There are also small diameter "brick reinforcement" used in brick concrete structures.

Product Name

Carbon Steel Wire Rods

Material

Q195, Q235, Q345; ASTM A53 GrA,GrB; STKM11,ST37,ST52, 16Mn,etc.

Diameter

0.1MM~12MM

Length

in coils
5m-14m,5.8m,6m,10m-12m,12m or as customer's actual reques

Standard

JIS G3466, EN 10219, GB/T 3094-2000, GB/T 6728-2002

Section Shape

Round

Technique

Hot rolled

Packing

Bundle, or with all kinds of colors PVC or as your requirements



Surface Treatment

1. Galvanized
2. Transparent oil,anti-rust oil
3. According to clients requirement

Ends

Plain end

MOQ

1 Tons, more quantity price will be lower



Product Application

1. Fence, greenhouse, door pipe,greenhouse
2. Low pressure liquid, water, gas, oil, line pipe
3. For both indoor and outdoor the building construction
4. Widely used in scaffolding construction which is much cheaper and convenient



Wire rods are mainly used as blanks for wire drawing, and can also be directly used as building materials and processed into mechanical parts.

Wire rod, also known as wire rod, usually refers to small diameter round steel in coils. The diameter of the wire rod is in the range of 5-19 mm (usually 6-9 mm), and its lower limit is the minimum size of the hot rolled steel section.
Wire rods are round steel with relatively small diameter. The commodity form is supplied in coils. On the construction site, the common ones are those with diameters of 6, 8, 10 and 12 mm, most of which are low carbon steel. Generally, they are not used for the main reinforcement of reinforced concrete structures, but are mainly used for making reinforcement sleeves. There are also small diameter "brick reinforcement" used in brick concrete structures.

Product Name

Carbon Steel Wire Rods

Material

Q195, Q235, Q345; ASTM A53 GrA,GrB; STKM11,ST37,ST52, 16Mn,etc.

Diameter

0.1MM~12MM

Length

in coils
5m-14m,5.8m,6m,10m-12m,12m or as customer's actual reques

Standard

JIS G3466, EN 10219, GB/T 3094-2000, GB/T 6728-2002

Section Shape

Round

Technique

Hot rolled

Packing

Bundle, or with all kinds of colors PVC or as your requirements



Surface Treatment

1. Galvanized
2. Transparent oil,anti-rust oil
3. According to clients requirement

Ends

Plain end

MOQ

1 Tons, more quantity price will be lower



Product Application

1. Fence, greenhouse, door pipe,greenhouse
2. Low pressure liquid, water, gas, oil, line pipe
3. For both indoor and outdoor the building construction
4. Widely used in scaffolding construction which is much cheaper and convenient



.

1060 Aluminum rod is a kind of nonferrous metal rod refers to the use of pure aluminum or aluminum alloy by kneading processing into the longitudinal length of hollow metal rod data May have one or more closed through holes wall thickness uniform cross section in line shape or roll shape delivery

Parameter

Product Name

1060 Aluminum rod
Price range

350900 Preferential prices are available for large orders

Minimum order quantity

1 ton

Specifications

The thickness is 2mm200mm the width is 5mm150 and the length is 3m12m or according to requirements

Standard

ASTM JIS DIN GB

Steel Grade

1050106011002A16LY162A02LY6

Test

Chemical Component Analysis Mechanical Properties Technical Properties Exterior Size Inspection Xray Test

Product

certification

ISOSGSBVTUV

Delivery Condition

Forged Rough Machined Black Surface

Application scenario

Application scenarioResidential ConstructionMining Infrastructure

Processing Service

Welding Drilling Cutting Bending

Packing

Wooden pallet or according to customers request

Lead time

7 to 15 working days

Payment terms

TT LC

Exporting country

Southeast Asia Thailand Malaysia Brunei

Europe Finland Sweden Ireland Netherlands

Warehouse Storage

Shandong Jintuo Metal Materials Co Ltd is located in Liaocheng City the capital of steel tubes It is a large enterprise specializing in the sales of carbon steel stainless steel galvanized color coated products and copper and aluminumOur company adopts a flexible business approach and management mechanism to provide good services to customers while also considering the interests of the owner and the project in order to ensure the quality of the project

* JIS Aluminum rod is a kind of non-ferrous metal rod, refers to the use of pure aluminum or aluminum alloy by kneading processing into the longitudinal length of hollow metal rod data. May have one or more closed through holes, wall thickness, uniform cross section, in line shape or roll shape delivery.

Product Name : JIS Aluminum rod

Price range : $350-$900 Preferential prices are available for large orders

Minimum order quantity : 1 ton

Specifications : The thickness is 2mm-200mm, the width is 5mm-150, and the length is 3m-12m or according to requirements

Standard : ASTM, JIS, DIN, GB,

Steel Grade : 1050106011002A16LY162A02LY6

Test : Chemical Component Analysis, Mechanical Properties, Technical Properties, Exterior Size Inspection, , X-ray Test.

certification : ISO,SGS,BV,TUV,

Delivery Condition : Forged +Rough Machined (Black Surface)

Application scenario : Application scenario,Residential Construction,Mining Infrastructure

Processing Service : Welding, Drilling, Cutting, Bendingï¼?

Packing : Wooden pallet or according to customer's request

Lead time : 7 to 15 working days

Payment terms : T/T ,LC

Exporting country : Southeast Asia: Thailand, Malaysia, Brunei

Europe: Finland, Sweden, Ireland, Netherlands

Warehouse Storage : Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project

* Aluminum rod is a kind of non-ferrous metal rod, refers to the use of pure aluminum or aluminum alloy by kneading processing into the longitudinal length of hollow metal rod data. May have one or more closed through holes, wall thickness, uniform cross section, in line shape or roll shape delivery.

Product Name : Aluminum rod

Price range : $350-$900 Preferential prices are available for large orders

Minimum order quantity : 1 ton

Specifications :
The thickness is 2mm-200mm, the width is 5mm-150, and the length is 3m-12m or according to requirements

Standard : ASTM, JIS, DIN, GB,

Steel Grade : 1050106011002A16LY162A02LY6

Test : chemical Component Analysis, Mechanical Properties, Technical Properties, Exterior Size Inspection, , X-ray Test.

certification : ISO,SGS,BV,TUV,

Delivery Condition : Forged +Rough Machined (Black Surface)

Application scenario : Application scenario,Residential Construction,Mining Infrastructure

Processing Service : Welding, Drilling, Cutting, Bending

Packing : Wooden pallet or according to customer's request

Lead time : 7 to 15 working days

Payment terms : T/T ,LC

Exporting country : Southeast Asia: Thailand, Malaysia, Brunei

Europe: Finland, Sweden, Ireland, Netherlands

Warehouse Storage : Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project

Packing and shipping :
Products are widely used in precision instruments, aviation, ships, automobiles, home appliances, construction, Bridges, boilers, highway guardrail and other industries. Annual sales of more than 6 million tons. Products are exported to more than 80 countries and regions. We have won the recognition of customers with good reputation and good service

6061 T4 round aluminum bar is are magnesium and silicon which has moderate strength good corrosion resistance weldability and good oxidation effect In particular there is no stress corrosion cracking tendency its excellent weldability corrosion resistance and cold workability are good and it is a wide range of use A very promising alloy Can be anodized coloring can also be painted on enamel suitable for building decoration materials It contains a small amount of Cu so the strength is higher than 6063 but the quenching sensitivity is also higher than 6063 after extrusion can not achieve wind quenching need to resolution treatment and quenching aging in order to obtain higher strength 6061 aluminum alloy contains 0408 silicon 07 iron 01504 copper 015 manganese 0812 magnesium 004035 chromium 025 zinc 015 titanium and a residual amount of aluminum The tensile strength of 6061 aluminum alloy is 180Mpa yield strength is 110Mpa elongation is 14 widely used in the manufacture of trucks building ships trams furniture mechanical parts precision machining industrial materials and other fields

Data presentation
Product name

Aluminium bar
Alloy

10501060107011002A062A123003300431054A01

5A0650525056508357545A0660616063620170057075

Temper

H111H112H12H16H18H24H32H14T3T4T5T6T8
Diameter

10mm400mm
Length

1000mm12000mm or customized
Type

OEMODM

Processing Service

Cutting surface treatment rough bending hardening surface painting forming etc

Standard

ASTMAISIJISGB DINEN
Certificates

ISO SGSBV
MOQ

1 TON

Delivery time

Future Goods 1020 days Ready stock 510days
Packaging

Seaworthy Wooden pallet Wooden caseAluminum case
Application

Transportation construction machinery and equipment decoration industrialization etc
Payment Terms

TT LC etc

Warehouse storage
In order to meet the needs of customers small batch multispecification to spot the minimum order quantity of a single specification is 1 ton we have been committed to 18 series aluminum sheet aluminum sheet aluminum coil aluminum foil aluminum tube and other aluminum products R D production and sales Annual inventory of more than 3000 tons complete brand specifications truly meet customers onestop procurement

We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.

Nickel Wire

NP1
*Purity*: 99.9799 - 99.9839

*Diameter*: 0.025 mm

*Origin*: Czech Republic

*Current Location*: Dubai

*Storage Location*: Etihad Secure Logistics

*Quantity*: 38.2 million meters, packed in 18 secure boxes

*Monthly Production*:

60 million meters

*Price*: Depends on quantity

*Minimum Order Quantity*: 5 million meters. 2: Transaction Process: Steps

1. Letter of Intent (LOI) on company letterhead

2. We will reply with a Formal Order of Contribution (FCO) containing all documents

3. Buyer submits Internal Request for Quotation (ICPO), and we will arrange inspection

4. We submit a commercial invoice

5. Buyer pays the purchase price; ownership transfers to the buyer upon receipt of payment.

6. Once the transfer of ownership is complete, the buyer authorizes us to ship the nickel wire to the new owner, as ownership of SKR now belongs to them. We will arrange shipment to the nearest airport. 3. Price: The minimum order quantity is 5 million meters, and the price is US$22.5 meter; this is the CIF price.

High Nickel Alloy Feed Pipes are high-performance piping components designed for demanding applications involving elevated temperatures, high pressures, and corrosive operating environments. Manufactured from nickel-rich alloys, these feed pipes offer excellent mechanical strength, oxidation resistance, corrosion resistance, and resistance to pitting, crevice corrosion, and chloride stress corrosion cracking.

Stainless Steel Impex manufactures, supplies, exports, and stocks High Nickel Alloy Feed Pipes in different grades, dimensions, wall thicknesses, and configurations according to customer requirements and applicable standards. These pipes are suitable for reactors, vessels, condensers, heat-transfer systems, petrochemical equipment, and other industrial applications where reliable performance is essential.

The pipes can be supplied in air feed and column feed configurations and are available in hot-rolled and other manufacturing conditions. They offer good weldability, toughness, durability, and workability, making them suitable for demanding industrial environments. Quality inspection and testing are carried out to ensure dimensional accuracy, material integrity, and dependable service performance.

High Nickel Alloy Feed Pipes Types

â?¢ High Nickel Alloy Air Feed Pipe
â?¢ High Nickel Alloy Column Feed Pipe

Specifications: ASTM A106 / ASME SA106

Outer Diameters: Ranging from 31.8 mm to 711 mm

Wall Thicknesses: From 2.3 mm to 100 mm

High-purity Ni201: Purity >99.95% -99,99% with an extremely low carbon content to ensure superior performance.
Corrosion resistance: Excellent resistance to alkaline solutions, chlorine, and high-temperature environments.
Wide range of applications: Suitable for use in the aerospace, electronics, medical, and chemical industries, as well as in vacuum equipment.
Custom orders: OEM/ODM services available, including product development and design.
Fast delivery: Products can be shipped within one week of payment.

Diameter 5.5MM-50.0MM
Coil Weight - 2 tons around
SPEC - SC/SCR/SCM/HIGH CARBON

Copper Rods are high-quality metal products manufactured from refined copper for electrical, industrial, and manufacturing applications. Known for their excellent electrical conductivity, thermal conductivity, corrosion resistance, and mechanical strength, copper rods are widely used in the production of electrical wires, cables, busbars, transformers, and other copper components. They are available in different diameters, grades, and surface finishes to meet specific industrial requirements. Copper rods can be supplied in straight lengths or coils, depending on the application. Their reliable performance and excellent workability make them a preferred raw material for electrical manufacturers, construction companies, and metal processing industries.

Key Specifications
Product Type: Copper Rods
Material: Refined Copper
Copper Purity: 99.90% - 99.99%, depending on grade
Common Grade: C11000 / Electrolytic Tough Pitch Copper
Diameter: Available in various sizes
Form: Straight lengths or coils
Surface: Smooth and clean
Electrical Conductivity: High
Customization: Diameter, length, and packaging options available

Product Name

Carbon Steel Wire Rods

Material

Q195, Q235, Q345; ASTM A53 GrA,GrB; STKM11,ST37,ST52, 16Mn,etc.

Diameter

0.1MM~12MM

Length

in coils
5m-14m,5.8m,6m,10m-12m,12m or as customer's actual reques

Standard

JIS G3466, EN 10219, GB/T 3094-2000, GB/T 6728-2002

Section Shape

Round

Technique

Hot rolled

Packing

Bundle, or with all kinds of colors PVC or as your requirements



Surface Treatment

1. Galvanized
2. Transparent oil,anti-rust oil
3. According to clients requirement

Ends

Plain end

MOQ

1 Tons, more quantity price will be lower



Product Application

1. Fence, greenhouse, door pipe,greenhouse
2. Low pressure liquid, water, gas, oil, line pipe
3. For both indoor and outdoor the building construction
4. Widely used in scaffolding construction which is much cheaper and convenient



Wire rods are mainly used as blanks for wire drawing, and can also be directly used as building materials and processed into mechanical parts.

Wire rod, also known as wire rod, usually refers to small diameter round steel in coils. The diameter of the wire rod is in the range of 5-19 mm (usually 6-9 mm), and its lower limit is the minimum size of the hot rolled steel section.
Wire rods are round steel with relatively small diameter. The commodity form is supplied in coils. On the construction site, the common ones are those with diameters of 6, 8, 10 and 12 mm, most of which are low carbon steel. Generally, they are not used for the main reinforcement of reinforced concrete structures, but are mainly used for making reinforcement sleeves. There are also small diameter "brick reinforcement" used in brick concrete structures.

Warehouse Storage

Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project

Packing and shipping

Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service.
During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period

Product Name

Carbon Steel Wire Rods

Material

Q195, Q235, Q345; ASTM A53 GrA,GrB; STKM11,ST37,ST52, 16Mn,etc.

Diameter

0.1MM~12MM

Length

in coils
5m-14m,5.8m,6m,10m-12m,12m or as customer's actual reques

Standard

JIS G3466, EN 10219, GB/T 3094-2000, GB/T 6728-2002

Section Shape

Round

Technique

Hot rolled

Packing

Bundle, or with all kinds of colors PVC or as your requirements



Surface Treatment

1. Galvanized
2. Transparent oil,anti-rust oil
3. According to clients requirement

Ends

Plain end

MOQ

1 Tons, more quantity price will be lower



Product Application

1. Fence, greenhouse, door pipe,greenhouse
2. Low pressure liquid, water, gas, oil, line pipe
3. For both indoor and outdoor the building construction
4. Widely used in scaffolding construction which is much cheaper and convenient



Wire rods are mainly used as blanks for wire drawing, and can also be directly used as building materials and processed into mechanical parts.

Wire rod, also known as wire rod, usually refers to small diameter round steel in coils. The diameter of the wire rod is in the range of 5-19 mm (usually 6-9 mm), and its lower limit is the minimum size of the hot rolled steel section.
Wire rods are round steel with relatively small diameter. The commodity form is supplied in coils. On the construction site, the common ones are those with diameters of 6, 8, 10 and 12 mm, most of which are low carbon steel. Generally, they are not used for the main reinforcement of reinforced concrete structures, but are mainly used for making reinforcement sleeves. There are also small diameter "brick reinforcement" used in brick concrete structures.

Warehouse Storage

Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.

2A16 LY16 Aluminum rod is a kind of non-ferrous metal rod, refers to the use of pure aluminum or aluminum alloy by kneading processing into the longitudinal length of hollow metal rod data. May have one or more closed through holes, wall thickness, uniform cross section, in line shape or roll shape delivery.

Parameter

Product Name

2A16 LY16 Aluminum rod

Price range

$350-$900 Preferential prices are available for large orders

Minimum order quantity

1 ton

Specifications

The thickness is 2mm-200mm, the width is 5mm-150, and the length is 3m-12m or according to requirements

Standard

ASTM, JIS, DIN, GB,

Steel Grade

1050 1060 1100 2A16LY16 2A02 LY6

Test

Chemical Component Analysis, Mechanical Properties, Technical Properties, Exterior Size Inspection, , X-ray Test.

Product

certification

ISO,SGS,BV,TUV,

Delivery Condition

Forged +Rough Machined (Black Surface)

Application scenario

Application scenario,Residential Construction,Mining Infrastructure

Processing Service

Welding, Drilling, Cutting, Bending

Packing

Wooden pallet or according to customer's request

Lead time

7 to 15 working days

Payment terms

T/T ,LC

Exporting country

Southeast Asia: Thailand, Malaysia, Brunei

Europe: Finland, Sweden, Ireland, Netherlands

Warehouse Storage

Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.

We supply premium quality Pure Molybdenum and Strengthened Molybdenum Rods designed for high-temperature and demanding industrial applications. Molybdenum features an exceptionally high melting point of 2620�?�°C, low thermal expansion, high thermal conductivity, and excellent resistance to deformation. It demonstrates outstanding corrosion resistance against numerous acids, molten metals, and molten glass, and is relatively inert in hydrogen, ammonia, and nitrogen up to about 1100�?�°C. By adding other metals to form molybdenum alloys, these properties are significantly enhanced. According to your specific application environment and operating temperature, we can provide the most suitable pure molybdenum or molybdenum alloy products to meet your exact requirements.

Our Threaded Rods are manufactured from premium-quality materials to provide exceptional strength, durability, and corrosion resistance for demanding industrial applications. Designed in accordance with ASTM, ASME, DIN, and other international standards, these rods ensure secure fastening and reliable performance across various industries. Available in fully threaded, partially threaded, double-end, tap-end, fine pitch, metric, Acme, trapezoidal, and heavy threaded configurations, they are suitable for construction, petrochemical, oil & gas, marine, power generation, and engineering applications. Each threaded rod undergoes strict quality inspection to guarantee dimensional accuracy, superior finish, and long service life.

Specifications: ASTM A193 / A479, ASME SA193 / A479

Specification: DIN, ASTM, BS and all International Standards

Length: 3 mm to 200 mm

Threaded Rods Size: M6 to M52 & 1/4\" to 2\"

Form: Fully Threaded Rod, Partially Threaded Rod, Tap End Threaded Rod, Double End Threaded Rod, Fine Pitch Threaded Rod, Metric Threaded Rod, all-thread Rod, Heavy Threaded Rod, Acme Threaded Rod, Trapezoidal Threaded Rod, Coil Rod, Threaded Bar.

Nickel Wire diameter 0.025 mm
Description: Nickel Wire is a cold-formed, round, normal manufacturing accuracy, in a solid state metal thread, with a diameter of 0.025 mm, supplied on a reel.
Packaging: The Nickel Wire we offer is supplied on spools in transparent containers with net weight of 136 grams. The packaging ensures the safety of the wire during storage and transportation.
1 kg of wire with a diameter of 0.025 mm contains - 227272 linear meters.
Quality Grade:
Purity grade 1: Ni at least 99.9% - 99.98%
HS code: 7505210000
Certification:
Chemical composition of Nickel Wire is certified by the IGAS RESEARCH laboratory, Germany. The chemical purity is measured with Inductively Coupled Plasma Optical Emission spectroscopy.
QUANTITY: 1.0 kg â?? 20.0 kg
MOQ: 1.0 kg.
Price: upon request.
Delivery: FOT Germany or Hungary. Air freight is available. We offer flexible shipping options to meet your specific needs.
Payment: bank transfer in advance against the invoice

The cost of the goods is directly affected by the purchase volume. Please contact us to get the best prices depending on the quantity requested.
Please provide us a Letter of Intent (LOI) mentioning the quantity of the product and target price, Proof of Funds (POF) in form of a Bank Comfort Letter (BCL).

Nickel is a hard, ductile and ferromagnetic metal that is highly polished and resistant to corrosion. Nickel is a ferrophilic element. The core is mainly composed of iron and nickel elements. In the crust, iron-mafic rocks contain more nickel than silico-alumina rocks. For example, peridotite contains 1,000 times more nickel than granite, and gabbro contains 80 times more nickel than granite.
On October 27, 2017, the World Health Organization's International Agency for Research on Cancer released the preliminary list of carcinogens for reference. Nickel compounds are in the list of carcinogens, metal cobalt, metal nickel and 66-67% nickel, 13-16% nickel. Chromium and 7% iron alloy powders for implantation of foreign bodies in vivo, nickel metal and nickel alloys are on the list of Class 2B carcinogens.
Niclkel powder is mainly used in atomic energy industry, conductive materials, battery electrode materials, chemical catalysts, hard surface spray welding, special welding rods, porous filter materials, magnetic materials, contact materials,
Diamond tools, automobile manufacturing, cemented carbide, high-temperature high-strength alloys and other powder metallurgy fields.

Copper Wire & Rods High-Conductivity Copper for Electrical & Industrial Use

Our copper wire and rods are premium-quality copper products manufactured from high-purity copper, typically meeting industry standards for electrical conductivity and mechanical performance. Designed for a wide range of applications, they offer excellent conductivity, flexibility, and durability.

Copper rods are commonly used as the base material for drawing wires and cables, while copper wires are used directly in electrical systems, power transmission, and industrial applications. These products are essential in construction, electronics, telecommunications, and manufacturing industries.

Key Features:

High-purity copper with excellent electrical conductivity
Available as copper rods (for wire drawing) and finished wires
Smooth surface finish with consistent diameter and quality
Excellent ductility, flexibility, and corrosion resistance
Suitable for electrical wiring, cables, and industrial applications
Widely used in power transmission, electronics, and construction
Manufactured to international standards (ASTM, IEC, etc.)
Available in various diameters, lengths, and coil forms
Supplied in coils, spools, or straight lengths depending on specification
Ideal for both industrial processing and direct application

**Title:** Nickel Alloy Scrap for Sale

High Grade Industrial Metal Scrap

**Description:**
We supply high-quality Nickel Alloy Scrap sourced from industrial and manufacturing residues. The material is carefully sorted and graded to ensure consistent composition, making it suitable for recycling and metal recovery processes.

**Product Details:**

* Product: Nickel Alloy Scrap
* Type: Inconel / Monel / Stainless Nickel Alloys (as available)
* Form: Sheets / Turnings / Offcuts / Solid Scrap
* Quality: Industrial grade / Recyclable material
* Origin: Available on request

**Applications:**

* Metal recycling and refining
* Stainless steel production
* Alloy manufacturing
* Industrial remelting processes

**Key Features:**
High nickel content material
Sorted and quality-checked scrap
Suitable for smelting and recovery
Consistent industrial supply

**Packaging:** Bundled / Drums / Loose bulk loading
**Minimum Order Quantity (MOQ):** Negotiable (bulk supply available)
**Price:** Competitive- Contact for quotation

**Contact:**
Serious buyers and direct scrap processors only. Message us for analysis reports, photos, and pricing details.

Nickel Scrap High-Grade Alloy Metal for Industrial Recycling

Our nickel scrap consists of high-quality nickel-bearing materials sourced from industrial components, alloys, plating residues, batteries, and manufacturing waste. Known for its strength, corrosion resistance, and heat resistance, nickel is widely used in stainless steel production, superalloys, and specialized industrial applications.

The scrap is carefully sorted and processed to ensure minimal contamination and consistent composition. Nickel scrap is commonly used in smelting and refining processes to produce new nickel alloys and stainless steel products, making it a valuable raw material for the metallurgical industry.

Key Features:

High-quality nickel-containing scrap
Sourced from industrial alloys, plating, and manufacturing waste
Cleaned and sorted to reduce impurities and non-metal contaminants
Excellent corrosion and heat resistance properties
Suitable for remelting and alloy production
Widely used in stainless steel and superalloy manufacturing
Consistent material for efficient recycling and processing
Available in bulk for wholesale and export supply
Carefully handled to maintain composition and material value

We are a leading manufacturer and exporter of premium-quality Brass Threaded Studs, engineered for high mechanical strength, precision engagement, and outstanding corrosion resistance in demanding assemblies

* Sizes: M8, M10, M12 and M16
* Material: Mild steel / carbon steel
* Grade: As per agreed buyer specification
* Length: Standard and customized lengths, subject to availability
* Thread: Metric thread
* Finish: Plain / self-colour; other finishes subject to availability
* Packaging: Export-suitable bundles or customized packing
* Supply: Bulk orders and export enquiries welcome

Dimensions, mechanical properties, applicable standards, inspection documents and delivery schedules will be confirmed against the purchase order.

Services Forging Machining Finishing Destructive Testing Heat Treating Non Destructive Testing
Materials Stainless Steel Duplex Stainless Steel Nickel Based Alloys Copper Alloy Alloy Steel Aluminum and Titanium
Industries Served Power Generation Aerospace Pumps Valves Food Special Machinery
Grade Stainless Steel Forgings 303 304 309 310 316 317 321 330 333 347 403 405 409 410 416 418 420 422 430 431 440 254 SMO Duplex 2205 Duplex 2507 Nitronic Ferralium 255 Alloy 20 174 PH 138 MO 155PH

Nickel Alloys High Temperature Alloy Forgings L605 Nickel 200 amp 201 400 K500 600 601 625 706 718 X750 800 825 900 901 903 907 909 Haynes 188 A286 Hastelloy B C S and X 904L AL6XN C276 C22 Haynes 120

Alloy Steel Forgings 4130 4140 4142 4145 4150 4320 4330 4340 4350 4620 4820 6150 8620 8630 8822 9310 52100 HY80 HY100 9315 300M Nitralloy 135M 1722 

Aluminum Forgings 2014 2024 2025 2219 2618 3003 5083 6061 7049 7050 7075 7079 7149 7150 and 7175

Copper Forgings Titanium Forgings 6AL4V Commercially Pure Grade 2 Grade 7 and Grade 12
Individually forged disc offer greater strength due to refinement of grains in the forging process Our capabilities for individually forged discs are
3 DIA up to 38 DIA 1500 lbs max
Individually forged no torch cut on OD
to 12 in thickness
No minimum requirement

Nickel Wire is a high-performance metal wire manufactured from high-purity nickel or nickel alloys. It is known for excellent corrosion resistance, high-temperature strength, electrical conductivity, and resistance to oxidation.

Material : Nickel (Ni)
Nickel Content : 99.0% - 99.99%
Alloy Grades : Ni200, Ni201, Nickel Alloy Grades
Diameter Range : 0.025 mm - 10 mm (custom sizes available)
Tensile Strength : 350 - 700 MPa (depending on grade)
Melting Point : Approx. 1,455C
Density : Approx. 8.9 g/cm
Electrical Resistivity : Approx. 0.096 - 0.1
Surface Finish : Bright / Oxidized / Polished
Form : Coil / Spool / Straight Wire

Copper Wire Rods are high-purity copper semi-finished products primarily used as raw material for manufacturing electrical wires, cables, conductors, and various copper-based components. Produced through controlled casting and rolling processes, they offer excellent electrical conductivity, thermal conductivity, ductility, and consistent mechanical properties. Copper wire rods are commonly supplied in continuous coils and can be further processed through wire drawing, stranding, and insulation operations. Electrolytic Tough Pitch (ETP) copper grades such as C11000 are widely used for electrical applications. Their consistent quality, excellent workability, and high conductivity make copper wire rods suitable for power transmission, electrical equipment, telecommunications, automotive wiring, and industrial cable production.

Key Specifications
Product Type: Copper Wire Rods
Material: Refined Copper
Common Grade: C11000 / ETP Copper
Copper Purity: Typically 99.90%+ Cu
Typical Diameter: 8 mm, with other sizes available
Form: Continuous coil
Surface: Smooth and clean
Electrical Conductivity: High
Manufacturing Process: Continuous casting and rolling
Customization: Available according to buyer requirements

Rebar Steel, Deformed Steel Rebar Iron Rods for Construction Concrete

Rebar steel deformed steel rebar iron rods for construction concrete building

Standard:AISI, ASTM, BS, DIN, GB, JIS
Grade:HRB335,HRB400
Diameter:5.5-250mm
Length:6-12m
Place of Origin: Thailand
Model Number:Q235
Steel grade:ASTM, Q235,SAE1018,SAE1045,20#,45# etc
Technique:Cold Drawn or Hot rolled available
Surface:HRB400/500/ASTM/BS4449

Copper Non-Ferrous Metal is a premium-quality industrial metal known for its outstanding electrical conductivity, thermal conductivity, corrosion resistance, and excellent formability. Widely used across electrical, electronics, construction, automotive, renewable energy, and manufacturing industries, export-grade copper is available in various forms including cathodes, rods, wires, sheets, bars, plates, and ingots. Manufactured to international quality standards, it offers high purity, superior mechanical strength, and long service life. Our copper products are carefully processed, tested, and packaged to meet global export requirements, ensuring consistent quality, reliable performance, and safe transportation for industrial buyers worldwide.

Product Name - Copper Non-Ferrous Metal
Material - High Purity Copper
Purity - 99.90% - 99.99% Cu
Forms Available - Cathodes, Rods, Bars, Sheets, Plates, Wires, Ingots
Color - Reddish Brown
Density - 8.96 g/cubic centimetre
Melting Point - 1,085 Degree Celsius
Conductivity - Up to 101% IACS
Surface Finish - Bright, Mill Finish, Polished
Supply Condition - Soft, Hard or Annealed

We are an ISO 9001:2015 certified manufacturer and exporter of precision hot-forged Solid Brass 2-Way Rod Connectors, engineered to rigidly link, couple, and reinforce shower support bars and stabilizer tubes in frameless glass enclosures.

Product:Rods
Brand:Renaissance Pipe Fitting Inc.
Sizes:Refer the specification
Condition:New
Rating:4.2, based on 42 reviews
price:Start from 20 USD

SS Rods, ASTM B221, UNS N06600, UNS N02200, UNS N06601, UNS N08800 High Nickel Alloy Rods, supplier.
RFP India is India's well-known manufacturer, supplier and exporter of Rods, which is an iron alloy with a very low carbon (less than 0.08%) content in contrast to cast iron (2.1% to 4%), and has fibrous inclusions known as slag up to 2% by weight. Many items, before they came to be made of mild steel, were produced from rods, including rivets, nails, wire, chains, rails, railway couplings, water and steam pipes, nuts, bolts, horseshoes, handrails, wagon tires, straps for timber roof trusses, and ornamental ironwork. Rods might be round, square, rectangle or flat, and flat rods might be narrow or broad. Rod iron is usually a cut from flat bar iron in a slitting mill to provide the raw material for nails.

Copper Rods For General Engineering & Electrical Industries :

Phosphorus deoxidised non arsenical Copper
Fabrication Properties
Capacity for being
Cold workedExcellent
Hot FormedExcellent
Suitability for
BrazingGood
SolderingGood
Immunity to Hydrogen
EmbrittlementExcellent

Uses: House hold & General Purpose.
Physical Properties:
TemperTensile strength Kg/mm2 Min.Elongation % on 5.65 A Min.
Annealed21.533
As Manufactured23.513


Chemical Requirements:
Copper (Incl. Silver)99.85% Min.
Phosphorus0.013 to 0.05%
Total Impurities0.06% Max.

IS 288/ 1981
Arsenical Copper
Fabrication Properties
Capacity for being
Cold workedExcellent
Hot FormedExcellent
Suitability for
BrazingGood
SolderingGood
Immunity to Hydrogen
EmbrittlementExcellent

Uses: Locomotive boiler stay bolts & Rivets, Plates for locomotive fire boxes etc.
Chemical Requirements:
Copper Silver99.2% Min.
Arsenic0.2 to 0.5%

Nickel, Nickel - Alloys And Copper - Nickel

Cupro Nickel Tubes 95/5, 90/10 & 70/30 Marine Application :

These Cupro Nickel tubes & pipes for Marine application are very important for all Industrial fields. The company has experience in these areas and is able to supply these tubes in accordance with most international standards and special customer requirements.

Cupro Nickel Tubes 95/5, 90/10 & 70/30 Automobile Industries :

he Move toCopper-Nickel Tubing

Copper had been provedsince the early days to have many good attributes. It was easy to bend and hadvery high corrosion resistance, but there was concern about its lowcorrosion-fatigue strength. When copper-nickel was introduced, it displayedcorrosion resistance similar to copper, higher general strength and betterfatigue strength. Good formability allows ease of flaring and bending, andalthough the metal cost is greater than that of steel alternatives,copper-nickel is very attractive in view of its extra life, trouble-freeinstallation and safety/reliability characteristics.



Properties ofCopper-Nickel Brake Tubing

The copper-nickelalloy used for brake tubing typically contains 10% nickel, with iron andmanganese additions of 1.4% and 0.8% respectively. The product conforms to ASTMB466 (American Society for Testing and Materials), which specifies dimensions,tensile strength and yield strength. Formability and internal cleanlinessconform to specifications SAE J527, ASTM A254 and SMMT C5B (Society of Motor Manufacturersand Traders). Also, the alloy meets the requirements for pressure containment,fabrication and corrosion resistance for ISO 4038 (International StandardsOrganization) and SAE J1047.

The mechanicalproperties of alloy C70600 in comparison with steel and copper are shown inspecification.



Alloy C70600 isnormally supplied as redrawn tubing in the annealed condition. The combinationof strength and good ductility give excellent formability.

As copper-nickel issofter than steel, it was first feared that fretting might be a problem.Experience has shown this is not the case.

Copper-nickel braketubing provides superior reliability and assures both manufacturers and vehicleowners improved durability for effective long-life functioning of the brakesystem.