Copper nickel alloy,which has low electric resistance,good heat-resistant and corrosion-resistant, easy to be processed and lead welded.It is used to make the key components in the thermal overload relay,low resistance thermal circuit breaker, and the electrical appliances.It is also an important material for electrical heating cable.It's similar as s type cupronickel.
Copper nickel alloy,which has low electric resistance,good heat-resistant and corrosion-resistant, easy to be processed and lead welded.It is used to make the key components in the thermal overload relay,low resistance thermal circuit breaker, and the electrical appliances.It is also an important material for electrical heating cable.It's similar as s type cupronickel.
Constantan is a type of resistance alloy, which is made up of copper and nickel as the main components.It has a low temperature coefficient of resistance (TCR), and a wide operating temperature range (below 500). It has good properties on mechanical working, high resistance of corrosion. It is used for variable and strain resistance elements in alternative instruments.
Svamitva Steel is a Manufacturer, Exporter, and Supplier of Nickel 200 Sheets, Plates & Coils in India. Nickel 200 Plates (UNS N02200) are non-ferrous metals with properties like high strength and toughness, first-rate corrosion resistance, and high temperature.
ASTM / ASME SB 564 UNS 2200 ( NICKEL 200 ) , UNS 4400 (MONEL 400 ) , , UNS 8825 INCONEL (825) , UNS 6600 (INCONEL 600 ) , UNS 6601 ( INCONEL 601 ) , UNS 6625 (INCONEL 625) , UNS 10276 ( HASTELLOY C 276 )
ASTM / ASME SB 160 UNS 2201 (NICKEL 201 )
ASTM / ASME SB 472 UNS 8020 ( ALLOY 20 / 20 CB 3 )
Copper Alloy
ASTM / ASME SB 61 UNS NO. C 92200 & ASTM / ASME SB 62 UNS NO. C 83600.
ASTM / ASME SB 151 UNS NO. 70600 , 71500 , C 70600 ( CU -NI- 90/10) , C 71500 ( CU -NI- 70/30) ,ASTM / ASME SB 152 UNS NO C 10100 , C 10200 , C 10300 , C 10800 , C 12000, C 12200.
3073 Nickel Products Suppliers
Short on time? Let Nickel Products sellers contact you.
ASTM / ASME SB 111 UNS NO. C 10100, 10200, 10300, 10800, 12000, 12200, 70600, 71500.
ASTM / ASME SB 466 UNS NO. C 70600 (CU -NI- 90/10), C 71500 (CU -NI- 70/30)
Nickel Wire 0.025 mm diameter, 99.9016% purity sold in case of 26 bobbins. Total net weight 5,169g. IGAS Research certified. Minimum order quantity: 1 million meters. Ships from Dubai.
OD: 10 - 325mm
WT: 1.0 - 30mm
Length: up to 12m
Application: Chemical, Petrochemical, Energy, Aerospace, Oil and Gas, Nuclear industries.
Process method: Cold drawn, Cold rolling
Finishing: Heat treatment, annealed, acid washing, manual and mechanical
Chemical Analysis of Alloy 400(UNS NO4400) ASME SB127/AMS 4544
C Mn P S Si Cr Ni Mo Cu Co Cb+Ta Fe
3Max 2.0Max .02Max .024Max .5Max 63Max 28-34 2.5Max
Chemical Analysis of Alloy 600(UNS NO6600) ASME SB163/ASME SB516(inconel 600) W Nr2.4816
C Mn P S Si Cr Ni Mo Cu Co Cb+Ta Fe
.15Max 1.0Max .015Max .5Max 14-17 72Min .5max 6-10
Chemical Analysis of Incoloy800HTASME SB407 ASME407 ASME SB163
C Cr Ni Ti Al Fe Al+Ti Grain
0.06-0.1 19-23 30-35 0.15-0.6 0.15-0.6 39.5Min 0.85-1.2 5 or coarser
Inconel 600 is a nickelbase alloy with excellent carburization, and good oxidation resistance at elevated temperatures.
The alloy is widely used in the heat treating industry.
600 alloy has useful resistance to dry Cl2 and HCl gases at moderately elevated temperatures.
Alloy 600 is not suggested for use at red heat when sulfur is present due to elevated nickel quantities.
Grades 200 and 201 nickel are normally preferred for handling concentrated, high temperature caustic.
However, when sulfur compounds are present as well, or for ammonium hydroxide service,
600 alloy is suggested. 600 alloy is subject to stress corrosion cracking in hot, concentrated caustic alkalies.
To avoid stress corrosion cracking, the 600 alloy fabrication should be fully stress relieved prior to use.
A minimum treatment of 1650°F for 1 hour is suggested, but 1800-1850°F for 1 hour preferred.
Name Nickel Sheet / Nickel Plate
Standard ASTM, ISO, JIS, GB
Material Ni200, Ni201, Inconoly, Inconel, Hastelloy etc.
Dimension THK 0.5 ~ 60mm * W=2000mm * L= 8000mm
Condition Annealed
Application Chemical Industry, Petroleum Industry, Nuclear Power Industry, Marine Industry, Electrolytic Industry etc.
Certificate ISO 9001:2008, MTC or The Third Party
Name Nickel Bar / Nickel Rod
Standard ASTM, ISO, JIS, GB
Material Ni200, Ni201, Inconoly, Inconel, Hastelloy etc.
Dimension Dia. 6 ~ 200 mm
Condition Annealed
Application Chemical Industry, Petroleum Industry, Nuclear Power Industry, Marine Industry, Electrolytic Industry etc.
Certificate ISO 9001:2008, MTC or The Third Party
We, as manufacturers of high-purity metals, announce that we can supply the following products:
Nickel wire grade DKRNT-0,025-KT-NP (diam. 0.025 mm)
Quality:
NP2 (99,6 -99,8% Ni),
NP1 (99,93 -99,98% Ni),
NP0 (99,99 -99,995% Ni)
Quantity: up to 500 kg monthly.
Price:
NP2 (99,6 -99,8% Ni). Price: from 0,55 EUR/meter.
NP1 (99,93 -99,98% Ni). Price: from 1,10 EUR/meter.
NP0 (99,99 -99,995% Ni). Price: from 5,75 EUR/meter.
Minimum order 5000000 metres.
Our production of extra pure metals is located in Azerbaijan.
Prices are on FCA Baku sale condition, factory manufacturer.
Origin: USA, Egypt, Germany
Quantity: 6 million metre of Nickel Wire.
Available now - trial 1000 meters
Price $3.5 per metre Fob Dubai.
If you are interested, please send us your end buyer's LOI to
On a nickel wire of Russia Moscow-0.025 of KT-NP2 party No. 1207/55000/1
The net weight 27 541.0g, length is 6 259 318, number of coils- 120 pieces.
Certificate of Origin issued in the Russian Federation No: 2618909 Date: 2023-09-10
