REFERENCE
TSWS2
CATEGORY
Converting Equipment
MANUFACTURER
Gutenberg
MODEL
TSWS2
DESCRIPTION:
This machine is applied to rewind the finished round rope.
This is a good machine for rewind many small paper rolls coming from Paper Rope Machine into one bigger paper roll with 3500 to 5000 meters longer.
In this way, the big paper roll is convenient to be put on Paper Handle machine to make handles.
Bigger and longer paper roll means continuous and non-stop production and high efficiency and raise the quality and reduce the defectives.
It is a very good supporting machine for Paper Handle Making Machine.
High Speed
Low Cost
Save material
Easy to use and maintain
Technical Data
Core Diameter of Raw Rope Roll: 76 mm
Core Diameter of Final Rope Roll: 180 mm
Final Rope Reel Diameter: 400-500 mm
Max. Production Speed: 80-150 M/min
Machine supply: 380V, 50Hz, 3 phases, 4 wires
Power: 2.2 KW
Weight: 150 KGS
Dimension: L 1050 x W 800 x H 1200 mm
Cutted nylon tyres. only the sites of the tyres for : Fenders, Buffers ( Maritiem, Boats) , Fishingnets ( deepsea) Scrap or make part of product like Steel Tubes connect seal.
A Frenzy of Flavor Remix your snack game with the intense taste of our hot spicy chili pepper artificially flavored chips These crunchy rolled corn tortilla chips come in an electrifying blue color that boldly fire up your tastebuds
Snack OnTheGo Packaged to match your lifestyle our rolled tortilla chips make the perfect snack option for when youre up late studying headed to school embarking on an exciting road trip or hanging with friends at a party
A Feast for the Brave We designed our rolled corn tortilla chips with one thing in mind to deliver a worthy snack for those who dare Simply pop open a bag and conquer those cravingsone boldlyflavored chip at a time
Share if You Dare Each individual bag of our rolled tortilla chips is loaded with enough intensity to fire up the taste buds of everyone around you So grab a bag and share a storm of flavor with your friendsor dont We understand
Supercharge the Way You Snack When it comes to snacks we dont back down from flavor Were not satisfied until weve created a maxedout ultratantalizing snack that launches your taste buds into a new dimension Craving yet
DESCRIPTION:
Block bottom MASTER BAG 550 Carrier Bag Machine
working from the roll, In-line twisted loop handle attachment unit, For twisted paper handles
Paper bag cutting length (C) 380-650mm
(380-770mm)
Paper bag width (W) 220-540mm
Paper bag bottom width (H) 80-250 mm
Paper thickness 90-170g/m2
Max. Paper bag speed 120pcs/min
Paper roll width 630-1510mm
Paper roll diameter Dia1200mm
The inner diameter of the paper roll Dia is 76mm
Handle rope height 110-120mm
Handle rope diameter Dia4-6mm
Handle sheet length 190.5mm
Handle sheet width 80-100mm
Machine supply 380V, 50Hz, three-phase, four wires
Power 39KW
Weight 20000 KGS
Dimension L14000*W6000*H3100mm
PLC Yaskawa Japan
Servo Motor Yaskawa Japan
Servo Driver Yaskawa Japan
Cylinder AirTac Taiwan
Low Voltage Electrical Apparatus Schneider Germany
Normal Button Schneider Germany
Emergency Button Schneider Germany
Bearing NSK Japan
Solenoid valve AirTac Taiwan
Photoelectric Eye Color Code Tracking SICK Germany
CATEGORY
Bag Making
Manufacturer
Gutenberg
MODEL
MB 550 TL
SIZE
550 mm.
YEAR
2022
DESCRIPTION:
Block bottom MASTER BAG 550 Carrier Bag Machine
working from the roll, In-line twisted loop handle attachment unit, For twisted paper handles
Paper bag cutting length (C) 380-650mm
(380-770mm)
Paper bag width (W) 220-540mm
Paper bag bottom width (H) 80-250 mm
Paper thickness 90-170g/m2
Max. Paper bag speed 120pcs/min
Paper roll width 630-1510mm
Paper roll diameter Dia1200mm
The inner diameter of the paper roll Dia is 76mm
Handle rope height 110-120mm
Handle rope diameter Dia4-6mm
Handle sheet length 190.5mm
Handle sheet width 80-100mm
Machine supply 380V, 50Hz, three-phase, four wires
Power 39KW
Weight 20000 KGS
Dimension L14000*W6000*H3100mm
PLC Yaskawa Japan
Servo Motor Yaskawa Japan
Servo Driver Yaskawa Japan
Cylinder AirTac Taiwan
Low Voltage Electrical Apparatus Schneider Germany
Normal Button Schneider Germany
Emergency Button Schneider Germany
Bearing NSK Japan
Solenoid valve AirTac Taiwan
Photoelectric Eye Color Code Tracking SICK Germany
Category
Converting Equipment
Manufacturer
Gutenberg
MODEL
MB-1400 SL
SIZE
2400x1800 mm
DESCRIPTION:
The slitting machine can cut the paper roll into the specified size paper roll.
Technical Data
Max. Paper Cutting Width: 1400 mm
Max. Paper Roll Diameter : 1500 mm
Max. Rewinding Roller Diameter: 400 mm
Machine Max. Speed: 450 m/min
Max. Slitting Speed: 400 m/min
Tolerance Slitting Width: =±0.15 mm
Min. Slitting Width: 30 mm
Power Supply: AC 380V, 50HZ, 3 phases, 4 wires
Rated Power: 33 kw
Machine Dimension: L 3800 x W 2400 x H 1800 mm
Machine Weight: About 5000 kg
Parameters
Power: 3 Phases, 380V ±10%, 50 Hz
Compressed Air: Pressure: 0.6 MPa | Oil and Humidity: 8 mg/m3
Installation Height: Max. altitude: 1500 m
Ambient Requirement: Relative Moisture: Max. 65% when 40 C | Temperature Range: 10~40 C
CATEGORY
Bag Making
MANUFACTURER
Gutenberg
MODEL
MB 550 TL
SIZE
550 mm.
YEAR
2022
DESCRIPTION:
Block bottom MASTER BAG 550 Carrier Bag Machine
working from the roll, In-line twisted loop handle attachment unit, For twisted paper handles
Paper bag cutting length (C) 380-650mm
(380-770mm)
Paper bag width (W) 220-540mm
Paper bag bottom width (H) 80-250 mm
Paper thickness 90-170g/m2
Max. Paper bag speed 120pcs/min
Paper roll width 630-1510mm
Paper roll diameter Dia1200mm
The inner diameter of the paper roll Dia is 76mm
Handle rope height 110-120mm
Handle rope diameter Dia4-6mm
Handle sheet length 190.5mm
Handle sheet width 80-100mm
Machine supply 380V, 50Hz, three-phase, four wires
Power 39KW
Weight 20000 KGS
Dimension L14000*W6000*H3100mm
PLC Yaskawa Japan
Servo Motor Yaskawa Japan
Servo Driver Yaskawa Japan
Cylinder AirTac Taiwan
Low Voltage Electrical Apparatus Schneider Germany
Normal Button Schneider Germany
Emergency Button Schneider Germany
Bearing NSK Japan
Solenoid valve AirTac Taiwan
Photoelectric Eye Color Code Tracking SICK Germany
a turnkey solution for your Paper bag business
Shipping
Providing you with a professional container logistic service worldwide
Insurance
covers damages for cargo. Risks covered. Loss or damage during end-to-end transportation
Installation:
10 days installation, running-in and training.
CATEGORY
Converting Equipment
MANUFACTURER
Gutenberg
MODEL
MB-1400 SL
SIZE
2400x1800 mm
YEAR : 2021
DESCRIPTION:
The slitting machine can cut the paper roll into the specified size paper roll.
Technical Data
Max. Paper Cutting Width: 1400 mm
Max. Paper Roll Diameter : 1500 mm
Max. Rewinding Roller Diameter: 400 mm
Machine Max. Speed: 450 m/min
Max. Slitting Speed: 400 m/min
Tolerance Slitting Width: =±0.15 mm
Min. Slitting Width: 30 mm
Power Supply: AC 380V, 50HZ, 3 phases, 4 wires
Rated Power: 33 kw
Machine Dimension: L 3800 x W 2400 x H 1800 mm
Machine Weight: About 5000 kg
Parameters
Power: 3 Phases, 380V ±10%, 50 Hz
Compressed Air: Pressure: 0.6 MPa | Oil and Humidity: 8 mg/m3
Installation Height: Max. altitude: 1500 m
Ambient Requirement: Relative Moisture: Max. 65% when 40 C | Temperature Range: 10~40 C
Description:
Designed to make the flat bottom bag width with or without gusset at high speed.
Max. Speed (double cut) Max. Speed (single cut) Cutting Length (double cut) Cutting Length (single cut) Gusset Width
Bag Width
Bottom Folding Width Flap Width
Paper Width
Paper Roll Dia Applicable Paper Weight
1,200 bags / min* 600 bags / min* 210 ~ 300 mm 310 ~ 620 mm Max. 140 mm 60 ~ 380 mm 15 ~ 30mm 7 ~ 20 mm Max. 1,060 mm Max. f1,300 mm 40 ~ 100 g/m2
Model
* This is mechanical speed and depends on bag size, paperweight and quality.
Major Components of Machine and Description
Paper Roll Stand
Longitudinal Pasting Unit
This is a stand for loading the web for making bags. Major equipment;
1. The paper roll is lifted up by means of a driving motor (0.75kw).
2. Max. paper roll diameter is 1,300mm.
3. Paper roll horizontal adjustment by a handle.
4. Switch box for paper roll lifting(Up-Down)
This is to seam paper web longitudinally for making a tube.
1. Paper web transfer roll
2. 1 set of pasting wheel and glue tank is provided.
3. Auxiliary web drawing unit with a differential device is provided
Forming Unit
Main Unit
The forming unit makes tubes with gusset from the web for making tube using the forming plate.
Major equipment;
1. A fixed forming plate for making 1 size of tube width is included.
2. Manual gusset depth adjustment
3. Nozzle type glue applicator.
This is the most important part of the machine and includes the input from the main motor and output to each component of the machine.
It also includes rollers that draw out tubes, a cutter that cut the tube into the specified length, and various devices that form the bag bottom.
The tube cutting length can be changed in the step of 10 mm by changing the change gears.
Major equipment;
1. Two sets of drawing rollers (Sandblast Type)
2. Rotary cutter with serrated edged or straight edges to cut tube
3. Pinch rollers and bag feed rollers accurately feed the cut tubes.
4. Creasing unit to facilitate bottom forming
5. Flat bottom forming binder to form flat bottom accurately
Bags transferred from the separating cylinder are held, gripped and by running delivery belt, and bags are transferred on the table.
1. Press delivery upper / lower belt
2. Counter to count the preset number of bags
3. Stacking table with conveyor belt.
Steps are provided for easy maintenance and operation, and safety covers are provided.
2 Color Inline Printer will be supplied with the following standard features.
Major equipment;
1. Operate in combination with 638T by direct drive.
2. Capacity of the printer (m/min.) will be suitable to take care in the speed of bag making machine, model 638T.
3. Anilox rollers and ink rollers for 2 colors.
4. Printing cylinders and printing change gears for 1 size for 2 colours
are provided.
5. Drying unit is provided.
CATEGORY
Bag Making
MANUFACTURER
Newlong
MODEL
335T + 504TH
SIZE
280x540 mm.
YEAR
2008
AVAILABILITY :Immediately
DESCRIPTION:
Designed to manufacture self-opening square-bottom bags with twisted paper handles in a fully automated process, which is enabled by an Automatic Sheet Feeder and Twisted Paper Handle Making & Attaching Unit. Optional features, such as J-Cut Unit, Turn-top Device, Cardboard Device also available.
SPECIFICATIONS
STANDARD EQUIPMENT
Automatic Sheet Feeder Unit Handle Patch Making Unit Handle Patch Attaching Unit Tube Forming Unit
Tube Feeding Unit Bottom-Forming Unit Delivery Unit
BAG SIZES
With Handle
Tube length Bag width Bottom width
Top folding height
Without Handle
Tube length Bag width Bottom width
NOTE *
280 540mm 210 350mm 60 160mm
40 60mm
280 600mm 150 350mm 60 160mm
Handle-Centre Distance (Bag width + Bottom Width) shall be in-between 285 to 510 mm.
SHEET SIZE & WEIGHT
With Handle
Sheet width: Sheet length :
Without Handle
Sheet width: Sheet length
Sheet basis weight:
HANDLE & HANDLE PATCH
Sealing Method:
Patch Width:
Patch Cutting Length:
Patch Paper Weight: Patch Paper Roll Dia.: Patch Paper Roll Stand: Patch Paper Roll ID.:
Handle Height: Material of Handle:
MACHINE (Mechanical) SPEED
Our 20ft rollup door container storage and shipping containers have an outside dimension of 20 x 8 x 86 making them an excellent choice for portable onsite storage Our 20 containers feature
Frames constructed from 8 gauge steel
Body construction of 14 gauge steel
Oneinch thick wood floors
Our containers are an ideal choice for short term or long term storage space These are suitable for building supplies commercial use home use and much more Our containers offer secure storage too
Specifications
CATEGORY
Bag Making
MANUFACTURER - Newlong
MODEL : 335T + 504TH
SIZE
280x540 mm.
YEAR
2008
AVAILABILITY : Immediately
DESCRIPTION:
Designed to manufacture self-opening square-bottom bags with twisted paper handles in a fully automated process, which is enabled by an Automatic Sheet Feeder and Twisted Paper Handle Making & Attaching Unit. Optional features, such as J-Cut Unit, Turn-top Device, Cardboard Device also available.
SPECIFICATIONS
STANDARD EQUIPMENT
Automatic Sheet Feeder Unit Handle Patch Making Unit Handle Patch Attaching Unit Tube Forming Unit
Tube Feeding Unit Bottom-Forming Unit Delivery Unit
BAG SIZES
With Handle
Tube length Bag width Bottom width
Top folding height
Without Handle
Tube length Bag width Bottom width
NOTE *
280 540mm 210 350mm 60 160mm
40 60mm
280 600mm 150 350mm 60 160mm
Handle-Centre Distance (Bag width + Bottom Width) shall be in-between 285 to 510 mm.
SHEET SIZE & WEIGHT
With Handle
Sheet width: Sheet length :
Without Handle
Sheet width: Sheet length
Sheet basis weight:
HANDLE & HANDLE PATCH
Sealing Method:
Patch Width:
Patch Cutting Length:
Patch Paper Weight: Patch Paper Roll Dia.: Patch Paper Roll Stand: Patch Paper Roll ID.:
Handle Height: Material of Handle:
MACHINE (Mechanical) SPEED
570 320
410 280
1,050mm 600mm
1,050mm 600mm
80 - 120 g/m2
Acetic Acid Vinyl Glue
Approx. 190.5mm
50mm (Fixed) Patch Paper of 100mm is split into 2 lines)
100 120 g/m2
Max. 1,000mm
2 stands
76mm Dia. (Core Inside Dia.)
170mm including 50mm Patch Width
Twisted Paper Rope or
Twisted PP Rope (should have adequate rigidity)
Max. 70 bags/min. for bags with handle
NOTE: Speed depends on paper quality, basis weight, print accuracy, bag formation including bag sizes, applications, etc.
74 Rolled Oats Suppliers
Short on time? Let Rolled Oats sellers contact you.
