We offer superior quality sponge iron that is also known as direct- reduced iron. Our offered sponge iron is made for high grade, 65-70 fe
Min fem-80%, fet-90-92%, s-0.04% max. Loose in form of lumps.
Sponge iron filter material In industry through a sponge iron production equipment is widely applied iron phosphorus reduction method, method of reduction of iron ore concentrate, etc., the rolling iron phosphorus or ore concentrate after reduced iron press down into pieces, into the roasting tube into the kiln roasting, produce the high quality reduced iron. Sponge iron filter material for the first time into the deaerator, must first after backwashing, remove the sponge iron residue on the surface of the filter material float ash impurities.
118651 Metal Products Suppliers
Short on time? Let Metal Products sellers contact you.
Granular sulfur is the raw material state of sulfur. Granular sulfur consists of small yellow particles that quickly disperse or break down in the soil. Its physical form is solid, and as expected, it has a sulfuric odor. The material is soft, easily crumbles, and is insoluble in water, although it does dissolve in some organic solvents such as carbon disulfide.
It is sulfur that has been taken from the refinery or extracted from the mine and has not been processed. Sulfur can be found in pure form in nature, as well as in combination with other elements. Granular Sulfur is the unprocessed commercial name of the element Sulfur, that is, sulfur with its well-known name. Due to its physical condition, Lamp is the general name used for Sulfur, which is also called chips. Granular sulfur in agriculture, due to the hardness of its structure, oxidation is impossible, it can be used by making it powdered or micronized by physical interventions. In addition, such products are also called Granular Sulfur due to the fact that Powdered or Liquid sulfur can be mixed with other components to make it granular.
Granulated sulphur is mainly used in the production of sulfuric acid, phosphorus fertilizers, plant protection chemicals, paper, food industry, agriculture, auto tires, explosives, chemicals and dyes, wastewater treatment, such as wastewater treatment also finds a wide range of uses and in the steel industry. Granulated sulphur is used in the manufacture of sulfuric acid, phosphate fertilizers and plant protection products, and in the steel industry.
Good quality lump Sulphur is available for sale on immediate basis. Wholesale deliveries of #Lump #suplhur (S) to all interested customers worldwide. Grades 9998; 9995; 9990 originated in Tajikistan. Purity: 99,95%. Bright yellow color. GOST 127.1-93 (HS code 2503 00 9000). Packaging in Big-Bags 1'000 kg. Monthly capabilities: 40,000 mt. MOQ is 2,000 mt. Sulfur is one of the most important agricultural and industrial raw materials and is considered a strategic product #sulfur is an odorless, tasteless and polyvalent nonmetal which is mostly in the form of yellow crystals and is obtained from #sulphide and #sulphate. Sulphur is the primary source in the production of #sulphuric #acid. It's also used by the #fertilizer industry to manufacture primarily #phosphates, #nitrogen, #potassium, and #sulphat
Good quality lump Sulphur is available for sale on immediate basis. Wholesale deliveries of #Lump #suplhur ( S ) to all interested customers worldwide. Grades 9998; 9995; 9990 originated in Kazakhstan. Purity: 99,95%. Bright yellow color. GOST 127.1-93 (HS code 2503 00 9000). Packaging in Big-Bags 1'000 kg. Monthly capabilities: 10'000 mt. MOQ is 1'000 mt.
Sulfur is one of the most important agricultural and industrial raw materials and is considered a strategic product #sulfur is an odorless, tasteless and polyvalent nonmetal which is mostly in the form of yellow crystals and is obtained from #sulphide and #sulphate. Sulphur is the primary source in the production of #sulphuric #acid. It's also used by the #fertilizer industry to manufacture primarily #phosphates, #nitrogen, #potassium, and #sulphat
Characteristic: Good anti-fatigue, Good anti-corrosion, Good anti-abrasion.
Application: Connectors, Springs, Variety of electronic products.
2. Phosphor Bronze Wire For Gold Plating.
Alloy code: C5100(CuSn5).
Diameter: 0.45mm, Round.
Packing meode: DIN-355 Bobbin.
Characteristic: Good anti-fatigue, Good anti-corrosion, Good anti-abrasion.
Application: Phone Jack, Connector.
In addition to Phosphor bronze wire, Cu-OF wire and Nickel silver strip, we also supply various types of non-ferrous metal alloy wire.
Remarks:
(1) Shipping term: FOB Busan port, Korea or CIF.
(2) Payment term: T/T(Wire Transfer).
(3) M.O.Q. will be adjusted based on the specification.
(4) Certification: ISO 14001 & ISO 9001, comply with RoHS.
(5) Country of origin: South Korea.
1. Commodity: Ferrous Metal Scrap with Billet type
2. Billet Size:130x130 and 150x150mm
3. COO: Saudi Arabia
4. Quantity:
1)TO� 20Kmt+MO� 100KmtX12 months
2)TO 50Kmt+MO 250KmtX12 months
5. Price: CIF
1)$475 for 100Kmt(TO 20�¶mt)
2)$420 for 250Kmt(TO 50Kmt)
6. Payment Term: 100% Non-Transferable DLC(MT700) payable at Discharging Port after Inspection
Inconel nickel alloy
It is a solid-solution strengthened nickel-based deformed superalloy with molybdenum and niobium as the main strengthening elements. It has excellent corrosion resistance and oxidation resistance. It has good tensile properties and fatigue properties from low temperature to 980 �° C, and is resistant to salt spray. Stress corrosion in atmosphere. Therefore, it can be widely used in the manufacture of aero-engine parts, aerospace structural parts and chemical equipment. The alloy has good processing and welding properties, and can supply a variety of plates, bars, pipes, wires, strips and forgings
Incoloy is a nickel-chromium-iron alloy, which is a nickel-iron-chromium iron-nickel-based corrosion-resistant alloy designed for anti-oxidation and carbonization when the temperature rises. This alloy is used in high-temperature water vapor, including steam-air-CO2 In mixed gas, it has good corrosion resistance. In some high-temperature and high-pressure water media, its stress corrosion resistance is significantly better than 18-8 stainless steel and Inconel600; it also has good corrosion resistance in H2+H2S media. In the alkaline medium containing NaOH, its stress corrosion resistance is better than high-nickel alloys such as Inconel600.
Monel 404 is a copper-nickel alloy that has high strength and toughness over a wide temperature range and excellent resistance to many corrosive environments. The alloy also has low permeability and good brazing properties, low magnetic induction, and high strength.
Application fields:
Monel 404 is mainly used in chemical and petrochemical and marine development and other fields. It can be used to manufacture various heat exchange equipment, boiler feed water heaters, petroleum and chemical pipelines, containers, towers, tanks, valves, pumps, reactors, shafts, etc.
We can provide the following the form:Monel alloy404 coil; Monel alloy 404 strip;Monel alloy 404 plate; Monel alloy 404 sheets; Monel alloy 404 tube; Monel alloy 404 pipe;Monel alloy 404 flat; Monel alloy 404 bar
Monel 401 has excellent strength and plasticity, and has good pressure processing performance in both cold and hot states. It is a corrosion-resistant alloy with large dosage, wide application and excellent comprehensive performance. The alloy has excellent corrosion resistance in HF and F2 media, and is one of the few important materials that can withstand hydrofluoric acid. An important feature of this alloy is that it generally does not produce stress corrosion cracks and has good cutting performance. A kind of Monel alloy, its alloy structure is a high-strength single-phase solid solution, 3 a nickel-based alloy similar to Monel 400, and the corrosion resistance of the metal is fundamentally obtained by hindering the migration of charged particles through the discharge process of hydrogen ions. Obtained, the addition of 30% Cu by mass fraction minimizes the corrosion rate of TH, Ni in F, Cl and other halogen element ionic media, and the higher the Cu content, the better the resistance to sulfuric acid and phosphoric acid. Adding mass fraction to Monel 401 55% Cu improves the corrosion resistance of the alloy in reducing acids.
Application fields:
Wirewound Resistors
bimetal contact
Electrical and Electronic Applications
Marine Engineering
Chemical and Hydrocarbon Processing Equipment
petrol and fresh water tanks
Distiller
degas heater
Boiler feed water heaters and other heat exchangers
Valves, pumps, shafts, fittings and fasteners
Industrial heat exchanger
Chlorinated solvents
Crude distillation tower
We can provide the following the form:Monel alloy401 coil; Monel alloy 401 strip;Monel alloy 401 plate; Monel alloy 401 sheets; Monel alloy 401 tube; Monel alloy 401 pipe;Monel alloy 401 flat; Monel alloy 401 bar
Incoloy 903 is a high-temperature alloy material, also known as Inconel 903, which is a kind of nickel-based alloy. It is mainly composed of nickel, chromium, iron, cobalt, copper, titanium, aluminum and other elements. It has good high temperature strength, creep resistance and corrosion resistance, and is widely used in aerospace, petrochemical, energy and other industries under high temperature and high pressure environments. and other fields.
Following are some features and applications of Incoloy 903:
characteristic
High temperature strength: It has good strength and rigidity at high temperature, and can withstand stress and load under high temperature and high pressure environment;
Creep resistance: It can be used for a long time without deformation under high temperature and high pressure environment;
Corrosion resistance: good corrosion resistance in strong acid, strong alkali and other corrosive media;
Machinability: Incoloy 903 can be machined, forged and welded through a variety of processing techniques.
The international standards for Incoloy alloy 903 in various countries are as follows:
United States: AMS 5800, AMS 5801, AMS 5802, AMS 5803, AMS 5826, ASTM B166, ASTM B408, UNS N19903
Germany: DIN 17742, DIN 17754, W.Nr. 2.4633
United Kingdom: BS HR 6, BS 3076
Europe: EN 10095
We can provide the following the form:Incoloy alloy903 coil; Incoloy alloy903 strip;Incoloy alloy903 plate; Incoloy alloy903 sheets; Incoloy alloy903 tube; Incoloy alloy903 pipe;Incoloy alloy903 flat; Incoloy alloy903 bar
BS:HR 5/JIS:NW4893/UNS:N19903/W.Nr:2.4665
Incoloy 903 has a wide range of applications, mainly used in the following fields:
Aerospace industry: components such as aero-engines, aero-bearings, gas turbines, etc.;
Petrochemical industry: such as chemical reactors, high pressure vessels, steam generators and other equipment;
Energy industry: such as nuclear reactor components, heat exchangers, coal-fired power plant boilers and other equipment;
Other fields: such as the manufacture of high-temperature valves, heat treatment furnaces, medical equipment, etc.
Haynes 188 is a high-temperature, high-strength, and high-corrosion-resistant superalloy developed and produced by Haynes International in the United States. It is typically used in high-temperature, high-pressure, and corrosive environments. Haynes 188 alloy is renowned for its outstanding high-temperature strength and excellent corrosion resistance.
The main components of Haynes 188 alloy include nickel, chromium, molybdenum, iron, titanium, aluminum, and tantalum. The combination of these elements gives Haynes 188 extremely high heat resistance and corrosion resistance. It can be used at temperatures as high as 1095 and has excellent oxidation and thermal corrosion resistance. Additionally, Haynes 188 has good machinability, weldability, and castability, making it suitable for manufacturing components of various shapes and sizes.
The following are the international standards for Haynes 188 alloy:
United States: AMS 5608, AMS 5772, AMS 5801, AMS 5796, AMS 5797, AMS 5800, AMS 5879, AMS 6925, AMS 5803, AMS 5596, AMS 5708, AMS 5804, AMS 5806, AMS 5799, AMS 5836, AMS 5875, AMS 5954, ASTM B574, ASTM B574M, ASTM B435, ASTM B582, UNS R30188
Europe: EN 2.4683, EN 2.4684, EN 2.4694
Germany: DIN 17743
France: AFNOR Z 20 CNDT 35.20, AIR 9165
United Kingdom: BS HR 203, BS HR 504, BS HR 505
Japan: JIS NW 5886
We can provide the following the form:Haynes 188 coil; Haynes 188 strip;Haynes 188 plate; Haynes 188 sheets; Haynes 188 tube; Haynes 188 pipe;Haynes 188 flat; Haynes 188 bar
GB:GH5188/JIS:NW 6190/UNS:R30188/W.Nr:2.4683
Haynes 188 is primarily used in aerospace, petrochemical, chemical, energy, and marine fields. In aerospace, Haynes 188 is commonly used to manufacture components such as turbine blades, combustors, and nozzles in turbine engines. In petrochemical, chemical, and energy fields, Haynes 188 is often used to manufacture petrochemical reactors, catalyst carriers, high-temperature pipelines, corrosion-resistant coatings, and oil extraction equipment. In the marine industry, Haynes 188 is commonly used to manufacture components in marine environments such as propellers and bearings.
Overall, Haynes 188 alloy has excellent high-temperature, high-strength, and high-corrosion resistance properties and is widely used in various industrial fields. It is an important superalloy material.
118651 Metal Products Suppliers
Short on time? Let Metal Products sellers contact you.
