Size - Thikness
(mm) (mm)
20 x 20
25 x 25
32 x 32
40 x 40
50 x 50
65 x 65
75 x 75
100 x 100
125 x 125
150 x 150
0.90 mm
up to
3.00 mm
* Standerd Length 6 m
* Customnized lengths are also accepted
Laksteel Rectangular Tubes (galvanized & black iorn)
Size (mm) - Thikness (mm)
40 x 20
50 x 25
75 x 40
100 x 50
125 x 65
150 x 75
200 x 100
0.90 mm
up to
3.00 mm
* Standerd Length 6 m
* Customnized lengths are also accepted
Laksteel Molding Square Tube is available in Non colour and colour bonded Hi-tensile, and Soft (G550 and G350) and G.I material. This is for industrial, commercial and, domestic applications. Laksteel molding square tube ideally suitable for Aluminium, Partition frames, light weight frames and light weight structure.
Product Specification
Size (mm) 40 x 40
Tensil Strength G550 (Hi-ten) G350 (Soft)
Coating Class AZ 150
Recommended total coated thickness 0.70mm, 0.47mm, 0.40mm and 0.35mm.
10 Metal Castings Forgings Suppliers
Short on time? Let Metal Castings Forgings sellers contact you.
Lakdek Gutters are available in ten standard designs of the same material. Generally with a thickness of 0.47mm and 0.40mm. Customized designs and thickness in substantial quantities can also be supplied upon request. The durability and the aesthetic appearance of the Gutters, manufactured in a wide range of colours, present an attractive profile to buildings.
For walls, fascias, fences, awnings and gates. Lakdek Cladding is available in customized lengths.
Product Specifications
Feeding Width - 1000mm Effective Cover Width - 900mm
Rib Height - 15mm Tensile Strength - G550
Coating Class - AZ 150
Recommended Total Coated Thickness -
0.47mm, 0.40mm and 0.35mm
Recommended Screw - Steel Frames - 12 x 25, 12 x 20
Material Specifications
Standards Code -
Material - 55% Aluminium, 43.4% Zinc, 1.6% Silicon alloy coated steel base
Tensile Strength - 550 N/mm2 (Grade 550) Hi-ten
350 N/mm2 (Grade 350) Soft
Coating Class - AZ 150 (150gms/m2 of Zinc Aluminium coating on base metal)
International Standard
AS1397
Australian Standard
ASTMB 117
Lakdek Sandwich Panel is a self supporting metal panel insulated with EPS for roofing, and walling to be used in industrial, commercial buildings and refrigerated rooms., The panel is coated with AZ100 Zinc Aluminium alloy for superior durability. The exterior, side is coated with 20 microns of regular polyester finish coat over 5 microns of, polyester primer.
Benefits of using Lakdek EPS Sandwich Panel
1. Long life and very low maintenance cost.
2. Good sound insulation.
3. High load bearing capacity at low weight.
4. Excellent and durable thermal insulation.
5. Absolute water and vapour barrier.
6. Easy repair and replacement in case of damage.
7. Easy and speed of installation.
8. Excellent air tightness and free of thermal bridges
which result in considerable energy savings.
EPS Sandwich Panel Specification
Zn/Al Sheet Thickness - 0.3mm – 0.6mm
Core Materials - 50mm – 250mm
Effective Width (Cladding) - 950mm – 1150mm
Effective Length - By customized
