Find Verified Medical Equipment Machinery Suppliers, Manufacturers and Wholesalers

Gas Generator

Reactor & Condenser

FINGERTIP PULSE OXIMETER

Parameters:

Two parameters:SPO2, Pulse Rate.

Waveforms:

SpO2 Waveform.

Features:

1 COLOR OLED display, four direction adjustable.

2 SpO2 and pulse monitoring, and Waveform display.

3 With menu operation.

4 With beep and alarm.

5 Low-power consumption, continuously work for 50 hours.

6 Small in size, light in weight, and convenient to carry.

7 Low voltage alarm display, Auto power-off.

8 Runs on standard AAA batteries.

Detailed descriptions of product functions:

SPO2:

1 Measurement range: 70%-99%

2 Accuracy: 2% on the stage of 70%-99%, unspecified(<70%) for SPO2

3 Resolution: 1%

4 Low perfusion: <0.4%

PR:

1 Measurement: range:30BPM-240BPM

2 Accuracy: 1BPM or 1%(the larger one)

3 Power: two AAA 1.5V alkaline batteries

4 Power consumption: below 30m

5 Automatic power-off: the product shuts down automatically after no signal for 8 seconds

Measuring Range - 0-100%
Range of Precision - 70-10%
Measuring Precision - 2%
Resolution - 1%
Data update time - 1s

Pulse Rate

Measuring Range - 18-250bpm
Range of Precision - 25-250bpm
Measuring Precision - 3bpm
Resolution - 1bpm
Data update time - 1s

Packing Information

Working Size - 7cm*3cm*2.4cm
Packing Size - 40cm*37cm*24cm
N.W. - 0.075kg
G.W - 0.15kg

This recertified Medical MD Oxygen Cylinder is perfect for professional or personal home oxygen use. With a 14.6 cu ft capacity,this medical oxygen cylinder is perfect for portability and smaller spaces. This lightweight, easy to transport aluminum requalified cylinder is DOT approved, and ready for medical or industrial use. It comes fitted with a CGA870 post valve installed and a freshly painted dome in a Medical Green color for easy identification.

PREMIUM CONSTRUCTION
Reconditioned
High-quality aluminum body
Clearcoat protected
Medical green rust-resistant painted dome
CGA870 medical post valve installed
Approximately 4.4â?³ in diameter x 16.3â?³ in height* (with valve)
Weighs approximately 6 pounds
Capacity 14.6 cubic foot
2015 PSI service / 3360 PSI test pressure
Stamped DOT-3AL2015
5-year retest interval
Recertified test within 180 days prior to shipment

Technique Parameter

Oxygen flow rate .. 1L-5L
Oxygen concentration .. 93% + 3%
Rated voltage / Power .. AC220+V 22V ,50Hz + 1Hz
Material .. Plastic
Oxygen concentration .. 0.5-3L/min + 90%
Flow fluctuation .. 0.7L/min
Atomization amount .. + 0.2ml/min
environment temperature .. 5-40
humidity range .. 80%
Atmospheric pressure range .86kpa -- 106kpa
Size .. L448*W245*H492
Weight .. 14.5g


1. Headset type components (optional)
2. Nasal tube assembly (optional)
3. Atomizer assembly

Technique Parameter

Oxygen flow rate .. 1L-5L
Oxygen concentration .. 93% + 3%
Rated voltage / Power .. AC220V + 22V ,50Hz + 1Hz
Material .. Plastic
Oxygen concentration .. 0.5-3L/min 90%
Flow fluctuation .. 0.7L/min
Atomization amount .. 0.2ml/min
environment temperature .. 5-40
humidity range .. 80%
Atmospheric pressure range .. 86kpa -- 106kpa
Size .. L448*W245*H492
Weight .. 14.5g

1. Headset type components (optional)
2. Nasal tube assembly (optional)
3. Atomizer assembly

Mini Wheel Chair

Application - Medical and Household
Seat Back Upholstery - Nylon
Push hand - with rubber hand grip and hand brake
Warranty - 1 years limited lifetime
Custom Services - OEM, ODM, ODM, Customize Brand, Graphic and Packing.

Warranty: 2 years
After-sale Service: Online technical support
Material: metal
Shelf Life:2 years
Instrument classification:Class II
Safety standard: none
Application: Cardiology

Code 85200: Made of non-woven fabric. Hypoallergenic adhesive, leaves little or no residue

Features:
Made by non-woven fabric.

Hypoallergenic adhesive, leaves little or no residue.

Porous and breathable.

Strong adhesion, yet easy to remove.

Color: White or flesh

Size: 1.25 cm x 9.14 M (1/2x10yds)
2.50 cm x 9.14 M (1x10yds)
5.00 cm x 9.14 M (2x10yds)
7.50 cm x 9.14 M (3x10yds)

Hand function position fixed splint (AJY-S09)

It is used for the fixation of stable fractures of the hand and wrist, the fixation of neuromuscular and tendon injuries, and the fixation of functional positions after orthopaedic surgery.
Prevent deformity caused by bone and joint disease in thumb-to-finger and palm-to-hand positions shape.

337*170*3.2mm


LOW TEMPERATURE THERMOPLASTIC SHEET

Product features:
Low temperature thermoplastic sheet is a new type of material made of specially synthesized polymer polycaprolactone treated by a series of chemical methods. Molecules are in a stable state at room temperature (10-30C), and can be softened after being heated in 65-70C water for 1-3 minutes. Curing in 3-5 minutes at room temperature.
It has the advantages of light weight, high strength, good air permeability, not afraid of water, non-toxic, odorless, non-irritating to the skin, etc., and has biodegradability.

Scope of application:
1. Fixation after reduction of fractures and joint dislocations
2. Postoperative fixation of soft tissue injuries such as joint ligaments, nerve and tendon injuries
3. Bone, joint tuberculosis, acute and chronic osteomyelitis, septic arthritis, primary bone Fixation during conservative treatment such as tumor
metastasis or after debridement
4. Joint deformity, nerve palsy, cerebral palsy, scoliosis correction and postoperative fixation in children and fixed
5. Fixation after burns and other plastic surgery operations
6. Production and application of rehabilitation braces and orthoses
7. Posture placement and fixation during radiotherapy

Thumb-fixed splint (Herringbone) AJY-S02

It is used for thumb metacarpal bone, acute metacarpal arthritis, thumb sprain, rheumatoid arthritis, post-tiger occidental occidental surgery and thumb function fixation after median nerve injury.

200*165*3.2mm


LOW TEMPERATURE THERMOPLASTIC SHEET

Product features:
Low temperature thermoplastic sheet is a new type of material made of specially synthesized polymer polycaprolactone treated by a series of chemical methods. Molecules are in a stable state at room temperature (10-30C), and can be softened after being heated in 65-70C water for 1-3 minutes. Curing in 3-5 minutes at room temperature.
It has the advantages of light weight, high strength, good air permeability, not afraid of water, non-toxic, odorless, non-irritating to the skin, etc., and has biodegradability.

Scope of application:
1. Fixation after reduction of fractures and joint dislocations
2. Postoperative fixation of soft tissue injuries such as joint ligaments, nerve and tendon injuries
3. Bone, joint tuberculosis, acute and chronic osteomyelitis, septic arthritis, primary bone Fixation during conservative treatment such as tumor
metastasis or after debridement
4. Joint deformity, nerve palsy, cerebral palsy, scoliosis correction and postoperative fixation in children and fixed
5. Fixation after burns and other plastic surgery operations
6. Production and application of rehabilitation braces and orthoses
7. Posture placement and fixation during radiotherapy

Elbow Joint Splint (AJY-S12)

It is used for elbow joint fixation for tendon, soft tissue, and nerve injury in the elbow joint in time for postoperative fixation of the joint.

448*260*3.2mm


LOW TEMPERATURE THERMOPLASTIC SHEET

Product features:
Low temperature thermoplastic sheet is a new type of material made of specially synthesized polymer polycaprolactone treated by a series of chemical methods. Molecules are in a stable state at room temperature (10-30C), and can be softened after being heated in 65-70C water for 1-3 minutes. Curing in 3-5 minutes at room temperature.
It has the advantages of light weight, high strength, good air permeability, not afraid of water, non-toxic, odorless, non-irritating to the skin, etc., and has biodegradability.

Scope of application:
1. Fixation after reduction of fractures and joint dislocations
2. Postoperative fixation of soft tissue injuries such as joint ligaments, nerve and tendon injuries
3. Bone, joint tuberculosis, acute and chronic osteomyelitis, septic arthritis, primary bone Fixation during conservative treatment such as tumor
metastasis or after debridement
4. Joint deformity, nerve palsy, cerebral palsy, scoliosis correction and postoperative fixation in children and fixed
5. Fixation after burns and other plastic surgery operations
6. Production and application of rehabilitation braces and orthoses
7. Posture placement and fixation during radiotherapy

Achilles tendon dorsal splint (AJY-S11)

It is used for dorsal fixation after Achilles tendon injury, topological fixation of supporting foot.

442*247*3.2mm


LOW TEMPERATURE THERMOPLASTIC SHEET

Product features:
Low temperature thermoplastic sheet is a new type of material made of specially synthesized polymer polycaprolactone treated by a series of chemical methods. Molecules are in a stable state at room temperature (10-30C), and can be softened after being heated in 65-70C water for 1-3 minutes. Curing in 3-5 minutes at room temperature.
It has the advantages of light weight, high strength, good air permeability, not afraid of water, non-toxic, odorless, non-irritating to the skin, etc., and has biodegradability.

Scope of application:
1. Fixation after reduction of fractures and joint dislocations
2. Postoperative fixation of soft tissue injuries such as joint ligaments, nerve and tendon injuries
3. Bone, joint tuberculosis, acute and chronic osteomyelitis, septic arthritis, primary bone Fixation during conservative treatment such as tumor
metastasis or after debridement
4. Joint deformity, nerve palsy, cerebral palsy, scoliosis correction and postoperative fixation in children and fixed
5. Fixation after burns and other plastic surgery operations
6. Production and application of rehabilitation braces and orthoses
7. Posture placement and fixation during radiotherapy

Wrist Splint (Tubular Type) AJY-S07

For wrist or distal forearm fractures, functional fixation of wrist arthroplasty, and rest for wrist arthritis and other lesions

Position immobilization or lunate dislocation colles fracture fixation.

300*280*3.2mm


LOW TEMPERATURE THERMOPLASTIC SHEET

Product features:
Low temperature thermoplastic sheet is a new type of material made of specially synthesized polymer polycaprolactone treated by a series of chemical methods. Molecules are in a stable state at room temperature (10-30C), and can be softened after being heated in 65-70C water for 1-3 minutes. Curing in 3-5 minutes at room temperature.
It has the advantages of light weight, high strength, good air permeability, not afraid of water, non-toxic, odorless, non-irritating to the skin, etc., and has biodegradability.

Scope of application:
1. Fixation after reduction of fractures and joint dislocations
2. Postoperative fixation of soft tissue injuries such as joint ligaments, nerve and tendon injuries
3. Bone, joint tuberculosis, acute and chronic osteomyelitis, septic arthritis, primary bone Fixation during conservative treatment such as tumor
metastasis or after debridement
4. Joint deformity, nerve palsy, cerebral palsy, scoliosis correction and postoperative fixation in children and fixed
5. Fixation after burns and other plastic surgery operations
6. Production and application of rehabilitation braces and orthoses
7. Posture placement and fixation during radiotherapy

Thumb plate (tubular type) AJY-S03

For the first metacarpophalangeal joint, thumb phalanx, metacarpal fracture and wrist dislocation fixation.

210*145*3.2mm


LOW TEMPERATURE THERMOPLASTIC SHEET

Product features:
Low temperature thermoplastic sheet is a new type of material made of specially synthesized polymer polycaprolactone treated by a series of chemical methods. Molecules are in a stable state at room temperature (10-30C), and can be softened after being heated in 65-70C water for 1-3 minutes. Curing in 3-5 minutes at room temperature.
It has the advantages of light weight, high strength, good air permeability, not afraid of water, non-toxic, odorless, non-irritating to the skin, etc., and has biodegradability.

Scope of application:
1. Fixation after reduction of fractures and joint dislocations
2. Postoperative fixation of soft tissue injuries such as joint ligaments, nerve and tendon injuries
3. Bone, joint tuberculosis, acute and chronic osteomyelitis, septic arthritis, primary bone Fixation during conservative treatment such as tumor
metastasis or after debridement
4. Joint deformity, nerve palsy, cerebral palsy, scoliosis correction and postoperative fixation in children and fixed
5. Fixation after burns and other plastic surgery operations
6. Production and application of rehabilitation braces and orthoses
7. Posture placement and fixation during radiotherapy

Surgical Blades are precision-engineered sterile cutting instruments designed for use in surgical, medical, dental, and veterinary procedures. Manufactured from high-quality stainless steel or carbon steel, these blades provide exceptional sharpness, precision, and durability for accurate incisions.

Product Type: Sterile Disposable Surgical Blades
Material: Medical-Grade Carbon Steel or Stainless Steel
Blade Sizes: No. 10, 11, 12, 15, 20, 21, 22, 23, 24 and other standard sizes
Blade Finish: Precision Ground
Sterilization: Gamma Radiation or EO (Ethylene Oxide) Sterilized
Compatibility: Standard Surgical Blade Handles (No. 3, No. 4, etc.)
Usage: Single-use disposable
Shelf Life: 5 years (under recommended storage conditions)

A hospital-grade diagnostic stethoscope is a professional acoustic medical device designed for accurate auscultation (listening to internal body sounds) of the heart, lungs, blood vessels, and gastrointestinal system.

Type : Acoustic / Dual-head diagnostic stethoscope
Application : Hospitals, clinics, emergency care, medical training
Chestpiece Material : Stainless steel / chrome-plated alloy
Chestpiece Design : Dual-sided diaphragm and bell
Diaphragm Type : Tunable or standard diaphragm
Frequency Range : Approx. 20 - 1,000 Hz (model dependent)
Tube Type : Single or dual-lumen PVC/silicone tubing
Tube Length : Approx. 65 - 75 cm
Ear Tips : Soft-sealing silicone ear tips
Weight : Approx. 120 - 200 g
Latex Free : Available
Patient Use : Adult and pediatric options available
Color Options : Black, blue, green, red, custom colors

Wheelchair

This wheelchair is designed to provide reliable mobility, comfort, and ease of use for individuals with limited movement. Built with a sturdy frame and ergonomic design, it offers excellent support for daily indoor and outdoor use. The wheelchair features smooth maneuverability, comfortable seating, and durable construction, making it suitable for hospitals, care facilities, rehabilitation centers, and personal use. Its practical design ensures user comfort while allowing caregivers to assist with minimal effort.

Specifications:

* Frame Material: High-strength steel or aluminum alloy
* Seat Material: Durable nylon or breathable fabric
* Seat Width: 16-20 inches
* Seat Depth: 16-18 inches
* Overall Width: 24-28 inches
* Weight Capacity: Up to 100-150 kg
* Rear Wheel Size: 22-24 inches
* Front Caster Size: 6-8 inches
* Folding Design: Yes
* Armrest Type: Fixed or detachable
* Footrest Type: Swing-away and adjustable
* Braking System: Manual wheel locks
* Cushion: Comfortable padded seat and backrest
* Mobility Type: Self-propelled or attendant-propelled
* Application: Medical, rehabilitation, and personal mobility support

Wheelchair

This wheelchair is designed to provide reliable mobility, comfort, and ease of use for individuals with limited movement. Built with a sturdy frame and ergonomic design, it offers excellent support for daily indoor and outdoor use. The wheelchair features smooth maneuverability, comfortable seating, and durable construction, making it suitable for hospitals, care facilities, rehabilitation centers, and personal use. Its practical design ensures user comfort while allowing caregivers to assist with minimal effort.

Specifications:

* Frame Material: High-strength steel or aluminum alloy
* Seat Material: Durable nylon or breathable fabric
* Seat Width: 16-20 inches
* Seat Depth: 16-18 inches
* Overall Width: 24-28 inches
* Weight Capacity: Up to 100-150 kg
* Rear Wheel Size: 22-24 inches
* Front Caster Size: 6-8 inches
* Folding Design: Yes
* Armrest Type: Fixed or detachable
* Footrest Type: Swing-away and adjustable
* Braking System: Manual wheel locks
* Cushion: Comfortable padded seat and backrest
* Mobility Type: Self-propelled or attendant-propelled
* Application: Medical, rehabilitation, and personal mobility support