Product Description
Unique patented three-roller stripping cotton;
Increase in the gill plate carding roller;
After the first three additional two fixed cover;
Brake fast-Astoria;
Used Step-pressure roll;
Use of Adolf timing belt drive;
About closed-end security cover;
Quality of the MCC.
Technical Specifications
Scope of application: Apply to the local cotton and chemical fiber spinning pure or blended with roll feeding.
Quantitative production: 3.5 ~ 6.5 g / m
Production: 35 kg / h
Working width: 1000 mm
Additional pieces of comb:
Roller carding a board
Cover fixed after 2
Cover fixed before the
Drawing a multiple of total: 67 ~ 120
Spurs roll diameter of the work: �¦250 mm
Barbed roller speed of the work:
Cotton: 1070 to /
Fiber: 980 /
Work of the cylinder diameter: �¦1289 mm
Cylinder speed of the work:
Cotton: 360 /
Fiber: 330 /
Work of Adolf diameter: 706 mm
Speed of the work of Adolf: 21.3 ~ 38.2 to /
Product Description
Disk bale plucker is suitable for the plucking of all classes of raw cotton, cotton chemical fiber and middle-long fiber shorter than 76mm. It's the first procedure of the machine and consists of pulley, central axis, expansion tube and ground rail, etc., and this model can be used in double.
For a large number of raw material varieties with great differences, this model helps improve the number of mixed bale and reduces the mixing units & working quality.
Disk plucker is an important machine in blowing-carding line. It is applicable for kinds of raw cotton. Cotton content chemical fiber, middle and long chemical fiber, generally two set of plucker are put into production in parallel. Plucking beater go down interval and rotate with carriage to pluck cotton sequence. Cotton plucked is transported to the next machine via duct.
Disk plucker adopts a saw-toothed beaters ,which are divided into 3 groups,and fixed from inside. From inside to outside according to the tooth setting from thin to thick so as to get fibers minor and uniform,thus itâ??s advantageous to the blending and cleaning of next process.
â??
Technical Specifications
Production (kg/h): 800 - 1000 kg
Loading Capacity / Cotton Piling Weight in kg: 2000 Kg Each (Around 2 sets)
Outer Wall Diameter in mm: 4760 mm
Inner Wall Diameter in mm: 1300 mm
Speed of Carriage in r/min: 1.6 - 2.2 r/min
Beater Rotating Speed in r/min: 740 r/min
Knife out of Rib / Blade extension from grid in mm: 2.5 - 7.5 mm
Crab Slewing Speed in r/min: 0.59 - 2.96 r/min
Ground Rail External Diameter in mm: 5192 mm
Total Height in mm: 4155 mm
General Power in Kw: 4.17 Kw
Net weight in Kg: Around 1600 Kg
â??
Product Description
Reciprocating bale plucker is one of the first process of Blow room & carding Department. It is suitable for each kind of cotton, chemical & viscose fibre length less than 76mm. The pluck arm, mounted with two beaters, can lift and revolve 180 . The pluck arm is moved to and back to pluck fibre above bale. The fibre plucked are sucked into the front feeder by air current through transport duct for further process.
Technical Specifications
Beater Width: 1720 mm (Special) & 2300 mm (Normal)
Production Kg/h: 1000 Kg/h & 1500 Kg/h
Basic Pile Weight: 6000 Kg & 7500 kg
Length of Floor Space: Basic Type 22.03 m (8 Sections of Air ducts) can be Increased or Decreased by 2.5 m x n
Bales Arrangement Length: Basic Type 15.9 m (8 Sections of Air ducts) can be Increased or Decreased by 2.5 m x n
Intermittent Dropping of Beater: 0.5 ~ 10 mm/time Frequency Control Usually 1 ~ 3 mm/time
Calender Roller Dia.130 mm Both Sides; Middle 116 mm
Carriage Reciprocating Speed: 16.4 m/min (max); Generally 10 m/min
Installed Power: 8.6 Kw & 10.6 Kw
Overall size: 22030*5212*3082 & 22030*6648*3082
Net weight: 6000 Kg & 6500 Kg
Product Description
Mixing opener is suitable for all classes of raw cotton (usually for those with high maturity and higher class). These are placed in the front of the automatic plucker, and transmitted them to a small block brought by the automatic plucker raw cotton into the machine with the aid of Condenser add on (additional item), open and remove some impurities and dusts, then suck the raw cotton into the platform with its condenser.
Technical Specifications
Production Kg/h: 800 Kg/h
Width in mm: 1060
Trash extraction efficiency: Trash extraction 3.5/hour, usually about 30-35%
Spiked apron speed: 1, 1.25, 1.5, 1.75 m/min
Bales speed: 60x 70x 80 100 m/min
Press apron speed: 1x 1.25x 1.5x1.75 m/min
Evening roller diameter/rotating speed: 260mm\200r/min
Spike beater diameter/rotating speed: 400mm\400r/min
Knife beater diameter/rotating speed: 400mm\430r/min
Small hedgehog beater (1) diameter/rotating speed: 400mm\700;800;900r/min
Small hedgehog beater (2) diameter/rotating speed: 400mm\745;850;960r/min
Grid bars type/interval space: Flat steel grid bar spike knife double beater 12-22Small hedgehog beater (1) First group 12-22mm Second group 10-22mm Small hedgehog beater (2) 10-22mm
Spike, knife beater and grid bar: Entrance10-15mm Exit12-20mm
Hedgehog beater (1) and grid bar interval space: Entrance10-14mm Exit13-17mm
Hedgehog beater (2) and grid bar interval space: Entrance10-15mm Exit15-20mm
Press apron and spiked apron interval space: 60-80mm
Spiked apron and evening roller interval space: 40-80mm
Spiked apron and spike beater interval space: 5mm
Motor specification:
Rotating beater 6-4kw (left) 1430r/min
Rotating spiked apron 2-21-6 0.6kw 930r/min
Rotating Spiked apron 0-100 0.37kw 14r/min
Size (LxWxH) mm: 5358x1430x3696 including Condenser
Machine weight: 4200 Kg
Product Description
Multi Mixer is the mixing process of blow room. It is suitable for mixing cotton especially for synthetic fibers whose mixing evenness is highly demanded. As this Multi Mixer is equipped with a beater at the outlet, the mixed fiber can be further opened before feeding to next machine.
Technical Specifications
Capacity: 800 Kg/h
Number of trunks: 4-6
Air volume of conveying fan: 1.1 m3/s
Power: 10.85 Kw
Dimensions: 250 mm x 1600 mm x 4400 mm
Net weight: 4800 Kg
8763 Marine Equipment Machinery Suppliers
Short on time? Let Marine Equipment Machinery sellers contact you.
Product Description
Fine Opener is suitable for further opening and impurities removing of all classes of raw cotton, cotton chemical fiber and the middle to long chemical fibers shorter than 76mm. It mainly consists of cotton store and feeding construction that features strong opening and good effect of impurity removing.
Technical Specifications
Machine Type: TMI 60.5.1.200412a
Production: 800 Kg/h
Width: 1060 mm
Beater type: Hedgehog
Beater diameter mm: 610
Beater rotating speed r/mm: 480
Hopper roller diameter mm: 76
Hopper roller rotating speed r/mm: 35-39.45
Grate Bar Type: Triangle grid bar
Adjusting type: Hand wheel out of machine
General Power kw: 3.55
Size(LÃ??WÃ??H): 1810Ã??1650Ã??3875(including Condenser)
Machine weight: 1800
Machine Type: TMI 60.5.1.200412b
Production: 600 Kg/h
Width: 1060 mm
Beater type: Card wire roller
Beater diameter mm: 600
Beater rotating speed r/mm: 540
Hopper roller diameter mm: 76
Hopper roller rotating speed r/mm: 35-39.45
Grate Bar Type: Triangle grid bar
Adjusting type: Hand wheel out of machine
General Power kw: 3.55
Size(LÃ??WÃ??H): 1810Ã??1650Ã??3875(including Condenser)
Machine weight: 1800
Machine Type: TMI 60.5.1.200412c
Production: 600 Kg/h
Width: 1060 mm
Beater type: Sawblade
Beater diameter mm: 600
Beater rotating speed r/mm: 600
Hopper roller diameter mm: 76
Hopper roller rotating speed r/mm: 35-39.45
Grate Bar Type: Triangle grid bar
Adjusting type: Hand wheel out of machine
General Power kw: 3.55
Size(LxWxH): 1810x1650x3875(including Condenser)
Machine weight: 1800
Product Description
Chute feeder has a good effect on open & low fiber damages. Two feed rollers feed materials to prevent from warping. The feed rollers controlled by inverter. It is mounted with protection unit. The space between feed rollers and feed rollers/open roller is adjustable.
The vibrant favourable for forming even and uniformity fiber batt. The output roller draft for improving sliver evenness. The sliver evenness is improved.
Technical Specifications
Suitable fiber: All synthetic and mixed fibers which are less than 76mm
Working width (mm): 950
Production (kg/h): 100
Diameter of feed roller (mm): 120
Diameter of opening roller (mm): 266
Blower speed (rpm): 2840
Air displacement: 600m3/h -500pa
Installed power (Kw): 2.85
Overall dimension (Wx Lx H) (mm): 1614 x 600 x 2800
Net weight (kg): 1400â??
Product Description
The separator is used for cotton cleaning process and is directly installed in a conveying duct, which can detect and remove effectively the metal impurities and spark in textile fiber. It is an importance equipment for ensuring safety in production.
Technical Specifications
Power Source: AC220V 50HZ,60HZ
Sensitivity: Spark-1mm,visual angle no less than 90 metal-no less than 2mm steel ball
Response time: Millisecond level
Cotton speed range in conveying duct: 5-18m/sec
Dia. Of conveying duct: 300 mm
Product Description
Condenser is commonly used for the opening flow. Use blower and card pipe transmitting raw cotton or chemical fiber and the original cotton is condensed at the surface of dust cage with the suction of the blower and then stripped from it by beater, and go through the trash extraction of dust cage.
Rich specifications for selection. Different power for different position in the flow. There are bypass devices at the top of this condenser and the raw cotton can be straightly transmitted to the next platform through this path.
Technical Specifications
Production kg/h: 800
Dust cage diameter mm: 500
Beater type: 6-Wing
Blower diameter mm: 500
Blowing rate: Around 4500
General Power Kw: 4
Size (LxWxH) mm: 1721x800x1000
Machine weight kg: 600
Product Description
Dust Collector innovative concept is about filtering media which is placed on the two sides of filtering groove, and suction nozzles mounted on the suction arms which are then driven by patented mechanism revolves for intermittent dust collection.
Its convincing advantages: compact, reliable, efficient & economical.
â??
Working principle: Electrical unit consisted of the first-stage disc pre-filter and the second stage multiple round cage dust-filter. The first stage filter is used to extract, separate, collect the fibrous dust in the processing air; The second stage filter is used to filter out the fine dust from the air exhausted from the first stage filter.
At Tex Mach International, we provide our customers with a wide range of New & Used Solar Energy Systems & Components. As you know very well, the solar panel business is growing rapidly around the world and we are very excited to be in contact with you. Our Panels, Inverters, Batteries, Racking & other components are all collected from around the globe. Which means, they are the panels distributed in by manufacturers, distributors, wholesalers & end users in new & used quality. Please be noted that our stock rate of turnover changes very drastically as we have big buyers all the time.
For Used Solar Components, we do not attach any WARRANTY to our products, as we do not purchase directly from the solar manufacturing companies. Our prices are is in Ex-Works. They are not in FOB nor CIF/ CNF. Shipping charges will be added on top of these component prices.
