Find Verified Marine Engines Suppliers, Manufacturers and Wholesalers

Marine Engines are specially designed propulsion and power-generation engines used in boats, ships, yachts, fishing vessels, ferries, offshore platforms, and other marine applications. Built to withstand harsh saltwater environments and continuous operation, marine engines deliver reliable performance, fuel efficiency, and durability even under demanding sea conditions.
Key Specifications
Product Type: Marine Propulsion and Auxiliary Engines
Fuel Type: Diesel, Gasoline, Natural Gas
Power Output: 10 HP to 10,000+ HP
Engine Configuration: Inline, V-Type, and Opposed Cylinder Designs
Number of Cylinders: 2 to 20 Cylinders
Cooling System: Freshwater-Cooled, Seawater-Cooled, or Heat Exchanger Systems
Aspiration: Naturally Aspirated, Turbocharged, and Aftercooled
Starting System: Electric or Hydraulic Start
Control System: Mechanical or Electronic Engine Management
Applications: Commercial Ships, Fishing Boats, Ferries, Tugboats, Yachts, Offshore Vessels, and Naval Craft
Compliance: IMO, EPA Marine, and International Emission Standards

The Mercury Verado 250 is a high-performance outboard motor known for its power and reliability. Here are some key specifications:
Engine Type: 4.6L V8
Horsepower: 250 hp
Steering: Digital Throttle & Shift (DTS)
Starter: Electric
Shaft Length: Available in 25" (X-Long) and 30" (XX-Long)
Power Trim & Tilt: Yes
Fuel System: Electronic Fuel Injection (EFI)
Alternator: 115-amp
Weight: Approximately 600 lbs (272 kg)
Cooling System: Water-cooled with thermostat & pressure-controlled
The Verado 250 also features the Advanced MidSection (AMS) for reduced vibration and noise, and Adaptive Speed Control (ASC) for maintaining engine RPM despite changes in load or conditions12.

High-performance marine engines designed to deliver reliable propulsion, fuel efficiency, and dependable operation for commercial and industrial vessels.

Shaft length : S: 381mm (15") | L: 508mm (20")
Starting system : Manual
Weight : S: 24kg | L: 25kg
Engine type : OHV
Fuel delivery system : Carburetor
No. of cylinders : 1
Displacement : 138cm3
Bore x Stroke : 60.4mm x 48mm
Maximum output : 4.4kW
Full throttle operating range : 4,750 - 5,750rpm
Steering : Tiller
Oil pan capacity : 0.7 litres

Ignition system : Digital CDI
Alternator : 12V 5A (optional)
Engine mounting : Bushing type
Trim method : Manual trim & tilt
Gear ratio : 1.92:1
Gear shift : F-N-R
Exhaust : Above prop hub exhaust
Propeller selection (pitch) : 6 - 7" (Alloy)
Fuel tank capacity : Integral 1L (remote connection)
Fuel : minimum 91 (RON) octane

DF 15 HP :- 4-stroke
Shaft length : S: 381mm (15")| L: 508 mm (20")
Starting system : Electric or manual
Weight : MS: 44.0kg | ML: 45.0kg | ES: 48.0kg | EL: 49.0kg | PTL: 55.5kg
Engine type : OHC 4-valve
Fuel delivery system : Electronic fuel injection
No. of cylinders : In-line 2
Displacement : 327cm3
Bore x Stroke : 60.4mm x 57mm
Maximum output : 11.0kW
Full throttle operating range : 5,000 - 6,000rpm
Steering : Remote | Tiller
Oil pan capacity : 1.0 litre

Ignition system : Digital CDI
Alternator : E: 12V 12A | M: 12V 6A (op.)
Engine mounting : Shear mount
Trim method : Manual trim & tilt | Power tilt
Gear ratio : 2.08:1
Gear shift : F-N-R
Exhaust : Through prop hub exhaust
Propeller selection (pitch) : 7"- 12" (Alloy)
Fuel tank capacity : Separate 12L
Fuel ; minimum 91 (RON) octane

DF 20 HP:- 4-stroke
Shaft length : S: 381mm (15") | L: 508 mm (20")
Starting system : Electric or manual
Weight : MS: 44kg | ML: 45kg | ES: 48kg | EL: 49kg | PTS: 52.5kg | PTL: 54.5kg | PTH: 55.5kg
Engine type : OHC 4-valve
Fuel delivery system : Electronic fuel injection
No. of cylinders : In-line 2
Displacement : 327cm3
Bore x Stroke : 60.4mm x 57mm
Maximum output : 14.7 kW
Full throttle operating range : 5,300 - 6,300rpm
Steering : Remote | Tiller
Oil pan capacity : 1.5 litres

Ignition system : Digital CDI
Alternator : E: 12V 12A | M: 12V 6A (op.)
Engine mounting : Shear mount
Trim method : Manual trim & tilt | Power tilt
Gear ratio : 2.08:1
Gear shift : F-N-R
Exhaust : Through prop hub exhaust
Propeller selection (pitch) : 7"- 12" (Alloy)
Fuel tank capacity : Separate 12L
Fuel : minimum 91 (RON) octane

DF 25 HP:- 4-stroke
Recommended Transom Height (inches) : S:15" L:20"
Starting System : Manual S /Electric S and L
Weight LBS : Manual S: 136.6 / Electric S: 143 - Electric, Tiller, Power Trim and Tilt L: 163
Engine Type : SOHC 4-Valve
Fuel Delivery System : Suzuki Battery-less Electronic Fuel Injection with Lean Burn Control
No. Of Cylinders : 3
Piston Displacement inches (cc) : 29.8 (489)
Bore X Stroke Inches (mm) : 2.80 x 2.68 ()
Maximum Output HP : 25
Operating Range (RPM : 5000 - 6000
Steering : Tiller/Remote
Choke : N/A - Suzuki Electronic Fuel Injection
Oil Pan Capacity quarts (liter) : 1.6 (1.5)

New and used outboard marine engines,
All makers - Yamaha, Honda, Suzuki, Yanmar etc.,
Power: from 6 to 200 horse powers,
Transmission length: from Small to Long,
Low prices,
All are checked and very good condition.

YAMAHA OUTBOARD ENGINES
HS Code 840820
PRICE = US$2,000/PIECE CIF
ORIGIN: THAILAND
PACKAGE: TONS
MIN ORDER:5 PIECES
DESCRIPTION
As well as its indestructible (almost) composite shaft, the great little M18 outboard is tough in every other sense too - from its hard-working, permanent magnet 12-Volt motor and its hardwearing, weed-resistant power propeller right down as far as its hard-to-damage casing. In short, it goes where you go. With no drama.

Electric-Drive Technical specs
Amp Draw 42
Voltage 12
Mount Feature Lever lock
Max Thrust (kg) 18.2
Speeds (FWD/REV) 5 FWD/3 REV
Digital Maximizer False
Shaft Length 914 mm
Battery Meter False
Control Telescoping Tiller

 

Turbo Diesel Marine Engine Parts

ECS Panel is the major product of HOHYUN, which controls ME (electronic control type) engine.Once the fuel oil system of marine engine is charged from the mechanical type to electronic control type, this is an integration until for electric control of engine.

2 Stroke 30Hp Long Shaft Outboard Engine Boat Motor
30 HP outboard motor displacement is smaller, it easier for maintenance, will give you performance and reliability for your long days of boating. In many countries (especially for the developing areas) of the world where outboard demand is primarily for commercial uses, the water quality, weather and climate variance and long hours of continuous use make for a very harsh use environment. This is the two stroke outboard motor series developed mainly for commercial use such as on fishing and passenger vessels. This series suits harsh conditions that include everyday use and situations involving long hours of continuous operation. Enhanced strength and durability in locations such as roller bearings, crankshaft and cylinder block, as well as an improved water pump that ensures plenty of cooling effect, combine to deliver substantial improvements in durability and reliability.

Product Grade :
Marine Fuel / Marine Gas Oil (MGO)

Product Detailed Description

Marine Fuel is a petroleum-based fuel used for marine engines, vessels, generators, and onboard power systems. It is suitable for commercial shipping, cargo vessels, offshore operations, and other marine applications, subject to the required fuel grade and applicable maritime fuel regulations. Available for international B2B supply in bulk quantities, subject to product availability, agreed specifications, inspection, and delivery requirements.

As per confirmed order and product availability

Oman (only if this is the actual country of origin)

Product Standards

ISO 8217 / Applicable Marine Fuel Specification



Key Specifications 1

Fuel Grade: Marine Fuel / Marine Gas Oil (MGO)

Key Specifications 2

Sulfur Content, viscosity, density, flash point, water content, and other parameters according to the agreed marine fuel specification.

Key Specifications 3

Designed for use in marine diesel engines, auxiliary engines, generators, and onboard power systems.

Key Specifications 4

Suitable for cargo vessels, commercial ships, offshore vessels, marine transportation, and other compatible marine applications.

Key Advantage 1

Suitable for a wide range of commercial marine and shipping applications.

Key Advantage 2

Available according to the required marine fuel specification and vessel requirements.

Key Advantage 3

Fuel quality can be verified through agreed specifications, laboratory testing, and independent inspection where required.

Key Advantage 4

Bulk supply and delivery arrangements can be coordinated according to vessel requirements, quantity, port, inspection, and shipping terms.

Engine Oils are high-performance lubricants specially formulated to protect, clean, and enhance the performance of internal combustion engines. They create a protective film between moving engine components, reducing friction, wear, and heat generation while helping to prevent corrosion and deposit buildup.
Key Specifications
Product Type: Engine Lubricating Oil
Base Oil Type: Mineral, Semi-Synthetic, Fully Synthetic
Viscosity Grades: SAE 0W-20, 5W-30, 10W-40, 15W-40, 20W-50, and others
Standards: API, ACEA, JASO, OEM Specifications
Applications: Automotive, Commercial Vehicles, Industrial Equipment, Generators, Marine Engines
Operating Temperature Range: Suitable for low and high-temperature conditions
Compatibility: Gasoline, Diesel, Turbocharged, and Heavy-Duty Engines
Additives: Anti-wear, Anti-oxidation, Detergent, Dispersant, and Corrosion Inhibitors

Caterpillar Engines are high-performance diesel and natural gas engines engineered to deliver exceptional power, durability, and efficiency across a wide range of industrial applications
Key Specifications
Brand: Caterpillar (CAT)
Product Type: Diesel and Natural Gas Engines
Power Range: 25 HP to 8,000+ HP
Engine Configuration: Inline and V-Type Cylinders
Number of Cylinders: 3, 4, 6, 8, 12, 16, and 20 Cylinders
Displacement Range: 1.1L to 106L+
Cooling System: Water-Cooled
Fuel System: Electronic Fuel Injection / Mechanical Injection
Aspiration: Naturally Aspirated, Turbocharged, and Aftercooled
Emission Compliance: EPA, EU Stage, and other international standards
Applications: Construction, Mining, Marine, Power Generation, Agriculture, Oil & Gas, and Industrial Equipment

Cummins Engines are globally recognized for their exceptional reliability, durability, and performance across a wide range of industrial, commercial, marine, agricultural, mining, and power generation applications. Engineered with advanced technology and precision manufacturing, Cummins engines deliver outstanding power output, fuel efficiency, and operational dependability even in the most demanding environments.
Key Specifications
Engine Type: Diesel, Natural Gas, and Alternative Fuel Engines
Configuration: Inline 4-cylinder, 6-cylinder, and V-type engines
Power Range: 49 HP to 4,400 HP (depending on model)
Displacement: 2.8L to 95L+
Aspiration: Naturally Aspirated, Turbocharged, or Turbocharged Aftercooled
Cooling System: Water-cooled
Fuel System: Electronic or Mechanical Fuel Injection
Emission Standards: EPA, Euro, Tier, and IMO compliant models available
Speed Range: 1,500 RPM to 2,100 RPM and higher
Starting System: Electric Start
Applications: Generators, Trucks, Buses, Construction Equipment, Marine Vessels, Mining Equipment, Agricultural Machinery, and Industrial Systems
Control System: Electronic Engine Management (selected models)

The Yamaha 9.9 HP 2-stroke outboard engine is a compact and reliable boat motor commonly used on small fishing boats, dinghies, and inflatable boats. The Enduro-type models are popular in many countries because they are lightweight, simple to repair, and powerful for their size

The Yamaha F60 Outboard Motor is a 60 horsepower 4-stroke marine engine designed for small-to-medium fishing boats, patrol boats, and leisure craft. It is known for fuel efficiency, reliability, and quiet operation

The Yamaha F115 Outboard Motor is a popular 115 horsepower 4-stroke marine engine made by Yamaha Motor Company. It is designed for medium-size boats such as fishing boats, speed boats, and small commercial vessels

Product Grade: CST 360 Marine / Industrial Fuel Oil

Minimum Price (USD):
Price on Request

Maximum Price (USD):
Price on Request

Price Units:
Metric Ton / Barrel

Incoterms:
FOB / CIF / CFR

Product Detailed Description:
CST 360 is a heavy fuel oil commonly used in marine engines, industrial boilers, power plants, and large-scale heating applications. It is suitable for industries requiring high-energy fuel for continuous operations and heavy-duty performance. Atlantic Energies supplies CST 360 through reliable supplier networks to meet bulk fuel requirements of marine, industrial, and energy-sector buyers worldwide.

Minimum Order Qty:
As per buyer requirement / Bulk order basis

Units:
Metric Ton / Barrel

Packaging Details:
Supplied in bulk through tanker vessel, tank truck, storage terminal, or as per agreed delivery terms.

Production Capacity:
As per supplier availability

Country Where Product Is Manufactured:
As per supplier origin / Contract terms

Sample Available:
Yes

Sample Cost Born By:
Buyer

Seller Product Code:
AE-CST-360

Product Standards:
International Marine Fuel Oil Standards / Contract Specifications

Brand:
Atlantic Energies

Model No.:
CST-360

HS Code:
271019 / 27101951

Key Specifications

Key Specifications 1:
Heavy fuel oil with 360 CST viscosity grade suitable for marine and industrial fuel applications.

Key Specifications 2:
Used in marine engines, industrial boilers, power plants, heating systems, and heavy-duty fuel operations.

Key Specifications 3:
Supplied according to agreed contract specifications, quality inspection, and buyer requirements.

Key Specifications 4:
Available for bulk supply with FOB, CIF, or CFR delivery terms depending on destination and quantity.

Key Advantages

Key Advantage 1:
High-energy fuel suitable for continuous marine, industrial, and power generation operations.

Key Advantage 2:
Reliable and economical fuel option for large-scale heavy-duty applications.

Key Advantage 3:
Quality inspection and product documentation can be arranged as per contract terms.

Key Advantage 4:
Flexible supply quantity, shipment terms, and destination-based delivery coordination available.

The Yamaha Enduro 40HP 2Stroke Outboard Engine is a durable marine engine designed mainly for fishing boats, workboats, and small transport vessels. The Enduro series from Yamaha Motor Company is known for simple design, high durability, and ability to run for long hours in tough marine conditions