Find Verified Silicon Tubes Suppliers, Manufacturers and Wholesalers

39Fr Gastric Tube customized design. Design input from more than 3 Upper-GI surgeons. Soft silicone enables easy manipulation while in the stomach. FOB Malaysia.

Model:
SN-501 100% RTV Neutral Silicone Sealant

Description :
SN-501 is a one-part high performance 100% RTV Neutral Silicone Sealant. It is suitable for a wide range of sealing and glazing applications where durability and reliability is required. It has superior resistant to UV-Radiation, vibration and weathering. etc.It adheres to a variety of non-porous substrates such as glass, ceramic, tiles, aluminum, fiberglass, no-oily wood, polycarbonate, etc.

Printing Parameters

Squeege: 60-65 SHORE
Mesh: 120/inch
Tension: 25 N/cm2
Clean Up: Water
Strokes: 3
Rounds: 2

Printing Application

1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 -4 hours ambient drying.
3. Heat cure at 130- 160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.

Formulation
White Print
White: 97%
Fixer: 3%
Colour Print
White: 15-20%
Clear: 70-75%
Colour Pigment: 5-7%
Fixer: 3%

Printing Parameters

Squeege: 60-65 SHORE
Mesh: 120/inch
Tension:� 25 N/cm2
Clean Up: Water
Strokes: 3
Rounds: 2

Printing Application

1. Blow dry print in between rounds using hairdyer or other methods.
2. Allow for 2 - 4 hours ambient drying.
3. Heat cure at 130 -160oC for 2 minutes.
4. Allow for 24 hours after heat cure before any physical testing of prints.

Formulation
White Print
White: 97%
Fixer: 3%
Colour Print
White: 15-20%
Clear: 70-75%
Colour Pigment: 5-7%
Fixer: 3%

Aluminum Ingot A7 generally refers to primary aluminum ingot of high commercial purity, commonly traded for industrial remelting and manufacturing .

Silicon (Si) : 0.20%
Iron (Fe) : 0.20%
Copper (Cu) : 0.10%
Zinc (Zn) : 0.10%
Manganese (Mn) : 0.05%
Magnesium (Mg) : 0.05%
Other impurities : Controlled
Appearance : Silver/metallic
Form : Cast ingot
Surface : Clean, free from excessive oxidation/contamination
Packaging : Bundled/palletized

SG-LOK Instrument Fittings (Double Ferrule Tube Fittings) SS316
SG-LOK Instrument Fittings are high-quality double ferrule compression tube fittings manufactured from premium SS316 stainless steel. Designed to provide leak-tight, vibration-resistant connections, they are widely used in instrumentation, process control, hydraulic, pneumatic, and high-pressure fluid systems.

Our fittings are engineered for excellent corrosion resistance, high pressure performance, and easy installation, making them suitable for demanding industrial environments.

Features:
Premium SS316 stainless steel construction
Double ferrule design for leak-free sealing
Excellent corrosion and high-temperature resistance
High pressure capability
Easy installation and reassembly
Precision machined for reliable performance
Interchangeable with major international brands

Available Products:
Tube Union
Male Connector
Female Connector
Elbow Union
Tee Union
Bulkhead Union
Tube Cap
Plug
Reducer
Adapter
Needle Valve
Ball Valve
Check Valve
Manifold Valve

Applications:
Oil & Gas
Petrochemical Plants
Chemical Processing
Semiconductor Industry
Pharmaceutical Industry
Food & Beverage
Water Treatment
Power Generation
Marine & Offshore
Instrumentation & Process Control Systems

Wholesale Heavy Duty Pallet Bag LDPE/HDPE Reusable Protective Pallet Top Cover Waterproof Hood Bag

Application : Pallet packaging of ceramics, medicine, metal, furniture, machinery, hardware parts

Product Specification : Material
HDPE, LDPE, LLDPE, PE material. Biodegradable/Recyclable material available, other additives such as Metallocene
Width : HDPE: 150 - 1650MM
LDPE: 75 - 3250MM
PP: 45 - 740MM OR CUSTOMIZED
Thickness : 8 - 350 Micron
Capacity : 5 Litre - 240 Litre / Customized
Product Colour : Customized
Design Printing : Up to 8 colors, provide design (with fee)
Style : Star-Seal Bottom, Flat Seal Bottom, Tie Handle, Tie Top, Singlet Bag, Blocked-bag, C-Folded, Gusseted, Blocked Head, Top Seal, Perforation, Punched hole
Plastic Tubing: Layflat Tubing, Gusseted Tubing, Sheet in Roll/Single Wound Sheet, Double Wound Sheet
Packaging : On roll, Flat-packed, In box, Loose packed, Folded, Carton, PE/PP outer bag, Dispenser or Customized

Black Silicon Carbide  is widely used as a blasting medium and abrasive.

Our Silicon Carbide is hard, extremely resistant and able to withstand the

strongest alkalis and acids. It is widely used in abrasive tools, grinding

and polishing, refractory materials, high end ceramics etc. It also has

above 99% Al2O3 content, coarse particles, good self-sharpening and

good abrasion resistance.

Green Silicon Carbide� is widely used for Abrasive Tools and Sandblasting.

Our Silicon Carbide is hard with good abrasive ability and is ideal for

abrasive blasting and polishing. It is widely used in abrasive tools,

grinding and polishing etc. It also has above 99% Al2O3 content, coarse

particles, good self-sharpening and good abrasion resistance.

Model:
Tremco Spectrem 2

Description :
Tremco Spectrem 2 is a medium-modulus, one-part, high-performance, neutral-cure silicone sealant, ideal for a variety of perimeter caulking and glazing applications. Tremco Spectrem 2 is suitable for both caulking and glazing applications, including cap beads, toe beads, heel beads and other typical air seals. It is particularly appropriate as a weather seal and tensile bead in two-sided structural glazing system and ideal for sealing joints within the curtain wall or window systems. Tremco Spectrem 2 may be used as a weather seal for materials such as aluminum, glass, steel, painted metal, plastic, stone, concrete and brick. Tremco Spectrem 2 exhibits primerless adhesion to many common building materials.

Description :
PS-202 PVC Pipe Cement Heavy Duty is a premium grade, high viscosity and clear color adhesive for PVC articles bonding applications. It is an easy-to-apply, fast setting and extra strength formulation. Suitable for waterproof bonding and coupling of rigid PVC, uPVC, cPVC and ABS pipes and fittings, cable conduits, gutters, sewer, drain, waste and vent systems, turf, irrigation and pressure pipe applications. It is safe for drinking water pipes upon complete curing.

Model:
PS-202 PVC Pipe Cement Heavy Duty

Model:
Super Glue

Description :
Super Glue is a colorless, strong, easy to use instant adhesive that bonds well both porous and non porous materials. Use for bonding of glass, plastic, metal leather concrete, fabric, etc.

Description :
4 Minutes Steel Epoxy is a steel filled fast setting, non shrinking gray colour epoxy adhesive. It offers good gap-filling capabilities and slumping characteristics. It will chemically bond steel, brass, copper, bronze, iron, plastic, wood, concrete and ceramics. Withstands high temperatures and is pressure resistant. Use to repair: worn valve seats, cracked housings, coppers and cylinder heads, gas tank leaks, radiator leaks, torn keyways, stripped threads, worn pulleys, loose screws, etc.

Description :
Plus Series Silver+ RTV gasket maker is specially formulated one part silicone compound that cures to form a “formed-in-place rubber seal for mechanical assemblies. it offers excellent toughness, heat resistant and able to sustain thermal cycling without shrinking or cracking.

Model:
Awning & Roofing Caulk / MC-201 Metal Roofing Sealant

Description :
Awning & Roofing Caulk / MC-201 Metal Roofing Sealant is a one-part skinning oil-based sealant that offers excellent adhesion and outstanding durability. For general sealing in roofing, external walls, etc.

Model:
MS-601 MS Polymer Adhesive / Sealant

Description :
MS-601 is based upon Hybrid Silyl Modified Polyether Technology. It is suitable in wide range of industrial applications and it has excellent primerless adhesion to various types of substrates of dissimilar porosity, and surface textures. It also can be over painted with most of the types of paints. It is a technology that combines the unique features of Silicone and Polyurethane Sealants. It is a moisture cure system adhesive sealant and “NON” bubbling when apply in high humidity or to moist substrates. It is not suitable for structural glazing.

Product Specification

Product Name: Primary Aluminum Ingot A7
Origin: Kazakhstan
Grade: A7
Purity: Minimum 99.70% Aluminum

Chemical Composition (Typical)
Aluminum (Al): 99.70%
Silicon (Si): 0.10 - 0.15%
Iron (Fe): 0.16 -0.20%
Copper (Cu): 0.01%
Zinc (Zn): 0.03 - 0.04%
Magnesium (Mg): 0.02%
Other impurities: 0.30% total

Tyre Scrap

German Technology Based Malaysian Latex Condoms

German Technology Based Malaysian Latex Condoms