Find Verified Bronze Alloy Suppliers, Manufacturers and Wholesalers

Magnesium (Alloy, Anodes, Extrusion, Rolling, Primary)
High purity magnesium, Magnesium ingot, Alloy chip, Alloy ingot, direct Chil cast Magnesium Billet, Magnesium-Rare Earth alloy, Magnesium-Lithium alloy, Extruded Anode, Casting Anode, packaged anode, Extruded Profile, Extruded Plate/Sheet, Extruded Rod/Bar, Extruded Tube, Extruded Wire, Extruded Formwork, Rolled Plate/Sheet, Rolled Strips, Die Casting, Dolomite.

A copper ingot is a purified, solid rectangular block of copper, typically weighing 25-35 kg, produced by casting molten copper into molds for easy transport, storage, and industrial processing. Due to high electrical/thermal conductivity and corrosion resistance, they are primarily used to manufacture copper wire, pipes, alloys, coins, and construction materials.

We also Offer
Copper Powder
Copper Plate

Please note: for price quotation, send us a message.

Thank you

ZINC plays an important role in continuous hot-dip galvanizing. Using the correctly specified grade of ZINC, continuous galvanizing grade (CGG) alloy, or master alloy is key to producing a galvanized product.

ZINC Coatings on Steel
One of the biggest uses of ZINC is in making protective coatings for steel. The development of the wide range of ZINC coatings arose from two happy accidents of chemistry, the relatively slow and predictable rate of atmospheric corrosion of ZINC compared with steel, and the relative positions of ZINC and iron in the electrochemical series.

ZINC will corrode preferentially to give cathodic protection to iron when both are in contact in an aqueous medium. This is used to good effect to protect immersed structures such as ships’ hulls, drilling rigs and pipelines. It also means that any bare areas in a ZINC coating on steel, caused by damage or operations such as cutting or drilling, are still protected by the surrounding ZINC.

Other ZINC Coatings
Originally, ZINC coatings were applied by hot dip galvanizing. This involves dipping prepared steel in molten ZINC. This was done mainly with fabricated steel or with sheets of steel, many of which were profiled to produce the ubiquitous ‘corrugated iron’. The first development from this was the production of continuous strip steel with a galvanized coating. Refinements of this process today account for the greatest part of the total tonnage of steel carrying ZINC coatings.

Standard Specification for ZINC
Specifies the chemical requirements and other delivery conditions for 5 ZINC grades, including Special High Grade (SHG), High Grade (HG), and Prime Western Grade (PW). These grades, and scores of nonstandard variations of them, were once all that were available for use by the continuous galvanizing industry. Some are still employed in certain instances, e.g., SHG (99.990% Zn) is used to reduce the aluminum content in coating line zinc baths. The grades in this standard are also used in the general galvanizing and ZINC die-casting industries.

ZINC INGOTS
Application
Mainly used for die-casting alloy battery industry.
Widely used in Painting / Printing / Dyeing / pharmaceutical / rubber industry etc
Chemical industries, ZINC and other metal alloy plating coating industry.
In ZINC plating, manufacture of brass, manganese bronze, galvanized iron, dry battery; as catalyst and reducing agent.

Specifications
ZINC Ingot 99.995 High quality special high grade ZINC Ingots
Zn (purity): 98.7%-99.995%
Durability
Resistant to abrasion
Corrosion free
Impact resistance

Description :
4 Minutes Steel Epoxy is a steel filled fast setting, non shrinking gray colour epoxy adhesive. It offers good gap-filling capabilities and slumping characteristics. It will chemically bond steel, brass, copper, bronze, iron, plastic, wood, concrete and ceramics. Withstands high temperatures and is pressure resistant. Use to repair: worn valve seats, cracked housings, coppers and cylinder heads, gas tank leaks, radiator leaks, torn keyways, stripped threads, worn pulleys, loose screws, etc.

Bronze membership can overriding 3 levels & and b+ sales can get return of investment about usd 720 in 17 batch.

Zircon is the natural form of Zirconium Silicate. Zircon is used to produce zirconium metal and zirconium dioxide. Zircon sand has a low expansion coefficient and is very stable at high temperatures. It is used as a refractory material in many foundry and casting applications. One of its most common uses is in the production of ceramics. � Zirconium is used in a variety of metal products that require a resistance to heat and corrosion. It is used to make high-performance alloys, specialty steel, lamp filaments, explosive primers, computer equipment and many electronics components.

Ilmenite is a primary ore of Titanium and a key source for Titanium oxide which is an important pigment, whiting, and polishing abrasive. Ilmenite is a black mineral with a submetallic to metallic luster. Titanium alloys are used for making high-performance parts and tools like aircraft parts, artificial joints for humans, and sporting equipment such as bicycle frames. Ilmenite is also used to produce synthetic rutile. Titanium dioxide pigments roduce a white color and brightness in paint, paper, adhesives, plastics, toothpaste, and even food. Titanium oxide abrasives are used in many other industries.

Spec.: As shown on the image
Material: 2.5mm Aluminium plate 1060
Size : 760(L) X 320(W) X 190(H)mm
MOQ : 5 units


1) The toolbox is made of different series of aluminium alloy materials
( 1060 series , 5052 series ) according to customer's requirement instead of standard
ones
2) The toolbox is normally for truck , trailer and pickup vehicles
3) The toolbox is waterproof and anti-dust as we use rubber sealing on the
opening lid
4) The surface can be processed to meet customer's different color requirements ,
dimensions can be customized
Cost will be adjusted according to aluminium material

Spec.: As shown on the image
Material: 2.5mm Aluminium plate 5052
Size : 1800(L) X 1800(W) X 860(H)mm
MOQ : 5 units


1) The toolbox is made of different series of aluminium alloy materials
( 1060 series , 5052 series ) according to customer's requirement instead of standard
ones
2) The toolbox is normally for truck , trailer and pickup vehicles
3) The toolbox is waterproof and anti-dust as we use rubber sealing on the
opening lid
4) The surface can be processed to meet customer's different color requirements ,
dimensions can be customized
Cost will be adjusted according to aluminium material

Spec.: As shown on the image
Material: 2.5mm Aluminium plate 1060
Size : 1400(L) X 400(W) X 400(H)mm
MOQ : 5 units


1) The toolbox is made of different series of aluminium alloy materials
( 1060 series , 5052 series ) according to customer's requirement instead of standard
ones
2) The toolbox is normally for truck , trailer and pickup vehicles
3) The toolbox is waterproof and anti-dust as we use rubber sealing on the
opening lid
4) The surface can be processed to meet customer's different color requirements ,
dimensions can be customized
Cost will be adjusted according to aluminium material

Spec.: As shown on the image
Material: 2.5mm Aluminium plate 1060
Size : 1320(L) X 490(W) X 480(H)mm
MOQ : 5 units


1) The toolbox is made of different series of aluminium alloy materials
( 1060 series , 5052 series ) according to customer's requirement instead of standard
ones
2) The toolbox is normally for truck , trailer and pickup vehicles
3) The toolbox is waterproof and anti-dust as we use rubber sealing on the
opening lid
4) The surface can be processed to meet customer's different color requirements ,
dimensions can be customized
Cost will be adjusted according to aluminium material

Spec.: As shown on the image
Material: 2.5mm Aluminium plate 1060
Size : 1430(L) X 550(W) X 820(H)mm
MOQ : 5 units

1) The toolbox is made of different series of aluminium alloy materials
( 1060 series , 5052 series ) according to customer's requirement instead of standard
ones
2) The toolbox is normally for truck , trailer and pickup vehicles
3) The toolbox is waterproof and anti-dust as we use rubber sealing on the
opening lid
4) The surface can be processed to meet customer's different color requirements ,
dimensions can be customized
Cost will be adjusted according to aluminium material

Spec.: As shown on the image
Material: 2.0mm Aluminium plate 1060
Size : 1250(L) X 500(W) X 500(H)mm
MOQ : 5 units

1) The toolbox is made of different series of aluminium alloy materials
( 1060 series , 5052 series ) according to customer's requirement instead of standard
ones
2) The toolbox is normally for truck , trailer and pickup vehicles
3) The toolbox is waterproof and anti-dust as we use rubber sealing on the
opening lid
4) The surface can be processed to meet customer's different color requirements ,
dimensions can be customized
Cost will be adjusted according to aluminium material

1) Aluminium Ingots

SPECIFICATION: Various shape & Grades. Purity 96% - 99.7%
Aluminium Alloy Ingots (ADC12, AC4, AC2B, LM6, LM24)

2) Zinc Ingots

SPECIFICATION: Purity +/- 95% .Highly durable and good conductor of electricity.

3) Lead Ingots

SPECIFICATION: Purity +/- 99.94 to 99.99%.


QUANTITY:
A: Trial order: 1 container
B: Contract: Upon trial shipment (Monthly up to 10,000 MT with 11 Months contract)

INSPECTION: SGS or equivalent inspection for Quality and Quantity of the commodity at loading place.

PAYMENT TERMS: 100% LC or SBLC

INCOTERMS: FOB/ CIF / CFR / Cash & Carry
DESTINATION PORT: Upon Buyer's interest (ASWP)

R.C.S. Manufacturing Sdn. Bhd. uses selected silica sand coating with phenolic resin to produce high grade Resin Coated Sand by using Hot Mixing Method, which contains 0.8% to 4% of Resin, with an AFS number ranging from AFS 40 to AFS 90. The bending strength of the product ranges from 12kg/cm�² to 150kg/cm�². Each and every resin coated sand formulation can be customized so you can optimize your operation\'s unique capabilities.
Resin coated sand can produce the shell core and shell mould for the following parts:

1) Automobile and motorcycle engine parts
2) Aluminium alloy casting
3) Grey iron casting
4) Brass and copper casting
5) Stainless steel casting

Ecominim Glass and Multi Surface Cleaner - Skye Fresh

Formulated without any harsh or corrosive ingredients, this alcohol-free cleaner can be used on multiple surfaces including stainless steel, aluminum, wood, porcelain, and tiles.

Scent: Skye Fresh
Volume: 500ML
Price: RM 16.90
Country of origin: Malaysia
Minimum Order Size: 1 tonne
Packaging details: Recyclable carton

Efficacy
Especially effective on stubborn water stains, grease, dust, and soap scum. Non-corrosive on aluminum and alloy.

Product characteristics
- Low suds
- Gentle enough for sensitive skin
- Derived from plant-based, biodegradable ingredients.

- Contains citric acid, a natural preservative commonly found in food
- No dyes, coloring, parabens, phosphates, or phthalates.
- Uses BPA-free reusable plastics

Directions
Spray on dry surfaces and wipe with a dry lint-free cloth or old newspaper.
EcoMINIM eco tip
For best results wipe mirrors and glass surfaces with old newspapers. For stubborn stains, spray, leave on for a few minutes and scrub or wipe with a damp cloth.

Ingredients
decyl glucoside (plant-based, non-ionic surfactants), water, citric acid (natural preservative), glycerine and sodium citrate (Plant-based chelating agent); perfume, no colouring

* In the field of constructions, steel acts as a powerful structure, which creates a high strength, durability and stability. Steel is an alloy of iron and carbon and sometimes other elements. It is a low cost and a significant component used in buildings, infrastructures, tools, machines, appliances, etc.

* Steel being the most preferred choice for construction has great benefits. The buildings are made up of different types of steel, which forms a structural framing system, saves time and less expensive

* Steel reinforcement bars or rebars are used to improve the tensile strength of the concrete.

* Steel is only used as rebar because elongation of steel due to high temperatures (thermal expansion coefficient) nearly equals to that of concrete

Types of Steel Reinforcement Bars
* Major types of steel bars used in the construction

I.Mild Steel Bar
* The surface of the mild steel bars are plain and round in shape. They are available in various sizes of 6 mm to 50 mm. They are used in concrete for special purposes, such as dowels at expansion joints, where bars must slide in a metal or paper sleeve, for contraction joints in roads and runways, and for column spirals. They are easy to cut and bend without damage.

Grades in mild steel bars
1. Mild Steel Bars
Mild steel bars grade-I designated as Fe 410-S or Grade 60.

Mild steel bars grade-II designated as Fe-410-o or Grade 40.

2. Medium Tensile Steel Bars designated as Fe- 540-w-ht or Grade 75.
II.Deformed Steel Bar
Deformed steel bars have ribs, lugs and indentation on the surface of the bar, which reduces the major problem that is faced by mild steel bar due to slippage and good bonding is achieved between concrete and rebar. The tensile properties is higher compared to other rebars. These bars are produced in sections from 6 mm to 50 mm dia.

1. TMT Bars (Thermo Mechanically Treated Bars)
Thermo Mechanically Treated Bars are hot treated bars that are high in strength used in reinforced cement concrete (RCC) work. It is the latest induction in the MS steel bars with superior properties such as strength, ductility, welding ability, bending ability and highest quality standards at international level.

Characteristics of TMT Rebars
Better ductility and malleability
High yield strength and toughness
More bonding strength
Earthquake resistance
Corrosion resistance
High thermal resistance
Economical and safe in use
No loss in strength at welded joints
Ordinary electrodes used for welding the joints
2. High Strength Deformed Bars
High strength deformed bars are cold twisted steel bars with lugs, ribs, projection or deformation on the surface. It the extensively and majorly used for reinforcement purposes in a construction. These bars are produced in sizes or sections from 4 mm to 50 mm in diameter.

It consist of brass castings, rolled brass, rod brass, tubing brass and miscellaneous brasses free of manganese bronze, aluminium bronze and unsweated radiators or parts, iron dirt and corroded material. Impurities ranging from 2% to 4% maximum.