We offer mix of tested LCD Laptop panels (from 11inches to 17inches) / LED Laptop panels (from 11inches to 14inches) / Monitor display panels (from 17 inches to 27 inches) in size.
Quantity: 1 x 40 HQ container (container can fit up to 10K pieces of cpanels)
Our transportation department consists exclusively of experienced professionals in their own areas.
Our customers do not have to waste time searching for a new transport company for delivery on a new route or by changing the type of product, as we offer a wide range of services in various directions.
We specialize in transportation from all european countries (portugal, spain, france, great britain, ireland, holland, belgium, denmark, germany, switzerland, italy, austria, slovenia, czech republic, slovakia, hungary, bulgaria, romania, greece, croatia, serbia, turkey, norway, sweden, poland) to russia, kazakhstan, kyrgyzstan, uzbekistan, tajikistan, turkmenistan and mongolia. During our work time in logistics, we are experienced in nuances and details of cargo transportation to / from different countries and have gained extensive experience in the delivery of various goods (equipment, cranes, construction, building materials, agricultural machinery, tires, furniture, paper products, chemical products, perfumes and cosmetics, food food, clothing, and etc.).
Type of transport:
• standard tilt trucks; volume ranged 80 to 92 m3., capacity up to 20 tons.
• mega trucks having height 2.80-3.00 m.
• road-trains up to 120 m3, height 2.80-3.00 m.
• small trucks up to 8 tons.
• platforms for transportation of oversized cargo.
We transport - full / partial / oversized cargo.
Type of transport:
• standard tilt trucks; volume ranged 80 to 92 m3., capacity up to 20 tons.
• mega trucks having height 2.80-3.00 m.
• road-trains up to 120 m3, height 2.80-3.00 m.
• small trucks up to 8 tons.
• platforms for transportation of oversized cargo.
Advantages of panel – frame houses:
Our houses are ecologic and warm, assembled fast (within couple weeks). Mounting and assembling could be done in any season; there are minimal so called wet production processes. Fast mounting does not require temporary premises or big storage rooms on a site. There is a possibility to disassemble, which is important for temporary premises. The homes could be finished by the homeowners themselves. Elements (walls, floors and roof) of wooden panel house are prefabricated and preassembled from structural panels in our specialized workshops. It allows us to achieve high quality of work, because when the works are carried out inside of premises, elements of the house are affected by unfavourable weather, it is easier to control working conditions and there are more possibilities to use special equipment.
Mounting:
The houses are usually mounted straight from the trucks or containers by means of a crane, which is as a rule needed for the first 2-3 days or could be even a week, if the house is bigger. Average size building fits into two – three trucks. For the assembly of a house, modern sealing materials, galvanized fasteners and anchors (for anchoring to the foundation) are used. Our houses can be mounted and assembled by other subcontractors - construction companies or even homeowners themselves.
Composition of external wall panels:
As a standard, gypsum plasterboard, which has a fire factor of 1 hour, or wooden cladding planks and non-flammable PE vapour barrier film are installed from the inside of wall panel. Oriented strand board (OSB) or wooden cladding planks along with the wind protection film are installed from outside of wall panels. Mineral wool insulation is preinstalled between the vertical studs inside of panels. Other compositions of walls are also possible based upon requirements set by the country code and individual.
Composition of internal wall panels – partitioning and load-bearing walls:;
Timber frame is made from 95÷125 mm and 145÷195 mm thickness planed off studs respectively, mineral wool insulation is preinstalled for sound isolation. Panels are covered by plasterboards or other above mentioned materials.
Floor – ceiling platform:
Floor is produced from panels, which are made from 60x220 or 80x220 mm cross-section beams (depending upon planned static loads). On the upper side of the panel 22mm OSB is attached to improve the stiffness. In order to achieve minimal sound isolation cavities of the platform are filled by 100 mm insulation of mineral wool and full thickness is filled near external walls.
Roof construction:
Roof is produced out of joists and rafters, cross-sectional dimensions of which are usually 50÷60 x 200÷220 mm. Roof beams - joists are made from glued laminated/ glulam wooden beams based on static calculations. As per customer request, where possible, we try to preassemble roof panels including attic finishing materials and roof assembly including covering materials. Structural elements of the roof can be supplied loose or preassembled as roof panels.
Thermal resistance of timber frame panel houses:
Depending on the chosen materials, the resistance of walls is not less than 5.00m2 K/W and the resistance of roof is not less than 6.00 m2 K/W. Usually, additional finishing of outer walls is recommended for panel houses, therefore further thermal insulation is also possible.
Special installations:
Heating pipes, communication lines (low current - alarm systems, internet and television) and water supply and waste water systems are usually laid inside the flooring on the basis of chosen technical system. Panelled walls are designed and construed having in mind abovementioned systems and connections. These jobs are usually done by the local skilled and authorized personnel.
Facade of the house:
An individual outlook for the exterior of the house could be obtained by chosen materials. External decoration of panel walls is carried out using various materials: cladding, cement, stone plates, boards, brick finishing or plastering.Upon request of a customer house set could be delivered with preinstalled windows and entrance doors, garage doors, roofing cover, external staircase, perform their installation.
Price:
It depends upon area of external, internal walls, floor, construction of roof, balconies, thicknesses of elements and their finishing, number of elements, scope of a project. The price for a mirror or typical project is reduced. First, we estimate the price of basic structures of the house and at the moment varies from 260 EUR to 600 EUR per one square meter of living area. In order to have the price for the complete house, you have to know what kind of: floor cover; plumbing system; type of heating system; windows material, U-value, locks, colour, opening directions, etc.; type of wood for the external (outdoor use) staircase; roofing cover and rain drainage system; external and internal decoration / finishing materials such as plasterboards or wooden cladding, etc. Final price of individual project could be estimated knowing all the details and materials, in the best case when detailed working drawing are issued and based on the latest changes an updated specification – list of materials is issued.
.Logistics project management, freight forwarder, road transportation service provide, transportation and storage services, international road transport services provider
Our rubber buffings sizes ranging from 1cm to 7cm length.
Description: our Rubber Buffings are made from 100% Recycled Rubber. SBR buffing are used in gardening and landscaping projects but also not less commonly used on pour-in-place playgrounds as the base layer material. With rubber buffing you are getting soft, cushioned child friendly surfaces throughout your garden and play areas.
Benefits (for gardening and ground areas):
The tire buffing are much heavier then natural wood buffings therefore it is much durable;
aesthetically enhances walkways and play areas also landscaping as well;
requires no maintenance;
it keeps weeds down and makes trimming easier;
it can be color coded to adjust your requirements for environment;
cushioned (minktas);
simple to install;
safe;
shock absorbing;
anti slip;
sound proofing.
Available colors: RED, BLACK, GREEN, GREY.
Packaging: in bags of 30 kg or big bags; loose loading in ships (containers); trains (wagons); trucks (24 ton).
We are producing premium quality timber garages and arbors. We can offer you already made projects or we can develop a project especially for you. Features can be added or removed according to your price range or wish. You can choose from ECO tailored made.
Our products are made under special technology that allows to assemble the building very quickly and easy for everyone.
We are also using the most modern technique so we always deliver 100% quality and precision.
Please note the price range is around 370$ - 380$ CIF.
Packing comes according to the buyer's needs.
In order to start with the project we require the following:
LOI, similar to the draft above.
BCL
The seller is based in London. we are able to organize meetings face-to-face after signing the FCO and sending the ICPO, to show documents and certificates (previous performance documents, allocation certificates, export certificates ... etc) to the buyer, to feel more confident about our seller.
please note too, that the Max Qts to supply is 50k mt Monthly, and might consider increasing to 75k MT, after the first 3 months.
